Mauro Costa de Oliveira
Research Subjects
Mauro Costa de Oliveira has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Eduardo Nobre Lages
Universidade Federal de Alagoas
3 shared publications - Evilly Raquel Henrique da Silveira
UFAL
2 shared publications - Fábio José Coutinho da Silva Filho
UFAL
2 shared publications - Luis Volnei Sudati Sagrilo
Laboratory of Analysis and Reliability of Offshore Structures, Civil Engineering Program (PEC), Alberto Luiz Coimbra Institute for Graduate Studies and Research in Engineering, Federal University of Rio de Janeiro, Rio de Janeiro 21941-598, Brazil
2 shared publications - Marina Leivas Simão
Federal University of Rio de Janeiro, Rio de Janeiro, Brazil
2 shared publications - Michele Agra de Lemos Martins
UFAL - Universidade Federal de Alagoas
2 shared publications
Latest Publications
- Open Access
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Design of mooring systems for offshore structures through an optimization approach
The design of mooring systems for offshore structures is crucial for ensuring the safe and efficient operation of floating production systems (FPS) within the oil and gas industry. This activity is renowned for its demanding resource requirements, in terms of technical challenges, design criteria, computational cost and extensive hours of work from highly skilled professionals. In this context, structural optimization emerges as a potential solution to mitigate the use of some of these resources, introducing a design approach reliant on optimization algorithms capable of translating technical criteria into mathematical functions and proposing valid and optimized solutions. However, this optimization approach presents its own set of challenges, notably the need of evaluating thousands of structural models, which directly depend on time-consuming numerical simulations. This work aims to treat the optimization challenges by proposing strategies to expedite the computation of numerical models and to support the designing professional in determining optimized designs suitable for direct industrial application.
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Open AccessDesign of mooring systems for offshore structures through an optimization approach
The design of mooring systems for offshore structures is crucial for ensuring the safe and efficient operation of floating production systems (FPS) within the oil and gas industry. This activity is renowned for its demanding resource requirements, in terms of technical challenges, design criteria, computational cost and extensive hours of work from highly skilled professionals. In this context, structural optimization emerges as a potential solution to mitigate the use of some of these resources, introducing a design approach reliant on optimization algorithms capable of translating technical criteria into mathematical functions and proposing valid and optimized solutions. However, this optimization approach presents its own set of challenges, notably the need of evaluating thousands of structural models, which directly depend on time-consuming numerical simulations. This work aims to treat the optimization challenges by proposing strategies to expedite the computation of numerical models and to support the designing professional in determining optimized designs suitable for direct industrial application.
- Open Access
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Analysis in Mooring Chain Links Tensioned on Curved Surface
The development of offshore energy resources, specifically oil and gas, is increasing. Consequently, there is an increasing demand for state-of-the-art technologies and concepts to enhance productivity in this sector. One critical component of deep and ultra-deep water floating platforms is the mooring system, which requires rigorous design considerations. The motivation behind this lies in the substantial repair costs associated with unexpected failures. Structural failure in anchor chain links is primarily attributed to fatigue damage. While extensive studies have explored this phenomenon, the impact of mooring equipment with curved surfaces – responsible for guiding or restricting the upper end of mooring lines – on chain link behavior remains somewhat overlooked. In this study, we investigate the effects of ungrooved curved surfaces on the fatigue life of tensioned offshore mooring chain links. Using Finite Element Analysis (FEA), we analyze the behavior of mooring chain links when subjected to tension on curved surfaces. Our findings identify stress hotspots and calculate the corresponding Stress Concentration Factors (SCFs). Notably, the presence of curved surfaces significantly influences stress distribution and fatigue life. Additionally, we explore the effects of varying nominal stress levels applied during assembly and changes in the radius of the curved surface. These results have important implications for the design of mooring systems used in oil and gas exploration and production.
