Eduardo Nobre Lages
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Eduardo Nobre Lages has a total of 61 co-authors. Here are the top co-authors by number of shared publications:
- Márcio André Araújo Cavalcante
Campus of Engineering and Agricultural Sciences, Federal University of Alagoas
7 shared publications - Aline da Silva Ramos Barboza
Universidade Federal de Alagoas, Brasil
4 shared publications - Marcelo Vitor Oliveira Araujo
Federal University of Alagoas
4 shared publications - Severino Pereira Cavalcanti Marques
Universidade Federal de Alagoas
4 shared publications - Eduardo Setton Sampaio Silveira
Universidade Federal de Alagoas, Maceió, AL, Brasil
3 shared publications - Mauro Costa de Oliveira
Petrobras
3 shared publications
Latest Publications
- Open Access
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Design of mooring systems for offshore structures through an optimization approach
The design of mooring systems for offshore structures is crucial for ensuring the safe and efficient operation of floating production systems (FPS) within the oil and gas industry. This activity is renowned for its demanding resource requirements, in terms of technical challenges, design criteria, computational cost and extensive hours of work from highly skilled professionals. In this context, structural optimization emerges as a potential solution to mitigate the use of some of these resources, introducing a design approach reliant on optimization algorithms capable of translating technical criteria into mathematical functions and proposing valid and optimized solutions. However, this optimization approach presents its own set of challenges, notably the need of evaluating thousands of structural models, which directly depend on time-consuming numerical simulations. This work aims to treat the optimization challenges by proposing strategies to expedite the computation of numerical models and to support the designing professional in determining optimized designs suitable for direct industrial application.
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Open AccessDesign of mooring systems for offshore structures through an optimization approach
The design of mooring systems for offshore structures is crucial for ensuring the safe and efficient operation of floating production systems (FPS) within the oil and gas industry. This activity is renowned for its demanding resource requirements, in terms of technical challenges, design criteria, computational cost and extensive hours of work from highly skilled professionals. In this context, structural optimization emerges as a potential solution to mitigate the use of some of these resources, introducing a design approach reliant on optimization algorithms capable of translating technical criteria into mathematical functions and proposing valid and optimized solutions. However, this optimization approach presents its own set of challenges, notably the need of evaluating thousands of structural models, which directly depend on time-consuming numerical simulations. This work aims to treat the optimization challenges by proposing strategies to expedite the computation of numerical models and to support the designing professional in determining optimized designs suitable for direct industrial application.
- Open Access
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Three-dimensional finite-volume theory for elastic stress analysis in solid mechanics
The finite-volume theory is a powerful numerical technique for structural analysis in solid mechanics and has emerged as an alternative to the finite-element method. The finite-volume theory is an equilibrium-based approach that employs surface-averaged tractions and displacements acting on the faces of a subvolume. In addition, this theory employs the equilibrium equations at the subvolume level and continuity conditions between adjacent subvolumes along subvolume faces. The finite-volume theory has been successfully used for two-dimensional structural analyses. However, in the context of three-dimensional solid mechanics analysis, this numerical technique has encountered instability problems related to the interpretation between adjacent subvolumes' faces. These problems result in the singularity of the global stiffness matrix, which has delayed the publication of a three-dimensional version of the finite-volume theory for continuum elastic structures. These numerical instability problems can be solved by employing a modified stiffness matrix, where the Tikhonov regularization method is used to artificially add minimal stiffness in the main diagonal of the global stiffness matrix. This contribution proposes the stress analysis of three-dimensional continuum elastic structures by the finite-volume theory, where problems with analytical solutions are employed for verification.
