Esdras Carvalho Costa
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Esdras Carvalho Costa has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Nathalia Bezerra de Lima
Brazilian Institute for Material Joining and Coating Technologies (INTM), Federal University of Pernambuco, Recife 50740-540, Brazil
5 shared publications - Bruno De Sousa Teti
Brazilian Institute for Material Joining and Coating Technologies (INTM), Federal University of Pernambuco, Recife 50740-540, Brazil
4 shared publications - Ana Laura M. Amorim
Brazilian Institute for Material Joining and Coating Technologies (INTM), Federal University of Pernambuco, Recife 50740-540, Brazil
2 shared publications - João Victor B. L. Oliveira
Department of Fundamental Chemistry, Federal University of Pernambuco, Recife 50740-540, Brazil
2 shared publications - Kleber Goncalves Bezerra Alves
Department of Mechanical Engineering, Federal University of Pernambuco, Recife 50740-530, Brazil
2 shared publications - Rebecca Caroline M. Coelho
Brazilian Institute for Material Joining and Coating Technologies (INTM), Federal University of Pernambuco, Recife 50740-540, Brazil
2 shared publications
Latest Publications
- Open Access
- 6 July 2026
- Published by MDPI AG in Journal of Composites Science
- Vol. 10 (7) , 359
Influence of Hydrated Lime on Hydration Products, Phase Assemblage, and Mechanical Performance of Cement-Based Mortars
Hydrated lime is widely incorporated into cement-based mortars to improve workability and fresh-state properties; however, its influence on hydration products and mechanical performance remains insufficiently understood. This study investigates the effect of hydrated lime content on the mechanical behavior and microstructural development of cement-based mortars after 28 days of curing. Eight mortar formulations, ranging from lime-free (1:0:6) to lime-rich (1:5:6) mixtures, including intermediate and modified proportions, were evaluated through compressive strength, flexural tensile strength, and consistency tests. The microstructural evolution was investigated using complementary techniques, including X-ray fluorescence (XRF), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TG/DSC), and scanning electron microscopy coupled with energy-dispersive spectroscopy (SEM/EDS). Increasing hydrated lime content improved mortar workability but was generally associated with reduced compressive strength under the curing conditions investigated. The combined characterization techniques indicated progressive modifications in the hydration products and phase assemblage, with increased calcium-rich phases, greater evidence of carbonation, and reduced continuity of the hydraulic matrix as the hydrated lime content increased. The observed microstructural changes were qualitatively consistent with the mechanical behavior of the mortars. The conclusions of this study are restricted to the 28-day curing period investigated, and further research is required to evaluate the long-term influence of hydrated lime on carbonation and durability-related properties. These findings contribute to a better understanding of the role of hydrated lime in cement-based mortars and provide experimental evidence for the optimization of mortar formulations.
- 6 July 2026
- Published by MDPI AG in Journal of Composites Science
- Vol. 10 (7) , 359
Open AccessInfluence of Hydrated Lime on Hydration Products, Phase Assemblage, and Mechanical Performance of Cement-Based Mortars
Hydrated lime is widely incorporated into cement-based mortars to improve workability and fresh-state properties; however, its influence on hydration products and mechanical performance remains insufficiently understood. This study investigates the effect of hydrated lime content on the mechanical behavior and microstructural development of cement-based mortars after 28 days of curing. Eight mortar formulations, ranging from lime-free (1:0:6) to lime-rich (1:5:6) mixtures, including intermediate and modified proportions, were evaluated through compressive strength, flexural tensile strength, and consistency tests. The microstructural evolution was investigated using complementary techniques, including X-ray fluorescence (XRF), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TG/DSC), and scanning electron microscopy coupled with energy-dispersive spectroscopy (SEM/EDS). Increasing hydrated lime content improved mortar workability but was generally associated with reduced compressive strength under the curing conditions investigated. The combined characterization techniques indicated progressive modifications in the hydration products and phase assemblage, with increased calcium-rich phases, greater evidence of carbonation, and reduced continuity of the hydraulic matrix as the hydrated lime content increased. The observed microstructural changes were qualitatively consistent with the mechanical behavior of the mortars. The conclusions of this study are restricted to the 28-day curing period investigated, and further research is required to evaluate the long-term influence of hydrated lime on carbonation and durability-related properties. These findings contribute to a better understanding of the role of hydrated lime in cement-based mortars and provide experimental evidence for the optimization of mortar formulations.
