Alexey Petrovich Slobozhanyuk
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Alexey Petrovich Slobozhanyuk has a total of 251 co-authors. Here are the top co-authors by number of shared publications:
- Alena Vadimovna Shchelokova
ITMO University
30 shared publications P. A. Belov
School of Physics and Engineering, ITMO University, St. Petersburg, Russia
28 shared publications- Dmitry S. Filonov
Moscow Institute of Physics and Technology
27 shared publications Pavel A. Belov
Department of Nanophotonics and Metamaterials, ITMO University 1 , St. Petersburg 197101, Russia
26 shared publicationsYuri S. Kivshar
Nonlinear Physics Center, Research School of Physics, Australian National University 3 , Canberra, ACT 2601, Australia
24 shared publications- Maxim A. Gorlach
ITMO University
12 shared publications
Latest Publications
- 12 February 2026
- Published by Springer Nature in Nature Materials
- Vol. 25 (5) , 762-766
Helical metasurfaces based on topological surface states in three-dimensional photonic topological insulators
Topological photonics expands the landscape of artificial electromagnetic materials and provides a variety of responses via robust boundary modes. Three-dimensional photonic topological insulators are predicted to host robust spin–momentum-locked surface states. However, their all-dielectric experimental realization has remained a fundamental challenge. Here we demonstrate a practical realization of a three-dimensional all-dielectric photonic topological insulator. We show a complete photonic topological bandgap as well as gapless topological surface states trapped on open boundaries of topological systems. The coupling of these states to the radiative continuum offers opportunities for controlling the emission of electromagnetic waves. We unveil that open interfaces in three-dimensional photonic topological insulators behave as effective metasurfaces and show that the helical nature of topological surface states supported by the interfaces enables control over far-field emission via the pseudo-spin degree of freedom. Further structuring of the topological interfaces provides further enhancement of such effective metasurfaces by offering control over far-field radiation patterns and directionality of the surface state emission.
- 12 February 2026
- Published by Springer Nature in Nature Materials
- Vol. 25 (5) , 762-766
Helical metasurfaces based on topological surface states in three-dimensional photonic topological insulators
Topological photonics expands the landscape of artificial electromagnetic materials and provides a variety of responses via robust boundary modes. Three-dimensional photonic topological insulators are predicted to host robust spin–momentum-locked surface states. However, their all-dielectric experimental realization has remained a fundamental challenge. Here we demonstrate a practical realization of a three-dimensional all-dielectric photonic topological insulator. We show a complete photonic topological bandgap as well as gapless topological surface states trapped on open boundaries of topological systems. The coupling of these states to the radiative continuum offers opportunities for controlling the emission of electromagnetic waves. We unveil that open interfaces in three-dimensional photonic topological insulators behave as effective metasurfaces and show that the helical nature of topological surface states supported by the interfaces enables control over far-field emission via the pseudo-spin degree of freedom. Further structuring of the topological interfaces provides further enhancement of such effective metasurfaces by offering control over far-field radiation patterns and directionality of the surface state emission.
- 23 December 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (26)
Quasi-BIC realized in a subwavelength volumetric split ring-based resonator
In recent years, resonant structures with quasi-bound states in the continuum (quasi-BICs) have significantly expanded the practical possibilities in optics and nanophotonics. A similar mode, the so-called supercavity mode, observed in single dielectric cylinders with high permittivity and low material losses, allows achieving extremely high quality (Q) factors. Resonators supporting quasi-BICs are also promising for applications in the radio frequency range. However, creating compact structures using high-permittivity materials at frequencies below 300 MHz is challenging. This study introduces a subwavelength (∼λ/13) volumetric structure composed of two arrays of coupled split ring resonators, with one array located inside the other, which provides a supercavity mode. The numerical Q factor of this mode is increased by approximately 100 times under lossless conditions and by about 1.5 times when accounting for material losses compared to that of non-interacting modes of the two arrays. The Q factor enhancement is confirmed experimentally by near-field measurements. The advantages of the proposed resonator include its hollow cavity, ease of fabrication, and frequency tunability within the radio frequency range.
- 23 December 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (26)
Quasi-BIC realized in a subwavelength volumetric split ring-based resonator
In recent years, resonant structures with quasi-bound states in the continuum (quasi-BICs) have significantly expanded the practical possibilities in optics and nanophotonics. A similar mode, the so-called supercavity mode, observed in single dielectric cylinders with high permittivity and low material losses, allows achieving extremely high quality (Q) factors. Resonators supporting quasi-BICs are also promising for applications in the radio frequency range. However, creating compact structures using high-permittivity materials at frequencies below 300 MHz is challenging. This study introduces a subwavelength (∼λ/13) volumetric structure composed of two arrays of coupled split ring resonators, with one array located inside the other, which provides a supercavity mode. The numerical Q factor of this mode is increased by approximately 100 times under lossless conditions and by about 1.5 times when accounting for material losses compared to that of non-interacting modes of the two arrays. The Q factor enhancement is confirmed experimentally by near-field measurements. The advantages of the proposed resonator include its hollow cavity, ease of fabrication, and frequency tunability within the radio frequency range.
