Gabriele Barile
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Gabriele Barile has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
Marco Tubino
Department of Civil, Environmental and Mechanical Engineering University of Trento Trento Italy
7 shared publications- Marco Redolfi
Department of Engineering “Enzo Ferrari” University of Modena and Reggio Emilia Modena Italy
6 shared publications - Marco Tubino
Department of Civil, Environmental, and Mechanical Engineering University of Trento Trento Italy
2 shared publications - Paola Passalacqua
Institute of Environmental Engineering, Department of Civil, Environmental and Geomatic Engineering, ETH Zürich, Zürich, CH
2 shared publications - Siyoon Kwon
Gyeongsang National University
2 shared publications Elisabeth Slomp
1 shared publication
Latest Publications
- Open Access
- 23 September 2025
- Published by Wiley in Earth Surface Processes and Landforms
- Vol. 50 (12)
Time scales of river bifurcations
River bifurcations are the fundamental building blocks of a variety of fluvial environments such as braiding and anastomosed rivers, alluvial fans, and river deltas. Their long‐term equilibrium configurations have been widely explored, together with the influence of several external forcing factors, whereas less attention has been devoted to investigate the characteristic timescale with which bifurcations evolve over time. In this work, we address this issue by combining the results of a 1‐D numerical model with those obtained through a linear stability analysis that accounts for the length of bifurcates. Numerical results show that the timescale of the adaptation of water and sediment partition at the bifurcation node is much shorter than the time required to achieve the long‐term equilibrium of the bifurcates. We find that the nodal point evolution becomes faster as the value of the width‐to‐depth ratio increases above the critical threshold for the bifurcation stability, while it gets slower as the length of the bifurcates increases. The timescale becomes independent of the branch length when this length exceeds a threshold value above which the effect of the downstream boundary condition no longer affects the evolution of the bifurcation node. The analysis of a large dataset of gravel‐bed bifurcations reveals that the evolutionary timescale of most of them is larger than that of natural flow variations. Moreover, the rate at which the water and sediment partitioning at bifurcations changes over time is generally smaller than the fluctuation rate of sediment transport caused by the migration of bars in the upstream channel, especially for bifurcations with long branches.
- 23 September 2025
- Published by Wiley in Earth Surface Processes and Landforms
- Vol. 50 (12)
Open AccessTime scales of river bifurcations
River bifurcations are the fundamental building blocks of a variety of fluvial environments such as braiding and anastomosed rivers, alluvial fans, and river deltas. Their long‐term equilibrium configurations have been widely explored, together with the influence of several external forcing factors, whereas less attention has been devoted to investigate the characteristic timescale with which bifurcations evolve over time. In this work, we address this issue by combining the results of a 1‐D numerical model with those obtained through a linear stability analysis that accounts for the length of bifurcates. Numerical results show that the timescale of the adaptation of water and sediment partition at the bifurcation node is much shorter than the time required to achieve the long‐term equilibrium of the bifurcates. We find that the nodal point evolution becomes faster as the value of the width‐to‐depth ratio increases above the critical threshold for the bifurcation stability, while it gets slower as the length of the bifurcates increases. The timescale becomes independent of the branch length when this length exceeds a threshold value above which the effect of the downstream boundary condition no longer affects the evolution of the bifurcation node. The analysis of a large dataset of gravel‐bed bifurcations reveals that the evolutionary timescale of most of them is larger than that of natural flow variations. Moreover, the rate at which the water and sediment partitioning at bifurcations changes over time is generally smaller than the fluctuation rate of sediment transport caused by the migration of bars in the upstream channel, especially for bifurcations with long branches.
