CGChase T. Gabbard

Chase T. Gabbard

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Chase T. Gabbard has a total of 19 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Droplet rebounds off a fluid bath at low Weber numbers

    by Elvis A. Agüero, Carlos A. Galeano-Rios, Clodoaldo Ragazzo, Chase T. Gabbard, Daniel M. Harris, Paul A. Milewski

    We present a method to simulate non-coalescing impacts and rebounds of droplets onto the free surface of a liquid bath, together with new experimental data, focused on the low-speed impact of droplets. The method is derived from first principles and imposes only natural geometric and kinematic constraints on the motion of the impacting interfaces, yielding predictions for the evolution of the contact area, pressure distribution and wave field generated on both impacting masses. This work generalises an existing kinematic-match method whose prior applications dealt with deformation of the surface of the bath only; i.e. neglecting that of the droplet. The method’s extension to include droplet deformation gives predictions that compare favourably with existing experimental results and our new experiments conducted in the low-Weber-number regime.


  • Granular collapse on particle-laden water

    by Nathan Reyner, Chase T. Gabbard, Joshua B. Bostwick


  • Forced destabilization of a granular raft

    by Chase T. Gabbard, Edward Whitesell, Joshua B. Bostwick

  • Improving wet scrubber efficiency using fiber‐guided drops

    by Chase T. Gabbard, James T. Rhoads, Joshua B. Bostwick, J. R. Saylor

    Wet scrubbers are widely used to mitigate fossil fuel emissions, making improvements in their efficiency an impactful pursuit. In this study, we analyze an atypical approach to liquid distribution in wet scrubbers that uses liquid drops flowing down vertical fibers which offers several benefits. These include extended residence time, reduced pressure drop, monodisperse drop size distributions and tunability of all of these, including the drop number density. The residence time and drop number density are the most significant of the aforementioned effects and are strongly affected by viscosity. Accordingly, we chose to study silicone oils, available in a range of viscosities, to investigate the scavenging coefficient of fiber‐guided drops, and demonstrate their potential to enhance wet scrubber performance. Additionally, we identify optimal system parameters for effectively capturing particles across a range of particle diameters, paving the way for more efficient wet scrubbers.

  • Open Access

    Drop rebound at low Weber number

    by Chase T. Gabbard, Elvis A. Agüero, Radu Cimpeanu, Katharina Kuehr, Eli Silver, Jack-William Barotta, Carlos A. Galeano-Rios, Daniel M. Harris

    We study the rebound of drops impacting non-wetting substrates at low Weber number ( $\textit{We}$ ) through experiment, direct numerical simulation and reduced-order modelling. Submillimetre-sized drops are normally impacted onto glass slides coated with a thin viscous film that allows them to rebound without contact line formation. Experiments are performed with various drop viscosities, sizes and impact velocities, and we directly measure metrics pertinent to spreading, retraction and rebound using high-speed imaging. We complement experiments with direct numerical simulation and a fully predictive reduced-order model that applies natural geometric and kinematic constraints to simulate the drop shape and dynamics using a spectral method. At low $\textit{We}$ , drop rebound is characterised by a weaker dependence of the coefficient of restitution on $\textit{We}$ than in the more commonly studied high- $\textit{We}$ regime, with nearly $\textit{We}$ -independent rebound in the inertio-capillary limit, and an increasing contact time as $\textit{We}$ decreases. Drops with higher viscosity or size interact with the substrate longer, have a lower coefficient of restitution and stop bouncing sooner, in good quantitative agreement with our reduced-order model. In the inertio-capillary limit, low- $\textit{We}$ rebound has nearly symmetric spreading and retraction phases and a coefficient of restitution near unity. Increasing $\textit{We}$ or viscosity breaks this symmetry, coinciding with a drop in the coefficient of restitution and an increased dependence on $\textit{We}$ . Lastly, the maximum drop deformation and spreading are related through energy arguments, providing a comprehensive framework for drop impact and rebound at low $\textit{We}$ .