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Open AccessAnalysis in Mooring Chain Links Tensioned on Curved Surface
The development of offshore energy resources, specifically oil and gas, is increasing. Consequently, there is an increasing demand for state-of-the-art technologies and concepts to enhance productivity in this sector. One critical component of deep and ultra-deep water floating platforms is the mooring system, which requires rigorous design considerations. The motivation behind this lies in the substantial repair costs associated with unexpected failures. Structural failure in anchor chain links is primarily attributed to fatigue damage. While extensive studies have explored this phenomenon, the impact of mooring equipment with curved surfaces – responsible for guiding or restricting the upper end of mooring lines – on chain link behavior remains somewhat overlooked. In this study, we investigate the effects of ungrooved curved surfaces on the fatigue life of tensioned offshore mooring chain links. Using Finite Element Analysis (FEA), we analyze the behavior of mooring chain links when subjected to tension on curved surfaces. Our findings identify stress hotspots and calculate the corresponding Stress Concentration Factors (SCFs). Notably, the presence of curved surfaces significantly influences stress distribution and fatigue life. Additionally, we explore the effects of varying nominal stress levels applied during assembly and changes in the radius of the curved surface. These results have important implications for the design of mooring systems used in oil and gas exploration and production.
- Open Access
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Effect of proof loading on the fatigue life of mooring lines
The oil and gas production sector has experienced substantial expansion in recent decades, playing a crucial role in the global economy. To enhance productive efficiency, several extraction operations are carried out on offshore floating platforms over deep waters, which require advanced mooring system technologies to maintain their positional stability. These systems are exposed to cyclic loads throughout their operation and must be properly designed to withstand fatigue. However, recent incidents of premature failures in mooring lines have revealed a new type of fatigue failure in mooring chain links, induced by mechanisms entitled Out-of-Plane Bending (OPB) and In-Plane Bending (IPB), characterized by fatigue phenomena due to moments out of the plane of the link and in the plane of the link. The origin of these bending mechanisms is related to the manufacturing process of the moorings, during which proof loads of approximately 65% to 80% of the Minimum Breaking Load (MBL) are applied, as recommended by technical standards to extend the mooring’s lifetime. This process, however, causes plastic deformations that restrict sliding movement between adjacent links, resulting, along with friction, in significant bending stresses in the links. In this context, various studies have shown that parameters such as operational tension, link diameter, friction coefficient, and the level of proof loading significantly influence the incidence of fatigue damage in mooring lines. Therefore, the present study proposes to conduct a parametric analysis through finite element simulations, focusing on the variation of the proof loading level to assess its effects on parameters directly related to fatigue calculation and, consequently, the lifetime of mooring lines, such as stress concentration factors, OPB angle variation, OPB moment, among others.
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Open AccessEffect of proof loading on the fatigue life of mooring lines
The oil and gas production sector has experienced substantial expansion in recent decades, playing a crucial role in the global economy. To enhance productive efficiency, several extraction operations are carried out on offshore floating platforms over deep waters, which require advanced mooring system technologies to maintain their positional stability. These systems are exposed to cyclic loads throughout their operation and must be properly designed to withstand fatigue. However, recent incidents of premature failures in mooring lines have revealed a new type of fatigue failure in mooring chain links, induced by mechanisms entitled Out-of-Plane Bending (OPB) and In-Plane Bending (IPB), characterized by fatigue phenomena due to moments out of the plane of the link and in the plane of the link. The origin of these bending mechanisms is related to the manufacturing process of the moorings, during which proof loads of approximately 65% to 80% of the Minimum Breaking Load (MBL) are applied, as recommended by technical standards to extend the mooring’s lifetime. This process, however, causes plastic deformations that restrict sliding movement between adjacent links, resulting, along with friction, in significant bending stresses in the links. In this context, various studies have shown that parameters such as operational tension, link diameter, friction coefficient, and the level of proof loading significantly influence the incidence of fatigue damage in mooring lines. Therefore, the present study proposes to conduct a parametric analysis through finite element simulations, focusing on the variation of the proof loading level to assess its effects on parameters directly related to fatigue calculation and, consequently, the lifetime of mooring lines, such as stress concentration factors, OPB angle variation, OPB moment, among others.