- Open Access
- 19 May 2026
- Published by MDPI AG in Journal of Composites Science
- Vol. 10 (5) , 274
Multifunctional Effects of Jackfruit Seed Residue on the Microstructure, Durability, and Internal Curing of Cementitious Composites
The design of sustainable composite materials requires approaches that integrate performance, durability, and circularity. In this study, jackfruit seed residue (JSR), a starch-rich agro-industrial by-product, is explored as a multifunctional biopolymeric component in cement-based rendering composites within a Safe and Sustainable by Design (SSbD) framework. Despite conventional strategies based on purified polymers or synthetic admixtures, JSR is incorporated in its unprocessed form, preserving its intrinsic chemical and structural heterogeneity and enabling complex physicochemical interactions within the composite matrix. Mortar formulations containing 0%, 3%, 5%, and 7% JSR (by binder mass) were evaluated through fresh-state, mechanical, and durability tests, combined with multiscale characterization (X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, and X-ray fluorescence). The incorporation of JSR enhanced workability and significantly reduced capillary water absorption (up to 25.83%), while maintaining mechanical performance within the typical range for rendering applications, with strength gains observed at 28 days. The observed behavior is attributed to synergistic mechanisms, including water retention, internal curing, and microfiller effects, as well as ionic contributions from the mineral fraction of the residue. Further, microstructural analysis revealed refinement of the interfacial transition zone and modification of the pore network, indicating reduced transport connectivity rather than a simple decrease in total porosity. These results demonstrate that unprocessed bio-residues can act as effective multifunctional components in cementitious composites, enabling the tuning of structure–property relationships and offering a scalable pathway toward low-impact composite materials aligned with circular economy principles.
- 19 May 2026
- Published by MDPI AG in Journal of Composites Science
- Vol. 10 (5) , 274
Open AccessMultifunctional Effects of Jackfruit Seed Residue on the Microstructure, Durability, and Internal Curing of Cementitious Composites
The design of sustainable composite materials requires approaches that integrate performance, durability, and circularity. In this study, jackfruit seed residue (JSR), a starch-rich agro-industrial by-product, is explored as a multifunctional biopolymeric component in cement-based rendering composites within a Safe and Sustainable by Design (SSbD) framework. Despite conventional strategies based on purified polymers or synthetic admixtures, JSR is incorporated in its unprocessed form, preserving its intrinsic chemical and structural heterogeneity and enabling complex physicochemical interactions within the composite matrix. Mortar formulations containing 0%, 3%, 5%, and 7% JSR (by binder mass) were evaluated through fresh-state, mechanical, and durability tests, combined with multiscale characterization (X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, and X-ray fluorescence). The incorporation of JSR enhanced workability and significantly reduced capillary water absorption (up to 25.83%), while maintaining mechanical performance within the typical range for rendering applications, with strength gains observed at 28 days. The observed behavior is attributed to synergistic mechanisms, including water retention, internal curing, and microfiller effects, as well as ionic contributions from the mineral fraction of the residue. Further, microstructural analysis revealed refinement of the interfacial transition zone and modification of the pore network, indicating reduced transport connectivity rather than a simple decrease in total porosity. These results demonstrate that unprocessed bio-residues can act as effective multifunctional components in cementitious composites, enabling the tuning of structure–property relationships and offering a scalable pathway toward low-impact composite materials aligned with circular economy principles.