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Open AccessThree-dimensional finite-volume theory for elastic stress analysis in solid mechanics
The finite-volume theory is a powerful numerical technique for structural analysis in solid mechanics and has emerged as an alternative to the finite-element method. The finite-volume theory is an equilibrium-based approach that employs surface-averaged tractions and displacements acting on the faces of a subvolume. In addition, this theory employs the equilibrium equations at the subvolume level and continuity conditions between adjacent subvolumes along subvolume faces. The finite-volume theory has been successfully used for two-dimensional structural analyses. However, in the context of three-dimensional solid mechanics analysis, this numerical technique has encountered instability problems related to the interpretation between adjacent subvolumes' faces. These problems result in the singularity of the global stiffness matrix, which has delayed the publication of a three-dimensional version of the finite-volume theory for continuum elastic structures. These numerical instability problems can be solved by employing a modified stiffness matrix, where the Tikhonov regularization method is used to artificially add minimal stiffness in the main diagonal of the global stiffness matrix. This contribution proposes the stress analysis of three-dimensional continuum elastic structures by the finite-volume theory, where problems with analytical solutions are employed for verification.
- Open Access
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Applications of topology optimization considering physical nonlinearity
Topology optimization is a powerful computational tool that assists designers in determining efficient structural configurations. In civil engineering, most applications are still limited to the field of theoretical/computational analysis. This limitation restricts the scope and applications of topology optimization concepts for practical problems. Extensive research has focused on topology optimization using isotropic material with linear elastic behavior. However, there is a paucity of studies comparing linear and nonlinear material behaviors, highlighting a research gap in result analysis and structural application fields. For concrete structures, in particular, there is generally a deeply nonlinear behavior, including effects such as cracking, creep, and shrinkage. Therefore, it becomes a challenge to realistically optimize this type of material. This study investigates the applications of topology optimization for evaluating the structural behavior of beams considering the physical nonlinearity of the material. Using the ABAQUS® software and the SIMP method, a finite element numerical analysis is conducted to determine the density distribution in a design domain. The obtained results of the optimized models are compared, and it is observed that the presence of plastic deformations influences relevant aspects of structural behavior. This study contributes to the dissemination of the use of nonlinear constitutive models, highlighting the potential of the concept of optimization-assisted design.
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Open AccessApplications of topology optimization considering physical nonlinearity
Topology optimization is a powerful computational tool that assists designers in determining efficient structural configurations. In civil engineering, most applications are still limited to the field of theoretical/computational analysis. This limitation restricts the scope and applications of topology optimization concepts for practical problems. Extensive research has focused on topology optimization using isotropic material with linear elastic behavior. However, there is a paucity of studies comparing linear and nonlinear material behaviors, highlighting a research gap in result analysis and structural application fields. For concrete structures, in particular, there is generally a deeply nonlinear behavior, including effects such as cracking, creep, and shrinkage. Therefore, it becomes a challenge to realistically optimize this type of material. This study investigates the applications of topology optimization for evaluating the structural behavior of beams considering the physical nonlinearity of the material. Using the ABAQUS® software and the SIMP method, a finite element numerical analysis is conducted to determine the density distribution in a design domain. The obtained results of the optimized models are compared, and it is observed that the presence of plastic deformations influences relevant aspects of structural behavior. This study contributes to the dissemination of the use of nonlinear constitutive models, highlighting the potential of the concept of optimization-assisted design.
- Open Access
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Cost-Optimized Mooring Systems integrating Load Reduction Device for 15 MW FOWT
The wind energy sector is shifting towards larger turbines to reduce energy costs, posing challenges for installations in shallow and intermediate waters (60-150 meters) that require smaller platforms and mooring systems. Previous research utilized a multi-objective optimization (MO) framework, employing tools like NSGA2 and OpenFast with MoorDyn, to design systems compatible with synthetic lines. Incorporating load reduction devices (LDRs) in mooring systems offers significant benefits by reducing loads on anchors and mooring lines, allowing for smaller, lighter anchors, and mitigating fatigue damage. LDRs, such as ballasted pendulums, polymer springs, and hydraulic dampers, feature unique non-linear stiffness curves crucial for performance. This study advances the MO framework by assessing a mooring system with spring polymer LDRs and conducting a sensitivity analysis of key design variables using the design of experiments (DOE) approach. It integrates the Pymoo optimization library with industrial software like OrcaFlex and OrcaWave, promoting broader industry adoption. The findings indicate significant reductions in mooring system costs, particularly for smaller mooring radii, and a 22% decrease in computational costs with fewer design variables, enhancing the mooring design process for any floating platform in any water depth.
