Hoichang Yang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hoichang Yang has a total of 218 co-authors. Here are the top co-authors by number of shared publications:
Mi Jang
Department of Applied Organic Materials Engineering, Division of Nano-systems Engineering, Inha University , 22212 Incheon, Korea
20 shared publicationsMingyuan Pei
Department of Chemical Engineering Inha University Incheon 22212 Republic of Korea
13 shared publicationsSe Hyun Kim
Department of Nano Medical and Polymer Materials Yeungnam University Gyeongsan 712‐749 South Korea
9 shared publications- Chan Eon Park
Department of Chemical Engineering, Pohang University of Science and Technology, Pohang 37673, Korea
8 shared publications Minjung Lee
Department of Applied Organic Materials Engineering, Inha University, Incheon 22212, Korea
6 shared publications- Jae Kyeong Jeong
Hanyang University
5 shared publications
Latest Publications
- 13 November 2026
- Published by Wiley in Advanced Materials
Molecularly Programmed Stress Dissipation Strategy for Ultrastretchable Neuromorphic Electronics
Intrinsically stretchable organic synaptic transistors (ISOSTs) using semiconducting polymers (SPs) hold promise for on‐body signal processing by mimicking biological synaptic functions and processing temporal bio‐signals directly at or near the point of data acquisition. However, conventional SPs designed primarily to increase polymer softness and mechanical compliance often lack molecular‐level mechanisms for effective stress dissipation, thereby limiting device‐level stretchability to below 100% and causing substantial degradation in electrical performance. Here, we demonstrate ISOSTs achieving 150% device‐level stretchability through molecularly programmed stress dissipation (MPSD) of an SP without incorporating soft segments into the backbone. This strategy promotes conformational flexibility and suppresses side‐chain interdigitation, enhancing chain dynamics and amplifying mechanical contrast between crystalline and amorphous domains. This facilitates localized stress accommodation and induces the formation of nano‐to‐micro scale crack clusters, termed artificial stretch marks (ASMs), which emulate the adaptive mechanical behavior of human skin. Leveraging this mechanism, ISOSTs maintain 83.8% of maximum current even under 150% strain while preserving synaptic behaviors. Furthermore, physical reservoir computing using the ISOSTs preserves electromyography classification performance under 150% tensile strain. This work presents a biomimetic stress dissipation strategy for intrinsically stretchable and stress‐adaptive neuromorphic electronics.
- 13 November 2026
- Published by Wiley in Advanced Materials
Molecularly Programmed Stress Dissipation Strategy for Ultrastretchable Neuromorphic Electronics
Intrinsically stretchable organic synaptic transistors (ISOSTs) using semiconducting polymers (SPs) hold promise for on‐body signal processing by mimicking biological synaptic functions and processing temporal bio‐signals directly at or near the point of data acquisition. However, conventional SPs designed primarily to increase polymer softness and mechanical compliance often lack molecular‐level mechanisms for effective stress dissipation, thereby limiting device‐level stretchability to below 100% and causing substantial degradation in electrical performance. Here, we demonstrate ISOSTs achieving 150% device‐level stretchability through molecularly programmed stress dissipation (MPSD) of an SP without incorporating soft segments into the backbone. This strategy promotes conformational flexibility and suppresses side‐chain interdigitation, enhancing chain dynamics and amplifying mechanical contrast between crystalline and amorphous domains. This facilitates localized stress accommodation and induces the formation of nano‐to‐micro scale crack clusters, termed artificial stretch marks (ASMs), which emulate the adaptive mechanical behavior of human skin. Leveraging this mechanism, ISOSTs maintain 83.8% of maximum current even under 150% strain while preserving synaptic behaviors. Furthermore, physical reservoir computing using the ISOSTs preserves electromyography classification performance under 150% tensile strain. This work presents a biomimetic stress dissipation strategy for intrinsically stretchable and stress‐adaptive neuromorphic electronics.