- Open Access
- 21 February 2026
- Published by MDPI AG in Journal of Composites Science
- Vol. 10 (2) , 111
Use of Steel Industry Waste in Mortars for Application in Buildings: A Sustainable Alternative Analyzed by Microstructural, Chemical, and Mechanical Characterization
Civil construction is considered one of the industries with the most significant environmental impact. In this sense, the main goal of this study was to investigate three different mortar sets incorporating industrial lamination waste, assessing their chemical, physical, and microstructural properties, as well as their mechanical performance to develop sustainable mortars. Cylindrical and prismatic specimens were produced using various incorporation methods: reference mortar, mortars with mill scale addition, partial replacement of cement with mill scale residue, and partial replacement of sand with residue, at proportions of 10%, 20%, 30%, 40%, and 50%. In addition, X-ray fluorescence (XRF), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and scanning electron microscopy with energy-dispersive spectroscopy (SEM/EDS) analyses were performed. Physical and mechanical tests included those for bulk density, consistency index, water absorption by capillarity, axial compressive strength, and flexural tensile strength. XRF analyses showed an increase in iron oxide content and a decrease in calcium oxide with the addition of mill scale. XRD analyses confirmed the presence of compounds such as alite and portlandite, which are common in cementitious mortars. FTIR spectra confirmed the presence of functional groups through absorption bands associated with Si–O stretching. SEM images showed slight morphological changes in the composites as the amount of industrial lamination waste increased. The addition of industrial lamination waste affected the spread index and density of the mixtures, while water absorption by capillarity decreased in some formulations with mill scale. Concerning mechanical performance, the strength of the mortars varied with increasing amounts of industrial lamination waste.
- 21 February 2026
- Published by MDPI AG in Journal of Composites Science
- Vol. 10 (2) , 111
Open AccessUse of Steel Industry Waste in Mortars for Application in Buildings: A Sustainable Alternative Analyzed by Microstructural, Chemical, and Mechanical Characterization
Civil construction is considered one of the industries with the most significant environmental impact. In this sense, the main goal of this study was to investigate three different mortar sets incorporating industrial lamination waste, assessing their chemical, physical, and microstructural properties, as well as their mechanical performance to develop sustainable mortars. Cylindrical and prismatic specimens were produced using various incorporation methods: reference mortar, mortars with mill scale addition, partial replacement of cement with mill scale residue, and partial replacement of sand with residue, at proportions of 10%, 20%, 30%, 40%, and 50%. In addition, X-ray fluorescence (XRF), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and scanning electron microscopy with energy-dispersive spectroscopy (SEM/EDS) analyses were performed. Physical and mechanical tests included those for bulk density, consistency index, water absorption by capillarity, axial compressive strength, and flexural tensile strength. XRF analyses showed an increase in iron oxide content and a decrease in calcium oxide with the addition of mill scale. XRD analyses confirmed the presence of compounds such as alite and portlandite, which are common in cementitious mortars. FTIR spectra confirmed the presence of functional groups through absorption bands associated with Si–O stretching. SEM images showed slight morphological changes in the composites as the amount of industrial lamination waste increased. The addition of industrial lamination waste affected the spread index and density of the mixtures, while water absorption by capillarity decreased in some formulations with mill scale. Concerning mechanical performance, the strength of the mortars varied with increasing amounts of industrial lamination waste.
- Open Access
- 12 January 2026
- Published by MDPI AG in Journal of Composites Science
- Vol. 10 (1) , 42
Sustainable Mortars Incorporating Industrial Rolling Mill Residues: Microstructural, Physical, and Chemical Characteristics
New alternatives in the construction industry are essential for economic, sustainable, and environmental progress. In this context, this work investigated three sets of sustainable mortars incorporating industrial lamination waste, assessing their chemical, physical, microstructural, and mechanical properties to inform their development. Cylindrical and prismatic specimens were produced using the following incorporation methods: a reference mortar, mortars with mill scale addition, partial cement replacement with mill scale, and partial sand replacement with mill scale, at proportions of 10%, 20%, 30%, 40%, and 50%. Additionally, analyses including X-ray fluorescence (XRF), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy with energy-dispersive spectroscopy (SEM/EDS) were performed. Physical and mechanical tests, including bulk density, consistency index, capillary water absorption, axial compressive strength, and flexural tensile strength, were also conducted. XRF results indicated an increase in iron oxide content and a decrease in calcium oxide with the addition of mill scale. XRD confirmed the presence of compounds, such as alite and portlandite, which are common in cementitious mortars. FTIR spectra exhibited characteristic functional groups through absorption bands related to Si–O stretching. SEM micrographs revealed slight morphological changes in the composites as the quantity of industrial lamination waste increased, and EDS data supported the XRF findings. The addition of industrial lamination waste affected the spread index and density of the mixtures, while capillary water absorption decreased in some formulations with mill scale. The strength of the mortars increased with the incorporation of industrial lamination waste. In conclusion, using industrial lamination waste in mortars is a technically and environmentally feasible alternative that aligns with the principles of sustainable development and the circular economy in the construction industry.