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Open AccessCost-Optimized Mooring Systems integrating Load Reduction Device for 15 MW FOWT
The wind energy sector is shifting towards larger turbines to reduce energy costs, posing challenges for installations in shallow and intermediate waters (60-150 meters) that require smaller platforms and mooring systems. Previous research utilized a multi-objective optimization (MO) framework, employing tools like NSGA2 and OpenFast with MoorDyn, to design systems compatible with synthetic lines. Incorporating load reduction devices (LDRs) in mooring systems offers significant benefits by reducing loads on anchors and mooring lines, allowing for smaller, lighter anchors, and mitigating fatigue damage. LDRs, such as ballasted pendulums, polymer springs, and hydraulic dampers, feature unique non-linear stiffness curves crucial for performance. This study advances the MO framework by assessing a mooring system with spring polymer LDRs and conducting a sensitivity analysis of key design variables using the design of experiments (DOE) approach. It integrates the Pymoo optimization library with industrial software like OrcaFlex and OrcaWave, promoting broader industry adoption. The findings indicate significant reductions in mooring system costs, particularly for smaller mooring radii, and a 22% decrease in computational costs with fewer design variables, enhancing the mooring design process for any floating platform in any water depth.
- Open Access
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Analysis in Mooring Chain Links Tensioned on Curved Surface
The development of offshore energy resources, specifically oil and gas, is increasing. Consequently, there is an increasing demand for state-of-the-art technologies and concepts to enhance productivity in this sector. One critical component of deep and ultra-deep water floating platforms is the mooring system, which requires rigorous design considerations. The motivation behind this lies in the substantial repair costs associated with unexpected failures. Structural failure in anchor chain links is primarily attributed to fatigue damage. While extensive studies have explored this phenomenon, the impact of mooring equipment with curved surfaces – responsible for guiding or restricting the upper end of mooring lines – on chain link behavior remains somewhat overlooked. In this study, we investigate the effects of ungrooved curved surfaces on the fatigue life of tensioned offshore mooring chain links. Using Finite Element Analysis (FEA), we analyze the behavior of mooring chain links when subjected to tension on curved surfaces. Our findings identify stress hotspots and calculate the corresponding Stress Concentration Factors (SCFs). Notably, the presence of curved surfaces significantly influences stress distribution and fatigue life. Additionally, we explore the effects of varying nominal stress levels applied during assembly and changes in the radius of the curved surface. These results have important implications for the design of mooring systems used in oil and gas exploration and production.
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Open AccessAnalysis in Mooring Chain Links Tensioned on Curved Surface
The development of offshore energy resources, specifically oil and gas, is increasing. Consequently, there is an increasing demand for state-of-the-art technologies and concepts to enhance productivity in this sector. One critical component of deep and ultra-deep water floating platforms is the mooring system, which requires rigorous design considerations. The motivation behind this lies in the substantial repair costs associated with unexpected failures. Structural failure in anchor chain links is primarily attributed to fatigue damage. While extensive studies have explored this phenomenon, the impact of mooring equipment with curved surfaces – responsible for guiding or restricting the upper end of mooring lines – on chain link behavior remains somewhat overlooked. In this study, we investigate the effects of ungrooved curved surfaces on the fatigue life of tensioned offshore mooring chain links. Using Finite Element Analysis (FEA), we analyze the behavior of mooring chain links when subjected to tension on curved surfaces. Our findings identify stress hotspots and calculate the corresponding Stress Concentration Factors (SCFs). Notably, the presence of curved surfaces significantly influences stress distribution and fatigue life. Additionally, we explore the effects of varying nominal stress levels applied during assembly and changes in the radius of the curved surface. These results have important implications for the design of mooring systems used in oil and gas exploration and production.