- Open Access
- 12 September 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (86) , e78441
Structure‐Guided Balancing of Ambipolar Transport Enables Symmetric Switching in Heterojunction Bilayer Organic Transistor Inverters
High inverter performance in ambipolar organic electronics requires balanced channel strengths rather than maximized single‐carrier mobility. Here, we demonstrate symmetric switching through balanced ambipolar transport in vertically stacked pentacene/ N , N ′‐ditridecylperylene‐3,4,9,10‐tetracarboxylic diimide (PTCDI‐C 13 ) heterojunction bilayers (HJBs) fabricated on polymer‐grafted SiO 2 dielectrics. By systematically tuning the nominal equivalent (1–4 monolayers, ML s) and thermal reorganization of the PTCDI‐C 13 underlayer, a structural symmetry window is identified in which intermolecular self‐assembly stabilizes both carrier mobility and threshold‐voltage alignment. Under optimized conditions (3 ML , 150°C annealed), nearly identical hole and electron mobilities (∼1.0 cm 2 V − 1 s − 1 ) and convergent threshold voltages enable complementary‐like inverters exhibiting high voltage gain (>200) and large noise margins under ±80 V operation. At absolute supply voltage (| V DD |) = 80 V, the extracted low‐ and high‐state noise margins are approximately 29.9–33.9 V, corresponding to approximately 75–85% of | V DD |/2. Notably, imbalanced charge transport degrades switching symmetry despite improved unipolar mobility, revealing a non‐monotonic relationship between molecular ordering and circuit performance. These results establish interface‐mediated self‐assembly as a structure‐guided route for engineering transport symmetry in organic HJBs, while broader material generality and manufacturing scalability remain to be established.
- 12 September 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (86) , e78441
Open AccessStructure‐Guided Balancing of Ambipolar Transport Enables Symmetric Switching in Heterojunction Bilayer Organic Transistor Inverters
High inverter performance in ambipolar organic electronics requires balanced channel strengths rather than maximized single‐carrier mobility. Here, we demonstrate symmetric switching through balanced ambipolar transport in vertically stacked pentacene/ N , N ′‐ditridecylperylene‐3,4,9,10‐tetracarboxylic diimide (PTCDI‐C 13 ) heterojunction bilayers (HJBs) fabricated on polymer‐grafted SiO 2 dielectrics. By systematically tuning the nominal equivalent (1–4 monolayers, ML s) and thermal reorganization of the PTCDI‐C 13 underlayer, a structural symmetry window is identified in which intermolecular self‐assembly stabilizes both carrier mobility and threshold‐voltage alignment. Under optimized conditions (3 ML , 150°C annealed), nearly identical hole and electron mobilities (∼1.0 cm 2 V − 1 s − 1 ) and convergent threshold voltages enable complementary‐like inverters exhibiting high voltage gain (>200) and large noise margins under ±80 V operation. At absolute supply voltage (| V DD |) = 80 V, the extracted low‐ and high‐state noise margins are approximately 29.9–33.9 V, corresponding to approximately 75–85% of | V DD |/2. Notably, imbalanced charge transport degrades switching symmetry despite improved unipolar mobility, revealing a non‐monotonic relationship between molecular ordering and circuit performance. These results establish interface‐mediated self‐assembly as a structure‐guided route for engineering transport symmetry in organic HJBs, while broader material generality and manufacturing scalability remain to be established.
- 9 February 2026
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 13 (3) , 1552-1565
Template-guided self-assembly of semiconducting polymers in crystallizable solvent-induced nanoconfinement
The morphology and chain orientation of conjugated polymer films strongly influence their charge transport properties.
- 9 February 2026
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 13 (3) , 1552-1565
Template-guided self-assembly of semiconducting polymers in crystallizable solvent-induced nanoconfinement
The morphology and chain orientation of conjugated polymer films strongly influence their charge transport properties.