- Open Access
- 9 July 2025
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Earth Surface
- Vol. 130 (7)
Controlling Factors on Water and Sediment Partitioning at Deltaic Bifurcations
Bifurcations in river‐dominated deltas are the main actors in the routing of water and sediments throughout the fluvial network. In spite of previous acknowledgments of their importance, we still lack a comprehensive framework on how bifurcation geometry affects water and sediment partitioning. To investigate this issue, we first combine previously calibrated 2D hydrodynamic simulations on the Wax Lake Delta with a Lagrangian particle‐tracking model, quantifying the partitioning of water and sediments with different buoyancy at five bifurcations and their correlations with differences in channel width, branching angle and inlet bed elevation between the downstream branches. We compare the sediment partitioning at bifurcations with available field data to validate our methodology. We then employ the same modeling tools on a simplified geometry, whose geometrical and hydraulic features resemble those of the bifurcations in the Wax Lake Delta. Model results show that the branching angle does not affect the partitioning of water and sediments. The combined effect of asymmetries in the channel width and inlet bed elevation is captured by a simple linear formula that accurately estimates the partitioning of water at bifurcations returned by the 2D calibrated hydrodynamic simulations. Our results also highlight the key role played by transverse gradients in the bathymetry of the upstream channel in determining the partitioning of sediments, suggesting that deeper portions of the cross‐section of the upstream channel can cause a proportionately larger fraction of sediments with a larger Rouse number to be routed toward the corresponding bifurcate.
- 9 July 2025
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Earth Surface
- Vol. 130 (7)
Open AccessControlling Factors on Water and Sediment Partitioning at Deltaic Bifurcations
Bifurcations in river‐dominated deltas are the main actors in the routing of water and sediments throughout the fluvial network. In spite of previous acknowledgments of their importance, we still lack a comprehensive framework on how bifurcation geometry affects water and sediment partitioning. To investigate this issue, we first combine previously calibrated 2D hydrodynamic simulations on the Wax Lake Delta with a Lagrangian particle‐tracking model, quantifying the partitioning of water and sediments with different buoyancy at five bifurcations and their correlations with differences in channel width, branching angle and inlet bed elevation between the downstream branches. We compare the sediment partitioning at bifurcations with available field data to validate our methodology. We then employ the same modeling tools on a simplified geometry, whose geometrical and hydraulic features resemble those of the bifurcations in the Wax Lake Delta. Model results show that the branching angle does not affect the partitioning of water and sediments. The combined effect of asymmetries in the channel width and inlet bed elevation is captured by a simple linear formula that accurately estimates the partitioning of water at bifurcations returned by the 2D calibrated hydrodynamic simulations. Our results also highlight the key role played by transverse gradients in the bathymetry of the upstream channel in determining the partitioning of sediments, suggesting that deeper portions of the cross‐section of the upstream channel can cause a proportionately larger fraction of sediments with a larger Rouse number to be routed toward the corresponding bifurcate.
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
Controlling factors on sediment partitioning at deltaic bifurcations: a mixed Eulerian-Lagrangian modelling approach
Sediment partitioning at river bifurcations plays a crucial role in determining the morphological evolution of river deltas. However, we still lack a comprehensive understanding of the controlling factors that determine how sediments are partitioned at bifurcations, especially for suspended-load dominated systems such as river deltas. We employed dorado, a Lagrangian reduced-complexity particle tracking model, and a 2D shallow-water hydrodynamic model to investigate this gap. First, we routed sediment particles on calibrated hydrodynamic simulations performed for the Wax Lake Delta. The resulting asymmetries in the sediment partitioning at bifurcations showed good agreement with available field data on sediment concentration and observations of the spatial distribution of sand deposits in the different delta branches. To better interpret our results and extend them to similar deltaic contexts, we developed a simplified model of deltaic bifurcation and analyzed the possible controlling factors on sediment partitioning. We show how different planform controls influence sediment partitioning at the bifurcation node, including channel width, bifurcation angle, and bed elevation differences between the anabranches. Our analysis helps understand preferential pathways for sediment transport in river deltas, with noteworthy implications for delta management.
- 20 January 2025
- Published by Copernicus GmbH
Open AccessControlling factors on sediment partitioning at deltaic bifurcations: a mixed Eulerian-Lagrangian modelling approach
Sediment partitioning at river bifurcations plays a crucial role in determining the morphological evolution of river deltas. However, we still lack a comprehensive understanding of the controlling factors that determine how sediments are partitioned at bifurcations, especially for suspended-load dominated systems such as river deltas. We employed dorado, a Lagrangian reduced-complexity particle tracking model, and a 2D shallow-water hydrodynamic model to investigate this gap. First, we routed sediment particles on calibrated hydrodynamic simulations performed for the Wax Lake Delta. The resulting asymmetries in the sediment partitioning at bifurcations showed good agreement with available field data on sediment concentration and observations of the spatial distribution of sand deposits in the different delta branches. To better interpret our results and extend them to similar deltaic contexts, we developed a simplified model of deltaic bifurcation and analyzed the possible controlling factors on sediment partitioning. We show how different planform controls influence sediment partitioning at the bifurcation node, including channel width, bifurcation angle, and bed elevation differences between the anabranches. Our analysis helps understand preferential pathways for sediment transport in river deltas, with noteworthy implications for delta management.
