Peter Spichtinger
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Peter Spichtinger has a total of 319 co-authors. Here are the top co-authors by number of shared publications:
- Martina Krämer
Institute for Atmospheric Physics (IPA), Johannes Gutenberg University, Mainz, Germany
30 shared publications - Philipp Reutter
Institute for Atmospheric Physics, Johannes Gutenberg University Mainz, Mainz, Germany
28 shared publications - Manuel Baumgartner
Institute for Physics of the Atmosphere, Johannes Gutenberg University, Mainz, Germany
25 shared publications - Tim Lüttmer
Institute for Atmospheric Physics, Johannes Gutenberg University Mainz, Mainz, Germany
24 shared publications - Christian Rolf
Institute of Climate and Energy Systems (ICE-4), Forschungszentrum Jülich GmbH, Jülich, Germany
19 shared publications - Annette Miltenberger
Institute for Atmospheric Physics, Johannes Gutenberg University Mainz, Mainz, Germany
17 shared publications
Latest Publications
- Open Access
- 5 November 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-27
Comment on egusphere-2026-5375
Warm conveyor belts (WCBs) in extratropical cyclones transport moist boundary-layer air into the upper troposphere and form extensive mixed-phase cloud bands and cirrus cloud shields. The microphysical pathways governing ice formation within these systems remain poorly quantified, particularly with respect to heterogeneous ice nucleation and secondary ice production. We investigate the impact of uncertainty in the ice formation representation on clouds in a WCB using the ICON model with an ice modes two-moment scheme that explicitly tracks ice formed by immersion freezing (IMM), deposition nucleation (DEP), homogeneous droplet freezing (FRZ), homogeneous solution freezing (HOM), and secondary ice (SEC). We test the sensitivity of ice formation pathways to three dust INP activation schemes, perturbations of INP concentration, and three secondary ice mechanisms (rime splintering, collisional breakup, droplet fragmentation). Ice number concentrations in the cirrus regime respond strongly to both INP abundance and activation scheme. Enhanced INP concentrations strengthen heterogeneous modes, particularly DEP, leading to DEP-dominated cirrus and suppression of homogeneous nucleation. Reduced INP concentrations promote compensating increases in HOM and FRZ. Secondary ice from rime splintering and collisional breakup dominates number concentrations in low level mixed-phase clouds but is negligible in cirrus. Importantly, altering the INP activation scheme produces changes comparable in magnitude to variations in INP concentration with scaling coefficients between 0.1 and 15, highlighting substantial uncertainty in heterogeneous ice nucleation assumptions. Overall, the partitioning among ice modes is highly sensitive to microphysical assumptions, but the balance between liquid-origin and in-situ cirrus remains primarily controlled by WCB dynamics and sedimentation.
- 5 November 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-27
Open AccessComment on egusphere-2026-5375
Warm conveyor belts (WCBs) in extratropical cyclones transport moist boundary-layer air into the upper troposphere and form extensive mixed-phase cloud bands and cirrus cloud shields. The microphysical pathways governing ice formation within these systems remain poorly quantified, particularly with respect to heterogeneous ice nucleation and secondary ice production. We investigate the impact of uncertainty in the ice formation representation on clouds in a WCB using the ICON model with an ice modes two-moment scheme that explicitly tracks ice formed by immersion freezing (IMM), deposition nucleation (DEP), homogeneous droplet freezing (FRZ), homogeneous solution freezing (HOM), and secondary ice (SEC). We test the sensitivity of ice formation pathways to three dust INP activation schemes, perturbations of INP concentration, and three secondary ice mechanisms (rime splintering, collisional breakup, droplet fragmentation). Ice number concentrations in the cirrus regime respond strongly to both INP abundance and activation scheme. Enhanced INP concentrations strengthen heterogeneous modes, particularly DEP, leading to DEP-dominated cirrus and suppression of homogeneous nucleation. Reduced INP concentrations promote compensating increases in HOM and FRZ. Secondary ice from rime splintering and collisional breakup dominates number concentrations in low level mixed-phase clouds but is negligible in cirrus. Importantly, altering the INP activation scheme produces changes comparable in magnitude to variations in INP concentration with scaling coefficients between 0.1 and 15, highlighting substantial uncertainty in heterogeneous ice nucleation assumptions. Overall, the partitioning among ice modes is highly sensitive to microphysical assumptions, but the balance between liquid-origin and in-situ cirrus remains primarily controlled by WCB dynamics and sedimentation.
