Carlos A. Galeano-Rios
Carlos A. Galeano-Rios has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Paul A. Milewski
The Pennsylvania State University
5 shared publications - Daniel M. Harris
Brown University
4 shared publications - Elvis A. Agüero
Brown University
3 shared publications - Chase T. Gabbard
Brown University
2 shared publications Daniel M. Harris
School of Engineering Brown University 02912 Providence RI USA
2 shared publicationsJ.-M. Vanden-Broeck
Department of Mathematics, University College London, London WC1E 6BT, UK
2 shared publications
Latest Publications
- Open Access
- 10 March 2026
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1031, A6
Droplet rebounds off a fluid bath at low Weber numbers
We present a method to simulate non-coalescing impacts and rebounds of droplets onto the free surface of a liquid bath, together with new experimental data, focused on the low-speed impact of droplets. The method is derived from first principles and imposes only natural geometric and kinematic constraints on the motion of the impacting interfaces, yielding predictions for the evolution of the contact area, pressure distribution and wave field generated on both impacting masses. This work generalises an existing kinematic-match method whose prior applications dealt with deformation of the surface of the bath only; i.e. neglecting that of the droplet. The method’s extension to include droplet deformation gives predictions that compare favourably with existing experimental results and our new experiments conducted in the low-Weber-number regime.
- 10 March 2026
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1031, A6
Open AccessDroplet rebounds off a fluid bath at low Weber numbers
We present a method to simulate non-coalescing impacts and rebounds of droplets onto the free surface of a liquid bath, together with new experimental data, focused on the low-speed impact of droplets. The method is derived from first principles and imposes only natural geometric and kinematic constraints on the motion of the impacting interfaces, yielding predictions for the evolution of the contact area, pressure distribution and wave field generated on both impacting masses. This work generalises an existing kinematic-match method whose prior applications dealt with deformation of the surface of the bath only; i.e. neglecting that of the droplet. The method’s extension to include droplet deformation gives predictions that compare favourably with existing experimental results and our new experiments conducted in the low-Weber-number regime.
- Open Access
- 18 September 2025
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1019
Drop rebound at low Weber number
We study the rebound of drops impacting non-wetting substrates at low Weber number ( $\textit{We}$ ) through experiment, direct numerical simulation and reduced-order modelling. Submillimetre-sized drops are normally impacted onto glass slides coated with a thin viscous film that allows them to rebound without contact line formation. Experiments are performed with various drop viscosities, sizes and impact velocities, and we directly measure metrics pertinent to spreading, retraction and rebound using high-speed imaging. We complement experiments with direct numerical simulation and a fully predictive reduced-order model that applies natural geometric and kinematic constraints to simulate the drop shape and dynamics using a spectral method. At low $\textit{We}$ , drop rebound is characterised by a weaker dependence of the coefficient of restitution on $\textit{We}$ than in the more commonly studied high- $\textit{We}$ regime, with nearly $\textit{We}$ -independent rebound in the inertio-capillary limit, and an increasing contact time as $\textit{We}$ decreases. Drops with higher viscosity or size interact with the substrate longer, have a lower coefficient of restitution and stop bouncing sooner, in good quantitative agreement with our reduced-order model. In the inertio-capillary limit, low- $\textit{We}$ rebound has nearly symmetric spreading and retraction phases and a coefficient of restitution near unity. Increasing $\textit{We}$ or viscosity breaks this symmetry, coinciding with a drop in the coefficient of restitution and an increased dependence on $\textit{We}$ . Lastly, the maximum drop deformation and spreading are related through energy arguments, providing a comprehensive framework for drop impact and rebound at low $\textit{We}$ .- 18 September 2025
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1019
Open AccessDrop rebound at low Weber number
We study the rebound of drops impacting non-wetting substrates at low Weber number ( $\textit{We}$ ) through experiment, direct numerical simulation and reduced-order modelling. Submillimetre-sized drops are normally impacted onto glass slides coated with a thin viscous film that allows them to rebound without contact line formation. Experiments are performed with various drop viscosities, sizes and impact velocities, and we directly measure metrics pertinent to spreading, retraction and rebound using high-speed imaging. We complement experiments with direct numerical simulation and a fully predictive reduced-order model that applies natural geometric and kinematic constraints to simulate the drop shape and dynamics using a spectral method. At low $\textit{We}$ , drop rebound is characterised by a weaker dependence of the coefficient of restitution on $\textit{We}$ than in the more commonly studied high- $\textit{We}$ regime, with nearly $\textit{We}$ -independent rebound in the inertio-capillary limit, and an increasing contact time as $\textit{We}$ decreases. Drops with higher viscosity or size interact with the substrate longer, have a lower coefficient of restitution and stop bouncing sooner, in good quantitative agreement with our reduced-order model. In the inertio-capillary limit, low- $\textit{We}$ rebound has nearly symmetric spreading and retraction phases and a coefficient of restitution near unity. Increasing $\textit{We}$ or viscosity breaks this symmetry, coinciding with a drop in the coefficient of restitution and an increased dependence on $\textit{We}$ . Lastly, the maximum drop deformation and spreading are related through energy arguments, providing a comprehensive framework for drop impact and rebound at low $\textit{We}$ . - Open Access
- 5 October 2022
- Published by The Royal Society in Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences
- Vol. 478 (2266)
Impact of a rigid sphere onto an elastic membrane
We study the axisymmetric impact of a rigid sphere onto an elastic membrane theoretically and experimentally. We derive governing equations from first principles and impose natural kinematic and geometric constraints for the coupled motion of the sphere and the membrane during contact. The free-boundary problem of finding the contact surface, over which forces caused by the collision act, is solved by an iterative method. This results in a model that produces detailed predictions of the trajectory of the sphere, the deflection of the membrane, and the pressure distribution during contact. Our model predictions are validated against our direct experimental measurements. Moreover, we identify new phenomena regarding the behaviour of the coefficient of restitution for low impact velocities, the possibility of multiple contacts during a single rebound, and energy recovery on subsequent bounces. Insight obtained from this model problem in contact mechanics can inform ongoing efforts towards the development of predictive models for contact problems that arise naturally in multiple engineering applications.
- 5 October 2022
- Published by The Royal Society in Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences
- Vol. 478 (2266)
Open AccessImpact of a rigid sphere onto an elastic membrane
We study the axisymmetric impact of a rigid sphere onto an elastic membrane theoretically and experimentally. We derive governing equations from first principles and impose natural kinematic and geometric constraints for the coupled motion of the sphere and the membrane during contact. The free-boundary problem of finding the contact surface, over which forces caused by the collision act, is solved by an iterative method. This results in a model that produces detailed predictions of the trajectory of the sphere, the deflection of the membrane, and the pressure distribution during contact. Our model predictions are validated against our direct experimental measurements. Moreover, we identify new phenomena regarding the behaviour of the coefficient of restitution for low impact velocities, the possibility of multiple contacts during a single rebound, and energy recovery on subsequent bounces. Insight obtained from this model problem in contact mechanics can inform ongoing efforts towards the development of predictive models for contact problems that arise naturally in multiple engineering applications.
- Open Access
Impact of a rigid sphere onto an elastic membrane
We study the axisymmetric impact of a rigid sphere onto an elastic membrane theoretically and experimentally. We derive governing equations from first principles and impose natural kinematic and geometric constraints for the coupled motion of the sphere and the membrane during contact. The free-boundary problem of finding the contact surface, over which forces caused by the collision act, is solved by an iterative method. This results in a model that produces detailed predictions of the trajectory of the sphere, the deflection of the membrane, and the pressure distribution during contact. Our model predictions are validated against our direct experimental measurements. Moreover, we identify new phenomena regarding the behaviour of the coefficient of restitution for low impact velocities, the possibility of multiple contacts during a single rebound, and energy recovery on subsequent bounces. Insight obtained from this model problem in contact mechanics can inform ongoing efforts towards the development of predictive models for contact problems that arise naturally in multiple engineering applications.
Open AccessImpact of a rigid sphere onto an elastic membrane
We study the axisymmetric impact of a rigid sphere onto an elastic membrane theoretically and experimentally. We derive governing equations from first principles and impose natural kinematic and geometric constraints for the coupled motion of the sphere and the membrane during contact. The free-boundary problem of finding the contact surface, over which forces caused by the collision act, is solved by an iterative method. This results in a model that produces detailed predictions of the trajectory of the sphere, the deflection of the membrane, and the pressure distribution during contact. Our model predictions are validated against our direct experimental measurements. Moreover, we identify new phenomena regarding the behaviour of the coefficient of restitution for low impact velocities, the possibility of multiple contacts during a single rebound, and energy recovery on subsequent bounces. Insight obtained from this model problem in contact mechanics can inform ongoing efforts towards the development of predictive models for contact problems that arise naturally in multiple engineering applications.
- Open Access
- 9 February 2021
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 912
Capillary-scale solid rebounds: experiments, modelling and simulations
A millimetre-size superhydrophobic sphere impacting on the free surface of a quiescent bath can be propelled back into the air by capillary effects and dynamic fluid forces, whilst transferring part of its energy to the fluid. We report the findings of a thorough investigation of this phenomenon, involving different approaches. Over the range from minimum impact velocities required to produce rebounds to impact velocities that cause the sinking of the solid sphere, we focus on the dependence of the coefficient of restitution, contact time and maximum surface deflection on the different physical parameters of the problem. Experiments, simulations and asymptotic analysis reveal trends in the rebound metrics, uncover new phenomena at both ends of the Weber number spectrum, and collapse the data. Direct numerical simulations using a pseudo-solid sphere successfully reproduce experimental data whilst also providing insight into flow quantities that are challenging to determine from experiments. A model based on matching the motion of a perfectly hydrophobic impactor to a linearised fluid free surface is validated against direct numerical simulations and used in the low-Weber-number regime. The hierarchical and cross-validated models in this study allow us to explore the entirety of our target parameter space within a challenging multi-scale system.
- 9 February 2021
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 912
Open AccessCapillary-scale solid rebounds: experiments, modelling and simulations
A millimetre-size superhydrophobic sphere impacting on the free surface of a quiescent bath can be propelled back into the air by capillary effects and dynamic fluid forces, whilst transferring part of its energy to the fluid. We report the findings of a thorough investigation of this phenomenon, involving different approaches. Over the range from minimum impact velocities required to produce rebounds to impact velocities that cause the sinking of the solid sphere, we focus on the dependence of the coefficient of restitution, contact time and maximum surface deflection on the different physical parameters of the problem. Experiments, simulations and asymptotic analysis reveal trends in the rebound metrics, uncover new phenomena at both ends of the Weber number spectrum, and collapse the data. Direct numerical simulations using a pseudo-solid sphere successfully reproduce experimental data whilst also providing insight into flow quantities that are challenging to determine from experiments. A model based on matching the motion of a perfectly hydrophobic impactor to a linearised fluid free surface is validated against direct numerical simulations and used in the low-Weber-number regime. The hierarchical and cross-validated models in this study allow us to explore the entirety of our target parameter space within a challenging multi-scale system.
- 1 July 2019
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 873, 856-888
Quasi-normal free-surface impacts, capillary rebounds and application to Faraday walkers
We present a model for capillary-scale objects that bounce on a fluid bath as they also translate horizontally. The rebounding objects are hydrophobic spheres that impact the interface of a bath of incompressible fluid whose motion is described by linearised quasi-potential flow. Under a quasi-normal impact assumption, we demonstrate that the problem can be decomposed into an axisymmetric impact onto a quiescent bath surface, and the unforced evolution of the surface waves. We obtain a walking model that is free of impact parametrisation and we apply this formulation to model droplets walking on a vibrating bath. We show that this model accurately reproduces experimental reports of bouncing modes, impact phases and time-dependent wave field topography for bouncing and walking droplets. Moreover, we revisit the modelling of horizontal drag during droplet impacts to incorporate the effects of the changes in the pressed area during droplet–surface contacts. Finally, we show that this model captures the recently discovered phenomenon of superwalkers.
- 1 July 2019
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 873, 856-888
Quasi-normal free-surface impacts, capillary rebounds and application to Faraday walkers
We present a model for capillary-scale objects that bounce on a fluid bath as they also translate horizontally. The rebounding objects are hydrophobic spheres that impact the interface of a bath of incompressible fluid whose motion is described by linearised quasi-potential flow. Under a quasi-normal impact assumption, we demonstrate that the problem can be decomposed into an axisymmetric impact onto a quiescent bath surface, and the unforced evolution of the surface waves. We obtain a walking model that is free of impact parametrisation and we apply this formulation to model droplets walking on a vibrating bath. We show that this model accurately reproduces experimental reports of bouncing modes, impact phases and time-dependent wave field topography for bouncing and walking droplets. Moreover, we revisit the modelling of horizontal drag during droplet impacts to incorporate the effects of the changes in the pressed area during droplet–surface contacts. Finally, we show that this model captures the recently discovered phenomenon of superwalkers.