- Open Access
- 14 November 2024
- Published by Wiley
Controlling factors on water and sediment partitioning at deltaic bifurcations
Bifurcations in river-dominated deltas are the main actors in the routing of water and sediments throughout the fluvial network. In spite of previous acknowledgments of their importance, we still lack a comprehensive framework on how bifurcation geometry affects the water and sediment partitioning. To investigate this issue, we firstly combine previously calibrated 2D hydrodynamic simulations on the Wax Lake Delta with a Lagrangian particle-tracking model, quantifying the partitioning of water and sediments with different buoyancy at five bifurcations and their correlations with differences in channel width, branching angle and inlet bed elevation between the downstream branches. We compare the sediment partitioning at bifurcations with available field data to validate our methodology. We then employ the same modeling tools on a simplified geometry, whose geometrical and hydraulic features resemble those of the bifurcations in the Wax Lake Delta. Model results show that the branching angle does not affect the partitioning of water and sediments. The combined effect of asymmetries in the channel width and inlet bed elevation is captured by a simple linear formula that accurately estimates the partitioning of water at bifurcations returned by the 2D calibrated hydrodynamic simulations. Our results also highlight the key role played by transverse gradients in the bathymetry of the upstream channel in determining the partitioning of sediments, suggesting that deeper portions of the cross-section of the upstream channel can cause a proportionately larger fraction of sediments with larger Rouse number to be routed towards the corresponding bifurcate.
- 14 November 2024
- Published by Wiley
Open AccessControlling factors on water and sediment partitioning at deltaic bifurcations
Bifurcations in river-dominated deltas are the main actors in the routing of water and sediments throughout the fluvial network. In spite of previous acknowledgments of their importance, we still lack a comprehensive framework on how bifurcation geometry affects the water and sediment partitioning. To investigate this issue, we firstly combine previously calibrated 2D hydrodynamic simulations on the Wax Lake Delta with a Lagrangian particle-tracking model, quantifying the partitioning of water and sediments with different buoyancy at five bifurcations and their correlations with differences in channel width, branching angle and inlet bed elevation between the downstream branches. We compare the sediment partitioning at bifurcations with available field data to validate our methodology. We then employ the same modeling tools on a simplified geometry, whose geometrical and hydraulic features resemble those of the bifurcations in the Wax Lake Delta. Model results show that the branching angle does not affect the partitioning of water and sediments. The combined effect of asymmetries in the channel width and inlet bed elevation is captured by a simple linear formula that accurately estimates the partitioning of water at bifurcations returned by the 2D calibrated hydrodynamic simulations. Our results also highlight the key role played by transverse gradients in the bathymetry of the upstream channel in determining the partitioning of sediments, suggesting that deeper portions of the cross-section of the upstream channel can cause a proportionately larger fraction of sediments with larger Rouse number to be routed towards the corresponding bifurcate.
- Open Access
- 9 January 2024
- Published by Copernicus GmbH in Earth Surface Dynamics
- Vol. 12 (1) , 87-103
Analysis of autogenic bifurcation processes resulting in river avulsion
River bifurcations are constituent components of multi-thread fluvial systems, playing a crucial role in their morphodynamic evolution and the partitioning of water and sediment. Although many studies have been directed at exploring bifurcation dynamics, the conditions under which avulsions occur, resulting in the complete abandonment of one branch, are still not well understood. To address this knowledge gap, we develop a novel 1D numerical model based on existing nodal point relations for sediment partitioning, which allows for the simulation of the morphodynamic evolution of a free bifurcation. Model results show that when the discharge asymmetry is so high that the shoaling branch does not transport sediments (partial avulsion conditions) the dominant branch undergoes significant degradation, leading to a higher inlet step between the bifurcates and further amplifying the discharge asymmetry. The degree of asymmetry is found to increase with the length of the downstream channels to the point that when they are sufficiently long, the shoaling branch is completely abandoned (full avulsion conditions). To complement our numerical findings, we also formulate a new analytical model that is able to reproduce the essential characteristics of the partial avulsion equilibrium, which enables us to identify the key parameters that control the transition between different configurations. In summary, this research sheds light on the fundamental processes that drive avulsion through the abandonment of river bifurcations. The insights gained from this study provide a foundation for further investigations and may offer valuable information for the design of sustainable river restoration projects.