- Top Cited Papers
- 14 January 2026
- Published by Springer Nature in Nature
- Vol. 649 (8097) , 604-611
Exciplex-enabled high-efficiency, fully stretchable OLEDs
Fully stretchable organic light-emitting diodes (OLEDs), composed entirely of intrinsically stretchable materials, are essential for on-skin displays1,2,3. However, their low device efficiency has been a persistent barrier to practical applications for more than a decade4. Here we addressed this challenge by incorporating an intrinsically stretchable exciplex-assisted phosphorescent (ExciPh) layer. The elastomer-tolerant triplet-recycling mechanism mitigates exciton energy transfer limitations arising from the insulating elastomer matrix, yielding a light-emitting layer with more than 200% stretchability and an external quantum efficiency (EQE) of 21.7%. To translate this performance to fully stretchable devices, we integrated MXene-contact stretchable electrodes (MCSEs), which feature high mechanical robustness and tunable work function (WF), ensuring efficient hole and electron injection. These advances enable fully stretchable OLEDs with a record EQE of 17.0% and minimal luminescence loss under 60% strain. This approach to designing high-efficiency, mechanically compliant optoelectronics will enable the next-generation wearable and deformable displays.
- 14 January 2026
- Published by Springer Nature in Nature
- Vol. 649 (8097) , 604-611
Top Cited PapersExciplex-enabled high-efficiency, fully stretchable OLEDs
Fully stretchable organic light-emitting diodes (OLEDs), composed entirely of intrinsically stretchable materials, are essential for on-skin displays1,2,3. However, their low device efficiency has been a persistent barrier to practical applications for more than a decade4. Here we addressed this challenge by incorporating an intrinsically stretchable exciplex-assisted phosphorescent (ExciPh) layer. The elastomer-tolerant triplet-recycling mechanism mitigates exciton energy transfer limitations arising from the insulating elastomer matrix, yielding a light-emitting layer with more than 200% stretchability and an external quantum efficiency (EQE) of 21.7%. To translate this performance to fully stretchable devices, we integrated MXene-contact stretchable electrodes (MCSEs), which feature high mechanical robustness and tunable work function (WF), ensuring efficient hole and electron injection. These advances enable fully stretchable OLEDs with a record EQE of 17.0% and minimal luminescence loss under 60% strain. This approach to designing high-efficiency, mechanically compliant optoelectronics will enable the next-generation wearable and deformable displays.
- 14 April 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (16) , 24262-24273
Improved π-Conjugation Structure of Vacuum-Processable Organic Semiconductor Mediated from Molecular Crystal Templates
Highly π-conjugated self-assembly of organic semiconductors near gate dielectrics is important for achieving high performance in organic thin film transistors (OTFTs). This paper reports that a preexisting N,N-ditridecyl-3,4,9,10-perylenetetracarboxylic diimide (PTCDI-C13) monolayer (ML) on a polymer-passivated silicon oxide dielectric stimulates the 2D crystal growth of the same ad-molecules during subsequent film deposition, resulting in a dramatic enhancement of the π-conjugated structure with suppressed grain boundaries. The crystal template-mediated PTCDI-C13 films could develop layered crystallites with highly intermolecular ordering of edge-on semiconductor molecules perpendicular to the substrate. The crystal reorganization of PTCDI-C13 deposited on the ML-thick crystal template drove the 2D crystal growth of a semiconductor on a heterointerface instead of 3D crystal growth. The charge carrier mobility along the template-mediated crystal grains within a 40 nm-thick film was up to 2.70 cm2 V-1 s-1, 4 times higher than the 0.68 cm2 V-1 s-1 in the ordinary polycrystalline domains developed directly at a heterointerface. Thus, using the predeposited crystal templates may be a good strategy to control the crystal structure and obtain high-quality organic thin films by vacuum deposition or orthogonal solvent film procedures.
- 14 April 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (16) , 24262-24273
Improved π-Conjugation Structure of Vacuum-Processable Organic Semiconductor Mediated from Molecular Crystal Templates
Highly π-conjugated self-assembly of organic semiconductors near gate dielectrics is important for achieving high performance in organic thin film transistors (OTFTs). This paper reports that a preexisting N,N-ditridecyl-3,4,9,10-perylenetetracarboxylic diimide (PTCDI-C13) monolayer (ML) on a polymer-passivated silicon oxide dielectric stimulates the 2D crystal growth of the same ad-molecules during subsequent film deposition, resulting in a dramatic enhancement of the π-conjugated structure with suppressed grain boundaries. The crystal template-mediated PTCDI-C13 films could develop layered crystallites with highly intermolecular ordering of edge-on semiconductor molecules perpendicular to the substrate. The crystal reorganization of PTCDI-C13 deposited on the ML-thick crystal template drove the 2D crystal growth of a semiconductor on a heterointerface instead of 3D crystal growth. The charge carrier mobility along the template-mediated crystal grains within a 40 nm-thick film was up to 2.70 cm2 V-1 s-1, 4 times higher than the 0.68 cm2 V-1 s-1 in the ordinary polycrystalline domains developed directly at a heterointerface. Thus, using the predeposited crystal templates may be a good strategy to control the crystal structure and obtain high-quality organic thin films by vacuum deposition or orthogonal solvent film procedures.
