Xianxia Yuan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xianxia Yuan has a total of 100 co-authors. Here are the top co-authors by number of shared publications:
- Zi-Feng Ma
Shanghai Jiao Tong University
15 shared publications Wenrui Wei
School of Chemistry and Chemical Engineering Shanghai Jiao Tong University Shanghai China
14 shared publications- Rizwan Haider
School of Chemistry and Chemical Engineering Shanghai Jiao Tong University Shanghai P. R. China
11 shared publications Liang Wu
9 shared publicationsShengqi Ding
School of Chemistry and Chemical Engineering Shanghai Jiao Tong University Shanghai 200240 China
9 shared publications- Liang Wu
Shanghai Jiao Tong University
7 shared publications
Latest Publications
- 3 November 2026
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (45) , 21097-21107
Uniform Repair of Spent NCM through a Hydrogen-Bonded Organic Framework-Assisted Process
Direct regeneration of spent layered cathode materials is a promising recycling strategy, but it is still limited by non-uniform lithium distribution during relithiation. Herein, a hydrogen-bonded organic framework (HOF)-mediated regeneration strategy is proposed to achieve uniform lithium replenishment and structural reconstruction of degraded LiNi0.5Co0.2Mn0.3O2 (NCM523) cathodes. Density functional theory calculations and time-of-flight secondary ion mass spectrometry results demonstrate that HOF promotes the homogeneous distribution of lithium ions, enhances lithium-ion adsorption, and facilitates subsequent bulk diffusion during sintering. As a result, the regenerated cathode exhibits reduced Li/Ni cation mixing, restored layered structure, better Li+ transfer kinetics, and improved electrochemical performance approaching that of commercial NCM523. Moreover, life cycle assessment and techno-economic analysis demonstrate the environmental and economic advantages of the proposed strategy. This work provides an effective approach for the sustainable regeneration of spent layer-structured cathode materials.
- 3 November 2026
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (45) , 21097-21107
Uniform Repair of Spent NCM through a Hydrogen-Bonded Organic Framework-Assisted Process
Direct regeneration of spent layered cathode materials is a promising recycling strategy, but it is still limited by non-uniform lithium distribution during relithiation. Herein, a hydrogen-bonded organic framework (HOF)-mediated regeneration strategy is proposed to achieve uniform lithium replenishment and structural reconstruction of degraded LiNi0.5Co0.2Mn0.3O2 (NCM523) cathodes. Density functional theory calculations and time-of-flight secondary ion mass spectrometry results demonstrate that HOF promotes the homogeneous distribution of lithium ions, enhances lithium-ion adsorption, and facilitates subsequent bulk diffusion during sintering. As a result, the regenerated cathode exhibits reduced Li/Ni cation mixing, restored layered structure, better Li+ transfer kinetics, and improved electrochemical performance approaching that of commercial NCM523. Moreover, life cycle assessment and techno-economic analysis demonstrate the environmental and economic advantages of the proposed strategy. This work provides an effective approach for the sustainable regeneration of spent layer-structured cathode materials.
- 15 October 2026
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 1083
Spent-battery-derived Mn-Co-Ni9S8 to achieve industrial-scale current densities for alkaline water splitting
- 15 October 2026
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 1083
Spent-battery-derived Mn-Co-Ni9S8 to achieve industrial-scale current densities for alkaline water splitting
- 16 August 2026
- Published by Wiley in ChemSusChem
- Vol. 19 (16) , e70973
Applications of Electrothermal Shock for Synthesis and Reuse of Cathode Materials in Lithium‐Ion Batteries
The worldwide promotion for carbon neutrality has driven a pressing demand for advancements in lithium‐ion batteries (LIBs) technology and the closed‐loop recycling for retired batteries. While the production of LIBs cathode materials is mature in industrial‐scale, evolving requirements for higher energy density, lower cost, and better sustainability call for breakthroughs in traditional synthesis and recycling approaches. With an ultrafast heating rate exceeding 10 3 °C s −1 , electrothermal shock (ETS) technology achieves rapid thermal process featuring unique advantages in both kinetic and thermodynamic regulations. For LIBs cathode materials synthesis, this approach enhances the electrochemical performance while significantly reduces the energy consumption. In the case of spent LIBs cathode recycling, ETS technology enables regeneration through targeted elemental supplementation and phase reconstruction, effectively addressing the interfacial degradation, phase collapse, and elemental loss. This review summarizes the latest advancements in the application of ETS technology for LIBs cathode materials synthesis and reuse, with a particular focus on the reaction mechanisms and technical advantages. Moreover, the primary challenges and industrial scalability are also assessed while identifying the key future directions, providing technical blueprint for establishing LIBs circular economy systems.
