Bruno De Sousa Teti
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Bruno De Sousa Teti has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
- Nathalia Bezerra de Lima
Brazilian Institute for Material Joining and Coating Technologies (INTM), Federal University of Pernambuco, Recife 50740-540, Brazil
10 shared publications - Rafael Costa Manta
Brazilian Institute for Material Joining and Coating Technologies (INTM), Federal University of Pernambuco, Recife 50740-540, Brazil
6 shared publications - Esdras Carvalho Costa
Brazilian Institute for Material Joining and Coating Technologies (INTM), Federal University of Pernambuco, Recife 50740-540, Brazil
4 shared publications - Heliana Caroline Batista Nascimento
Brazilian Institute for Material Joining and Coating Technologies (INTM), Federal University of Pernambuco, Recife 50740-540, Brazil
4 shared publications - Bianca Maria Vasconcelos
Universidade de Pernambuco
3 shared publications - Eliane Maria Gorga Lago
Universidade de Pernambuco
3 shared publications
Latest Publications
- Open Access
- 6 July 2026
- Published by MDPI AG in Journal of Composites Science
- Vol. 10 (7) , 359
Influence of Hydrated Lime on Hydration Products, Phase Assemblage, and Mechanical Performance of Cement-Based Mortars
Hydrated lime is widely incorporated into cement-based mortars to improve workability and fresh-state properties; however, its influence on hydration products and mechanical performance remains insufficiently understood. This study investigates the effect of hydrated lime content on the mechanical behavior and microstructural development of cement-based mortars after 28 days of curing. Eight mortar formulations, ranging from lime-free (1:0:6) to lime-rich (1:5:6) mixtures, including intermediate and modified proportions, were evaluated through compressive strength, flexural tensile strength, and consistency tests. The microstructural evolution was investigated using complementary techniques, including X-ray fluorescence (XRF), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TG/DSC), and scanning electron microscopy coupled with energy-dispersive spectroscopy (SEM/EDS). Increasing hydrated lime content improved mortar workability but was generally associated with reduced compressive strength under the curing conditions investigated. The combined characterization techniques indicated progressive modifications in the hydration products and phase assemblage, with increased calcium-rich phases, greater evidence of carbonation, and reduced continuity of the hydraulic matrix as the hydrated lime content increased. The observed microstructural changes were qualitatively consistent with the mechanical behavior of the mortars. The conclusions of this study are restricted to the 28-day curing period investigated, and further research is required to evaluate the long-term influence of hydrated lime on carbonation and durability-related properties. These findings contribute to a better understanding of the role of hydrated lime in cement-based mortars and provide experimental evidence for the optimization of mortar formulations.
- 6 July 2026
- Published by MDPI AG in Journal of Composites Science
- Vol. 10 (7) , 359
Open AccessInfluence of Hydrated Lime on Hydration Products, Phase Assemblage, and Mechanical Performance of Cement-Based Mortars
Hydrated lime is widely incorporated into cement-based mortars to improve workability and fresh-state properties; however, its influence on hydration products and mechanical performance remains insufficiently understood. This study investigates the effect of hydrated lime content on the mechanical behavior and microstructural development of cement-based mortars after 28 days of curing. Eight mortar formulations, ranging from lime-free (1:0:6) to lime-rich (1:5:6) mixtures, including intermediate and modified proportions, were evaluated through compressive strength, flexural tensile strength, and consistency tests. The microstructural evolution was investigated using complementary techniques, including X-ray fluorescence (XRF), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TG/DSC), and scanning electron microscopy coupled with energy-dispersive spectroscopy (SEM/EDS). Increasing hydrated lime content improved mortar workability but was generally associated with reduced compressive strength under the curing conditions investigated. The combined characterization techniques indicated progressive modifications in the hydration products and phase assemblage, with increased calcium-rich phases, greater evidence of carbonation, and reduced continuity of the hydraulic matrix as the hydrated lime content increased. The observed microstructural changes were qualitatively consistent with the mechanical behavior of the mortars. The conclusions of this study are restricted to the 28-day curing period investigated, and further research is required to evaluate the long-term influence of hydrated lime on carbonation and durability-related properties. These findings contribute to a better understanding of the role of hydrated lime in cement-based mortars and provide experimental evidence for the optimization of mortar formulations.