- Open Access
- 30 October 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-38
Evaporation of cloud particles: solutions to the population balance equation and formulation of memory based bulk schemes (MBBS, v1.0)
One of the main cloud processes is the annihilation of particles by evaporation. If the saturation ratio drops below the equilibrium level, water evaporates and diffusion transports the water vapor through the environment of the particles. While other cloud processes are investigated carefully, evaporation is somewhat neglected, and the process' formulation in models is quite simplified. In this contribution, we investigate evaporation using the population balance equation (PBE) for mass distributions. A simplified regime is chosen which allows analytical treatment of the evaporation process. The theoretical results justify the inclusion of memory variables in evaporation modeling. We develop a family of Memory-Based Bulk Schemes (MBBS) that improve the representation of number concentration loss during evaporation by tracking memory variables of the particle mass distribution. We focus on number concentration because, unlike the mass concentration, its evaporation rate depends on a point-wise value of the distribution and therefore cannot be captured reliably by standard moment-based closures. Comparisons against the full PBE solutions for idealized downdraft and oscillatory scenarios show that the higher-complexity MBBS variants, in particular the two-memory-variable scheme, substantially improve the representation of number concentration during evaporation.
- 30 October 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-38
Open AccessEvaporation of cloud particles: solutions to the population balance equation and formulation of memory based bulk schemes (MBBS, v1.0)
One of the main cloud processes is the annihilation of particles by evaporation. If the saturation ratio drops below the equilibrium level, water evaporates and diffusion transports the water vapor through the environment of the particles. While other cloud processes are investigated carefully, evaporation is somewhat neglected, and the process' formulation in models is quite simplified. In this contribution, we investigate evaporation using the population balance equation (PBE) for mass distributions. A simplified regime is chosen which allows analytical treatment of the evaporation process. The theoretical results justify the inclusion of memory variables in evaporation modeling. We develop a family of Memory-Based Bulk Schemes (MBBS) that improve the representation of number concentration loss during evaporation by tracking memory variables of the particle mass distribution. We focus on number concentration because, unlike the mass concentration, its evaporation rate depends on a point-wise value of the distribution and therefore cannot be captured reliably by standard moment-based closures. Comparisons against the full PBE solutions for idealized downdraft and oscillatory scenarios show that the higher-complexity MBBS variants, in particular the two-memory-variable scheme, substantially improve the representation of number concentration during evaporation.
- Open Access
- 30 October 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-27
Comment on egusphere-2026-5375
Warm conveyor belts (WCBs) in extratropical cyclones transport moist boundary-layer air into the upper troposphere and form extensive mixed-phase cloud bands and cirrus cloud shields. The microphysical pathways governing ice formation within these systems remain poorly quantified, particularly with respect to heterogeneous ice nucleation and secondary ice production. We investigate the impact of uncertainty in the ice formation representation on clouds in a WCB using the ICON model with an ice modes two-moment scheme that explicitly tracks ice formed by immersion freezing (IMM), deposition nucleation (DEP), homogeneous droplet freezing (FRZ), homogeneous solution freezing (HOM), and secondary ice (SEC). We test the sensitivity of ice formation pathways to three dust INP activation schemes, perturbations of INP concentration, and three secondary ice mechanisms (rime splintering, collisional breakup, droplet fragmentation). Ice number concentrations in the cirrus regime respond strongly to both INP abundance and activation scheme. Enhanced INP concentrations strengthen heterogeneous modes, particularly DEP, leading to DEP-dominated cirrus and suppression of homogeneous nucleation. Reduced INP concentrations promote compensating increases in HOM and FRZ. Secondary ice from rime splintering and collisional breakup dominates number concentrations in low level mixed-phase clouds but is negligible in cirrus. Importantly, altering the INP activation scheme produces changes comparable in magnitude to variations in INP concentration with scaling coefficients between 0.1 and 15, highlighting substantial uncertainty in heterogeneous ice nucleation assumptions. Overall, the partitioning among ice modes is highly sensitive to microphysical assumptions, but the balance between liquid-origin and in-situ cirrus remains primarily controlled by WCB dynamics and sedimentation.