- 16 August 2026
- Published by Wiley in ChemSusChem
- Vol. 19 (16) , e70973
Applications of Electrothermal Shock for Synthesis and Reuse of Cathode Materials in Lithium‐Ion Batteries
The worldwide promotion for carbon neutrality has driven a pressing demand for advancements in lithium‐ion batteries (LIBs) technology and the closed‐loop recycling for retired batteries. While the production of LIBs cathode materials is mature in industrial‐scale, evolving requirements for higher energy density, lower cost, and better sustainability call for breakthroughs in traditional synthesis and recycling approaches. With an ultrafast heating rate exceeding 10 3 °C s −1 , electrothermal shock (ETS) technology achieves rapid thermal process featuring unique advantages in both kinetic and thermodynamic regulations. For LIBs cathode materials synthesis, this approach enhances the electrochemical performance while significantly reduces the energy consumption. In the case of spent LIBs cathode recycling, ETS technology enables regeneration through targeted elemental supplementation and phase reconstruction, effectively addressing the interfacial degradation, phase collapse, and elemental loss. This review summarizes the latest advancements in the application of ETS technology for LIBs cathode materials synthesis and reuse, with a particular focus on the reaction mechanisms and technical advantages. Moreover, the primary challenges and industrial scalability are also assessed while identifying the key future directions, providing technical blueprint for establishing LIBs circular economy systems.
Dual‐Site Assisted Efficient Alkaline Hydrogen Evolution Reaction on NiS/VS 2 @NF
Engineering non‐noble metal heterostructure interfaces with multiple active sites is a promising strategy to overcome scaling relationships and enhance multistep reactions. Herein, a dual‐site heterogeneous catalyst of NiS/VS 2 @NF is developed by wrapping VS 2 on NiS bacillar structures supported on nickel foam, which promotes alkaline hydrogen evolution reaction (HER) at high current densities. In situ spectroscopic analysis and theoretical calculations revealed that strong interaction of V and Ni at the interface generates a distinctive electronic environment where both metal sites facilitate water adsorption, electron‐deficient V sites expedite water dissociation, electron‐rich Ni sites promote OH desorption, and V and Ni sites together help to streamline hydrogen coupling and the subsequent release via the Volmer‐Heyrovsky pathway. The as‐prepared NiS/VS 2 @NF requires only 222 and 279 mV to reach 0.5 and 1 A cm −2 , respectively, in 1 m KOH, and exhibits negligible change in current density over 140 h of continuous operation at −0.2 V RHE . This performance is not only better than that of Pt/C@NF, but also surpasses most of the recently reported transition metal sulfide‐based materials. This work offers critical insights into designing advanced catalysts for high‐performance alkaline HER and understanding their mechanism, with implications extending to a broad range of electrochemical applications.