- Open Access
- 19 May 2026
- Published by MDPI AG in Journal of Composites Science
- Vol. 10 (5) , 274
Multifunctional Effects of Jackfruit Seed Residue on the Microstructure, Durability, and Internal Curing of Cementitious Composites
The design of sustainable composite materials requires approaches that integrate performance, durability, and circularity. In this study, jackfruit seed residue (JSR), a starch-rich agro-industrial by-product, is explored as a multifunctional biopolymeric component in cement-based rendering composites within a Safe and Sustainable by Design (SSbD) framework. Despite conventional strategies based on purified polymers or synthetic admixtures, JSR is incorporated in its unprocessed form, preserving its intrinsic chemical and structural heterogeneity and enabling complex physicochemical interactions within the composite matrix. Mortar formulations containing 0%, 3%, 5%, and 7% JSR (by binder mass) were evaluated through fresh-state, mechanical, and durability tests, combined with multiscale characterization (X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, and X-ray fluorescence). The incorporation of JSR enhanced workability and significantly reduced capillary water absorption (up to 25.83%), while maintaining mechanical performance within the typical range for rendering applications, with strength gains observed at 28 days. The observed behavior is attributed to synergistic mechanisms, including water retention, internal curing, and microfiller effects, as well as ionic contributions from the mineral fraction of the residue. Further, microstructural analysis revealed refinement of the interfacial transition zone and modification of the pore network, indicating reduced transport connectivity rather than a simple decrease in total porosity. These results demonstrate that unprocessed bio-residues can act as effective multifunctional components in cementitious composites, enabling the tuning of structure–property relationships and offering a scalable pathway toward low-impact composite materials aligned with circular economy principles.
- 19 May 2026
- Published by MDPI AG in Journal of Composites Science
- Vol. 10 (5) , 274
Open AccessMultifunctional Effects of Jackfruit Seed Residue on the Microstructure, Durability, and Internal Curing of Cementitious Composites
The design of sustainable composite materials requires approaches that integrate performance, durability, and circularity. In this study, jackfruit seed residue (JSR), a starch-rich agro-industrial by-product, is explored as a multifunctional biopolymeric component in cement-based rendering composites within a Safe and Sustainable by Design (SSbD) framework. Despite conventional strategies based on purified polymers or synthetic admixtures, JSR is incorporated in its unprocessed form, preserving its intrinsic chemical and structural heterogeneity and enabling complex physicochemical interactions within the composite matrix. Mortar formulations containing 0%, 3%, 5%, and 7% JSR (by binder mass) were evaluated through fresh-state, mechanical, and durability tests, combined with multiscale characterization (X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, and X-ray fluorescence). The incorporation of JSR enhanced workability and significantly reduced capillary water absorption (up to 25.83%), while maintaining mechanical performance within the typical range for rendering applications, with strength gains observed at 28 days. The observed behavior is attributed to synergistic mechanisms, including water retention, internal curing, and microfiller effects, as well as ionic contributions from the mineral fraction of the residue. Further, microstructural analysis revealed refinement of the interfacial transition zone and modification of the pore network, indicating reduced transport connectivity rather than a simple decrease in total porosity. These results demonstrate that unprocessed bio-residues can act as effective multifunctional components in cementitious composites, enabling the tuning of structure–property relationships and offering a scalable pathway toward low-impact composite materials aligned with circular economy principles.
