Rizwan Haider
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Rizwan Haider has a total of 65 co-authors. Here are the top co-authors by number of shared publications:
- Xianxia Yuan
School of Chemistry and Chemical Engineering Shanghai Jiao Tong University Shanghai China
11 shared publications Wenrui Wei
School of Chemistry and Chemical Engineering Shanghai Jiao Tong University Shanghai P. R. China
7 shared publications- Ayaz Muzammil
School of Chemistry and Chemical Engineering Shanghai Jiao Tong University Shanghai China
5 shared publications - Liang Wu
Shanghai Jiao Tong University
4 shared publications - Muhammad Zahid
Department of Chemistry, University of Agriculture Faisalabad, Faisalabad 38000, Pakistan
4 shared publications Yu Huang
School of Chemistry and Chemical Engineering, Shanghai Jiao Tong University, Shanghai 200240, People’s Republic of China
4 shared publications
Latest Publications
- 15 October 2026
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 1083
Spent-battery-derived Mn-Co-Ni9S8 to achieve industrial-scale current densities for alkaline water splitting
- 15 October 2026
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 1083
Spent-battery-derived Mn-Co-Ni9S8 to achieve industrial-scale current densities for alkaline water splitting
Dual‐Site Assisted Efficient Alkaline Hydrogen Evolution Reaction on NiS/VS 2 @NF
Engineering non‐noble metal heterostructure interfaces with multiple active sites is a promising strategy to overcome scaling relationships and enhance multistep reactions. Herein, a dual‐site heterogeneous catalyst of NiS/VS 2 @NF is developed by wrapping VS 2 on NiS bacillar structures supported on nickel foam, which promotes alkaline hydrogen evolution reaction (HER) at high current densities. In situ spectroscopic analysis and theoretical calculations revealed that strong interaction of V and Ni at the interface generates a distinctive electronic environment where both metal sites facilitate water adsorption, electron‐deficient V sites expedite water dissociation, electron‐rich Ni sites promote OH desorption, and V and Ni sites together help to streamline hydrogen coupling and the subsequent release via the Volmer‐Heyrovsky pathway. The as‐prepared NiS/VS 2 @NF requires only 222 and 279 mV to reach 0.5 and 1 A cm −2 , respectively, in 1 m KOH, and exhibits negligible change in current density over 140 h of continuous operation at −0.2 V RHE . This performance is not only better than that of Pt/C@NF, but also surpasses most of the recently reported transition metal sulfide‐based materials. This work offers critical insights into designing advanced catalysts for high‐performance alkaline HER and understanding their mechanism, with implications extending to a broad range of electrochemical applications.
Dual‐Site Assisted Efficient Alkaline Hydrogen Evolution Reaction on NiS/VS 2 @NF
Engineering non‐noble metal heterostructure interfaces with multiple active sites is a promising strategy to overcome scaling relationships and enhance multistep reactions. Herein, a dual‐site heterogeneous catalyst of NiS/VS 2 @NF is developed by wrapping VS 2 on NiS bacillar structures supported on nickel foam, which promotes alkaline hydrogen evolution reaction (HER) at high current densities. In situ spectroscopic analysis and theoretical calculations revealed that strong interaction of V and Ni at the interface generates a distinctive electronic environment where both metal sites facilitate water adsorption, electron‐deficient V sites expedite water dissociation, electron‐rich Ni sites promote OH desorption, and V and Ni sites together help to streamline hydrogen coupling and the subsequent release via the Volmer‐Heyrovsky pathway. The as‐prepared NiS/VS 2 @NF requires only 222 and 279 mV to reach 0.5 and 1 A cm −2 , respectively, in 1 m KOH, and exhibits negligible change in current density over 140 h of continuous operation at −0.2 V RHE . This performance is not only better than that of Pt/C@NF, but also surpasses most of the recently reported transition metal sulfide‐based materials. This work offers critical insights into designing advanced catalysts for high‐performance alkaline HER and understanding their mechanism, with implications extending to a broad range of electrochemical applications.
- 11 November 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (47) , 65362-65372
Charging Voltage-Dependent Interphase Stabilization Enabling Wide-Temperature High-Voltage Li/LiCoO 2 Battery
Designing electrolytes that endure both high voltage and wide temperature extremes remains a key barrier to lithium metal batteries (LMBs). Here, a charging voltage-driven interfacial stabilization strategy is presented to construct a robust interphase with a thin organic layer over a LiF/borate-rich matrix, which effectively passivates both the lithium metal and cathode surface. Attributed to these superiorities, Li/LiCoO2 cells achieve 88% capacity retention over 900 cycles at high voltage (0.5 C, 4.5 V), 83% after 300 cycles at 60 °C (3 C, 3-4.6 V), and 72% after 200 cycles at room temperature (1 C, 3-4.7 V). Even under extreme cold (-40 °C), the cell retains 92% capacity over 200 cycles at 4.6 V, reflecting superior interfacial robustness. This finding inspires researchers to reconsider the specific requirements for the cathode electrolyte interphase by tuning charging voltage rather than exclusively regulating solvation structure, progressing the development for high-voltage LMBs in extreme conditions.
- 11 November 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (47) , 65362-65372
Charging Voltage-Dependent Interphase Stabilization Enabling Wide-Temperature High-Voltage Li/LiCoO 2 Battery
Designing electrolytes that endure both high voltage and wide temperature extremes remains a key barrier to lithium metal batteries (LMBs). Here, a charging voltage-driven interfacial stabilization strategy is presented to construct a robust interphase with a thin organic layer over a LiF/borate-rich matrix, which effectively passivates both the lithium metal and cathode surface. Attributed to these superiorities, Li/LiCoO2 cells achieve 88% capacity retention over 900 cycles at high voltage (0.5 C, 4.5 V), 83% after 300 cycles at 60 °C (3 C, 3-4.6 V), and 72% after 200 cycles at room temperature (1 C, 3-4.7 V). Even under extreme cold (-40 °C), the cell retains 92% capacity over 200 cycles at 4.6 V, reflecting superior interfacial robustness. This finding inspires researchers to reconsider the specific requirements for the cathode electrolyte interphase by tuning charging voltage rather than exclusively regulating solvation structure, progressing the development for high-voltage LMBs in extreme conditions.
- 18 July 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (33) , 27638-27648
Enabling Cr-induced efficient hydrogen evolution on high-entropy alloys via rapid thermal shock
Achieving efficient construction and regulation of active sites in complex high-entropy systems is crucial for developing high-entropy alloys (HEAs) as top-notch catalysts for the hydrogen evolution reaction (HER). Herein, a rapid thermal shock process coupled with Cr content regulation was employed to fabricate a self-supporting PtFeCoNiCuCr0.5@CC-720 HEA material, which exhibits a low HER overpotential of 83 mV to achieve 100 mA cm−2 in KOH electrolyte. Based on experiments and density functional theory (DFT) calculations, the influence of Cr content on the microstructure as well as HER electrocatalytic activity was elucidated. It was revealed that incorporation of Cr enhances the crystallinity of the HEA material, accelerates the electron transfer rate, and modulates the electronic configuration of active sites due to its low electronegativity induced electron-donating effect. As a result, the d-band center of Pt sites was shifted towards the Fermi level, leading to optimized Gibbs free energy for hydrogen species adsorption/desorption and improved HER activity. This work offers a perspective for rapid regulation of HER activity on high entropy alloys and is helpful for designing electrocatalysts with enhanced activity.
- 18 July 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (33) , 27638-27648
Enabling Cr-induced efficient hydrogen evolution on high-entropy alloys via rapid thermal shock
Achieving efficient construction and regulation of active sites in complex high-entropy systems is crucial for developing high-entropy alloys (HEAs) as top-notch catalysts for the hydrogen evolution reaction (HER). Herein, a rapid thermal shock process coupled with Cr content regulation was employed to fabricate a self-supporting PtFeCoNiCuCr0.5@CC-720 HEA material, which exhibits a low HER overpotential of 83 mV to achieve 100 mA cm−2 in KOH electrolyte. Based on experiments and density functional theory (DFT) calculations, the influence of Cr content on the microstructure as well as HER electrocatalytic activity was elucidated. It was revealed that incorporation of Cr enhances the crystallinity of the HEA material, accelerates the electron transfer rate, and modulates the electronic configuration of active sites due to its low electronegativity induced electron-donating effect. As a result, the d-band center of Pt sites was shifted towards the Fermi level, leading to optimized Gibbs free energy for hydrogen species adsorption/desorption and improved HER activity. This work offers a perspective for rapid regulation of HER activity on high entropy alloys and is helpful for designing electrocatalysts with enhanced activity.