- 10 April 2025
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 12 (14) , 5225-5235
Improving ion uptake in artificial synapses through facilitated diffusion mechanisms
Several studies have explored ways to enhance the interaction between the channel layer and ions to realize artificial synapses using organic electrochemical transistors (OECTs). The attachment of glycol side chains can remarkably enhance the ion transport to improve nonvolatile properties via polar groups; however, a comprehensive and methodical evaluation of this phenomenon has yet to be conducted. In this study, we observed the reactivity toward ions and the doping mechanism that changes by glycol group substitution to the side chains of DPP polymers. The analysis revealed that in the presence of glycol chains, the doping mechanism changes to diffusion-dominated, which allows ions to penetrate the channel and interact with it more intensely, thereby enhancing synaptic performance. The fabricated devices successfully mimicked the behavior of biological synapses, such as good long-term synaptic plasticity (LTP), paired-pulse facilitation (PPF), and long-term potentiation/depression (LTP/D). Based on these properties, a high accuracy of 93.7% has been achieved in an artificial neural network for handwritten data recognition at the Modified national institute of standards and technology (MNIST). These findings provide new insights for the realization of artificial synapses and could inspire other research involving reactions with ions.
- 10 April 2025
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 12 (14) , 5225-5235
Improving ion uptake in artificial synapses through facilitated diffusion mechanisms
Several studies have explored ways to enhance the interaction between the channel layer and ions to realize artificial synapses using organic electrochemical transistors (OECTs). The attachment of glycol side chains can remarkably enhance the ion transport to improve nonvolatile properties via polar groups; however, a comprehensive and methodical evaluation of this phenomenon has yet to be conducted. In this study, we observed the reactivity toward ions and the doping mechanism that changes by glycol group substitution to the side chains of DPP polymers. The analysis revealed that in the presence of glycol chains, the doping mechanism changes to diffusion-dominated, which allows ions to penetrate the channel and interact with it more intensely, thereby enhancing synaptic performance. The fabricated devices successfully mimicked the behavior of biological synapses, such as good long-term synaptic plasticity (LTP), paired-pulse facilitation (PPF), and long-term potentiation/depression (LTP/D). Based on these properties, a high accuracy of 93.7% has been achieved in an artificial neural network for handwritten data recognition at the Modified national institute of standards and technology (MNIST). These findings provide new insights for the realization of artificial synapses and could inspire other research involving reactions with ions.
- 20 March 2025
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 7 (7) , 3010-3018
Sequential Growth of Organic Semiconductor-Based Heterojunction Bilayers for Ambipolar Transistors and Inverters
- 20 March 2025
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 7 (7) , 3010-3018
Sequential Growth of Organic Semiconductor-Based Heterojunction Bilayers for Ambipolar Transistors and Inverters
- 25 February 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (9) , 14329-14341
Exploring the Origin of High Thermal Stability of the Performance of Pseudo-Quaternary All-Polymer Solar Cells
As all-polymer solar cells (all-PSCs) have achieved impressive power conversion efficiencies (PCEs), extending their lifetime under long-term operation is also increasingly important. To address this issue, in this study, a new pseudo-quaternary blend composed of conjugated block copolymer donors and acceptors, PM6-b-TT:b-PYT, is introduced as the active layer for all-PSCs. Compared to the all-PSC based on the traditional binary blend, PM6:BTTP-T, those based on pseudo-quaternary active layer exhibited significantly improved thermal stability after thermal annealing under harsh conditions of 150 °C in an ambient atmosphere. More importantly, to elucidate the morphological stability of the pseudo-quaternary active layer, visible evidence of the thin film's surface and internal structure is carefully investigated by multiple advanced techniques. After extended thermal stress at 150 °C, the binary bulk heterojunction (BHJ) films exhibit excessive polymer chain aggregation, phase separation of the polymers, and increased surface roughness, forming bulk charge traps and increasing the exciton recombination. Meanwhile, the pseudo-quaternary BHJ films maintain the crystallinity and nanostructure of the active layer, improving the stability of the all-PSCs. Overall, this study provides a detailed understanding of the long-term stability of high-efficiency all-PSCs, offering key insights into the polymer section and proposing promising polymer structures for the long-term stability of all-PSCs.