- 9 January 2024
- Published by Copernicus GmbH in Earth Surface Dynamics
- Vol. 12 (1) , 87-103
Open AccessAnalysis of autogenic bifurcation processes resulting in river avulsion
River bifurcations are constituent components of multi-thread fluvial systems, playing a crucial role in their morphodynamic evolution and the partitioning of water and sediment. Although many studies have been directed at exploring bifurcation dynamics, the conditions under which avulsions occur, resulting in the complete abandonment of one branch, are still not well understood. To address this knowledge gap, we develop a novel 1D numerical model based on existing nodal point relations for sediment partitioning, which allows for the simulation of the morphodynamic evolution of a free bifurcation. Model results show that when the discharge asymmetry is so high that the shoaling branch does not transport sediments (partial avulsion conditions) the dominant branch undergoes significant degradation, leading to a higher inlet step between the bifurcates and further amplifying the discharge asymmetry. The degree of asymmetry is found to increase with the length of the downstream channels to the point that when they are sufficiently long, the shoaling branch is completely abandoned (full avulsion conditions). To complement our numerical findings, we also formulate a new analytical model that is able to reproduce the essential characteristics of the partial avulsion equilibrium, which enables us to identify the key parameters that control the transition between different configurations. In summary, this research sheds light on the fundamental processes that drive avulsion through the abandonment of river bifurcations. The insights gained from this study provide a foundation for further investigations and may offer valuable information for the design of sustainable river restoration projects.
- Open Access
- 26 October 2023
- Published by Copernicus GmbH
- Vol. 2023, 1-26
Reply on RC2
River bifurcations are constituent components of multi-thread fluvial systems, playing a crucial role in their morphodynamic evolution and the partitioning of water and sediment. Although many studies have been directed at exploring bifurcation dynamics, the conditions under which avulsions occur, resulting in the complete abandonment of one branch, are still not well understood. To address this knowledge gap, we develop a novel 1D numerical model, based on existing nodal point relations for sediment partitioning, which allows for the simulation of the morphodynamic evolution of a free bifurcation. Model results show that when the discharge asymmetry is so high that the shoaling branch does not transport sediments (partial avulsion conditions) the dominant branch undergoes significant degradation, leading to a higher inlet step between the bifurcates and further amplifying the discharge asymmetry. The degree of asymmetry is found to increase with the length of the downstream channels, to the point that when they are sufficiently long, the shoaling branch is completely abandoned (full avulsion conditions). To complement our numerical findings, we also formulate a new analytical model that is able to reproduce the essential characteristics of the partial avulsion equilibrium, which enables us to identify the key parameters that control the transition between different configurations. In summary, this research sheds light on the fundamental processes that drive avulsion through the abandonment of river bifurcations. The insights gained from this study provide a foundation for further investigations and may offer valuable information for the design of sustainable river restoration projects.
- 26 October 2023
- Published by Copernicus GmbH
- Vol. 2023, 1-26
Open AccessReply on RC2
River bifurcations are constituent components of multi-thread fluvial systems, playing a crucial role in their morphodynamic evolution and the partitioning of water and sediment. Although many studies have been directed at exploring bifurcation dynamics, the conditions under which avulsions occur, resulting in the complete abandonment of one branch, are still not well understood. To address this knowledge gap, we develop a novel 1D numerical model, based on existing nodal point relations for sediment partitioning, which allows for the simulation of the morphodynamic evolution of a free bifurcation. Model results show that when the discharge asymmetry is so high that the shoaling branch does not transport sediments (partial avulsion conditions) the dominant branch undergoes significant degradation, leading to a higher inlet step between the bifurcates and further amplifying the discharge asymmetry. The degree of asymmetry is found to increase with the length of the downstream channels, to the point that when they are sufficiently long, the shoaling branch is completely abandoned (full avulsion conditions). To complement our numerical findings, we also formulate a new analytical model that is able to reproduce the essential characteristics of the partial avulsion equilibrium, which enables us to identify the key parameters that control the transition between different configurations. In summary, this research sheds light on the fundamental processes that drive avulsion through the abandonment of river bifurcations. The insights gained from this study provide a foundation for further investigations and may offer valuable information for the design of sustainable river restoration projects.