- 5 April 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (15) , 22812-22821
Synergistic Effect of N-Doped Carbon and Mn in NiFe LDH To Achieve 1 A cm–2 Current Density for the Oxygen Evolution Reaction
The development of highly efficient oxygen evolution reaction (OER) electrocatalysts is pivotal to enhance the performance of alkaline water electrolyzers. Herein, a facile two-step electrodeposition method is developed for the fabrication of nitrogen-doped carbon (NC) and manganese-incorporated NiFe layered double hydroxides (LDHs) supported on Ni foam (NF). When evaluated in 1.0 M KOH solution, the optimized material of NC20-Mn-NiFe LDH showed excellent OER performance requiring low overpotentials of 298 and 331 mV to achieve high current densities of 500 and 1000 mA cm-2, respectively, and no loss in current density was observed at fixed potentials of 1.53 and 1.57 V for 125 h in each case. This performance is not only better than that of the state-of-the-art RuO2/NF but also most of the recently reported LDH-based catalysts. Such a remarkable performance is mainly attributed to the vertical growth of NC20-Mn-NiFe LDH sheets on NF, facilitated electron transfer and charge density modulation on the active metal sites due to the electron-withdrawing and electron-donating effects of NC and Mn, respectively, resulting in the shift of the rate-determining step from OOH* formation to O2 desorption with decreased free energy. This research work provides further insights into modulating the structure of LDH-based materials to achieve a high OER performance delivering industrial-level current densities at low overpotentials.
- 5 April 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (15) , 22812-22821
Synergistic Effect of N-Doped Carbon and Mn in NiFe LDH To Achieve 1 A cm–2 Current Density for the Oxygen Evolution Reaction
The development of highly efficient oxygen evolution reaction (OER) electrocatalysts is pivotal to enhance the performance of alkaline water electrolyzers. Herein, a facile two-step electrodeposition method is developed for the fabrication of nitrogen-doped carbon (NC) and manganese-incorporated NiFe layered double hydroxides (LDHs) supported on Ni foam (NF). When evaluated in 1.0 M KOH solution, the optimized material of NC20-Mn-NiFe LDH showed excellent OER performance requiring low overpotentials of 298 and 331 mV to achieve high current densities of 500 and 1000 mA cm-2, respectively, and no loss in current density was observed at fixed potentials of 1.53 and 1.57 V for 125 h in each case. This performance is not only better than that of the state-of-the-art RuO2/NF but also most of the recently reported LDH-based catalysts. Such a remarkable performance is mainly attributed to the vertical growth of NC20-Mn-NiFe LDH sheets on NF, facilitated electron transfer and charge density modulation on the active metal sites due to the electron-withdrawing and electron-donating effects of NC and Mn, respectively, resulting in the shift of the rate-determining step from OOH* formation to O2 desorption with decreased free energy. This research work provides further insights into modulating the structure of LDH-based materials to achieve a high OER performance delivering industrial-level current densities at low overpotentials.
- 23 October 2024
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 92, 207-233
Unveiling the multifaceted potential of copper sulfide heterojunctions for sustainable energy solutions
- 23 October 2024
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 92, 207-233
Unveiling the multifaceted potential of copper sulfide heterojunctions for sustainable energy solutions
- 24 June 2024
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 38 (13) , 12192-12201
Se–C Bond in SnSe2–Porous Biomass Carbon Boosting Fast and Durable Potassium Storage
- 24 June 2024
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 38 (13) , 12192-12201
Se–C Bond in SnSe2–Porous Biomass Carbon Boosting Fast and Durable Potassium Storage
- 28 February 2024
- Published by Elsevier in Chemical Engineering Journal
- Vol. 485
Unfolding the potassium storage mechanism of tin selenides
- 28 February 2024
- Published by Elsevier in Chemical Engineering Journal
- Vol. 485
Unfolding the potassium storage mechanism of tin selenides
- 1 November 2023
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 170 (11) , 114502
Hollow Nitrogen-Doped Carbon Spheres with Presiding Graphitic Nitrogen for Oxygen Reduction Reaction
Hollow nitrogen-doped carbons, a class of metal free electrocatalysts, offer a wide range of modifications due to their tunable diameter and carbon wall thickness. Herein, hollow nitrogen-doped carbon spheres (HNCS-1000) with numerous structural defects, thin carbon wall of about 8 nm, high (sp2-sp3)/sp3 bond ratio of 3.11 and graphitic-N proportion of 71.4% are prepared using a double pyrolysis strategy. When employed as ORR catalyst in O2-saturated 0.1 M KOH solution, HNCS-1000 retains high onset and halfwave potentials of 1.03 V and 0.88 V, respectively. In addition, it also demonstrates excellent stability/durability with 90.25% current density retention after 84000 s continuous chronoamperometric operation and only 33 mV loss in halfwave potential after 7000 CV cycles. Overall, the ORR performance of HNCS-1000 surpasses most of the previously reported nitrogen-doped carbon catalysts, and it is among the best catalysts for ORR in alkaline environment.
- 1 November 2023
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 170 (11) , 114502
Hollow Nitrogen-Doped Carbon Spheres with Presiding Graphitic Nitrogen for Oxygen Reduction Reaction
Hollow nitrogen-doped carbons, a class of metal free electrocatalysts, offer a wide range of modifications due to their tunable diameter and carbon wall thickness. Herein, hollow nitrogen-doped carbon spheres (HNCS-1000) with numerous structural defects, thin carbon wall of about 8 nm, high (sp2-sp3)/sp3 bond ratio of 3.11 and graphitic-N proportion of 71.4% are prepared using a double pyrolysis strategy. When employed as ORR catalyst in O2-saturated 0.1 M KOH solution, HNCS-1000 retains high onset and halfwave potentials of 1.03 V and 0.88 V, respectively. In addition, it also demonstrates excellent stability/durability with 90.25% current density retention after 84000 s continuous chronoamperometric operation and only 33 mV loss in halfwave potential after 7000 CV cycles. Overall, the ORR performance of HNCS-1000 surpasses most of the previously reported nitrogen-doped carbon catalysts, and it is among the best catalysts for ORR in alkaline environment.
- 7 August 2023
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 11 (34) , 18387-18397
Boosting the oxygen reduction reaction using high surface area graphitic-N dominant nitrogen doped carbon
A highly active, durable, and economical catalyst towards the oxygen reduction reaction (ORR) is the need of the day because of the scarce nature, high price, and meager stability of Pt/C, which is nowadays used as an efficient cathode catalyst for fuel cells. In this work, a ZIF-8-derived nitrogen doped carbon catalyst (NC-1000) with a high graphitic-N (52.4%) content, high surface area (3492 m2 g−1) and diverse porous 3D network structure is prepared by using a double pyrolysis strategy. In O2-saturated 0.1 M KOH solution, it shows significantly improved ORR performance with high onset potential (1.016 V vs. RHE) and half-wave potential (0.898 V vs. RHE), small Tafel slope (38.5 mV dec−1), and high limiting current density (−6.25 mA cm−2), justifying the fast charge transfer kinetics and high activity. This material also confers high ORR selectivity via the 4e− pathway and excellent stability/durability after either continuous chronoamperometric operation or the accelerated stress test. The ORR performance of NC-1000 is better than that of most of the previously reported nitrogen doped carbon catalysts, and the as-prepared NC-1000 is among the best catalysts for the ORR in an alkaline environment. Moreover, it was confirmed with DFT calculations that graphitic-N species are mainly responsible for the excellent ORR performance of NC-1000 following the associative mechanism.
- 7 August 2023
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 11 (34) , 18387-18397
Boosting the oxygen reduction reaction using high surface area graphitic-N dominant nitrogen doped carbon
A highly active, durable, and economical catalyst towards the oxygen reduction reaction (ORR) is the need of the day because of the scarce nature, high price, and meager stability of Pt/C, which is nowadays used as an efficient cathode catalyst for fuel cells. In this work, a ZIF-8-derived nitrogen doped carbon catalyst (NC-1000) with a high graphitic-N (52.4%) content, high surface area (3492 m2 g−1) and diverse porous 3D network structure is prepared by using a double pyrolysis strategy. In O2-saturated 0.1 M KOH solution, it shows significantly improved ORR performance with high onset potential (1.016 V vs. RHE) and half-wave potential (0.898 V vs. RHE), small Tafel slope (38.5 mV dec−1), and high limiting current density (−6.25 mA cm−2), justifying the fast charge transfer kinetics and high activity. This material also confers high ORR selectivity via the 4e− pathway and excellent stability/durability after either continuous chronoamperometric operation or the accelerated stress test. The ORR performance of NC-1000 is better than that of most of the previously reported nitrogen doped carbon catalysts, and the as-prepared NC-1000 is among the best catalysts for the ORR in an alkaline environment. Moreover, it was confirmed with DFT calculations that graphitic-N species are mainly responsible for the excellent ORR performance of NC-1000 following the associative mechanism.