- Open Access
- 16 July 2021
- Published by ASME International
An Efficient Importance Sampling Method for the Long-Term Mooring Lines Response Estimation Considering Wind Sea and Swell
Escalating demand in the oil and gas industry has led offshore structures to be installed in ever deeper waters and under severe environmental conditions. As the mooring system is a crucial element in floating offshore structures, a reliable estimation of its long-term response is a decisive step in any usual design procedure. In the long-term scenario, the environmental actions to
- 16 July 2021
- Published by ASME International
Open AccessAn Efficient Importance Sampling Method for the Long-Term Mooring Lines Response Estimation Considering Wind Sea and Swell
Escalating demand in the oil and gas industry has led offshore structures to be installed in ever deeper waters and under severe environmental conditions. As the mooring system is a crucial element in floating offshore structures, a reliable estimation of its long-term response is a decisive step in any usual design procedure. In the long-term scenario, the environmental actions to
- 3 August 2020
- Published by ASME International in Journal of Offshore Mechanics and Arctic Engineering
- Vol. 143 (1) , 1-32
Comparative Study of Extreme Value Estimation Approaches for Mooring Lines Top Tension Responses
It is known that the mooring system response of floating production units subjected to environmental loads is nonlinear. Even though wave elevations can be assumed as Gaussian processes for short-term periods, corresponding line tension responses generally are not, due to second-order slow-drift floater motions and intrinsic nonlinearities of the system. In this work, short-term extreme responses are estimated based on two different approaches. In the first one, a number of probability distributions are fitted to the tension time histories’ peaks samples and classic order statistics is applied to determine the most probable extreme line tension corresponding to a short-time period (3-h) in order to identify the one with best performance. The effect of correlation between consecutive peaks in the extremes estimation is investigated through the one-step Markov chain condition by using a Nataf transformation-based model. In the second approach, a more robust and recently developed method named average conditional exceedance rate (ACER) is investigated, where dependencies between maxima can be easily taken into account. Additionally, effects of major parameters in dynamic analyses, such as simulation length and discretization level of the wave spectrum, are evaluated. All time-series-based extreme estimates are compared with the estimates directly obtained from a sample of epochal maxima (Gumbel method). Numerical examples cover two study cases for mooring lines belonging to Floating Production Storage and Offloading (FPSO) units installed offshore Brazil. It is shown that the consideration of dependence between peaks leads to lower extreme estimates and that both approaches return accurate results.
- 3 August 2020
- Published by ASME International in Journal of Offshore Mechanics and Arctic Engineering
- Vol. 143 (1) , 1-32
Comparative Study of Extreme Value Estimation Approaches for Mooring Lines Top Tension Responses
It is known that the mooring system response of floating production units subjected to environmental loads is nonlinear. Even though wave elevations can be assumed as Gaussian processes for short-term periods, corresponding line tension responses generally are not, due to second-order slow-drift floater motions and intrinsic nonlinearities of the system. In this work, short-term extreme responses are estimated based on two different approaches. In the first one, a number of probability distributions are fitted to the tension time histories’ peaks samples and classic order statistics is applied to determine the most probable extreme line tension corresponding to a short-time period (3-h) in order to identify the one with best performance. The effect of correlation between consecutive peaks in the extremes estimation is investigated through the one-step Markov chain condition by using a Nataf transformation-based model. In the second approach, a more robust and recently developed method named average conditional exceedance rate (ACER) is investigated, where dependencies between maxima can be easily taken into account. Additionally, effects of major parameters in dynamic analyses, such as simulation length and discretization level of the wave spectrum, are evaluated. All time-series-based extreme estimates are compared with the estimates directly obtained from a sample of epochal maxima (Gumbel method). Numerical examples cover two study cases for mooring lines belonging to Floating Production Storage and Offloading (FPSO) units installed offshore Brazil. It is shown that the consideration of dependence between peaks leads to lower extreme estimates and that both approaches return accurate results.
- 1 October 2019
- Published by Elsevier in Ocean Engineering
- Vol. 189
Empirical and experimental roll damping estimates for an oil tanker in the context of the 2nd generation intact stability criteria
- 1 October 2019
- Published by Elsevier in Ocean Engineering
- Vol. 189
Empirical and experimental roll damping estimates for an oil tanker in the context of the 2nd generation intact stability criteria