- 30 October 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-27
Open AccessComment on egusphere-2026-5375
Warm conveyor belts (WCBs) in extratropical cyclones transport moist boundary-layer air into the upper troposphere and form extensive mixed-phase cloud bands and cirrus cloud shields. The microphysical pathways governing ice formation within these systems remain poorly quantified, particularly with respect to heterogeneous ice nucleation and secondary ice production. We investigate the impact of uncertainty in the ice formation representation on clouds in a WCB using the ICON model with an ice modes two-moment scheme that explicitly tracks ice formed by immersion freezing (IMM), deposition nucleation (DEP), homogeneous droplet freezing (FRZ), homogeneous solution freezing (HOM), and secondary ice (SEC). We test the sensitivity of ice formation pathways to three dust INP activation schemes, perturbations of INP concentration, and three secondary ice mechanisms (rime splintering, collisional breakup, droplet fragmentation). Ice number concentrations in the cirrus regime respond strongly to both INP abundance and activation scheme. Enhanced INP concentrations strengthen heterogeneous modes, particularly DEP, leading to DEP-dominated cirrus and suppression of homogeneous nucleation. Reduced INP concentrations promote compensating increases in HOM and FRZ. Secondary ice from rime splintering and collisional breakup dominates number concentrations in low level mixed-phase clouds but is negligible in cirrus. Importantly, altering the INP activation scheme produces changes comparable in magnitude to variations in INP concentration with scaling coefficients between 0.1 and 15, highlighting substantial uncertainty in heterogeneous ice nucleation assumptions. Overall, the partitioning among ice modes is highly sensitive to microphysical assumptions, but the balance between liquid-origin and in-situ cirrus remains primarily controlled by WCB dynamics and sedimentation.
- Open Access
- 27 October 2026
- Published by Copernicus GmbH in Geoscientific Model Development
- Vol. 19 (20) , 10185-10202
Stochastic homogeneous freezing of supercooled droplets in mixed-phase clouds in particle-based idealised microphysics framework (exemplified with PySDM v3.0)
Homogeneous freezing of supercooled cloud droplets is an important process governing ice formation during the transition from mixed-phase clouds to pure ice-phase clouds in the upper troposphere. In this study, we implement a stochastic representation of homogeneous freezing in the particle-based aerosol–cloud microphysics model PySDM, treating freezing as a Poisson process dependent on droplet volume, time step, and the nucleation rate. We compare two parameterisations of the nucleation rate: a temperature-dependent formulation and a saturation-dependent formulation. Using an idealised adiabatically ascending air-parcel framework, we investigate the distribution of freezing temperatures and the resulting ice number concentrations across ensembles that vary updraft speed, cloud condensation nuclei number concentration, droplet size distribution, and the number of super-particles. Simulations are performed both with and without vapour deposition on ice, enabling assessment of the role of the Wegener-Bergeron-Findeisen process. We find that homogeneous freezing occurs over a broad temperature range rather than at a single threshold, with freezing temperatures strongly controlled by cooling rate and droplet size. When vapour deposition on ice is active, early stochastic freezing events dominate the evolution of the frozen droplet fraction and substantially reduce the fraction of droplets that ultimately freeze. The two nucleation-rate formulations produce similar behaviour near water saturation but diverge significantly when supersaturation or subsaturation with respect to water develops, leading to pronounced differences in freezing temperatures and ice number concentrations. Our results highlight the importance of stochastic freezing formulations and nucleation-rate choice for representing cloud glaciation in models.