- Open Access
- 26 October 2023
- Published by Copernicus GmbH
- Vol. 2023, 1-26
Reply on RC1
River bifurcations are constituent components of multi-thread fluvial systems, playing a crucial role in their morphodynamic evolution and the partitioning of water and sediment. Although many studies have been directed at exploring bifurcation dynamics, the conditions under which avulsions occur, resulting in the complete abandonment of one branch, are still not well understood. To address this knowledge gap, we develop a novel 1D numerical model, based on existing nodal point relations for sediment partitioning, which allows for the simulation of the morphodynamic evolution of a free bifurcation. Model results show that when the discharge asymmetry is so high that the shoaling branch does not transport sediments (partial avulsion conditions) the dominant branch undergoes significant degradation, leading to a higher inlet step between the bifurcates and further amplifying the discharge asymmetry. The degree of asymmetry is found to increase with the length of the downstream channels, to the point that when they are sufficiently long, the shoaling branch is completely abandoned (full avulsion conditions). To complement our numerical findings, we also formulate a new analytical model that is able to reproduce the essential characteristics of the partial avulsion equilibrium, which enables us to identify the key parameters that control the transition between different configurations. In summary, this research sheds light on the fundamental processes that drive avulsion through the abandonment of river bifurcations. The insights gained from this study provide a foundation for further investigations and may offer valuable information for the design of sustainable river restoration projects.
- 26 October 2023
- Published by Copernicus GmbH
- Vol. 2023, 1-26
Open AccessReply on RC1
River bifurcations are constituent components of multi-thread fluvial systems, playing a crucial role in their morphodynamic evolution and the partitioning of water and sediment. Although many studies have been directed at exploring bifurcation dynamics, the conditions under which avulsions occur, resulting in the complete abandonment of one branch, are still not well understood. To address this knowledge gap, we develop a novel 1D numerical model, based on existing nodal point relations for sediment partitioning, which allows for the simulation of the morphodynamic evolution of a free bifurcation. Model results show that when the discharge asymmetry is so high that the shoaling branch does not transport sediments (partial avulsion conditions) the dominant branch undergoes significant degradation, leading to a higher inlet step between the bifurcates and further amplifying the discharge asymmetry. The degree of asymmetry is found to increase with the length of the downstream channels, to the point that when they are sufficiently long, the shoaling branch is completely abandoned (full avulsion conditions). To complement our numerical findings, we also formulate a new analytical model that is able to reproduce the essential characteristics of the partial avulsion equilibrium, which enables us to identify the key parameters that control the transition between different configurations. In summary, this research sheds light on the fundamental processes that drive avulsion through the abandonment of river bifurcations. The insights gained from this study provide a foundation for further investigations and may offer valuable information for the design of sustainable river restoration projects.
- Open Access
- 23 August 2023
- Published by Copernicus GmbH in EGUsphere
- Vol. 2023, 1-26
Analysis of autogenic bifurcation processes resulting in river avulsion
River bifurcations are constituent components of multi-thread fluvial systems, playing a crucial role in their morphodynamic evolution and the partitioning of water and sediment. Although many studies have been directed at exploring bifurcation dynamics, the conditions under which avulsions occur, resulting in the complete abandonment of one branch, are still not well understood. To address this knowledge gap, we develop a novel 1D numerical model, based on existing nodal point relations for sediment partitioning, which allows for the simulation of the morphodynamic evolution of a free bifurcation. Model results show that when the discharge asymmetry is so high that the shoaling branch does not transport sediments (partial avulsion conditions) the dominant branch undergoes significant degradation, leading to a higher inlet step between the bifurcates and further amplifying the discharge asymmetry. The degree of asymmetry is found to increase with the length of the downstream channels, to the point that when they are sufficiently long, the shoaling branch is completely abandoned (full avulsion conditions). To complement our numerical findings, we also formulate a new analytical model that is able to reproduce the essential characteristics of the partial avulsion equilibrium, which enables us to identify the key parameters that control the transition between different configurations. In summary, this research sheds light on the fundamental processes that drive avulsion through the abandonment of river bifurcations. The insights gained from this study provide a foundation for further investigations and may offer valuable information for the design of sustainable river restoration projects.
