MRMarco Redolfi

Marco Redolfi

*This is an algorithmically generated author record based on publicly available information.

Marco Redolfi has a total of 29 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Grain Size Sorting and Steady Bars Formation in Straight Channels—Part 2: Linear Theory

    by Niccolò Ragno, Marco Redolfi

    This is the second of two papers aimed to investigate grain sorting patterns associated with the formation of steady alternate bars in gravel‐bed rivers. Part 1 presented the analysis of a series of tailored experiments, performed in a mobile bed laboratory flume with fixed, straight banks. The results showed that a consistent pattern of grain size distribution emerges in conjunction with the bed topography upon reaching the final equilibrium configuration, nearly independent of the flow discharge and channel width. In this second part, a two‐dimensional morphodynamic model is formulated to interpret the experimental observations. The model is solved through a linear analysis, which allows the description of the spatial structure of the flow field, channel bed, and bed surface texture at equilibrium. The model accurately reproduces the sorting pattern associated with bar development, as it captures the gradual coarsening upstream of the bar head and finer particles accumulating on the lee side. The sorting pattern is governed by the balance between the selective transport of sediment grains in the streamwise direction and the gravitational effect due to lateral bed slope. The model's outcomes crucially depend on the formulation adopted to describe the effect of lateral bed slope on the direction of sediment transport. Specifically, the good agreement between theory and laboratory data is verified when the effect of lateral hiding on particle direction is neglected. The results suggest the need for a general formulation, supported by dedicated laboratory and numerical experiments, to better understand grain mechanics on arbitrarily sloping beds.


  • Open Access

    Grain Size Sorting and Steady Bars Formation in Straight Channels—Part 1: Laboratory Experiments

    by Marco Redolfi, Niccolò Ragno, Matilde Welber, Walter Bertoldi

    Surface grain size in gravel‐bed rivers is inherently heterogeneous, with marked spatial variability that remains challenging to predict, even in the presence of regular bedforms. This study investigates surface grain size variability on self‐formed alternate bars at the scale of a single bar unit, and is divided in two parts. In Part 1, controlled laboratory experiments were conducted in a straight flume with fixed banks under steady water discharge and sediment supply conditions. High‐resolution maps of bed topography and surface grain size were created using close‐range photogrammetry and automated image analysis, while numerical simulations provided estimates of the flow field and bed shear stress distribution. Experiments show the formation of initially migrating bars, which gradually slow down, eventually leading to a steady configuration. Analysis of this equilibrium state reveals recurring periodic patterns in bed topography, shear stress, and grain size. Coarser sediment patches predominantly occur on the stoss side, upstream of the bar crest, while finer sediments concentrate near the bar front, upstream of pools. Grain size distribution is not directly correlated with bed elevation or bed shear stress but displays a systematic upstream shift with a consistent phase lag across all experiments. These patterns were unaffected by changes in discharge or channel width. Moreover, our analysis shows that the flow deflection induced by bars limits sediment transport on bar tops, which explains the lack of migration and the relatively long bar wavelength. In Part 2, a theoretical model is formulated to provide a mechanistic interpretation of the experimental results.


  • Open Access

    A physically-based estimation of the length parameter in river bifurcation models

    by Marco Redolfi

    The morphological trajectory of river bifurcations is commonly investigated through one-dimensional models. In this approach, the two-dimensional topographic effects exerted by the bifurcation are simply accounted for by a nodal point relation, which quantifies the amount of sediment that is transported towards each downstream branch. The most widely-adopted nodal point relation is based on considering two computational cells located just upstream the bifurcation node, which laterally exchange water and sediments. The results of this approach strongly depend on a dimensionless parameter that represents the ratio between the bifurcation cell length and the main channel width, whose value needs to be empirically estimated. An interesting possibility is the calibration of this parameter on the basis of the analysis of existing two-dimensional linear models, which directly solve the momentum and mass conservation equations. Following this idea, I demonstrate that a full consistency between the one-dimensional approach and the two-dimensional models can be directly achieved by adopting different scaling for the bifurcation cell length, which results in a theoretically-defined and constant dimensionless cell length parameter. Comparison with experimental observations reveals that this physically-based scaling yields more accurate predictions of bifurcation stability and discharge asymmetry. This constitutes a starting point for incorporating other factors that are typically observed in natural settings, such as flow variability and non-trivial plainform configuration. In conclusion, this work provides a physically-based method for parameterizing one-dimensional bifurcation models, easily incorporable in existing models of braided networks, channel deltas or individual channel loops.