Dual‐Site Assisted Efficient Alkaline Hydrogen Evolution Reaction on NiS/VS 2 @NF
Engineering non‐noble metal heterostructure interfaces with multiple active sites is a promising strategy to overcome scaling relationships and enhance multistep reactions. Herein, a dual‐site heterogeneous catalyst of NiS/VS 2 @NF is developed by wrapping VS 2 on NiS bacillar structures supported on nickel foam, which promotes alkaline hydrogen evolution reaction (HER) at high current densities. In situ spectroscopic analysis and theoretical calculations revealed that strong interaction of V and Ni at the interface generates a distinctive electronic environment where both metal sites facilitate water adsorption, electron‐deficient V sites expedite water dissociation, electron‐rich Ni sites promote OH desorption, and V and Ni sites together help to streamline hydrogen coupling and the subsequent release via the Volmer‐Heyrovsky pathway. The as‐prepared NiS/VS 2 @NF requires only 222 and 279 mV to reach 0.5 and 1 A cm −2 , respectively, in 1 m KOH, and exhibits negligible change in current density over 140 h of continuous operation at −0.2 V RHE . This performance is not only better than that of Pt/C@NF, but also surpasses most of the recently reported transition metal sulfide‐based materials. This work offers critical insights into designing advanced catalysts for high‐performance alkaline HER and understanding their mechanism, with implications extending to a broad range of electrochemical applications.
Stereochemically Active Lone Pairs Promoted High Rate Potassium‐Ion Storage in Bismuth Sulfide
Bismuth sulfide (Bi 2 S 3 ) is a promising potassium‐ion battery anode candidate due to its high theoretical capacity and cost‐effectiveness. However, it experiences severe volume variation and structure collapse during potassiation/depotassiation, leading to inferior cycling stability and rate performance. Herein, a novel stereochemically active lone pairs (SCALP)‐oriented strategy integrated with structural engineering is proposed. Guided by density functional theory calculations predicting that controlled lattice distortion can tune SCALP behavior, a rationally designed Bi 2 S 3 anchored within hollow carbon spheres (HCS@Bi 2 S 3 ) is synthesized via controlling sulfidation time. SCALP‐oriented approach narrows band gap and strengthens K + adsorption, improving redox reaction kinetics coupled with efficient ion‐transport pathways in well‐crystallized regions; HCS alleviates volumetric expansion and suppresses potassium‐polysulfide dissolution and shuttling. HCS@Bi 2 S 3 ‐3 delivers high reversible capacity (471.5 mAh g −1 at 200 mA g −1 ), good high‐rate long‐term cycling stability (147.3 mAh g −1 after 1000 cycles at 10 A g −1 ), and excellent rate capability (128.4 mAh g −1 at 12 A g −1 ). Full cell paired with 3,4,9,10‐perylenetetracarboxylic dianhydride cathode delivers exciting cycling stability, indicating the practical applications potential of HCS@Bi 2 S 3 ‐3. This work highlights SCALP‐modulation as a fundamental strategy optimizing electronic properties, while HCS mitigates volume changes, offering a new pathway for developing fast and stable potassium storage anodes using metal chalcogenides.
Stereochemically Active Lone Pairs Promoted High Rate Potassium‐Ion Storage in Bismuth Sulfide
Bismuth sulfide (Bi 2 S 3 ) is a promising potassium‐ion battery anode candidate due to its high theoretical capacity and cost‐effectiveness. However, it experiences severe volume variation and structure collapse during potassiation/depotassiation, leading to inferior cycling stability and rate performance. Herein, a novel stereochemically active lone pairs (SCALP)‐oriented strategy integrated with structural engineering is proposed. Guided by density functional theory calculations predicting that controlled lattice distortion can tune SCALP behavior, a rationally designed Bi 2 S 3 anchored within hollow carbon spheres (HCS@Bi 2 S 3 ) is synthesized via controlling sulfidation time. SCALP‐oriented approach narrows band gap and strengthens K + adsorption, improving redox reaction kinetics coupled with efficient ion‐transport pathways in well‐crystallized regions; HCS alleviates volumetric expansion and suppresses potassium‐polysulfide dissolution and shuttling. HCS@Bi 2 S 3 ‐3 delivers high reversible capacity (471.5 mAh g −1 at 200 mA g −1 ), good high‐rate long‐term cycling stability (147.3 mAh g −1 after 1000 cycles at 10 A g −1 ), and excellent rate capability (128.4 mAh g −1 at 12 A g −1 ). Full cell paired with 3,4,9,10‐perylenetetracarboxylic dianhydride cathode delivers exciting cycling stability, indicating the practical applications potential of HCS@Bi 2 S 3 ‐3. This work highlights SCALP‐modulation as a fundamental strategy optimizing electronic properties, while HCS mitigates volume changes, offering a new pathway for developing fast and stable potassium storage anodes using metal chalcogenides.