- 27 October 2026
- Published by Copernicus GmbH in Geoscientific Model Development
- Vol. 19 (20) , 10185-10202
Open AccessStochastic homogeneous freezing of supercooled droplets in mixed-phase clouds in particle-based idealised microphysics framework (exemplified with PySDM v3.0)
Homogeneous freezing of supercooled cloud droplets is an important process governing ice formation during the transition from mixed-phase clouds to pure ice-phase clouds in the upper troposphere. In this study, we implement a stochastic representation of homogeneous freezing in the particle-based aerosol–cloud microphysics model PySDM, treating freezing as a Poisson process dependent on droplet volume, time step, and the nucleation rate. We compare two parameterisations of the nucleation rate: a temperature-dependent formulation and a saturation-dependent formulation. Using an idealised adiabatically ascending air-parcel framework, we investigate the distribution of freezing temperatures and the resulting ice number concentrations across ensembles that vary updraft speed, cloud condensation nuclei number concentration, droplet size distribution, and the number of super-particles. Simulations are performed both with and without vapour deposition on ice, enabling assessment of the role of the Wegener-Bergeron-Findeisen process. We find that homogeneous freezing occurs over a broad temperature range rather than at a single threshold, with freezing temperatures strongly controlled by cooling rate and droplet size. When vapour deposition on ice is active, early stochastic freezing events dominate the evolution of the frozen droplet fraction and substantially reduce the fraction of droplets that ultimately freeze. The two nucleation-rate formulations produce similar behaviour near water saturation but diverge significantly when supersaturation or subsaturation with respect to water develops, leading to pronounced differences in freezing temperatures and ice number concentrations. Our results highlight the importance of stochastic freezing formulations and nucleation-rate choice for representing cloud glaciation in models.
- Open Access
- 20 October 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-27
Comment on egusphere-2026-5375
Warm conveyor belts (WCBs) in extratropical cyclones transport moist boundary-layer air into the upper troposphere and form extensive mixed-phase cloud bands and cirrus cloud shields. The microphysical pathways governing ice formation within these systems remain poorly quantified, particularly with respect to heterogeneous ice nucleation and secondary ice production. We investigate the impact of uncertainty in the ice formation representation on clouds in a WCB using the ICON model with an ice modes two-moment scheme that explicitly tracks ice formed by immersion freezing (IMM), deposition nucleation (DEP), homogeneous droplet freezing (FRZ), homogeneous solution freezing (HOM), and secondary ice (SEC). We test the sensitivity of ice formation pathways to three dust INP activation schemes, perturbations of INP concentration, and three secondary ice mechanisms (rime splintering, collisional breakup, droplet fragmentation). Ice number concentrations in the cirrus regime respond strongly to both INP abundance and activation scheme. Enhanced INP concentrations strengthen heterogeneous modes, particularly DEP, leading to DEP-dominated cirrus and suppression of homogeneous nucleation. Reduced INP concentrations promote compensating increases in HOM and FRZ. Secondary ice from rime splintering and collisional breakup dominates number concentrations in low level mixed-phase clouds but is negligible in cirrus. Importantly, altering the INP activation scheme produces changes comparable in magnitude to variations in INP concentration with scaling coefficients between 0.1 and 15, highlighting substantial uncertainty in heterogeneous ice nucleation assumptions. Overall, the partitioning among ice modes is highly sensitive to microphysical assumptions, but the balance between liquid-origin and in-situ cirrus remains primarily controlled by WCB dynamics and sedimentation.
- 20 October 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-27
Open AccessComment on egusphere-2026-5375
Warm conveyor belts (WCBs) in extratropical cyclones transport moist boundary-layer air into the upper troposphere and form extensive mixed-phase cloud bands and cirrus cloud shields. The microphysical pathways governing ice formation within these systems remain poorly quantified, particularly with respect to heterogeneous ice nucleation and secondary ice production. We investigate the impact of uncertainty in the ice formation representation on clouds in a WCB using the ICON model with an ice modes two-moment scheme that explicitly tracks ice formed by immersion freezing (IMM), deposition nucleation (DEP), homogeneous droplet freezing (FRZ), homogeneous solution freezing (HOM), and secondary ice (SEC). We test the sensitivity of ice formation pathways to three dust INP activation schemes, perturbations of INP concentration, and three secondary ice mechanisms (rime splintering, collisional breakup, droplet fragmentation). Ice number concentrations in the cirrus regime respond strongly to both INP abundance and activation scheme. Enhanced INP concentrations strengthen heterogeneous modes, particularly DEP, leading to DEP-dominated cirrus and suppression of homogeneous nucleation. Reduced INP concentrations promote compensating increases in HOM and FRZ. Secondary ice from rime splintering and collisional breakup dominates number concentrations in low level mixed-phase clouds but is negligible in cirrus. Importantly, altering the INP activation scheme produces changes comparable in magnitude to variations in INP concentration with scaling coefficients between 0.1 and 15, highlighting substantial uncertainty in heterogeneous ice nucleation assumptions. Overall, the partitioning among ice modes is highly sensitive to microphysical assumptions, but the balance between liquid-origin and in-situ cirrus remains primarily controlled by WCB dynamics and sedimentation.
