Piero Gili
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Piero Gili has a total of 74 co-authors. Here are the top co-authors by number of shared publications:
Manuela Battipede
33 shared publications- Angelo Lerro
Department of Mechanical and Aerospace Engineering, Polytechnic University of Turin, Turin, Italy
11 shared publications - Manuela Battipede
Department of Mechanical and Aerospace Engineering DIMEAS, Politecnico di Torino, C.so Duca degli Abruzzi 24, 10129 Torino, Italy
11 shared publications Marco Lando
Politecnico di Torino, 10129 Torino, Italy
11 shared publications- Alberto Brandl
Politecnico di Torino
8 shared publications M. Battipede
7 shared publications
Latest Publications
- 1 January 2024
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 3094 (1) , 280010
Range estimation of a novel concept electric aircraft based on modified Breguet equation
The electric vertical-take off and landing aircraft are able to perform vertical flights, equipped with an electric propulsion and energy storage system. This k The electric vertical-take off and landing aircraft are able to perform vertical flights, equipped with an electric propulsion and energy storage system. This k
- 1 January 2024
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 3094 (1) , 280010
Range estimation of a novel concept electric aircraft based on modified Breguet equation
The electric vertical-take off and landing aircraft are able to perform vertical flights, equipped with an electric propulsion and energy storage system. This k The electric vertical-take off and landing aircraft are able to perform vertical flights, equipped with an electric propulsion and energy storage system. This k
- 29 November 2022
- Published by Springer Nature
- p. 147-155
A Multidisciplinary Design Optimisation (MDO) Algorithm for the Automatic Sizing of an Unmanned Lighter-Than-Air Platform
- 29 November 2022
- Published by Springer Nature
- p. 147-155
A Multidisciplinary Design Optimisation (MDO) Algorithm for the Automatic Sizing of an Unmanned Lighter-Than-Air Platform
- Open Access
- 5 January 2022
- Published by MDPI AG in Electronics
- Vol. 11 (1) , 165
Verification in Relevant Environment of a Physics-Based Synthetic Sensor for Flow Angle Estimation
In the area of synthetic sensors for flow angle estimation, the present work aims to describe the verification in a relevant environment of a physics-based approach using a dedicated technological demonstrator. The flow angle synthetic solution is based on a model-free, or physics-based, scheme and, therefore, it is applicable to any flying body. The demonstrator also encompasses physical sensors that provide all the necessary inputs to the synthetic sensors to estimate the angle-of-attack and the angle-of-sideslip. The uncertainty budgets of the physical sensors are evaluated to corrupt the flight simulator data with the aim of reproducing a realistic scenario to verify the synthetic sensors. The proposed approach for the flow angle estimation is suitable for modern and future aircraft, such as drones and urban mobility air vehicles. The results presented in this work show that the proposed approach can be effective in relevant scenarios even though some limitations can arise.
- 5 January 2022
- Published by MDPI AG in Electronics
- Vol. 11 (1) , 165
Open AccessVerification in Relevant Environment of a Physics-Based Synthetic Sensor for Flow Angle Estimation
In the area of synthetic sensors for flow angle estimation, the present work aims to describe the verification in a relevant environment of a physics-based approach using a dedicated technological demonstrator. The flow angle synthetic solution is based on a model-free, or physics-based, scheme and, therefore, it is applicable to any flying body. The demonstrator also encompasses physical sensors that provide all the necessary inputs to the synthetic sensors to estimate the angle-of-attack and the angle-of-sideslip. The uncertainty budgets of the physical sensors are evaluated to corrupt the flight simulator data with the aim of reproducing a realistic scenario to verify the synthetic sensors. The proposed approach for the flow angle estimation is suitable for modern and future aircraft, such as drones and urban mobility air vehicles. The results presented in this work show that the proposed approach can be effective in relevant scenarios even though some limitations can arise.
- Open Access
- 28 June 2021
- Published by MDPI AG in Remote Sensing
- Vol. 13 (13) , 2523
An Unmanned Lighter-Than-Air Platform for Large Scale Land Monitoring
The concept and preliminary design of an unmanned lighter-than-air (LTA) platform instrumented with different remote sensing technologies is presented. The aim is to assess the feasibility of using a remotely controlled airship for the land monitoring of medium sized (up to 107 m2) urban or rural areas at relatively low altitudes (below 1000 m) and its potential convenience with respect to other standard remote and in-situ sensing systems. The proposal includes equipment for high-definition visual, thermal, and hyperspectral imaging as well as LiDAR scanning. The data collected from these different sources can be then combined to obtain geo-referenced products such as land use land cover (LULC), soil water content (SWC), land surface temperature (LSC), and leaf area index (LAI) maps, among others. The potential uses for diffuse structural health monitoring over built-up areas are discussed as well. Several mission typologies are considered.