- 27 January 2026
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 11 (2) , 1950-1957
Long-Lived and Mechanical-Abuse-Tolerant Semisolid Slurry Batteries
- 27 January 2026
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 11 (2) , 1950-1957
Long-Lived and Mechanical-Abuse-Tolerant Semisolid Slurry Batteries
- 18 July 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (33) , 27638-27648
Enabling Cr-induced efficient hydrogen evolution on high-entropy alloys via rapid thermal shock
Achieving efficient construction and regulation of active sites in complex high-entropy systems is crucial for developing high-entropy alloys (HEAs) as top-notch catalysts for the hydrogen evolution reaction (HER). Herein, a rapid thermal shock process coupled with Cr content regulation was employed to fabricate a self-supporting PtFeCoNiCuCr0.5@CC-720 HEA material, which exhibits a low HER overpotential of 83 mV to achieve 100 mA cm−2 in KOH electrolyte. Based on experiments and density functional theory (DFT) calculations, the influence of Cr content on the microstructure as well as HER electrocatalytic activity was elucidated. It was revealed that incorporation of Cr enhances the crystallinity of the HEA material, accelerates the electron transfer rate, and modulates the electronic configuration of active sites due to its low electronegativity induced electron-donating effect. As a result, the d-band center of Pt sites was shifted towards the Fermi level, leading to optimized Gibbs free energy for hydrogen species adsorption/desorption and improved HER activity. This work offers a perspective for rapid regulation of HER activity on high entropy alloys and is helpful for designing electrocatalysts with enhanced activity.
- 18 July 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (33) , 27638-27648
Enabling Cr-induced efficient hydrogen evolution on high-entropy alloys via rapid thermal shock
Achieving efficient construction and regulation of active sites in complex high-entropy systems is crucial for developing high-entropy alloys (HEAs) as top-notch catalysts for the hydrogen evolution reaction (HER). Herein, a rapid thermal shock process coupled with Cr content regulation was employed to fabricate a self-supporting PtFeCoNiCuCr0.5@CC-720 HEA material, which exhibits a low HER overpotential of 83 mV to achieve 100 mA cm−2 in KOH electrolyte. Based on experiments and density functional theory (DFT) calculations, the influence of Cr content on the microstructure as well as HER electrocatalytic activity was elucidated. It was revealed that incorporation of Cr enhances the crystallinity of the HEA material, accelerates the electron transfer rate, and modulates the electronic configuration of active sites due to its low electronegativity induced electron-donating effect. As a result, the d-band center of Pt sites was shifted towards the Fermi level, leading to optimized Gibbs free energy for hydrogen species adsorption/desorption and improved HER activity. This work offers a perspective for rapid regulation of HER activity on high entropy alloys and is helpful for designing electrocatalysts with enhanced activity.
Modulating Support Effect in High‐Entropy Sulfide via La Single‐Atom for Boosted Oxygen Evolution
Reduced energy barrier induced enhanced oxygen evolution reaction (OER) kinetics can be achieved by implementing an efficient electrocatalyst. Herein, positive effect of lanthanum (La) single‐atom modified hollow carbon sphere (HCS) support on OER activity of high‐entropy sulfide (HES) material (FeCoNiCrCuAl)S has been reported. Briefly, La single‐atom boosts the aggregation of electrons at adjacent Fe, Co, Ni, Cr, and Cu sites and dissipation of electrons at Al site in HES material, facilitating reconstruction of electronic structure and down‐shifting their d‐band center away from Fermi level, resulting in reduced adsorption energy of OER intermediates. As developed (FeCoNiCrCuAl)S@La‐HCS depicts high OER performance with an overpotential of only 297 mV at 100 mA cm−2, surpassing (FeCoNiCrCuAl)S@HCS (324 mV) and commercial RuO2 catalyst (419 mV). This work provides an insight into the integration of single atom with high‐entropy sulfide toward efficient oxygen evolution.