- 23 August 2023
- Published by Copernicus GmbH in EGUsphere
- Vol. 2023, 1-26
Open AccessAnalysis of autogenic bifurcation processes resulting in river avulsion
River bifurcations are constituent components of multi-thread fluvial systems, playing a crucial role in their morphodynamic evolution and the partitioning of water and sediment. Although many studies have been directed at exploring bifurcation dynamics, the conditions under which avulsions occur, resulting in the complete abandonment of one branch, are still not well understood. To address this knowledge gap, we develop a novel 1D numerical model, based on existing nodal point relations for sediment partitioning, which allows for the simulation of the morphodynamic evolution of a free bifurcation. Model results show that when the discharge asymmetry is so high that the shoaling branch does not transport sediments (partial avulsion conditions) the dominant branch undergoes significant degradation, leading to a higher inlet step between the bifurcates and further amplifying the discharge asymmetry. The degree of asymmetry is found to increase with the length of the downstream channels, to the point that when they are sufficiently long, the shoaling branch is completely abandoned (full avulsion conditions). To complement our numerical findings, we also formulate a new analytical model that is able to reproduce the essential characteristics of the partial avulsion equilibrium, which enables us to identify the key parameters that control the transition between different configurations. In summary, this research sheds light on the fundamental processes that drive avulsion through the abandonment of river bifurcations. The insights gained from this study provide a foundation for further investigations and may offer valuable information for the design of sustainable river restoration projects.
- Open Access
- 15 May 2023
- Published by Copernicus GmbH
Evaluating sediment (dis)connectivity in a study Alpine catchment
The construction of artificial reservoirs for hydropower production strongly alters sediment connectivity, which often produces significant impacts on the river reaches downstream morphology. Assessing sediment connectivity and transport variations is therefore crucial for predicting possible fluvial morphological trajectories and to define scientifically-based management practices in terms of water and sediment releases from Alpine reservoirs. For this reason APRIE, the agency responsible for hydropower regulation in the Trento Province (Italy), is carrying out a project to assess impacts caused by existing hydropower plants, in collaboration with the University of Trento.We focused on the study case of the Travignolo River, a tributary of the Avisio River in the Dolomites. The valley longitudinal connectivity has been completely interrupted by the Forte Buso dam construction in 1953 and by a series of smaller derivations from the main tributaries. We aim at understanding to what extent the presence of the dam affects the overall sediment connectivity, by assessing the relative contribution of sediment sources that currently drain into the lake with respect to the sources that are still connected to the Travignolo River, and by evaluating to what extent the disconnectivity has compromised the morphological equilibrium of the river.To this aim, structural and functional sediment connectivity are analysed through a three step integrated approach, considering connectivity at different spatial scales. First, fluvial morphological trajectories have been studied by investigating a dataset of historical images, which allowed us to identify both morphological changes and vegetation growth. Second, sediment connectivity has been modelled at the hillslope scale through the hydrological index of connectivity calculated by applying the SedInConnect model (Crema, S. & Cavalli, M., 2018, Computational Geosciences) on the basis of terrain elevation data and information on Quaternary deposits. The model allowed us to determine the potential sediment yield contribution from the different subbasins, as well as the position of sediment sources depending on their characteristic grain size. Finally, a quantitative analysis of sediment longitudinal connectivity has been carried on by applying the CASCADE Toolbox model (Tangi, M. et al., 2019, Environmental Modelling & Software) to the main river network of the Travignolo basin. Information on surface and subsurface grain size distribution have been obtained by collecting several samples along the main course of the Travignolo River and along their main tributaries, while channel width was estimated by analysing the high-resolution digital elevation model. To calibrate CASCADE model we have compared the predicted grain size distribution cascades with the measured subsurface composition. Furthermore, we have performed several simulations considering different methods of data spatialization and different choices of the main parameters, to obtain a general assessment of the model uncertainties.Results highlight the potential sediment contributions of different subbasins to the fluvial system, depending on their geological characteristics, slope and distance from the permanent drainage network. Moreover, the analysis of multiple scenarios reveals how sediment transport processes are strongly affected by the dam presence and how they may change depending on water delivery strategies.