- Open Access
- 21 February 2026
- Published by MDPI AG in Journal of Composites Science
- Vol. 10 (2) , 111
Use of Steel Industry Waste in Mortars for Application in Buildings: A Sustainable Alternative Analyzed by Microstructural, Chemical, and Mechanical Characterization
Civil construction is considered one of the industries with the most significant environmental impact. In this sense, the main goal of this study was to investigate three different mortar sets incorporating industrial lamination waste, assessing their chemical, physical, and microstructural properties, as well as their mechanical performance to develop sustainable mortars. Cylindrical and prismatic specimens were produced using various incorporation methods: reference mortar, mortars with mill scale addition, partial replacement of cement with mill scale residue, and partial replacement of sand with residue, at proportions of 10%, 20%, 30%, 40%, and 50%. In addition, X-ray fluorescence (XRF), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and scanning electron microscopy with energy-dispersive spectroscopy (SEM/EDS) analyses were performed. Physical and mechanical tests included those for bulk density, consistency index, water absorption by capillarity, axial compressive strength, and flexural tensile strength. XRF analyses showed an increase in iron oxide content and a decrease in calcium oxide with the addition of mill scale. XRD analyses confirmed the presence of compounds such as alite and portlandite, which are common in cementitious mortars. FTIR spectra confirmed the presence of functional groups through absorption bands associated with Si–O stretching. SEM images showed slight morphological changes in the composites as the amount of industrial lamination waste increased. The addition of industrial lamination waste affected the spread index and density of the mixtures, while water absorption by capillarity decreased in some formulations with mill scale. Concerning mechanical performance, the strength of the mortars varied with increasing amounts of industrial lamination waste.
- 21 February 2026
- Published by MDPI AG in Journal of Composites Science
- Vol. 10 (2) , 111
Open AccessUse of Steel Industry Waste in Mortars for Application in Buildings: A Sustainable Alternative Analyzed by Microstructural, Chemical, and Mechanical Characterization
Civil construction is considered one of the industries with the most significant environmental impact. In this sense, the main goal of this study was to investigate three different mortar sets incorporating industrial lamination waste, assessing their chemical, physical, and microstructural properties, as well as their mechanical performance to develop sustainable mortars. Cylindrical and prismatic specimens were produced using various incorporation methods: reference mortar, mortars with mill scale addition, partial replacement of cement with mill scale residue, and partial replacement of sand with residue, at proportions of 10%, 20%, 30%, 40%, and 50%. In addition, X-ray fluorescence (XRF), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and scanning electron microscopy with energy-dispersive spectroscopy (SEM/EDS) analyses were performed. Physical and mechanical tests included those for bulk density, consistency index, water absorption by capillarity, axial compressive strength, and flexural tensile strength. XRF analyses showed an increase in iron oxide content and a decrease in calcium oxide with the addition of mill scale. XRD analyses confirmed the presence of compounds such as alite and portlandite, which are common in cementitious mortars. FTIR spectra confirmed the presence of functional groups through absorption bands associated with Si–O stretching. SEM images showed slight morphological changes in the composites as the amount of industrial lamination waste increased. The addition of industrial lamination waste affected the spread index and density of the mixtures, while water absorption by capillarity decreased in some formulations with mill scale. Concerning mechanical performance, the strength of the mortars varied with increasing amounts of industrial lamination waste.
- Open Access
- 12 January 2026
- Published by MDPI AG in Journal of Composites Science
- Vol. 10 (1) , 42
Sustainable Mortars Incorporating Industrial Rolling Mill Residues: Microstructural, Physical, and Chemical Characteristics
New alternatives in the construction industry are essential for economic, sustainable, and environmental progress. In this context, this work investigated three sets of sustainable mortars incorporating industrial lamination waste, assessing their chemical, physical, microstructural, and mechanical properties to inform their development. Cylindrical and prismatic specimens were produced using the following incorporation methods: a reference mortar, mortars with mill scale addition, partial cement replacement with mill scale, and partial sand replacement with mill scale, at proportions of 10%, 20%, 30%, 40%, and 50%. Additionally, analyses including X-ray fluorescence (XRF), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy with energy-dispersive spectroscopy (SEM/EDS) were performed. Physical and mechanical tests, including bulk density, consistency index, capillary water absorption, axial compressive strength, and flexural tensile strength, were also conducted. XRF results indicated an increase in iron oxide content and a decrease in calcium oxide with the addition of mill scale. XRD confirmed the presence of compounds, such as alite and portlandite, which are common in cementitious mortars. FTIR spectra exhibited characteristic functional groups through absorption bands related to Si–O stretching. SEM micrographs revealed slight morphological changes in the composites as the quantity of industrial lamination waste increased, and EDS data supported the XRF findings. The addition of industrial lamination waste affected the spread index and density of the mixtures, while capillary water absorption decreased in some formulations with mill scale. The strength of the mortars increased with the incorporation of industrial lamination waste. In conclusion, using industrial lamination waste in mortars is a technically and environmentally feasible alternative that aligns with the principles of sustainable development and the circular economy in the construction industry.