- Open Access
- 9 September 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-27
Role of INP activation schemes and concentrations in controlling ice formation pathways in Warm Conveyor Belts
Warm conveyor belts (WCBs) in extratropical cyclones transport moist boundary-layer air into the upper troposphere and form extensive mixed-phase cloud bands and cirrus cloud shields. The microphysical pathways governing ice formation within these systems remain poorly quantified, particularly with respect to heterogeneous ice nucleation and secondary ice production. We investigate the impact of uncertainty in the ice formation representation on clouds in a WCB using the ICON model with an ice modes two-moment scheme that explicitly tracks ice formed by immersion freezing (IMM), deposition nucleation (DEP), homogeneous droplet freezing (FRZ), homogeneous solution freezing (HOM), and secondary ice (SEC). We test the sensitivity of ice formation pathways to three dust INP activation schemes, perturbations of INP concentration, and three secondary ice mechanisms (rime splintering, collisional breakup, droplet fragmentation). Ice number concentrations in the cirrus regime respond strongly to both INP abundance and activation scheme. Enhanced INP concentrations strengthen heterogeneous modes, particularly DEP, leading to DEP-dominated cirrus and suppression of homogeneous nucleation. Reduced INP concentrations promote compensating increases in HOM and FRZ. Secondary ice from rime splintering and collisional breakup dominates number concentrations in low level mixed-phase clouds but is negligible in cirrus. Importantly, altering the INP activation scheme produces changes comparable in magnitude to variations in INP concentration with scaling coefficients between 0.1 and 15, highlighting substantial uncertainty in heterogeneous ice nucleation assumptions. Overall, the partitioning among ice modes is highly sensitive to microphysical assumptions, but the balance between liquid-origin and in-situ cirrus remains primarily controlled by WCB dynamics and sedimentation.
- 9 September 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-27
Open AccessRole of INP activation schemes and concentrations in controlling ice formation pathways in Warm Conveyor Belts
Warm conveyor belts (WCBs) in extratropical cyclones transport moist boundary-layer air into the upper troposphere and form extensive mixed-phase cloud bands and cirrus cloud shields. The microphysical pathways governing ice formation within these systems remain poorly quantified, particularly with respect to heterogeneous ice nucleation and secondary ice production. We investigate the impact of uncertainty in the ice formation representation on clouds in a WCB using the ICON model with an ice modes two-moment scheme that explicitly tracks ice formed by immersion freezing (IMM), deposition nucleation (DEP), homogeneous droplet freezing (FRZ), homogeneous solution freezing (HOM), and secondary ice (SEC). We test the sensitivity of ice formation pathways to three dust INP activation schemes, perturbations of INP concentration, and three secondary ice mechanisms (rime splintering, collisional breakup, droplet fragmentation). Ice number concentrations in the cirrus regime respond strongly to both INP abundance and activation scheme. Enhanced INP concentrations strengthen heterogeneous modes, particularly DEP, leading to DEP-dominated cirrus and suppression of homogeneous nucleation. Reduced INP concentrations promote compensating increases in HOM and FRZ. Secondary ice from rime splintering and collisional breakup dominates number concentrations in low level mixed-phase clouds but is negligible in cirrus. Importantly, altering the INP activation scheme produces changes comparable in magnitude to variations in INP concentration with scaling coefficients between 0.1 and 15, highlighting substantial uncertainty in heterogeneous ice nucleation assumptions. Overall, the partitioning among ice modes is highly sensitive to microphysical assumptions, but the balance between liquid-origin and in-situ cirrus remains primarily controlled by WCB dynamics and sedimentation.