- 25 February 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (9) , 14329-14341
Exploring the Origin of High Thermal Stability of the Performance of Pseudo-Quaternary All-Polymer Solar Cells
As all-polymer solar cells (all-PSCs) have achieved impressive power conversion efficiencies (PCEs), extending their lifetime under long-term operation is also increasingly important. To address this issue, in this study, a new pseudo-quaternary blend composed of conjugated block copolymer donors and acceptors, PM6-b-TT:b-PYT, is introduced as the active layer for all-PSCs. Compared to the all-PSC based on the traditional binary blend, PM6:BTTP-T, those based on pseudo-quaternary active layer exhibited significantly improved thermal stability after thermal annealing under harsh conditions of 150 °C in an ambient atmosphere. More importantly, to elucidate the morphological stability of the pseudo-quaternary active layer, visible evidence of the thin film's surface and internal structure is carefully investigated by multiple advanced techniques. After extended thermal stress at 150 °C, the binary bulk heterojunction (BHJ) films exhibit excessive polymer chain aggregation, phase separation of the polymers, and increased surface roughness, forming bulk charge traps and increasing the exciton recombination. Meanwhile, the pseudo-quaternary BHJ films maintain the crystallinity and nanostructure of the active layer, improving the stability of the all-PSCs. Overall, this study provides a detailed understanding of the long-term stability of high-efficiency all-PSCs, offering key insights into the polymer section and proposing promising polymer structures for the long-term stability of all-PSCs.
- 8 December 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (50) , 58663-58672
Stretchable Semiconducting Polymers with Hydrogen-Bonding-Capable Conjugation Breakers: Synthesis and Application in Organic Thin-Film Transistors
Diketopyrrolopyrrole (DPP)-based conjugated copolymers are important organic semiconductors for applications in high-efficiency organic thin-film transistors (OTFTs). However, the direct application of these polymers with rigid backbones in stretchable devices has limitations. In this study, we designed and synthesized three kinds of DPPBT-based copolymers, DPPBT-A1, DPPBT-A3, and DPPBT-A5, which have amide-coupled alkylene conjugation breakers capable of hydrogen bonding. Linkers with different segment lengths were copolymerized with DPP and bithiophene (BT) backbone units. A DPP-based copolymer with alternating BT moieties, DPPBT, was synthesized as a reference fully conjugated copolymer. The synthesized polymers with freely rotational backbone linkers have sufficient flexibility to develop ordered phase domains, even in thin films, in comparison to the reference copolymer. However, the introduction of the conjugation breakers, which disconnect the intramolecular π-π overlapping, tends to decrease the hole mobility (μ) from 0.76 to 0.20 cm2 V-1 s-1 in the corresponding OTFT devices. The TFT fabricated using DPPBT-A3 showed a mobility of 0.50 cm2 V-1 s-1, and the mobility value did not show a significant change even when elongated by more than 50%. Therefore, the molecular design strategy of introducing amide-coupled alkylene conjugation breakers into conjugated polymer chains can contribute significantly to the development of high-mobility stretchable conjugated polymers in future.