- 15 May 2023
- Published by Copernicus GmbH
Open AccessEvaluating sediment (dis)connectivity in a study Alpine catchment
The construction of artificial reservoirs for hydropower production strongly alters sediment connectivity, which often produces significant impacts on the river reaches downstream morphology. Assessing sediment connectivity and transport variations is therefore crucial for predicting possible fluvial morphological trajectories and to define scientifically-based management practices in terms of water and sediment releases from Alpine reservoirs. For this reason APRIE, the agency responsible for hydropower regulation in the Trento Province (Italy), is carrying out a project to assess impacts caused by existing hydropower plants, in collaboration with the University of Trento.We focused on the study case of the Travignolo River, a tributary of the Avisio River in the Dolomites. The valley longitudinal connectivity has been completely interrupted by the Forte Buso dam construction in 1953 and by a series of smaller derivations from the main tributaries. We aim at understanding to what extent the presence of the dam affects the overall sediment connectivity, by assessing the relative contribution of sediment sources that currently drain into the lake with respect to the sources that are still connected to the Travignolo River, and by evaluating to what extent the disconnectivity has compromised the morphological equilibrium of the river.To this aim, structural and functional sediment connectivity are analysed through a three step integrated approach, considering connectivity at different spatial scales. First, fluvial morphological trajectories have been studied by investigating a dataset of historical images, which allowed us to identify both morphological changes and vegetation growth. Second, sediment connectivity has been modelled at the hillslope scale through the hydrological index of connectivity calculated by applying the SedInConnect model (Crema, S. & Cavalli, M., 2018, Computational Geosciences) on the basis of terrain elevation data and information on Quaternary deposits. The model allowed us to determine the potential sediment yield contribution from the different subbasins, as well as the position of sediment sources depending on their characteristic grain size. Finally, a quantitative analysis of sediment longitudinal connectivity has been carried on by applying the CASCADE Toolbox model (Tangi, M. et al., 2019, Environmental Modelling & Software) to the main river network of the Travignolo basin. Information on surface and subsurface grain size distribution have been obtained by collecting several samples along the main course of the Travignolo River and along their main tributaries, while channel width was estimated by analysing the high-resolution digital elevation model. To calibrate CASCADE model we have compared the predicted grain size distribution cascades with the measured subsurface composition. Furthermore, we have performed several simulations considering different methods of data spatialization and different choices of the main parameters, to obtain a general assessment of the model uncertainties.Results highlight the potential sediment contributions of different subbasins to the fluvial system, depending on their geological characteristics, slope and distance from the permanent drainage network. Moreover, the analysis of multiple scenarios reveals how sediment transport processes are strongly affected by the dam presence and how they may change depending on water delivery strategies.