- 1 September 2018
- Published by AIP Publishing in Chaos: An Interdisciplinary Journal of Nonlinear Science
- Vol. 28 (9) , 096112
Ratcheting droplet pairs
Millimetric droplets may be levitated on the surface of a vibrating fluid bath. Eddi et al. [Europhys. Lett. 82, 44001 (2008)] demonstrated that when a pair of levitating drops of unequal size are placed nearby, they interact through their common wavefield in such a way as to self-propel through a ratcheting mechanism. We present the results of an integrated experimental and theoretical investigation of such ratcheting pairs. Particular attention is given to characterizing the dependence of the ratcheting behavior on the droplet sizes and vibrational acceleration. Our experiments demonstrate that the quantized inter-drop distances of a ratcheting pair depend on the vibrational acceleration, and that as this acceleration is increased progressively, the direction of the ratcheting motion may reverse up to four times. Our simulations highlight the critical role of both the vertical bouncing dynamics of the individual drops and the traveling wave fronts generated during impact on the ratcheting motion, allowing us to rationalize the majority of our experimental findings.
- 1 September 2018
- Published by AIP Publishing in Chaos: An Interdisciplinary Journal of Nonlinear Science
- Vol. 28 (9) , 096112
Ratcheting droplet pairs
Millimetric droplets may be levitated on the surface of a vibrating fluid bath. Eddi et al. [Europhys. Lett. 82, 44001 (2008)] demonstrated that when a pair of levitating drops of unequal size are placed nearby, they interact through their common wavefield in such a way as to self-propel through a ratcheting mechanism. We present the results of an integrated experimental and theoretical investigation of such ratcheting pairs. Particular attention is given to characterizing the dependence of the ratcheting behavior on the droplet sizes and vibrational acceleration. Our experiments demonstrate that the quantized inter-drop distances of a ratcheting pair depend on the vibrational acceleration, and that as this acceleration is increased progressively, the direction of the ratcheting motion may reverse up to four times. Our simulations highlight the critical role of both the vertical bouncing dynamics of the individual drops and the traveling wave fronts generated during impact on the ratcheting motion, allowing us to rationalize the majority of our experimental findings.
- Open Access
- 2 August 2017
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 826, 97-127
Non-wetting impact of a sphere onto a bath and its application to bouncing droplets
We present a fully predictive model for the impact of a smooth, convex and perfectly hydrophobic solid onto the free surface of an incompressible fluid bath of infinite depth in a regime where surface tension is important. During impact, we impose natural kinematic constraints along the portion of the fluid interface that is pressed by the solid. This provides a mechanism for the generation of linear surface waves and simultaneously yields the pressure applied on the impacting masses. The model compares remarkably well with data of the impact of spheres and bouncing droplet experiments, and is completely free of any of impact parametrisation.
- 2 August 2017
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 826, 97-127
Open AccessNon-wetting impact of a sphere onto a bath and its application to bouncing droplets
We present a fully predictive model for the impact of a smooth, convex and perfectly hydrophobic solid onto the free surface of an incompressible fluid bath of infinite depth in a regime where surface tension is important. During impact, we impose natural kinematic constraints along the portion of the fluid interface that is pressed by the solid. This provides a mechanism for the generation of linear surface waves and simultaneously yields the pressure applied on the impacting masses. The model compares remarkably well with data of the impact of spheres and bouncing droplet experiments, and is completely free of any of impact parametrisation.
- 11 October 2016
- Published by Springer Nature in Experiments in Fluids
- Vol. 57 (10) , 1-7
Surface topography measurements of the bouncing droplet experiment
- 11 October 2016
- Published by Springer Nature in Experiments in Fluids
- Vol. 57 (10) , 1-7
Surface topography measurements of the bouncing droplet experiment
- Open Access
- 31 July 2015
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 778, 361-388
Faraday pilot-wave dynamics: modelling and computation
A millimetric droplet bouncing on the surface of a vibrating fluid bath can self-propel by virtue of a resonant interaction with its own wave field. This system represents the first known example of a pilot-wave system of the form envisaged by Louis de Broglie in his double-solution pilot-wave theory. We here develop a fluid model of pilot-wave hydrodynamics by coupling recent models of the droplet’s bouncing dynamics with a more realistic model of weakly viscous quasi-potential wave generation and evolution. The resulting model is the first to capture a number of features reported in experiment, including the rapid transient wave generated during impact, the Doppler effect and walker–walker interactions.
- 31 July 2015
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 778, 361-388
Open AccessFaraday pilot-wave dynamics: modelling and computation
A millimetric droplet bouncing on the surface of a vibrating fluid bath can self-propel by virtue of a resonant interaction with its own wave field. This system represents the first known example of a pilot-wave system of the form envisaged by Louis de Broglie in his double-solution pilot-wave theory. We here develop a fluid model of pilot-wave hydrodynamics by coupling recent models of the droplet’s bouncing dynamics with a more realistic model of weakly viscous quasi-potential wave generation and evolution. The resulting model is the first to capture a number of features reported in experiment, including the rapid transient wave generated during impact, the Doppler effect and walker–walker interactions.