- 12 January 2026
- Published by MDPI AG in Journal of Composites Science
- Vol. 10 (1) , 42
Open AccessSustainable Mortars Incorporating Industrial Rolling Mill Residues: Microstructural, Physical, and Chemical Characteristics
New alternatives in the construction industry are essential for economic, sustainable, and environmental progress. In this context, this work investigated three sets of sustainable mortars incorporating industrial lamination waste, assessing their chemical, physical, microstructural, and mechanical properties to inform their development. Cylindrical and prismatic specimens were produced using the following incorporation methods: a reference mortar, mortars with mill scale addition, partial cement replacement with mill scale, and partial sand replacement with mill scale, at proportions of 10%, 20%, 30%, 40%, and 50%. Additionally, analyses including X-ray fluorescence (XRF), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy with energy-dispersive spectroscopy (SEM/EDS) were performed. Physical and mechanical tests, including bulk density, consistency index, capillary water absorption, axial compressive strength, and flexural tensile strength, were also conducted. XRF results indicated an increase in iron oxide content and a decrease in calcium oxide with the addition of mill scale. XRD confirmed the presence of compounds, such as alite and portlandite, which are common in cementitious mortars. FTIR spectra exhibited characteristic functional groups through absorption bands related to Si–O stretching. SEM micrographs revealed slight morphological changes in the composites as the quantity of industrial lamination waste increased, and EDS data supported the XRF findings. The addition of industrial lamination waste affected the spread index and density of the mixtures, while capillary water absorption decreased in some formulations with mill scale. The strength of the mortars increased with the incorporation of industrial lamination waste. In conclusion, using industrial lamination waste in mortars is a technically and environmentally feasible alternative that aligns with the principles of sustainable development and the circular economy in the construction industry.
- Open Access
- 1 November 2025
- Published by MDPI AG in Journal of Composites Science
- Vol. 9 (11) , 583
Impact of Cement Storage Temperature on the Mechanical, Microstructural, and Chemical Properties of Sustainable Mortars
The present work investigated the effect of different storage temperatures (10 °C, 30 °C, and 50 °C) on the mechanical, structural, chemical, and microstructural properties of a set of sustainable mortars with gray waste. Three types of mortar were investigated: (1) Type A, prepared from a proportion of 1 part cement: 1 part hydrated lime: 6 parts sand; (2) Type B, prepared from a proportion of 1 part cement: 1 part hydrated lime: 6 parts sand: 0.1 part waste; and (3) Type C, prepared from a proportion of 0.9 part cement: 1 part hydrated lime: 6 parts sand: 0.1 part waste. The waste incorporation reduced compressive strength by 8%, while partial cement replacement reduced by 33%. The cement storage at 10 °C preserved the compressive strength, whereas storage at 50 °C increased it by 8.8%. In type B mortar, the waste incorporation improved compressive strength by 19% at 50 °C. The most substantial enhancement occurred in type C mortar, where cement replacement with residue and storage at 50 °C led to a 27% increase. These results highlight the potential of higher storage temperatures to mitigate cement degradation in humid environments. Furthermore, XRD analysis revealed that cement storage temperature did not affect the formation of primary cement phases, as degradation products were chemically similar to hydration products. However, sustainable mortars exhibited changes in the C-S-H phase signal when the cement is stored for 90 days at 30 °C. Finally, SEM and EDS analyses identified variations in Ca, Si, and O proportions depending on storage conditions.