- Open Access
- 24 August 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-28
Reply on RC2
Homogeneous freezing of supercooled cloud droplets is an important process governing ice formation during the transition from mixed-phase clouds to pure ice-phase clouds in the upper troposphere. In this study, we implement a stochastic representation of homogeneous freezing in the particle-based aerosol–cloud microphysics model PySDM, treating freezing as a Poisson process dependent on droplet volume, time step, and the nucleation rate. We compare two parameterisations of the nucleation rate: a temperature-dependent formulation and a saturation-dependent formulation. Using an idealised adiabatically ascending air-parcel framework, we investigate the distribution of freezing temperatures and the resulting ice number concentrations across ensembles that vary updraft speed, cloud condensation nuclei number concentration, droplet size distribution, and the number of super-particles. Simulations are performed both with and without vapour deposition on ice, enabling assessment of the role of the Wegener-Bergeron-Findeisen process. We find that homogeneous freezing occurs over a broad temperature range rather than at a single threshold, with freezing temperatures strongly controlled by cooling rate and droplet size. When vapour deposition on ice is active, early stochastic freezing events dominate the evolution of the frozen droplet fraction and substantially reduce the fraction of droplets that ultimately freeze. The two nucleation-rate formulations produce similar behaviour near water saturation but diverge significantly when supersaturation or subsaturation with respect to water develops, leading to pronounced differences in freezing temperatures and ice number concentrations. Our results highlight the importance of stochastic freezing formulations and nucleation-rate choice for representing cloud glaciation in models.
- 24 August 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-28
Open AccessReply on RC2
Homogeneous freezing of supercooled cloud droplets is an important process governing ice formation during the transition from mixed-phase clouds to pure ice-phase clouds in the upper troposphere. In this study, we implement a stochastic representation of homogeneous freezing in the particle-based aerosol–cloud microphysics model PySDM, treating freezing as a Poisson process dependent on droplet volume, time step, and the nucleation rate. We compare two parameterisations of the nucleation rate: a temperature-dependent formulation and a saturation-dependent formulation. Using an idealised adiabatically ascending air-parcel framework, we investigate the distribution of freezing temperatures and the resulting ice number concentrations across ensembles that vary updraft speed, cloud condensation nuclei number concentration, droplet size distribution, and the number of super-particles. Simulations are performed both with and without vapour deposition on ice, enabling assessment of the role of the Wegener-Bergeron-Findeisen process. We find that homogeneous freezing occurs over a broad temperature range rather than at a single threshold, with freezing temperatures strongly controlled by cooling rate and droplet size. When vapour deposition on ice is active, early stochastic freezing events dominate the evolution of the frozen droplet fraction and substantially reduce the fraction of droplets that ultimately freeze. The two nucleation-rate formulations produce similar behaviour near water saturation but diverge significantly when supersaturation or subsaturation with respect to water develops, leading to pronounced differences in freezing temperatures and ice number concentrations. Our results highlight the importance of stochastic freezing formulations and nucleation-rate choice for representing cloud glaciation in models.
- Open Access
- 24 August 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-28
Reply on RC1
Homogeneous freezing of supercooled cloud droplets is an important process governing ice formation during the transition from mixed-phase clouds to pure ice-phase clouds in the upper troposphere. In this study, we implement a stochastic representation of homogeneous freezing in the particle-based aerosol–cloud microphysics model PySDM, treating freezing as a Poisson process dependent on droplet volume, time step, and the nucleation rate. We compare two parameterisations of the nucleation rate: a temperature-dependent formulation and a saturation-dependent formulation. Using an idealised adiabatically ascending air-parcel framework, we investigate the distribution of freezing temperatures and the resulting ice number concentrations across ensembles that vary updraft speed, cloud condensation nuclei number concentration, droplet size distribution, and the number of super-particles. Simulations are performed both with and without vapour deposition on ice, enabling assessment of the role of the Wegener-Bergeron-Findeisen process. We find that homogeneous freezing occurs over a broad temperature range rather than at a single threshold, with freezing temperatures strongly controlled by cooling rate and droplet size. When vapour deposition on ice is active, early stochastic freezing events dominate the evolution of the frozen droplet fraction and substantially reduce the fraction of droplets that ultimately freeze. The two nucleation-rate formulations produce similar behaviour near water saturation but diverge significantly when supersaturation or subsaturation with respect to water develops, leading to pronounced differences in freezing temperatures and ice number concentrations. Our results highlight the importance of stochastic freezing formulations and nucleation-rate choice for representing cloud glaciation in models.