- Open Access
- 28 March 2022
- Published by Copernicus GmbH
Exploring river bifurcations response to time-dependent external forcings
River bifurcations play a crucial role in the morphodynamics of multi-thread channel systems such as braiding or anastomosing rivers, deltas and alluvial fans, as they guide the downstream distribution of water and sediment fluxes. Several experimental and theoretical studies have highlighted the unstable character of bifurcations, even in the case of a symmetric planform configuration and steady boundary conditions, which results in a differential erosion/deposition in the downstream channels and leads to equilibrium states where the flow distribution can be highly unbalanced, sometimes causing the complete closure of one of the anabranches. However, the dynamics of natural bifurcations are always influenced by external unsteady forcing factors, such as water discharge variations due to the hydrological regime, changes in downstream water depth (e.g. because of tidal excursions or interactions between discharge variations and local constraints) and the presence of migrating bedforms. The effect of such factors on the bifurcation’s evolutionary process velocity and equilibrium states’ flow balance remains widely unexplored: in this work we seek to address this gap, also focusing on the interplay between the factors’ characteristic timescales and the bifurcation’s “intrinsic” timescale (i.e. the one related to its autogenic instability mechanism). In particular, we investigate the effect of a time-dependent downstream water surface elevation Hd on the behaviour of a simple bifurcation. To this purpose, we model the upstream channel and the two anabranches employing a 1-D shallow-water numerical scheme, coupled with the two-cell nodal point relationship proposed by Bolla Pittaluga et al. (2003) to determine water and sediment partition at the bifurcation node. Starting from a stable, unbalanced equilibrium configuration, we let Hd vary according to linear and sinusoidal functions of time, with the aim of reproducing –in a very simplified fashion– natural phenomena such as backwater effects in braided rivers. Bifurcations response shows a strong dependence on the forcing timescale: specifically, the system reacts accordingly to the ratio between the rate of change of Hd and the bifurcation’s intrinsic timescale. In particular, when the two scales show comparable values, the system behaviour is governed by the competition between the external forcing and the intrinsic dynamic response. Such competition allows the bifurcation to reach a regime configuration, whose water and sediment partitionings differ from the initial conditions: specifically, a steady increase of Hd leads to a more balanced configuration, while a decrease of Hd enhances system asymmetry. On the other hand, when variations of Hd are fast with respect to the intrinsic timescale, the bifurcation response increases in magnitude, often leading to an avulsion. This dual behaviour is closely related to the width-to-depth ratio β; specifically, the rate of change at which avulsion occurs is lower for higher values of β. Ultimately, this modelling framework can be extended to model the unsteady response of fluvial bifurcations to a variety of possible deterministic and stochastic forcing conditions, including hydrological variations of flow discharge.
- 28 March 2022
- Published by Copernicus GmbH
Open AccessExploring river bifurcations response to time-dependent external forcings
River bifurcations play a crucial role in the morphodynamics of multi-thread channel systems such as braiding or anastomosing rivers, deltas and alluvial fans, as they guide the downstream distribution of water and sediment fluxes. Several experimental and theoretical studies have highlighted the unstable character of bifurcations, even in the case of a symmetric planform configuration and steady boundary conditions, which results in a differential erosion/deposition in the downstream channels and leads to equilibrium states where the flow distribution can be highly unbalanced, sometimes causing the complete closure of one of the anabranches. However, the dynamics of natural bifurcations are always influenced by external unsteady forcing factors, such as water discharge variations due to the hydrological regime, changes in downstream water depth (e.g. because of tidal excursions or interactions between discharge variations and local constraints) and the presence of migrating bedforms. The effect of such factors on the bifurcation’s evolutionary process velocity and equilibrium states’ flow balance remains widely unexplored: in this work we seek to address this gap, also focusing on the interplay between the factors’ characteristic timescales and the bifurcation’s “intrinsic” timescale (i.e. the one related to its autogenic instability mechanism). In particular, we investigate the effect of a time-dependent downstream water surface elevation Hd on the behaviour of a simple bifurcation. To this purpose, we model the upstream channel and the two anabranches employing a 1-D shallow-water numerical scheme, coupled with the two-cell nodal point relationship proposed by Bolla Pittaluga et al. (2003) to determine water and sediment partition at the bifurcation node. Starting from a stable, unbalanced equilibrium configuration, we let Hd vary according to linear and sinusoidal functions of time, with the aim of reproducing –in a very simplified fashion– natural phenomena such as backwater effects in braided rivers. Bifurcations response shows a strong dependence on the forcing timescale: specifically, the system reacts accordingly to the ratio between the rate of change of Hd and the bifurcation’s intrinsic timescale. In particular, when the two scales show comparable values, the system behaviour is governed by the competition between the external forcing and the intrinsic dynamic response. Such competition allows the bifurcation to reach a regime configuration, whose water and sediment partitionings differ from the initial conditions: specifically, a steady increase of Hd leads to a more balanced configuration, while a decrease of Hd enhances system asymmetry. On the other hand, when variations of Hd are fast with respect to the intrinsic timescale, the bifurcation response increases in magnitude, often leading to an avulsion. This dual behaviour is closely related to the width-to-depth ratio β; specifically, the rate of change at which avulsion occurs is lower for higher values of β. Ultimately, this modelling framework can be extended to model the unsteady response of fluvial bifurcations to a variety of possible deterministic and stochastic forcing conditions, including hydrological variations of flow discharge.