  • Open Access

    Analysis of autogenic bifurcation processes resulting in river avulsion

    by Gabriele Barile, Marco Redolfi, Marco Tubino

    River bifurcations are constituent components of multi-thread fluvial systems, playing a crucial role in their morphodynamic evolution and the partitioning of water and sediment. Although many studies have been directed at exploring bifurcation dynamics, the conditions under which avulsions occur, resulting in the complete abandonment of one branch, are still not well understood. To address this knowledge gap, we develop a novel 1D numerical model based on existing nodal point relations for sediment partitioning, which allows for the simulation of the morphodynamic evolution of a free bifurcation. Model results show that when the discharge asymmetry is so high that the shoaling branch does not transport sediments (partial avulsion conditions) the dominant branch undergoes significant degradation, leading to a higher inlet step between the bifurcates and further amplifying the discharge asymmetry. The degree of asymmetry is found to increase with the length of the downstream channels to the point that when they are sufficiently long, the shoaling branch is completely abandoned (full avulsion conditions). To complement our numerical findings, we also formulate a new analytical model that is able to reproduce the essential characteristics of the partial avulsion equilibrium, which enables us to identify the key parameters that control the transition between different configurations. In summary, this research sheds light on the fundamental processes that drive avulsion through the abandonment of river bifurcations. The insights gained from this study provide a foundation for further investigations and may offer valuable information for the design of sustainable river restoration projects.


  • Open Access

    Reply on RC2

    by Gabriele Barile, Marco Redolfi, Marco Tubino

    River bifurcations are constituent components of multi-thread fluvial systems, playing a crucial role in their morphodynamic evolution and the partitioning of water and sediment. Although many studies have been directed at exploring bifurcation dynamics, the conditions under which avulsions occur, resulting in the complete abandonment of one branch, are still not well understood. To address this knowledge gap, we develop a novel 1D numerical model, based on existing nodal point relations for sediment partitioning, which allows for the simulation of the morphodynamic evolution of a free bifurcation. Model results show that when the discharge asymmetry is so high that the shoaling branch does not transport sediments (partial avulsion conditions) the dominant branch undergoes significant degradation, leading to a higher inlet step between the bifurcates and further amplifying the discharge asymmetry. The degree of asymmetry is found to increase with the length of the downstream channels, to the point that when they are sufficiently long, the shoaling branch is completely abandoned (full avulsion conditions). To complement our numerical findings, we also formulate a new analytical model that is able to reproduce the essential characteristics of the partial avulsion equilibrium, which enables us to identify the key parameters that control the transition between different configurations. In summary, this research sheds light on the fundamental processes that drive avulsion through the abandonment of river bifurcations. The insights gained from this study provide a foundation for further investigations and may offer valuable information for the design of sustainable river restoration projects.

