MPManoj Panchal

Manoj Panchal

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Manoj Panchal has a total of 29 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Application of industrial wastes material as energy storage: a comprehensive review

    by Upendra Rajak, K. Sudha Madhuri, Manoj Panchal, Chaithanya Kalangi

    Using industrial solid waste to generate energy is a viable approach that is attracting increasing attention as a business opportunity for environmentally friendly and cost-effective energy production. The research examines materials such as fly ash (FA), red mud (RM), steel slag (SS), calcium aluminate cement (CAC), and white cement (WC), focusing on their composition and synthesis, thermal storage properties — including thermal conductivity, specific heat capacity, and structural permanence under frequent thermal loading — and applicability in packed-bed and composite thermal energy storage (TES) structures. Thermal conductivities calculated at temperature as high 500 °C were verified by CAC composites that are stable at high temperatures, representing their appropriateness for high temperature applications. Whereas FA and RM were only moderately thermally conductive, SS demonstrated superior thermal performance. Although the WC looks better and has a smother surface, its heat resistance is disappeared. The review goes beyond what is usually known in the investigations. Through an energy-focused method, we determine that the materials can substitute energy rather than being treated as mere by-products. This types it thinkable to create goods that are good for the environment. This creates new opportunities for environmentally friendly design. For investigators and engineers looking to build bridges; in this work offers a new and important path.

  • A comparison of the effect of nano clay addition on microstructures and mechanical properties of epoxy and polyester reinforced glass/sisal hybrid polymer composites

    by Mallampati Somaiah Chowdary, Gujjala Raghavendra, M. S. R. Niranjan Kumar, Shakuntala Ojha, Pasala Mohan Kiran, Manoj Panchal

    In the present study, a comparison has been made between the mechanical properties of polyester and epoxy matrices reinforced Sisal/S‐Glass, and also the effects of nano clay addition have been studied. For fabrication of composites, Glass/Sisal fibers are reinforced with Polyester and Epoxy with various wt% of nano clay. These composites are fabricated through the hand lay‐up technique. Various wt% of nano clay are 2, 4, 6 wt%, and the stacking sequence of fibers are GSSG (S‐Glass/Sisal/Sisal/S‐Glass). The variations of strengths among the polyester/epoxy are also studied and examined. In Epoxy/GSSG reinforced NC composites compared with 0–4 wt% tensile strength increased by 18%. Polyester/GSSG reinforced NC composites tensile strength increased by 16%, and in Epoxy/GSSG reinforced NC composites compared with 0–2 wt% flexural strength increased by 16%. Polyester/GSSG reinforced NC composites tensile strength increased by 24%. The microstructural analysis has been carried out on the fractured samples, which indicated brittle failure of the fiber and fiber pull‐outs. This conclusion confirms the proposed novel laminates fitness for possible usage in structural applications in the aerospace sector.


  • Effect of biomass‐biochar content on the erosion wear performance of biochar epoxy composites

    by Om Prakash Minugu, Manoj Panchal, Raghavendra Gujjala, Shakuntala Ojha, Aneta Krzyzak, Dheeraj Kumar

    Biomass waste processing with a potential to commercialization is always concern for achieving sustainable ecosystem. In the current work, biochar was extracted from the arhar stalks (AS) and bael shells (BS) biowaste which has carbon as major constituent. As a result, biochar in particle form has excellent mechanical and tribological properties and hence when combined with epoxy forms a composite with enhanced tribological properties. In this context, the biochar epoxy composites were prepared with three different compositions of 2, 4, and 6% wt, and characterized for adsorption and solid erosion wear studies. The adsorption studies conferred that BS biochar materials consist large Brunauer–Emmet–Teller surface area, that is, 294.3393 m2/g and pore volume of 0.13166 cm3/g comparative to AS biochar materials. It was observed from the results that BS based biochar epoxy composites displayed excellent enhancement in erosion wear resistance of about 52% comparative to pure epoxy that of AS at 2%. Alongside further increment in the composition of the biochar constituent to 4% exhibited semi ductile behavior with a peak wear rate at 45° impact angle. Applications pertaining to the realized composites in the current work is expected to meet the aerospace and automotive industries in specific.


  • Study of environmental behavior and its effect on solid particle erosion behavior of hierarchical porous activated carbon‐epoxy composite

    by Manoj Panchal, Om Prakash Minugu, Raghavendra Gujjala, Shakuntala Ojha, Somaiah Mallampati Chowdary, Alamgir Mohammad

    Porous carbon materials have versatile physical and chemical characteristics; however, these materials are not be fully exploited as reinforcements in polymer composites. The present investigation focuses on extraction of hierarchical porous carbon and its utilization in polymer composite in order to enhance the erosion wear resistance and hardness of polymer composite. The current research work also demonstrates the wear behavior of the hierarchical porous carbon epoxy composite when exposed to different environmental conditions. The attributes of hierarchical carbon have verified through different characterization techniques, further porous carbon with optimum properties has been included as reinforcement in different ratios viz. 1, 2 and 3 wt. % to make the epoxy composites. The composites were studied for their hardness, moisture absorption and erosion wear behavior at variable impingement angles (30°, 45°, 60°, and 90°) and impingement velocities (101, 119, and 148 m/s). Moisture uptake results suggests that the increase in filler percentage increased the moisture absorption, and the highest moisture absorption was reported in composite immersed in saline water environment. It was observed that addition of activated carbon particles has enhanced hardness and wear resistance of the composite. Composite with 2 wt.% particulate reinforcement was found to be the optimum percentage of reinforcement which was subjected to 82.4% less material loss that is, erosion rate at 45° impact angle compared to neat polymer. From the erosion wear results it was further noticed that moisture absorption has deteriorated the erosion wear resistance of composites resulting in high material loss.


  • Effect of biomass derived biochar materials on mechanical properties of biochar epoxy composites

    by Om Prakash Minugu, Raghavendra Gujjala, Ojha Shakuntala, Panchal Manoj, M Somaiah Chowdary

    In the current research work an attempt is made to utilize the ecofriendly biochar materials as reinforcements in polymer composites. Biochar materials were developed from Arhar stalks and Bael shells waste biomass by pyrolysis process and studied for different characteristics. The surface morphology, crystalline structure, fixed carbon content and elemental composition of synthesized biochar materials were studied using scanning electron microscope, x-ray diffraction and proximate analysis. The results showed that the biochar (BB) produced using Bael shells are highly amorphous in nature and have high amount of elemental carbon than arhar stalk biochar (AB). Using epoxy as matrix and biochar materials as reinforcement composites were fabricated with three different filler weight fractions i.e., 2%, 4% and 6%. The composites with 4% Bael shell biochar exhibited high tensile strength, and has 183% more strength when compared with neat epoxy. Increasing the filler percentage from 4% to 6% the strength and hardness of composites reduced due to poor interfacial bonding. Morphological studies were performed on fractured surfaces of tensile tested samples by using scanning electron microscope. From thermogravimetric analysis it was found that with the inclusion of biochar materials thermal stability of composites was significantly enhanced. 4% Bael biochar composites (BBC) exhibited higher thermal resistance which left 8% residual mass.


  • Experimental investigation of mechanical and erosion behavior of eggshell nanoparticulate epoxy biocomposite

    by Manoj Panchal, G Raghavendra, A Rahul Reddy, M Omprakash, S Ojha

    In the present work, the mechanical and the tribological properties of eggshell nanoparticulate epoxy biocomposite were studied. The nanoparticles of eggshell were synthesized by planetary ball milling technique. Synthesized eggshell nanoparticulate were characterized with the aid of Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), X-ray diffraction analysis, and Fourier Transform Infrared (FTIR) Spectroscopy. Fabrication of eggshell nanoparticulate epoxy biocomposite was done by hand lay-up technique with different weight percentages (1 wt%, 2 wt%, 3 wt%, 4 wt%) of eggshell nanoparticles. To examine the solid particle erosion behavior of eggshell nanoparticulate epoxy biocomposite, four different impact angles (30°, 45°, 60°, 90°) and three different velocities (101 m s−1, 119 m s−1, 148 m s−1) were chosen. The effect of eggshell nanoparticles incorporation on the tensile properties, hardness, and the flexural properties was also investigated. The fractured surfaces of the tensile test, flexural test, and erosion test samples were examined with a SEM for morphological analysis. It was found that the eggshell nanoparticulate addition has a fruitful effect on tensile and flexural strength. The maximum tensile strength was found for 2 wt% nanoparticles addition, while the maximum flexural strength was found for 3 wt% of nanoparticles addition. The sand erosion study established a maximum wear rate at 60° of impact angle. The maximum erosion resistance was found in 2 wt% of eggshell nanoparticulate concentration.


  • Mechanical characterization of arhar biomass based porous nano activated carbon polymer composites

    by Minugu Om Prakash, Raghavendra Gujjala, Manoj Panchal, Shakuntala Ojha

    Activated carbon material was synthesized by two stage pyrolysis and chemical activation method using arhar fiber biomass as precursor. The effect of activation temperature on the characteristics of activated carbon materials was explored. Temperatures of 700°C, 800°C, and 900°C were used for the production of activated carbon materials. BET surface area, pore size, and pore volume were studied using N2 adsorption analysis. Activated carbon prepared at 800°C temperature was found to be effective; exhibited 504.6 m2/g surface area and pore volume of 0.245569 cm3/g with micropores of less than 20 Å diameter. XRD analysis of the material exhibited broad and sharp peaks in the range of 18 to 30 (2θ), confirming amorphous structure. From thermogravimetric analysis, it was noticed that activated carbon has high thermal stability. It was left with 62% of residual mass when subjected to 1400°C temperature. Activated carbon material synthesized at 800°C was used as filler while epoxy functioned as matrix material for fabrication of composites. The effect of filler loading on the tensile strength of composites was studied. Tensile strength of composite material increased with addition of filler loading. It was observed that composite with 2% filler loading had a maximum tensile strength of 56 MPa.


  • Effect of bi-directional and multi-directional fibers on the mechanical properties of glass fiber-epoxy composites

    by G Raghavendra, P Pratap Naidu, Shakuntala Ojha, Boggarapu Vasavi, Manoj Panchal, Samir Kumar Acharya