- 12 January 2026
- Published by MDPI AG in Journal of Composites Science
- Vol. 10 (1) , 42
Open AccessSustainable Mortars Incorporating Industrial Rolling Mill Residues: Microstructural, Physical, and Chemical Characteristics
New alternatives in the construction industry are essential for economic, sustainable, and environmental progress. In this context, this work investigated three sets of sustainable mortars incorporating industrial lamination waste, assessing their chemical, physical, microstructural, and mechanical properties to inform their development. Cylindrical and prismatic specimens were produced using the following incorporation methods: a reference mortar, mortars with mill scale addition, partial cement replacement with mill scale, and partial sand replacement with mill scale, at proportions of 10%, 20%, 30%, 40%, and 50%. Additionally, analyses including X-ray fluorescence (XRF), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy with energy-dispersive spectroscopy (SEM/EDS) were performed. Physical and mechanical tests, including bulk density, consistency index, capillary water absorption, axial compressive strength, and flexural tensile strength, were also conducted. XRF results indicated an increase in iron oxide content and a decrease in calcium oxide with the addition of mill scale. XRD confirmed the presence of compounds, such as alite and portlandite, which are common in cementitious mortars. FTIR spectra exhibited characteristic functional groups through absorption bands related to Si–O stretching. SEM micrographs revealed slight morphological changes in the composites as the quantity of industrial lamination waste increased, and EDS data supported the XRF findings. The addition of industrial lamination waste affected the spread index and density of the mixtures, while capillary water absorption decreased in some formulations with mill scale. The strength of the mortars increased with the incorporation of industrial lamination waste. In conclusion, using industrial lamination waste in mortars is a technically and environmentally feasible alternative that aligns with the principles of sustainable development and the circular economy in the construction industry.
- Open Access
- 1 April 2024
- Published by Brazilian Journals in Contribuciones A Las Ciencias Sociales
- Vol. 17 (4) , e6574
Mechanical and chemical effects of incorporating stone powder residue in mortars
The construction industry is actively integrating technological innovations to optimize processes and mitigate solid waste in response to global challenges due to population growth and globalization. In this sense, this work addresses the imperative of sustainable development and waste decrease in construction. The research delves into using solid waste, such as ceramic block waste, granites, and marbles, in concrete and mortar production, highlighting challenges related to porosity and reduced mechanical strength. Additionally, the study investigates the incorporation of fibers to enhance the tensile strength of mortars. The main goal is the analysis of stone waste incorporation in mortar production, replacing 10% of sand, cement, and lime by considering particle size, water absorption, and chemical properties of stone powder. Experimental procedures involved cement of type 2, fine sand, and hydrated lime, with sieving systems applied for sand particle size testing. Compressive strength tests of a set of mortar compositions, including reference and modified proportions, were performed. chemical analysis through X-ray fluorescence (XRF) revealed composition aspects of stone powder and its impact on cementitious composites. Finally, it is advanced insights into compressive strength, particularly when the sand is replaced by stone powder, leading to the potential of stone powder to enhance sustainability in construction practices.
- 1 April 2024
- Published by Brazilian Journals in Contribuciones A Las Ciencias Sociales
- Vol. 17 (4) , e6574
Open AccessMechanical and chemical effects of incorporating stone powder residue in mortars
The construction industry is actively integrating technological innovations to optimize processes and mitigate solid waste in response to global challenges due to population growth and globalization. In this sense, this work addresses the imperative of sustainable development and waste decrease in construction. The research delves into using solid waste, such as ceramic block waste, granites, and marbles, in concrete and mortar production, highlighting challenges related to porosity and reduced mechanical strength. Additionally, the study investigates the incorporation of fibers to enhance the tensile strength of mortars. The main goal is the analysis of stone waste incorporation in mortar production, replacing 10% of sand, cement, and lime by considering particle size, water absorption, and chemical properties of stone powder. Experimental procedures involved cement of type 2, fine sand, and hydrated lime, with sieving systems applied for sand particle size testing. Compressive strength tests of a set of mortar compositions, including reference and modified proportions, were performed. chemical analysis through X-ray fluorescence (XRF) revealed composition aspects of stone powder and its impact on cementitious composites. Finally, it is advanced insights into compressive strength, particularly when the sand is replaced by stone powder, leading to the potential of stone powder to enhance sustainability in construction practices.