  • Open Access

    Scaling analysis for the frequency of Ostwaldian and Newtonian bead-on-fibre flows

    by Chase T. Gabbard, James T. Rhoads, Jean-Marc Delhaye, Joshua B. Bostwick

    Liquid flowing down a fibre readily destabilises into a train of beads, commonly called a bead-on-fibre pattern. Bead formation results from capillary-driven instability and gives rise to patterns with constant velocity and time-invariant bead frequency $f$ whenever the instability is absolute. In this study, we develop a scaling law for $f$ that relates the Strouhal number $St$ and capillary number $Ca$ for Ostwaldian power-law liquids with Newtonian liquids recovered as a limiting case. We validate our proposed scaling law by comparing it with prior experimental data and new experimental data using xanthan gum solutions to produce a low capillary number $Ca \leq 10^{-2}$ regime. The experimental data encompasses both Ostwaldian and Newtonian flow, as well as symmetric and asymmetric patterns, and we find the data collapses along the predicted trend across seven orders of magnitude in $Ca$ . Our proposed scaling law is a powerful tool for studying and applying bead-on-fibre flows where $f$ is critical, such as heat and mass transfer systems.


  • Open Access

    Suppressing capillary instability in falling liquid threads

    by Chase T. Gabbard, James T. Rhoads, Joshua B. Bostwick

    A cylindrical liquid thread readily destabilizes into a series of drops due to capillary instability, which is also responsible for undesirable bead-on-fibre structures observed when coating a thin fibre. In this experimental study, we show how a falling liquid thread can be stabilized by internally distorting the cross-sectional shape using two vertically hung fibres. Below a critical flow rate $Q_c$ , the dual-fibre system deforms the falling thread into a smooth column with a non-circular cross-section, thereby suppressing instability. Above $Q_{{c}}$ , the cylindrical thread is left undeformed by the fibres and destabilizes into beads connected by a stable, non-cylindrical film. An empirical stability threshold is identified showing that flow delays the onset of capillary instability when compared with a marginally stable quasi-static coating. When the flow is unstable $Q>Q_c$ , the bead velocity $v$ obeys a simple scaling law that is well supported by our experiments over a large parameter range. This suppression technique can be extended to other slender geometries, such as a ribbon, which shows similar qualitative results but exhibits a different stability threshold due to spontaneous dewetting about its short edge.


  • Open Access

    Coat or collapse?

    by Chase T. Gabbard, Edward L. Whitesell, Joshua B. Bostwick

    This paper is associated with a poster winner of a 2023 American Physical Society's Division of Fluid Dynamics (DFD) Milton van Dyke Award for work presented at the DFD Gallery of Fluid Motion. The original poster is available online at the Gallery of Fluid Motion, . Published by the American Physical Society 2024


  • Open Access

    Dip coating of shear-thinning particulate suspensions

    by D. Ding, C. T. Gabbard, J. B. Bostwick

    Dip coating a planar substrate with a suspension of particles in a shear-thinning liquid will entrain particles in the liquid film, facilitating filtration and sorting of particles. Experiments were performed for both monodisperse and bidisperse particle suspensions of shear-thinning Xanthan Gum solutions. Particle entrainment occurs when the coating thickness at the stagnation point of the thin film flow is larger than the particle diameter. A model is developed to predict the entrainment criteria using lubrication theory applied to an Ostwald power-law fluid which yields a modified Landau–Levich–Derjaguin (LLD) law governing the coating film thickness that depends upon a properly defined capillary number Ca. The critical withdrawal velocity for particle entrainment depends upon the particle size and fluid rheology through a relationship between Ca and the bond number Bo, which agrees well with our model predictions and prior experimental results of A. Sauret et al. Phys. Rev. Fluids, 2019, 4, 054303 for the limiting case of Newtonian suspensions. Single particle entrainment and particle clustering is observed for monodisperse suspensions, which depends on Ca and the particle volume fraction ϕ. In bidisperse suspensions, particle sorting can occur whereby only the smaller particles are entrained in the film over an active filtration range of Ca and Bo, which also agrees well with our model predictions.