- Open Access
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Effect of proof loading on the fatigue life of mooring lines
The oil and gas production sector has experienced substantial expansion in recent decades, playing a crucial role in the global economy. To enhance productive efficiency, several extraction operations are carried out on offshore floating platforms over deep waters, which require advanced mooring system technologies to maintain their positional stability. These systems are exposed to cyclic loads throughout their operation and must be properly designed to withstand fatigue. However, recent incidents of premature failures in mooring lines have revealed a new type of fatigue failure in mooring chain links, induced by mechanisms entitled Out-of-Plane Bending (OPB) and In-Plane Bending (IPB), characterized by fatigue phenomena due to moments out of the plane of the link and in the plane of the link. The origin of these bending mechanisms is related to the manufacturing process of the moorings, during which proof loads of approximately 65% to 80% of the Minimum Breaking Load (MBL) are applied, as recommended by technical standards to extend the mooring’s lifetime. This process, however, causes plastic deformations that restrict sliding movement between adjacent links, resulting, along with friction, in significant bending stresses in the links. In this context, various studies have shown that parameters such as operational tension, link diameter, friction coefficient, and the level of proof loading significantly influence the incidence of fatigue damage in mooring lines. Therefore, the present study proposes to conduct a parametric analysis through finite element simulations, focusing on the variation of the proof loading level to assess its effects on parameters directly related to fatigue calculation and, consequently, the lifetime of mooring lines, such as stress concentration factors, OPB angle variation, OPB moment, among others.
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Open AccessEffect of proof loading on the fatigue life of mooring lines
The oil and gas production sector has experienced substantial expansion in recent decades, playing a crucial role in the global economy. To enhance productive efficiency, several extraction operations are carried out on offshore floating platforms over deep waters, which require advanced mooring system technologies to maintain their positional stability. These systems are exposed to cyclic loads throughout their operation and must be properly designed to withstand fatigue. However, recent incidents of premature failures in mooring lines have revealed a new type of fatigue failure in mooring chain links, induced by mechanisms entitled Out-of-Plane Bending (OPB) and In-Plane Bending (IPB), characterized by fatigue phenomena due to moments out of the plane of the link and in the plane of the link. The origin of these bending mechanisms is related to the manufacturing process of the moorings, during which proof loads of approximately 65% to 80% of the Minimum Breaking Load (MBL) are applied, as recommended by technical standards to extend the mooring’s lifetime. This process, however, causes plastic deformations that restrict sliding movement between adjacent links, resulting, along with friction, in significant bending stresses in the links. In this context, various studies have shown that parameters such as operational tension, link diameter, friction coefficient, and the level of proof loading significantly influence the incidence of fatigue damage in mooring lines. Therefore, the present study proposes to conduct a parametric analysis through finite element simulations, focusing on the variation of the proof loading level to assess its effects on parameters directly related to fatigue calculation and, consequently, the lifetime of mooring lines, such as stress concentration factors, OPB angle variation, OPB moment, among others.
- Open Access
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Computational Modeling for Evaluation of Plane Frames in Seismic Zones
Seismic events, also known as earthquakes, induce dynamic effects on structures due to the abrupt movement of the ground, potentially leading these structures to collapse. These earthquakes are often associated with the movement of tectonic plates and primarily occur in regions near the edges of these plates, where interactions are more intense. However, there exists a specific category of earthquakes called ‘induced seismic events’, which are triggered by human activities such as mining, natural resource extraction, and fluid injection into the ground. There has been an increase in the occurrence of these earthquakes in some countries, raising concerns among authorities, especially in urban areas. In this context, our work aims to present a computer program for the dynamic analysis of plane frames, focusing on the structural behavior of such frames under the influence of seismic events. We consider seismic actions as stipulated in the Brazilian standard NBR 15421/23, as well as real induced earthquakes. The results obtained are essential for understanding the behavior of the analyzed structures and are necessary to ensure proper structural design, providing greater safety when these structures are subjected to this type of action.
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Open AccessComputational Modeling for Evaluation of Plane Frames in Seismic Zones
Seismic events, also known as earthquakes, induce dynamic effects on structures due to the abrupt movement of the ground, potentially leading these structures to collapse. These earthquakes are often associated with the movement of tectonic plates and primarily occur in regions near the edges of these plates, where interactions are more intense. However, there exists a specific category of earthquakes called ‘induced seismic events’, which are triggered by human activities such as mining, natural resource extraction, and fluid injection into the ground. There has been an increase in the occurrence of these earthquakes in some countries, raising concerns among authorities, especially in urban areas. In this context, our work aims to present a computer program for the dynamic analysis of plane frames, focusing on the structural behavior of such frames under the influence of seismic events. We consider seismic actions as stipulated in the Brazilian standard NBR 15421/23, as well as real induced earthquakes. The results obtained are essential for understanding the behavior of the analyzed structures and are necessary to ensure proper structural design, providing greater safety when these structures are subjected to this type of action.
- Open Access
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Comparison of Soil Modeling Strategies with Springs in Free-Span Submarine Pipelines
The fatigue life of submarine pipelines is significantly influenced by structural parameters and environmental conditions to which they are exposed. Numerous studies have focused on modeling this issue using the Finite Element Method to determine frequencies and natural modes of vibration. The models consist of pipeline sections, with some segments in free spans and others supported by soils that can be represented by contact surfaces or sets of springs constituting an elastic foundation. This work aims to evaluate different strategies for representing soil stiffness using springs in a finite element model. Additionally, we investigate the incorporation of the solution for a semi-infinite beam on an elastic foundation to calculate the stiffness of the modeled endpoints. We analyze different element lengths in a free-spanning pipeline model to quantify the influence of various approaches on frequencies and natural modes of vibration. Therefore, this work emphasizes the relevance of parametric studies in modeling submarine pipelines, with particular emphasis on accounting for soil stiffness.
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Open AccessComparison of Soil Modeling Strategies with Springs in Free-Span Submarine Pipelines
The fatigue life of submarine pipelines is significantly influenced by structural parameters and environmental conditions to which they are exposed. Numerous studies have focused on modeling this issue using the Finite Element Method to determine frequencies and natural modes of vibration. The models consist of pipeline sections, with some segments in free spans and others supported by soils that can be represented by contact surfaces or sets of springs constituting an elastic foundation. This work aims to evaluate different strategies for representing soil stiffness using springs in a finite element model. Additionally, we investigate the incorporation of the solution for a semi-infinite beam on an elastic foundation to calculate the stiffness of the modeled endpoints. We analyze different element lengths in a free-spanning pipeline model to quantify the influence of various approaches on frequencies and natural modes of vibration. Therefore, this work emphasizes the relevance of parametric studies in modeling submarine pipelines, with particular emphasis on accounting for soil stiffness.
- Open Access
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
A micromechanical approach for homogenization of elastic multiphase periodic composites
This work presents a micromechanical model for the linear elastic homogenization of composites with periodic microstructures. The model is constructed for composites with an arbitrary number of phases and geometric shapes of the inclusions, differently from the most homogenization approaches available in the literature. In addition, no restriction is made with respect to the mismatch between the properties of the constituent phases and volume fractions of the inclusions. The model formulation is based on the Eshelby equivalent inclusion method and corresponds to an extension of a procedure originally derived to evaluate the effective elastic moduli of periodic composites with only two constituent phases. The fluctuating elastic fields within of the repeating unit cell (RUC) are represented by Fourier series, resulting in Lippmann-Schwinger integral equations involving the unknown eigenstrain fields of the inclusions. These integral equations are solved by using a straightforward approach that employs a scheme of partition of the domain of each inclusion. Applications to composites with different arrays of coated fibers and constituent materials are presented to show the efficiency of the model.
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Open AccessA micromechanical approach for homogenization of elastic multiphase periodic composites
This work presents a micromechanical model for the linear elastic homogenization of composites with periodic microstructures. The model is constructed for composites with an arbitrary number of phases and geometric shapes of the inclusions, differently from the most homogenization approaches available in the literature. In addition, no restriction is made with respect to the mismatch between the properties of the constituent phases and volume fractions of the inclusions. The model formulation is based on the Eshelby equivalent inclusion method and corresponds to an extension of a procedure originally derived to evaluate the effective elastic moduli of periodic composites with only two constituent phases. The fluctuating elastic fields within of the repeating unit cell (RUC) are represented by Fourier series, resulting in Lippmann-Schwinger integral equations involving the unknown eigenstrain fields of the inclusions. These integral equations are solved by using a straightforward approach that employs a scheme of partition of the domain of each inclusion. Applications to composites with different arrays of coated fibers and constituent materials are presented to show the efficiency of the model.