- Open Access
- 11 December 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 123 (24)
Quasi-BIC high-index resonators for liquid characterization and analysis
Capabilities to monitor the purity and mixture composition of liquids with the aid of low-cost portable devices can grant essential advantages in maintaining personal health safety. The overwhelming majority of consumer wireless devices operate at relatively small operational bandwidth, thus not allowing for retrieving material composition via dispersion characteristics. To mitigate the bandwidth limitations, resonant methods, granting precision in a small frequency window, might be of use. Here, we demonstrate a liquid sensor able to provide 90.5 kHz/RIU sensitivities owing to a resonator, supporting high-quality factor quasi-bound states in the continuum. The sensor's architecture encompasses a high-permittivity ceramic resonator and a capillary wrapped around it. The volumetric design increases the overlap between the electromagnetic mode and the liquid under test while maintaining resonant conditions within a relatively narrow frequency band. To demonstrate the capabilities of the proposed method, the UHF RFID band was considered, and temperature dependence of the distilled water permittivity was retrieved. Interfacing standalone low-cost electromagnetic sensors with widely available consumer-level wireless devices offers promising opportunities that contribute to the paradigm shift toward IoT.
- 11 December 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 123 (24)
Open AccessQuasi-BIC high-index resonators for liquid characterization and analysis
Capabilities to monitor the purity and mixture composition of liquids with the aid of low-cost portable devices can grant essential advantages in maintaining personal health safety. The overwhelming majority of consumer wireless devices operate at relatively small operational bandwidth, thus not allowing for retrieving material composition via dispersion characteristics. To mitigate the bandwidth limitations, resonant methods, granting precision in a small frequency window, might be of use. Here, we demonstrate a liquid sensor able to provide 90.5 kHz/RIU sensitivities owing to a resonator, supporting high-quality factor quasi-bound states in the continuum. The sensor's architecture encompasses a high-permittivity ceramic resonator and a capillary wrapped around it. The volumetric design increases the overlap between the electromagnetic mode and the liquid under test while maintaining resonant conditions within a relatively narrow frequency band. To demonstrate the capabilities of the proposed method, the UHF RFID band was considered, and temperature dependence of the distilled water permittivity was retrieved. Interfacing standalone low-cost electromagnetic sensors with widely available consumer-level wireless devices offers promising opportunities that contribute to the paradigm shift toward IoT.
- 20 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Radio Frequency Identification
- Vol. 7, 601-608
Caramel UHF RFID Sensors for Pest Monitoring
The emerging need for green technologies motivates the development of new approaches to manufacture electronic consumables. In case of low-cost mass-production sensors, the problem becomes even more severe due to the generation of environmental waste. Here we demonstrate an RFID-type sensor based on a caramel substrate with a micron-scale conductive layer. The device, being primarily made of sugar, attracts insects, which consume it almost completely. As an application, we demonstrate a tag that can be applied for remote pest monitoring. In the experiment, a long-range UHF RFID communication channel is established and monitored over time. An RFID-on-caramel tag consumed by insects loses its connection with a reader, indicating the presence of pests. We show the new caramel-based devices to communicate with a reader over a 10-meter distance, paving the way to remote crop monitoring. Such low-cost biodegradable sensors are highly promising for smart agriculture, warehouse management, and stock monitoring approaches.
- 20 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Radio Frequency Identification
- Vol. 7, 601-608
Caramel UHF RFID Sensors for Pest Monitoring
The emerging need for green technologies motivates the development of new approaches to manufacture electronic consumables. In case of low-cost mass-production sensors, the problem becomes even more severe due to the generation of environmental waste. Here we demonstrate an RFID-type sensor based on a caramel substrate with a micron-scale conductive layer. The device, being primarily made of sugar, attracts insects, which consume it almost completely. As an application, we demonstrate a tag that can be applied for remote pest monitoring. In the experiment, a long-range UHF RFID communication channel is established and monitored over time. An RFID-on-caramel tag consumed by insects loses its connection with a reader, indicating the presence of pests. We show the new caramel-based devices to communicate with a reader over a 10-meter distance, paving the way to remote crop monitoring. Such low-cost biodegradable sensors are highly promising for smart agriculture, warehouse management, and stock monitoring approaches.