- 1 November 2025
- Published by MDPI AG in Journal of Composites Science
- Vol. 9 (11) , 583
Open AccessImpact of Cement Storage Temperature on the Mechanical, Microstructural, and Chemical Properties of Sustainable Mortars
The present work investigated the effect of different storage temperatures (10 °C, 30 °C, and 50 °C) on the mechanical, structural, chemical, and microstructural properties of a set of sustainable mortars with gray waste. Three types of mortar were investigated: (1) Type A, prepared from a proportion of 1 part cement: 1 part hydrated lime: 6 parts sand; (2) Type B, prepared from a proportion of 1 part cement: 1 part hydrated lime: 6 parts sand: 0.1 part waste; and (3) Type C, prepared from a proportion of 0.9 part cement: 1 part hydrated lime: 6 parts sand: 0.1 part waste. The waste incorporation reduced compressive strength by 8%, while partial cement replacement reduced by 33%. The cement storage at 10 °C preserved the compressive strength, whereas storage at 50 °C increased it by 8.8%. In type B mortar, the waste incorporation improved compressive strength by 19% at 50 °C. The most substantial enhancement occurred in type C mortar, where cement replacement with residue and storage at 50 °C led to a 27% increase. These results highlight the potential of higher storage temperatures to mitigate cement degradation in humid environments. Furthermore, XRD analysis revealed that cement storage temperature did not affect the formation of primary cement phases, as degradation products were chemically similar to hydration products. However, sustainable mortars exhibited changes in the C-S-H phase signal when the cement is stored for 90 days at 30 °C. Finally, SEM and EDS analyses identified variations in Ca, Si, and O proportions depending on storage conditions.
- Open Access
- 8 February 2025
- Published by Elsevier in Next Materials
- Vol. 8
Impacts of high CDW levels on the chemical, microstructural, and mechanical behavior of cement-based mortars
- 8 February 2025
- Published by Elsevier in Next Materials
- Vol. 8
Open AccessImpacts of high CDW levels on the chemical, microstructural, and mechanical behavior of cement-based mortars
- Open Access
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Ambiente Construído
- Vol. 25, e138069
Evaluation of probability distributions in the study of characteristic compressive strength of metakaolin concrete blocks
This comprehensive study meticulously evaluated six probability distribution models for the compressive strength of 24 concrete blocks, 12 with metakaolin and 12 without addition. The models analyzed were Lognormal, Gamma, Normal, Weibull, Beta, and Exponential. For blocks with metakaolin, the Lognormal distribution presented the best fit, followed by Gamma, Normal, Beta, and Weibull, while the Exponential needed to be more adequate. In blocks without metakaolin, the Gamma distribution was the most efficient, followed by Normal, Weibull, Lognormal, and Beta, with the Exponential also inadequate. The model parameters were adjusted based on the resistance frequencies estimated for each group of samples. Thus, Lognormal and Gamma performed better in predicting compressive strength, depending on the presence or absence of metakaolin. The Exponential distribution, in turn, was considered inadequate in both cases.
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Ambiente Construído
- Vol. 25, e138069
Open AccessEvaluation of probability distributions in the study of characteristic compressive strength of metakaolin concrete blocks
This comprehensive study meticulously evaluated six probability distribution models for the compressive strength of 24 concrete blocks, 12 with metakaolin and 12 without addition. The models analyzed were Lognormal, Gamma, Normal, Weibull, Beta, and Exponential. For blocks with metakaolin, the Lognormal distribution presented the best fit, followed by Gamma, Normal, Beta, and Weibull, while the Exponential needed to be more adequate. In blocks without metakaolin, the Gamma distribution was the most efficient, followed by Normal, Weibull, Lognormal, and Beta, with the Exponential also inadequate. The model parameters were adjusted based on the resistance frequencies estimated for each group of samples. Thus, Lognormal and Gamma performed better in predicting compressive strength, depending on the presence or absence of metakaolin. The Exponential distribution, in turn, was considered inadequate in both cases.
- Open Access
- 1 August 2024
- Published by Brazilian Journals in Contribuciones A Las Ciencias Sociales
- Vol. 17 (8) , e9978
Waste glass as an eco-friendly substitute in plastering mortars: analyzing microstructure, thermal, and mechanical properties
This study investigates waste glass (WG) as an environmentally friendly substitute for natural sand in cement mixtures. Plastering mortars were fabricated by replacing sand with WG at proportions of 10%, 20%, and 30%. X-ray diffraction, Thermogravimetry, Scanning Electron Microscopy, and Energy-dispersive X-ray spectroscopy characterized the mortars. Compressive strength was measured at two ages (7 and 28 days) for WG-containing mortars. Results confirm the suitability of waste glass as a sand replacement in mortars, with the 20% WG sample showing optimal compressive strength, contributing to environmental and economic impact reduction. Thermogravimetric analysis of the 30% WG mortar shows a significant difference in mass loss percentages compared to the reference mortar, losing only 3.65% at 28 days versus 7.85%. Additionally, waste glass increased mortar density, reducing porosity and enhancing structural uniformity. Despite a decrease in compressive strength values, the results remain satisfactory for application in the Civil Construction industry. This comprehensive exploration underscores the potential of waste glass as a sustainable alternative, emphasizing its positive effects on both performance and environmental considerations.