- 24 August 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-28
Open AccessReply on RC1
Homogeneous freezing of supercooled cloud droplets is an important process governing ice formation during the transition from mixed-phase clouds to pure ice-phase clouds in the upper troposphere. In this study, we implement a stochastic representation of homogeneous freezing in the particle-based aerosol–cloud microphysics model PySDM, treating freezing as a Poisson process dependent on droplet volume, time step, and the nucleation rate. We compare two parameterisations of the nucleation rate: a temperature-dependent formulation and a saturation-dependent formulation. Using an idealised adiabatically ascending air-parcel framework, we investigate the distribution of freezing temperatures and the resulting ice number concentrations across ensembles that vary updraft speed, cloud condensation nuclei number concentration, droplet size distribution, and the number of super-particles. Simulations are performed both with and without vapour deposition on ice, enabling assessment of the role of the Wegener-Bergeron-Findeisen process. We find that homogeneous freezing occurs over a broad temperature range rather than at a single threshold, with freezing temperatures strongly controlled by cooling rate and droplet size. When vapour deposition on ice is active, early stochastic freezing events dominate the evolution of the frozen droplet fraction and substantially reduce the fraction of droplets that ultimately freeze. The two nucleation-rate formulations produce similar behaviour near water saturation but diverge significantly when supersaturation or subsaturation with respect to water develops, leading to pronounced differences in freezing temperatures and ice number concentrations. Our results highlight the importance of stochastic freezing formulations and nucleation-rate choice for representing cloud glaciation in models.
- Open Access
- 12 August 2026
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 26 (15) , 11235-11253
Fractal characteristics of ice-supersaturated regions in the tropopause region of the northern midlatitudes
Ice supersaturated regions (ISSRs) are air masses in the upper troposphere and lower stratosphere (UTLS) where saturation ratio over ice ( S i ) exceeds one, i.e. regions with enhanced water vapor concentrations. These are potential formation regions of cirrus clouds and contrails. While the impact of cloud free regions of enhanced water vapor on the planetary radiation balance is small to negligible, thin cirrus clouds and aircraft induced contrail cirrus formed within them might have a large radiative impact. Understanding the characteristics of ISSRs, including their geometry and seasonal variability, is essential for evaluating atmospheric models in representing ice clouds correctly. While ISSR's pathlength statistics, i.e. 1D characteristics, have already been studied, their geometric properties, particularly fractal properties such as self-similarity, and their seasonal variability remain largely unexplored. We identify ISSRs using ERA5 reanalysis data spanning from 2010 to 2020 at three pressure levels. An area-perimeter method is employed to compute fractal dimensions. The results reveal slopes implying fractal dimensions, strongly suggesting that ISSRs in the UTLS exhibit fractal behavior. A seasonal cycle in total number and area of ISSRs, as well as in the fractal dimension is found, in combination with a strong vertical variation. We hypothesize that this is caused by the seasonal variation of convective and frontal activity. We further analyzed the zonal and meridional extents of ISSRs as well as the pathlengths of modeled flights along commercial flight routes. The results of these horizontal extents are consistent with the fractal properties, and suggest distinct formation processes for ISSRs.
- 12 August 2026
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 26 (15) , 11235-11253
Open AccessFractal characteristics of ice-supersaturated regions in the tropopause region of the northern midlatitudes
Ice supersaturated regions (ISSRs) are air masses in the upper troposphere and lower stratosphere (UTLS) where saturation ratio over ice ( S i ) exceeds one, i.e. regions with enhanced water vapor concentrations. These are potential formation regions of cirrus clouds and contrails. While the impact of cloud free regions of enhanced water vapor on the planetary radiation balance is small to negligible, thin cirrus clouds and aircraft induced contrail cirrus formed within them might have a large radiative impact. Understanding the characteristics of ISSRs, including their geometry and seasonal variability, is essential for evaluating atmospheric models in representing ice clouds correctly. While ISSR's pathlength statistics, i.e. 1D characteristics, have already been studied, their geometric properties, particularly fractal properties such as self-similarity, and their seasonal variability remain largely unexplored. We identify ISSRs using ERA5 reanalysis data spanning from 2010 to 2020 at three pressure levels. An area-perimeter method is employed to compute fractal dimensions. The results reveal slopes implying fractal dimensions, strongly suggesting that ISSRs in the UTLS exhibit fractal behavior. A seasonal cycle in total number and area of ISSRs, as well as in the fractal dimension is found, in combination with a strong vertical variation. We hypothesize that this is caused by the seasonal variation of convective and frontal activity. We further analyzed the zonal and meridional extents of ISSRs as well as the pathlengths of modeled flights along commercial flight routes. The results of these horizontal extents are consistent with the fractal properties, and suggest distinct formation processes for ISSRs.
- Open Access
- 27 July 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-28
Comment on egusphere-2026-2217
Homogeneous freezing of supercooled cloud droplets is an important process governing ice formation during the transition from mixed-phase clouds to pure ice-phase clouds in the upper troposphere. In this study, we implement a stochastic representation of homogeneous freezing in the particle-based aerosol–cloud microphysics model PySDM, treating freezing as a Poisson process dependent on droplet volume, time step, and the nucleation rate. We compare two parameterisations of the nucleation rate: a temperature-dependent formulation and a saturation-dependent formulation. Using an idealised adiabatically ascending air-parcel framework, we investigate the distribution of freezing temperatures and the resulting ice number concentrations across ensembles that vary updraft speed, cloud condensation nuclei number concentration, droplet size distribution, and the number of super-particles. Simulations are performed both with and without vapour deposition on ice, enabling assessment of the role of the Wegener-Bergeron-Findeisen process. We find that homogeneous freezing occurs over a broad temperature range rather than at a single threshold, with freezing temperatures strongly controlled by cooling rate and droplet size. When vapour deposition on ice is active, early stochastic freezing events dominate the evolution of the frozen droplet fraction and substantially reduce the fraction of droplets that ultimately freeze. The two nucleation-rate formulations produce similar behaviour near water saturation but diverge significantly when supersaturation or subsaturation with respect to water develops, leading to pronounced differences in freezing temperatures and ice number concentrations. Our results highlight the importance of stochastic freezing formulations and nucleation-rate choice for representing cloud glaciation in models.
- 27 July 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-28
Open AccessComment on egusphere-2026-2217
Homogeneous freezing of supercooled cloud droplets is an important process governing ice formation during the transition from mixed-phase clouds to pure ice-phase clouds in the upper troposphere. In this study, we implement a stochastic representation of homogeneous freezing in the particle-based aerosol–cloud microphysics model PySDM, treating freezing as a Poisson process dependent on droplet volume, time step, and the nucleation rate. We compare two parameterisations of the nucleation rate: a temperature-dependent formulation and a saturation-dependent formulation. Using an idealised adiabatically ascending air-parcel framework, we investigate the distribution of freezing temperatures and the resulting ice number concentrations across ensembles that vary updraft speed, cloud condensation nuclei number concentration, droplet size distribution, and the number of super-particles. Simulations are performed both with and without vapour deposition on ice, enabling assessment of the role of the Wegener-Bergeron-Findeisen process. We find that homogeneous freezing occurs over a broad temperature range rather than at a single threshold, with freezing temperatures strongly controlled by cooling rate and droplet size. When vapour deposition on ice is active, early stochastic freezing events dominate the evolution of the frozen droplet fraction and substantially reduce the fraction of droplets that ultimately freeze. The two nucleation-rate formulations produce similar behaviour near water saturation but diverge significantly when supersaturation or subsaturation with respect to water develops, leading to pronounced differences in freezing temperatures and ice number concentrations. Our results highlight the importance of stochastic freezing formulations and nucleation-rate choice for representing cloud glaciation in models.