- 9 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 138-140
Ceramic RFID Tag for Omnidirectional Long-Range Communication
Radio frequency identification (RFID) is a wireless technology that allows contactless readout of data, encoded on time-modulated backscattering from a passive device. While this technology was already found beneficial in many retail applications, its further spread demands developing pathways to reading range extension and immunity to an interrogation direction. Here we demonstrate a new architecture, where a standard metallic RFID tag antenna is replaced by a ceramic resonator. The high permittivity of the structure allows encompassing of several cascaded resonances within a subwavelength volume and exploits the multi-channel operation of the communication link to shrink the footprint of the device. Spectral sharing between several mutually orthogonal dipolar resonances is designed to achieve an omnidirectional operation. As a result, a structure, encompassed in a 15 mm radius sphere, assessable from a 16 $\mathbf{m}$ distance is numerically demonstrated. By now, this is the best reading range in the category of omnidirectional RFID tags. Further efforts on footprint reduction can bring ceramic RFID architectures towards mm-scale layouts, making them beneficial in numerous applications, including the Internet of Small Things.- 9 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 138-140
Ceramic RFID Tag for Omnidirectional Long-Range Communication
Radio frequency identification (RFID) is a wireless technology that allows contactless readout of data, encoded on time-modulated backscattering from a passive device. While this technology was already found beneficial in many retail applications, its further spread demands developing pathways to reading range extension and immunity to an interrogation direction. Here we demonstrate a new architecture, where a standard metallic RFID tag antenna is replaced by a ceramic resonator. The high permittivity of the structure allows encompassing of several cascaded resonances within a subwavelength volume and exploits the multi-channel operation of the communication link to shrink the footprint of the device. Spectral sharing between several mutually orthogonal dipolar resonances is designed to achieve an omnidirectional operation. As a result, a structure, encompassed in a 15 mm radius sphere, assessable from a 16 $\mathbf{m}$ distance is numerically demonstrated. By now, this is the best reading range in the category of omnidirectional RFID tags. Further efforts on footprint reduction can bring ceramic RFID architectures towards mm-scale layouts, making them beneficial in numerous applications, including the Internet of Small Things.- 16 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 72 (2) , 1416-1423
Trapping EM Power by Hollow Cylinders
Thin tubes can trap the electromagnetic (EM) energy, emitted wirelessly from a near-field source. The optimal dimensions of these hollow cylinders are determined for an extensive range of complex permittivities characterizing their material and the reported power enhancement is found practically independent of the antenna location. The spatial distribution of the signal reveals the reshaping in the paths of incoming rays and unveils the nature of the developed resonances in the vicinity of the photonic tubes, for both wave polarizations. The concept is experimentally demonstrated at the UHF band with the use of dense dielectric claddings; enhancement up to two orders of magnitude is recorded. The presented results constitute limits in terms of the EM energy accumulation for a simple configuration and, thus, can be utilized in various wireless power transfer (WPT) applications.
- 16 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 72 (2) , 1416-1423
Trapping EM Power by Hollow Cylinders
Thin tubes can trap the electromagnetic (EM) energy, emitted wirelessly from a near-field source. The optimal dimensions of these hollow cylinders are determined for an extensive range of complex permittivities characterizing their material and the reported power enhancement is found practically independent of the antenna location. The spatial distribution of the signal reveals the reshaping in the paths of incoming rays and unveils the nature of the developed resonances in the vicinity of the photonic tubes, for both wave polarizations. The concept is experimentally demonstrated at the UHF band with the use of dense dielectric claddings; enhancement up to two orders of magnitude is recorded. The presented results constitute limits in terms of the EM energy accumulation for a simple configuration and, thus, can be utilized in various wireless power transfer (WPT) applications.
- 1 December 2022
- Published by Allerton Press in Bulletin of the Russian Academy of Sciences: Physics
- Vol. 86 (S1) , S216-S221
Detunable Wire Metasurface for Applications in Magnetic Resonance Imaging
We introduce a detunable wire metasurface that can electromagnetically couple to an external transmit coil to increase local magnetic resonance imaging (MR
- 1 December 2022
- Published by Allerton Press in Bulletin of the Russian Academy of Sciences: Physics
- Vol. 86 (S1) , S216-S221
Detunable Wire Metasurface for Applications in Magnetic Resonance Imaging
We introduce a detunable wire metasurface that can electromagnetically couple to an external transmit coil to increase local magnetic resonance imaging (MR
- 5 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Passive temperature sensor tag based on quasi-BIC
In this work, a highly sensitive temperature sensor based on bound states in the continuum (BIC) was proposed. A ceramic resonator with a half-cylindrical shape placed above a ground plane and designed to support high-quality factor supercavity modes. Experimentally, the sensor has been demonstrated to operate in a wide temperature range, from 25 to 105 C, with a resolution of 0.2 C. The sensors high-precision performance is based on the use of high-quality ferroelectric ceramics capable of supporting the confined modes with a high quality factor of more than 1000.