  • Open Access

    Reply on RC1

    by Gabriele Barile, Marco Redolfi, Marco Tubino

    River bifurcations are constituent components of multi-thread fluvial systems, playing a crucial role in their morphodynamic evolution and the partitioning of water and sediment. Although many studies have been directed at exploring bifurcation dynamics, the conditions under which avulsions occur, resulting in the complete abandonment of one branch, are still not well understood. To address this knowledge gap, we develop a novel 1D numerical model, based on existing nodal point relations for sediment partitioning, which allows for the simulation of the morphodynamic evolution of a free bifurcation. Model results show that when the discharge asymmetry is so high that the shoaling branch does not transport sediments (partial avulsion conditions) the dominant branch undergoes significant degradation, leading to a higher inlet step between the bifurcates and further amplifying the discharge asymmetry. The degree of asymmetry is found to increase with the length of the downstream channels, to the point that when they are sufficiently long, the shoaling branch is completely abandoned (full avulsion conditions). To complement our numerical findings, we also formulate a new analytical model that is able to reproduce the essential characteristics of the partial avulsion equilibrium, which enables us to identify the key parameters that control the transition between different configurations. In summary, this research sheds light on the fundamental processes that drive avulsion through the abandonment of river bifurcations. The insights gained from this study provide a foundation for further investigations and may offer valuable information for the design of sustainable river restoration projects.

  • Open Access

    Modeling Steady Grain Sorting in River Bifurcations

    by Niccolò Ragno, Marco Redolfi, Nicoletta Tambroni, Marco Tubino

    A striking feature of rivers is their ability to sort the sediments composing them. One of the chief causes for grain sorting consists in the selective transport of different sizes moving downstream. This process can be substantially influenced by the presence of lateral topographic variations, as those produced by channel bifurcations, in which water and sediment are diverted between two smaller anabranches. In particular, field and laboratory observations have shown that the asymmetric flux distribution commonly observed in actual bifurcations is associated with a coarsening of the most‐carrying branch. Here, equilibrium sorting in river bifurcations is addressed through a quasi‐2D model. Differently from previous works, a fully physically based description of the processes tied to a heterogeneous sediment mixture is introduced. The main mechanisms consist in the lateral pull of sediment due to a sloping bed upstream the bifurcation, and the variation of transport capacity in downstream branches. The model indicates that grain sorting tends to reduce the degree of flux asymmetry between branches for increasing heterogeneity of the mixture. Moreover, the uneven discharge distribution is associated with a different bed surface composition, with bed coarsening of the dominating channel and fining of the other branch. The reduced sediment transport asymmetry and bed surface fining enhance the transport of fine material in the less‐carrying branch, thus contributing to keep it morphologically active. Finally, the model predicts an overall fining of bed surface material with respect to the feeder channel.


  • Open Access

    Defining the length parameter in river bifurcation models: a theoretical approach

    by Marco Redolfi

    Summary: One‐dimensional models for river bifurcations rely on a nodal point relation that determines the distribution of sediments between the downstream branches. The most widely‐adopted nodal point relation describes the two‐dimensional topographic effects exerted by the bifurcation by introducing two computational cells, located just upstream the bifurcation node, that laterally exchange water and sediments. The results of this approach strongly depend on a dimensionless parameter that represents the ratio between the cell length and the main channel width, whose value needs to be empirically estimated. Previous works proposed calibrating this parameter on the basis of more complete two‐dimensional linear models, which directly solve the momentum and mass conservation equations. This study demonstrates that a full consistency between the one‐dimensional approach and the two‐dimensional models can be directly achieved by adopting different scaling for the bifurcation cell length, which results in a theoretically‐defined and constant dimensionless length parameter. Comparison with experimental observations reveals that this physically‐based scaling yields more accurate predictions of bifurcation stability and discharge asymmetry. This indicates that the proposed method may provide a more reliable and precise estimation of the cell length, potentially improving the performance of one‐dimensional models for bifurcation processes in rivers.