- 1 August 2024
- Published by Brazilian Journals in Contribuciones A Las Ciencias Sociales
- Vol. 17 (8) , e9978
Open AccessWaste glass as an eco-friendly substitute in plastering mortars: analyzing microstructure, thermal, and mechanical properties
This study investigates waste glass (WG) as an environmentally friendly substitute for natural sand in cement mixtures. Plastering mortars were fabricated by replacing sand with WG at proportions of 10%, 20%, and 30%. X-ray diffraction, Thermogravimetry, Scanning Electron Microscopy, and Energy-dispersive X-ray spectroscopy characterized the mortars. Compressive strength was measured at two ages (7 and 28 days) for WG-containing mortars. Results confirm the suitability of waste glass as a sand replacement in mortars, with the 20% WG sample showing optimal compressive strength, contributing to environmental and economic impact reduction. Thermogravimetric analysis of the 30% WG mortar shows a significant difference in mass loss percentages compared to the reference mortar, losing only 3.65% at 28 days versus 7.85%. Additionally, waste glass increased mortar density, reducing porosity and enhancing structural uniformity. Despite a decrease in compressive strength values, the results remain satisfactory for application in the Civil Construction industry. This comprehensive exploration underscores the potential of waste glass as a sustainable alternative, emphasizing its positive effects on both performance and environmental considerations.
- Open Access
- 5 April 2024
- Published by Revista de Engenharia e Pesquisa Aplicada in Revista de Engenharia e Pesquisa Aplicada
- Vol. 9 (2) , 80-87
Avaliação da Distribuição Estatística dos Acidentes de Trajeto no Brasil
Acidente de percurso é aquele que ocorre da residência para o local de trabalho ou deste para aquela, sendo de acordo com a legislação brasileira, considerado como acidente de trabalho. O número de acidentes no percurso casa - trabalho - casa cresceu 41,2%, entre 2007 e 2013 como foi verificado no Levantamento da Confederação Nacional da Indústria. O objetivo deste trabalho é analisar os dados de acidentes de trajeto registrados entre 2005 e 2015 no Brasil pelo Ministério do Trabalho e Previdência Social através da estatística, entre cinco distribuições de probabilidade, identificando a que melhor se ajusta a série histórica, de forma a compreender melhor a ocorrência de tais eventos. Os dados estudados neste trabalho foram obtidos através do Portal Dataprev de Dados Abertos. Com auxílio dos softwares Excel e PAST, foram realizados testes para as variáveis aleatórias discretas e as seguintes distribuições de Probabilidades: Normal, log-normal, beta, gama e Weibull. Para cada uma das distribuições, foram feitos três testes de aderência: Kolmogorov-Smirnov, Qui-quadrado e Anderson Darling, em que foi adotado o nível de significância de 5%. Verificou-se que a distribuição Beta foi a melhor que aderiu aos dados de acidentes, enquanto a distribuição Log-Normal foi a última colocada.
- 5 April 2024
- Published by Revista de Engenharia e Pesquisa Aplicada in Revista de Engenharia e Pesquisa Aplicada
- Vol. 9 (2) , 80-87
Open AccessAvaliação da Distribuição Estatística dos Acidentes de Trajeto no Brasil
Acidente de percurso é aquele que ocorre da residência para o local de trabalho ou deste para aquela, sendo de acordo com a legislação brasileira, considerado como acidente de trabalho. O número de acidentes no percurso casa - trabalho - casa cresceu 41,2%, entre 2007 e 2013 como foi verificado no Levantamento da Confederação Nacional da Indústria. O objetivo deste trabalho é analisar os dados de acidentes de trajeto registrados entre 2005 e 2015 no Brasil pelo Ministério do Trabalho e Previdência Social através da estatística, entre cinco distribuições de probabilidade, identificando a que melhor se ajusta a série histórica, de forma a compreender melhor a ocorrência de tais eventos. Os dados estudados neste trabalho foram obtidos através do Portal Dataprev de Dados Abertos. Com auxílio dos softwares Excel e PAST, foram realizados testes para as variáveis aleatórias discretas e as seguintes distribuições de Probabilidades: Normal, log-normal, beta, gama e Weibull. Para cada uma das distribuições, foram feitos três testes de aderência: Kolmogorov-Smirnov, Qui-quadrado e Anderson Darling, em que foi adotado o nível de significância de 5%. Verificou-se que a distribuição Beta foi a melhor que aderiu aos dados de acidentes, enquanto a distribuição Log-Normal foi a última colocada.