- 5 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Passive temperature sensor tag based on quasi-BIC
In this work, a highly sensitive temperature sensor based on bound states in the continuum (BIC) was proposed. A ceramic resonator with a half-cylindrical shape placed above a ground plane and designed to support high-quality factor supercavity modes. Experimentally, the sensor has been demonstrated to operate in a wide temperature range, from 25 to 105 C, with a resolution of 0.2 C. The sensors high-precision performance is based on the use of high-quality ferroelectric ceramics capable of supporting the confined modes with a high quality factor of more than 1000.
- 6 June 2022
- Published by AIP Publishing in Applied Physics Letters
- Vol. 120 (23) , 233105
Temperature control of electromagnetic topological edge states
Topological photonics provides exceptional opportunities to control electromagnetic waves with a great potential for applications. Most of the proposed photonic systems support topological edge states with fixed parameters, thus hindering their practical applications. The study of nonlinear and tunable effects in topological systems enlarges applications of topological phenomena. Here, we propose an approach for the manipulation of photonic topological edge states based on temperature tuning. We design and demonstrate experimentally topological zigzag arrays composed of high-index resonators. The resonators are fabricated from ferroelectrics that brings an opportunity to dynamically change their permittivity by heating. We study the emergence of topological edge states in zigzag arrays of ferroelectric particles supporting the Mie resonances and demonstrate the topological transition induced by heating individual resonators in the array.
- 6 June 2022
- Published by AIP Publishing in Applied Physics Letters
- Vol. 120 (23) , 233105
Temperature control of electromagnetic topological edge states
Topological photonics provides exceptional opportunities to control electromagnetic waves with a great potential for applications. Most of the proposed photonic systems support topological edge states with fixed parameters, thus hindering their practical applications. The study of nonlinear and tunable effects in topological systems enlarges applications of topological phenomena. Here, we propose an approach for the manipulation of photonic topological edge states based on temperature tuning. We design and demonstrate experimentally topological zigzag arrays composed of high-index resonators. The resonators are fabricated from ferroelectrics that brings an opportunity to dynamically change their permittivity by heating. We study the emergence of topological edge states in zigzag arrays of ferroelectric particles supporting the Mie resonances and demonstrate the topological transition induced by heating individual resonators in the array.
- 7 April 2022
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 17 (4) , 044014
Energy-Harvesting Coil for Circularly Polarized Fields in Magnetic Resonance Imaging
Specialized radio-frequency coils and sensors placed inside a magnetic resonance imaging (MRI) scanner considerably extend its functionality. However, since cable-connected in-bore devices have several disadvantages compared to the wireless ones, the latter are currently under active development. One of the promising concepts in wireless MRI coils is energy harvesting, which relies on converting the energy carried by the radio-frequency MRI field without the need for additional transmitters, similar to common wireless power-transfer solutions. In this paper, we propose a compact harvesting coil design based on the combination of loop and butterfly coils that allows energy harvesting of a circularly polarized field. By performing numerical simulations and experiments with commonly used Siemens Espree and Avanto tesla MRI scanners, we demonstrate that the proposed approach is safe, efficient, does not decrease the quality of MRI images, and allows doubling the harvested voltage compared to the setups with linearly polarized fields.- 7 April 2022
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 17 (4) , 044014
Energy-Harvesting Coil for Circularly Polarized Fields in Magnetic Resonance Imaging
Specialized radio-frequency coils and sensors placed inside a magnetic resonance imaging (MRI) scanner considerably extend its functionality. However, since cable-connected in-bore devices have several disadvantages compared to the wireless ones, the latter are currently under active development. One of the promising concepts in wireless MRI coils is energy harvesting, which relies on converting the energy carried by the radio-frequency MRI field without the need for additional transmitters, similar to common wireless power-transfer solutions. In this paper, we propose a compact harvesting coil design based on the combination of loop and butterfly coils that allows energy harvesting of a circularly polarized field. By performing numerical simulations and experiments with commonly used Siemens Espree and Avanto tesla MRI scanners, we demonstrate that the proposed approach is safe, efficient, does not decrease the quality of MRI images, and allows doubling the harvested voltage compared to the setups with linearly polarized fields.