  • Open Access

    Analysis of autogenic bifurcation processes resulting in river avulsion

    by Gabriele Barile, Marco Redolfi, Marco Tubino

    River bifurcations are constituent components of multi-thread fluvial systems, playing a crucial role in their morphodynamic evolution and the partitioning of water and sediment. Although many studies have been directed at exploring bifurcation dynamics, the conditions under which avulsions occur, resulting in the complete abandonment of one branch, are still not well understood. To address this knowledge gap, we develop a novel 1D numerical model, based on existing nodal point relations for sediment partitioning, which allows for the simulation of the morphodynamic evolution of a free bifurcation. Model results show that when the discharge asymmetry is so high that the shoaling branch does not transport sediments (partial avulsion conditions) the dominant branch undergoes significant degradation, leading to a higher inlet step between the bifurcates and further amplifying the discharge asymmetry. The degree of asymmetry is found to increase with the length of the downstream channels, to the point that when they are sufficiently long, the shoaling branch is completely abandoned (full avulsion conditions). To complement our numerical findings, we also formulate a new analytical model that is able to reproduce the essential characteristics of the partial avulsion equilibrium, which enables us to identify the key parameters that control the transition between different configurations. In summary, this research sheds light on the fundamental processes that drive avulsion through the abandonment of river bifurcations. The insights gained from this study provide a foundation for further investigations and may offer valuable information for the design of sustainable river restoration projects.

  • Open Access

    Evaluating sediment (dis)connectivity in a study Alpine catchment

    by Ludovico Agostini, Gabriele Barile, Riccardo Bonanomi, Michele Combatti, Marco Fezzi, Marco Redolfi, Livia Serrao, Elisabeth Slomp, Guido Zolezzi, Nadia Zorzi, et al.

    The construction of artificial reservoirs for hydropower production strongly alters sediment connectivity, which often produces significant impacts on the river reaches downstream morphology. Assessing sediment connectivity and transport variations is therefore crucial for predicting possible fluvial morphological trajectories and to define scientifically-based management practices in terms of water and sediment releases from Alpine reservoirs. For this reason APRIE, the agency responsible for hydropower regulation in the Trento Province (Italy), is carrying out a project to assess impacts caused by existing hydropower plants, in collaboration with the University of Trento.We focused on the study case of the Travignolo River, a tributary of the Avisio River in the Dolomites. The valley longitudinal connectivity has been completely interrupted by the Forte Buso dam construction in 1953 and by a series of smaller derivations from the main tributaries. We aim at understanding to what extent the presence of the dam affects the overall sediment connectivity, by assessing the relative contribution of sediment sources that currently drain into the lake with respect to the sources that are still connected to the Travignolo River, and by evaluating to what extent the disconnectivity has compromised the morphological equilibrium of the river.To this aim, structural and functional sediment connectivity are analysed through a three step integrated approach, considering connectivity at different spatial scales. First, fluvial morphological trajectories have been studied by investigating a dataset of historical images, which allowed us to identify both morphological changes and vegetation growth. Second, sediment connectivity has been modelled at the hillslope scale through the hydrological index of connectivity calculated by applying the SedInConnect model (Crema, S. & Cavalli, M., 2018, Computational Geosciences) on the basis of terrain elevation data and information on Quaternary deposits. The model allowed us to determine the potential sediment yield contribution from the different subbasins, as well as the position of sediment sources depending on their characteristic grain size. Finally, a quantitative analysis of sediment longitudinal connectivity has been carried on by applying the CASCADE Toolbox model (Tangi, M. et al., 2019, Environmental Modelling & Software) to the main river network of the Travignolo basin. Information on surface and subsurface grain size distribution have been obtained by collecting several samples along the main course of the Travignolo River and along their main tributaries, while channel width was estimated by analysing the high-resolution digital elevation model. To calibrate CASCADE model we have compared the predicted grain size distribution cascades with the measured subsurface composition. Furthermore, we have performed several simulations considering different methods of data spatialization and different choices of the main parameters, to obtain a general assessment of the model uncertainties.Results highlight the potential sediment contributions of different subbasins to the fluvial system, depending on their geological characteristics, slope and distance from the permanent drainage network. Moreover, the analysis of multiple scenarios reveals how sediment transport processes are strongly affected by the dam presence and how they may change depending on water delivery strategies.