Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Hai Chen has a total of 9 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Quantitative Study on the Influence of Runway Compaction and Structural Design Parameters on Cumulative Settlement of the Silt Subgrade

    by Yiheng Pan, Yongqi Zhang, Qiqi Luo, Hai Chen, Fanqin Zeng

    Airport pavement damage is mostly caused by the cumulative effect of subgrade settlement, but existing calculations for subgrade cumulative settlement seldom consider the dynamic variation characteristics of the degree of compaction of subgrade soil under repeated loading. Accordingly, based on the proposed modified bounding-surface model for silt, numerical simulations of runway cumulative settlement under cyclic impact aircraft loading are performed. The study first reveals the quantitative influences of pavement structural parameters on runway cumulative settlement under conventional layered compaction of subgrade. Then, under different structural parameters, the differences in runway settlement between overall and layered compaction of subgrade are compared quantitatively. The following conclusions are drawn: First, as pavement parameters increase, the influence of parameters of the surface layer and the thickness of the base course increases greatly, whereas the influence of the elastic modulus of the base course decreases. Second, the maximum increments of cumulative settlement and its change rate induced by the layered compaction form are 63% and 88%, respectively. As the thickness of the surface layer exceeds 0.36 m, the influence of compaction form can be neglected. Therefore, appropriate ranges of pavement parameters can effectively decrease the effect of compaction form. Third, as the thicknesses of the surface layer and the base course are less than 0.31 m and 0.28 m, respectively, and the elastic modulus of the base course is greater than 1.6 GPa, the sensitivity of settlement to changes in pavement parameters is less affected by different compaction forms, and the influence of the compaction form can be ignored in optimization of the elastic modulus of the surface layer.

  • Open Access

    Mechanical and Deformation Performance of Masonry Walls with Low-Strength Mortar Retrofitting Using Spray-on Polyurethane Coating

    by Hai Chen, Yang Liu, Ying Tian, Qunxian Huang

    This study aimed to investigate the feasibility and effectiveness of spray-on polyurethane coating as a seismic strengthening method for rural masonry buildings. Three masonry wall specimens were tested under cyclic lateral loading, including a control specimen, a single-side strengthened specimen, and a double-side strengthened specimen. Digital image correlation (DIC) techniques were used to evaluate full-field strain, crack width, and failure progression in a non-contact manner. The seismic performances were compared in terms of failure mode, hysteretic behavior, skeleton curve, deformation performance, energy dissipation capacity, and stiffness degradation. Results indicated that a spray-on polyurethane coating effectively delayed the onset and progression of cracks, postponing the peak load and slowing strength and stiffness degradation. Compared to the unstrengthened specimen, the bearing capacity, ultimate displacement, and cumulative energy dissipation of the single-side strengthened specimen increased by 20%, 60%, and 514%, respectively. Compared to the single-side strengthened specimen, the double-side strengthened specimen BW-D exhibited improved integrity, deformation capacity, and energy dissipation capacity. Its ultimate displacement and cumulative energy dissipation increased by 28% and 10%, respectively.