- 8 December 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (50) , 58663-58672
Stretchable Semiconducting Polymers with Hydrogen-Bonding-Capable Conjugation Breakers: Synthesis and Application in Organic Thin-Film Transistors
Diketopyrrolopyrrole (DPP)-based conjugated copolymers are important organic semiconductors for applications in high-efficiency organic thin-film transistors (OTFTs). However, the direct application of these polymers with rigid backbones in stretchable devices has limitations. In this study, we designed and synthesized three kinds of DPPBT-based copolymers, DPPBT-A1, DPPBT-A3, and DPPBT-A5, which have amide-coupled alkylene conjugation breakers capable of hydrogen bonding. Linkers with different segment lengths were copolymerized with DPP and bithiophene (BT) backbone units. A DPP-based copolymer with alternating BT moieties, DPPBT, was synthesized as a reference fully conjugated copolymer. The synthesized polymers with freely rotational backbone linkers have sufficient flexibility to develop ordered phase domains, even in thin films, in comparison to the reference copolymer. However, the introduction of the conjugation breakers, which disconnect the intramolecular π-π overlapping, tends to decrease the hole mobility (μ) from 0.76 to 0.20 cm2 V-1 s-1 in the corresponding OTFT devices. The TFT fabricated using DPPBT-A3 showed a mobility of 0.50 cm2 V-1 s-1, and the mobility value did not show a significant change even when elongated by more than 50%. Therefore, the molecular design strategy of introducing amide-coupled alkylene conjugation breakers into conjugated polymer chains can contribute significantly to the development of high-mobility stretchable conjugated polymers in future.
- 27 April 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (18) , 22574-22579
Interfacial Capillary Spooling of Conductive Polyurethane–Silver Core–Sheath (PU@Ag) Microfibers for Highly Stretchable Interconnects
Conductive fibers are core materials in textile electronics for the sustainable operation of devices under mechanical stimuli. Conventional polymer-metal core-sheath fibers were employed as stretchable electrical interconnects. However, their electrical conductivity is severely degraded by the rupture of metal sheaths at low strains. Because the core-sheath fibers are not intrinsically stretchable, designing a stretchable architecture of interconnects based on the fibers is essential. Herein, we introduce nonvolatile droplet-conductive microfiber arrays as stretchable interconnects by employing interfacial capillary spooling, motivated by the reversible spooling of capture threads in a spider web. Polyurethane (PU)-Ag core-sheath (PU@Ag) fibers were prepared by wet-spinning and thermal evaporation. When the fiber was placed on a silicone droplet, a capillary force was generated at their interface. The highly soft PU@Ag fibers were fully spooled within the droplet and reversibly uncoiled when a tensile force was applied. Without mechanical failures of the Ag sheaths, an excellent conductivity of 3.9 × 104 S cm-1 was retained at a strain of 1200% for 1000 spooling-uncoiling cycles. A light-emitting diode connected to a multiarray of droplet-PU@Ag fibers exhibited stable operation during spooling-uncoiling cycles.
- 27 April 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (18) , 22574-22579
Interfacial Capillary Spooling of Conductive Polyurethane–Silver Core–Sheath (PU@Ag) Microfibers for Highly Stretchable Interconnects
Conductive fibers are core materials in textile electronics for the sustainable operation of devices under mechanical stimuli. Conventional polymer-metal core-sheath fibers were employed as stretchable electrical interconnects. However, their electrical conductivity is severely degraded by the rupture of metal sheaths at low strains. Because the core-sheath fibers are not intrinsically stretchable, designing a stretchable architecture of interconnects based on the fibers is essential. Herein, we introduce nonvolatile droplet-conductive microfiber arrays as stretchable interconnects by employing interfacial capillary spooling, motivated by the reversible spooling of capture threads in a spider web. Polyurethane (PU)-Ag core-sheath (PU@Ag) fibers were prepared by wet-spinning and thermal evaporation. When the fiber was placed on a silicone droplet, a capillary force was generated at their interface. The highly soft PU@Ag fibers were fully spooled within the droplet and reversibly uncoiled when a tensile force was applied. Without mechanical failures of the Ag sheaths, an excellent conductivity of 3.9 × 104 S cm-1 was retained at a strain of 1200% for 1000 spooling-uncoiling cycles. A light-emitting diode connected to a multiarray of droplet-PU@Ag fibers exhibited stable operation during spooling-uncoiling cycles.