- 28 June 2021
- Published by MDPI AG in Remote Sensing
- Vol. 13 (13) , 2523
Open AccessAn Unmanned Lighter-Than-Air Platform for Large Scale Land Monitoring
The concept and preliminary design of an unmanned lighter-than-air (LTA) platform instrumented with different remote sensing technologies is presented. The aim is to assess the feasibility of using a remotely controlled airship for the land monitoring of medium sized (up to 107 m2) urban or rural areas at relatively low altitudes (below 1000 m) and its potential convenience with respect to other standard remote and in-situ sensing systems. The proposal includes equipment for high-definition visual, thermal, and hyperspectral imaging as well as LiDAR scanning. The data collected from these different sources can be then combined to obtain geo-referenced products such as land use land cover (LULC), soil water content (SWC), land surface temperature (LSC), and leaf area index (LAI) maps, among others. The potential uses for diffuse structural health monitoring over built-up areas are discussed as well. Several mission typologies are considered.
- 23 June 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 75-79
2D Closed-Form Solution for the Measurement of the Angle of Attack and Sideslip Angle
At the beginning of 2021, the measurement of the Angle of Attack and of the Angle of Sideslip is still mainly conducted with physical protruding probes. Although several alternative methods have been proposed in literature, the attention is generally focused on data-driven methods and little discussion is conducted on the mathematical problem. If the formulation that allows to associate the aerodynamic angles to other flight parameters has a closed-form solution is still an open question in the field. This paper provides a closed-form solution for a restricted problem where one of the two angle is known. Moreover, a linearized solution is provided. The result section gives evidence of the approach in simulated environment, showing the advantages of the nonlinear solution with respect to the linear one.
- 23 June 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 75-79
2D Closed-Form Solution for the Measurement of the Angle of Attack and Sideslip Angle
At the beginning of 2021, the measurement of the Angle of Attack and of the Angle of Sideslip is still mainly conducted with physical protruding probes. Although several alternative methods have been proposed in literature, the attention is generally focused on data-driven methods and little discussion is conducted on the mathematical problem. If the formulation that allows to associate the aerodynamic angles to other flight parameters has a closed-form solution is still an open question in the field. This paper provides a closed-form solution for a restricted problem where one of the two angle is known. Moreover, a linearized solution is provided. The result section gives evidence of the approach in simulated environment, showing the advantages of the nonlinear solution with respect to the linear one.
- Open Access
A Data-Driven Approach to Identify Flight Test Data Suitable to Design Angle of Attack Synthetic Sensor for Flight Control Systems
Digital avionic solutions enable advanced flight control systems to be available also on smaller aircraft. One of the safety-critical segments is the air data system. Innovative architectures allow the use of synthetic sensors that can introduce significant technological and safety advances. The application to aerodynamic angles seems the most promising towards certified applications. In this area, the best procedures concerning the design of synthetic sensors are still an open question within the field. An example is given by the MIDAS project funded in the frame of Clean Sky 2. This paper proposes two data-driven methods that allow to improve performance over the entire flight envelope with particular attention to steady state flight conditions. The training set obtained is considerably undersized with consequent reduction of computational costs. These methods are validated with a real case and they will be used as part of the MIDAS life cycle. The first method, called Data-Driven Identification and Generation of Quasi-Steady States (DIGS), is based on the (i) identification of the lift curve of the aircraft; (ii) augmentation of the training set with artificial flight data points. DIGS’s main aim is to reduce the issue of unbalanced training set. The second method, called Similar Flight Test Data Pruning (SFDP), deals with data reduction based on the isolation of quasi-unique points. Results give an evidence of the validity of the methods for the MIDAS project that can be easily adopted for generic synthetic sensor design for flight control system applications.
Open AccessA Data-Driven Approach to Identify Flight Test Data Suitable to Design Angle of Attack Synthetic Sensor for Flight Control Systems
Digital avionic solutions enable advanced flight control systems to be available also on smaller aircraft. One of the safety-critical segments is the air data system. Innovative architectures allow the use of synthetic sensors that can introduce significant technological and safety advances. The application to aerodynamic angles seems the most promising towards certified applications. In this area, the best procedures concerning the design of synthetic sensors are still an open question within the field. An example is given by the MIDAS project funded in the frame of Clean Sky 2. This paper proposes two data-driven methods that allow to improve performance over the entire flight envelope with particular attention to steady state flight conditions. The training set obtained is considerably undersized with consequent reduction of computational costs. These methods are validated with a real case and they will be used as part of the MIDAS life cycle. The first method, called Data-Driven Identification and Generation of Quasi-Steady States (DIGS), is based on the (i) identification of the lift curve of the aircraft; (ii) augmentation of the training set with artificial flight data points. DIGS’s main aim is to reduce the issue of unbalanced training set. The second method, called Similar Flight Test Data Pruning (SFDP), deals with data reduction based on the isolation of quasi-unique points. Results give an evidence of the validity of the methods for the MIDAS project that can be easily adopted for generic synthetic sensor design for flight control system applications.