Modulating Support Effect in High‐Entropy Sulfide via La Single‐Atom for Boosted Oxygen Evolution
Reduced energy barrier induced enhanced oxygen evolution reaction (OER) kinetics can be achieved by implementing an efficient electrocatalyst. Herein, positive effect of lanthanum (La) single‐atom modified hollow carbon sphere (HCS) support on OER activity of high‐entropy sulfide (HES) material (FeCoNiCrCuAl)S has been reported. Briefly, La single‐atom boosts the aggregation of electrons at adjacent Fe, Co, Ni, Cr, and Cu sites and dissipation of electrons at Al site in HES material, facilitating reconstruction of electronic structure and down‐shifting their d‐band center away from Fermi level, resulting in reduced adsorption energy of OER intermediates. As developed (FeCoNiCrCuAl)S@La‐HCS depicts high OER performance with an overpotential of only 297 mV at 100 mA cm−2, surpassing (FeCoNiCrCuAl)S@HCS (324 mV) and commercial RuO2 catalyst (419 mV). This work provides an insight into the integration of single atom with high‐entropy sulfide toward efficient oxygen evolution.
- 5 April 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (15) , 22812-22821
Synergistic Effect of N-Doped Carbon and Mn in NiFe LDH To Achieve 1 A cm–2 Current Density for the Oxygen Evolution Reaction
The development of highly efficient oxygen evolution reaction (OER) electrocatalysts is pivotal to enhance the performance of alkaline water electrolyzers. Herein, a facile two-step electrodeposition method is developed for the fabrication of nitrogen-doped carbon (NC) and manganese-incorporated NiFe layered double hydroxides (LDHs) supported on Ni foam (NF). When evaluated in 1.0 M KOH solution, the optimized material of NC20-Mn-NiFe LDH showed excellent OER performance requiring low overpotentials of 298 and 331 mV to achieve high current densities of 500 and 1000 mA cm-2, respectively, and no loss in current density was observed at fixed potentials of 1.53 and 1.57 V for 125 h in each case. This performance is not only better than that of the state-of-the-art RuO2/NF but also most of the recently reported LDH-based catalysts. Such a remarkable performance is mainly attributed to the vertical growth of NC20-Mn-NiFe LDH sheets on NF, facilitated electron transfer and charge density modulation on the active metal sites due to the electron-withdrawing and electron-donating effects of NC and Mn, respectively, resulting in the shift of the rate-determining step from OOH* formation to O2 desorption with decreased free energy. This research work provides further insights into modulating the structure of LDH-based materials to achieve a high OER performance delivering industrial-level current densities at low overpotentials.
- 5 April 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (15) , 22812-22821
Synergistic Effect of N-Doped Carbon and Mn in NiFe LDH To Achieve 1 A cm–2 Current Density for the Oxygen Evolution Reaction
The development of highly efficient oxygen evolution reaction (OER) electrocatalysts is pivotal to enhance the performance of alkaline water electrolyzers. Herein, a facile two-step electrodeposition method is developed for the fabrication of nitrogen-doped carbon (NC) and manganese-incorporated NiFe layered double hydroxides (LDHs) supported on Ni foam (NF). When evaluated in 1.0 M KOH solution, the optimized material of NC20-Mn-NiFe LDH showed excellent OER performance requiring low overpotentials of 298 and 331 mV to achieve high current densities of 500 and 1000 mA cm-2, respectively, and no loss in current density was observed at fixed potentials of 1.53 and 1.57 V for 125 h in each case. This performance is not only better than that of the state-of-the-art RuO2/NF but also most of the recently reported LDH-based catalysts. Such a remarkable performance is mainly attributed to the vertical growth of NC20-Mn-NiFe LDH sheets on NF, facilitated electron transfer and charge density modulation on the active metal sites due to the electron-withdrawing and electron-donating effects of NC and Mn, respectively, resulting in the shift of the rate-determining step from OOH* formation to O2 desorption with decreased free energy. This research work provides further insights into modulating the structure of LDH-based materials to achieve a high OER performance delivering industrial-level current densities at low overpotentials.