- Open Access
- 5 April 2024
- Published by Revista de Engenharia e Pesquisa Aplicada in Revista de Engenharia e Pesquisa Aplicada
- Vol. 9 (2) , 71-79
Queda por Diferença de Nível: Uma Revisão de Literatura Sobre as Causas dos Acidentes Em Andaimes na Construção Civil
A construção civil é considerada um dos ramos mais antigos do mundo em se tratando de indústrias. Entretanto, possui registros elevados de perdas humanas por acidentes de trabalho, principalmente gerados por quedas em situação de diferença de nível, choques elétricos e soterramentos. O objetivo deste trabalho foi encontrar características em comum nas situações não conformes com potencial de acidente e nos acidentes de trabalho com andaimes investigados através de uma revisão da literatura científica. A metodologia seguiu as orientações dos itens de Relatório Preferidos para Revisões Sistemáticas e Meta-análises (PRISMA) utilizando algumas palavras chaves em concordância com os descritores booleanos “AND” e “OR”, como: "scaffolding"; "construction"; “fall”; “height”; “safety”; “fall from height”; “accidents”; “PPE” e “construction”. Inicialmente, foram encontrados 1280 artigos nas bases de dados Scopus e CAPES, porém os filtros utilizados levaram à 38 potenciais estudos. Após a leitura completa deles, 19 artigos foram incluídos para revisão detalhada. Nos artigos incluídos em 64,50% dos casos analisados, as não conformidades com potencial de gerar acidentes ou que geraram acidentes, foram originadas das causas técnicas. Dentro desse percentual, 27,70% relataram ausência de guarda corpo, 21,01% verificaram ausência da plataforma principal e 15,60% verificaram ausência de comunicação vertical entre os andaimes.
- 5 April 2024
- Published by Revista de Engenharia e Pesquisa Aplicada in Revista de Engenharia e Pesquisa Aplicada
- Vol. 9 (2) , 71-79
Open AccessQueda por Diferença de Nível: Uma Revisão de Literatura Sobre as Causas dos Acidentes Em Andaimes na Construção Civil
A construção civil é considerada um dos ramos mais antigos do mundo em se tratando de indústrias. Entretanto, possui registros elevados de perdas humanas por acidentes de trabalho, principalmente gerados por quedas em situação de diferença de nível, choques elétricos e soterramentos. O objetivo deste trabalho foi encontrar características em comum nas situações não conformes com potencial de acidente e nos acidentes de trabalho com andaimes investigados através de uma revisão da literatura científica. A metodologia seguiu as orientações dos itens de Relatório Preferidos para Revisões Sistemáticas e Meta-análises (PRISMA) utilizando algumas palavras chaves em concordância com os descritores booleanos “AND” e “OR”, como: "scaffolding"; "construction"; “fall”; “height”; “safety”; “fall from height”; “accidents”; “PPE” e “construction”. Inicialmente, foram encontrados 1280 artigos nas bases de dados Scopus e CAPES, porém os filtros utilizados levaram à 38 potenciais estudos. Após a leitura completa deles, 19 artigos foram incluídos para revisão detalhada. Nos artigos incluídos em 64,50% dos casos analisados, as não conformidades com potencial de gerar acidentes ou que geraram acidentes, foram originadas das causas técnicas. Dentro desse percentual, 27,70% relataram ausência de guarda corpo, 21,01% verificaram ausência da plataforma principal e 15,60% verificaram ausência de comunicação vertical entre os andaimes.