- 1 April 2020
- Published by American Institute of Aeronautics and Astronautics (AIAA) in Journal of Air Transportation
- Vol. 28 (2) , 36-48
Hybrid Particle Swarm Optimization with Parameter Fixing: Application to Automatic Taxi Management
The conflicting needs of meeting the growth of air traffic, mitigating the resulting additional air pollution, and reducing costs derived from congestion at airports will push toward the modernizat...
- 1 April 2020
- Published by American Institute of Aeronautics and Astronautics (AIAA) in Journal of Air Transportation
- Vol. 28 (2) , 36-48
Hybrid Particle Swarm Optimization with Parameter Fixing: Application to Automatic Taxi Management
The conflicting needs of meeting the growth of air traffic, mitigating the resulting additional air pollution, and reducing costs derived from congestion at airports will push toward the modernizat...
- Open Access
Preliminary Design of a Model-Free Synthetic Sensor for Aerodynamic Angle Estimation for Commercial Aviation
Heterogeneity of the small aircraft category (e.g., small air transport (SAT), urban air mobility (UAM), unmanned aircraft system (UAS)), modern avionic solution (e.g., fly-by-wire (FBW)) and reduced aircraft (A/C) size require more compact, integrated, digital and modular air data system (ADS) able to measure data from the external environment. The MIDAS project, funded in the frame of the Clean Sky 2 program, aims to satisfy those recent requirements with an ADS certified for commercial applications. The main pillar lays on a smart fusion between COTS solutions and analytical sensors (patented technology) for the identification of the aerodynamic angles. The identification involves both flight dynamic relationships and data-driven state observer(s) based on neural techniques, which are deterministic once the training is completed. As this project will bring analytical sensors on board of civil aircraft as part of a redundant system for the very first time, design activities documented in this work have a particular focus on airworthiness certification aspects. At this maturity level, simulated data are used, real flight test data will be used in the next stages. Data collection is described both for the training and test aspects. Training maneuvers are defined aiming to excite all dynamic modes, whereas test maneuvers are collected aiming to validate results independently from the training set and all autopilot configurations. Results demonstrate that an alternate solution is possible enabling significant savings in terms of computational effort and lines of codes but they show, at the same time, that a better training strategy may be beneficial to cope with the new neural network architecture.
Open AccessPreliminary Design of a Model-Free Synthetic Sensor for Aerodynamic Angle Estimation for Commercial Aviation
Heterogeneity of the small aircraft category (e.g., small air transport (SAT), urban air mobility (UAM), unmanned aircraft system (UAS)), modern avionic solution (e.g., fly-by-wire (FBW)) and reduced aircraft (A/C) size require more compact, integrated, digital and modular air data system (ADS) able to measure data from the external environment. The MIDAS project, funded in the frame of the Clean Sky 2 program, aims to satisfy those recent requirements with an ADS certified for commercial applications. The main pillar lays on a smart fusion between COTS solutions and analytical sensors (patented technology) for the identification of the aerodynamic angles. The identification involves both flight dynamic relationships and data-driven state observer(s) based on neural techniques, which are deterministic once the training is completed. As this project will bring analytical sensors on board of civil aircraft as part of a redundant system for the very first time, design activities documented in this work have a particular focus on airworthiness certification aspects. At this maturity level, simulated data are used, real flight test data will be used in the next stages. Data collection is described both for the training and test aspects. Training maneuvers are defined aiming to excite all dynamic modes, whereas test maneuvers are collected aiming to validate results independently from the training set and all autopilot configurations. Results demonstrate that an alternate solution is possible enabling significant savings in terms of computational effort and lines of codes but they show, at the same time, that a better training strategy may be beneficial to cope with the new neural network architecture.
- 4 September 2019
- Published by Springer Nature in CEAS Aeronautical Journal
- Vol. 11 (1) , 249-262
Aerodynamic angle estimation: comparison between numerical results and operative environment data
- 4 September 2019
- Published by Springer Nature in CEAS Aeronautical Journal
- Vol. 11 (1) , 249-262
Aerodynamic angle estimation: comparison between numerical results and operative environment data
- 1 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 714-719
The Clean Sky 2 MIDAS Project - an Innovative Modular, Digital and Integrated Air Data System for Fly-by-Wire Applications
A simplex (not redundant) Air Data System (ADS) is adopted on air vehicles to measure a set of quantities from the external environment. Generally speaking, a simplex ADS is made up of external (i.e. installed externally on the A/C fuselage) probes and vanes (LRUs) able to measure a full set of air data:
- 1 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 714-719
The Clean Sky 2 MIDAS Project - an Innovative Modular, Digital and Integrated Air Data System for Fly-by-Wire Applications
A simplex (not redundant) Air Data System (ADS) is adopted on air vehicles to measure a set of quantities from the external environment. Generally speaking, a simplex ADS is made up of external (i.e. installed externally on the A/C fuselage) probes and vanes (LRUs) able to measure a full set of air data: