Ana Amaral
Research Subjects
Ana Amaral has a total of 92 co-authors. Here are the top co-authors by number of shared publications:
- Guilherme Lavareda
Universidade Nova de Lisboa
55 shared publications - Carlos Nunes de Carvalho
Dept. de Ciência dos Materiais, Faculdade de Ciências e Tecnologia (UNL), 2825-114 Caparica, Portugal
35 shared publications - Pedro Brogueira
Laboratório de Instrumentação e Física Experimental de Partículas-LIP and Instituto Superior Técnico-IST, Universidade de Lisboa-UL, Portugal
19 shared publications C. Nunes de Carvalho
13 shared publications- Elvira Fortunato
CENIMAT|i3N, Department of Materials Science, School of Science and Technology, NOVA University Lisbon and CEMOP/UNINOVA, 2829-516 Caparica, Portugal
11 shared publications - Joao Valente
Optoelectronics Research Centre and Centre for Photonic Metamaterials, University of Southampton, Highfield, Southampton SO17 1BJ, UK
7 shared publications
Latest Publications
- Open Access
- 20 January 2026
- Published by Elsevier in Optical Materials
- Vol. 174
Composition-dependent optical properties and dielectric function modeling of PECVD-grown hydrogenated amorphous silicon carbonitride thin films
- 20 January 2026
- Published by Elsevier in Optical Materials
- Vol. 174
Open AccessComposition-dependent optical properties and dielectric function modeling of PECVD-grown hydrogenated amorphous silicon carbonitride thin films
- 17 October 2023
- Published by Elsevier in Optical Materials
- Vol. 145
Effect of dehydrogenation on optical constants of silicon nitride thin films
- 17 October 2023
- Published by Elsevier in Optical Materials
- Vol. 145
Effect of dehydrogenation on optical constants of silicon nitride thin films
- Open Access
- 20 June 2022
- Published by Copernicus GmbH
Identification of karst depressions through Digital Elevation Models and high resolution satellite images
Digital Elevation Models are numerical representations of the topography in a regular grid of points, which are obtained by vectoring contour lines, as well as aerial and orbital data. From these images it is possible to carry out various analyses, such as the delimitation of hydrographic basins, calculation of flow accumulation, delimiting elevations and depressions in the terrain, as well as performing the geomorphological mapping of the landscape. In view of this, several methodologies emerged with the purpose of identifying specific features on the ground, such as sinkholes. An example of a method used to identify features of this type is the semi-automatic sinkhole identification technique, which consists of calculating the difference between a filled DEM (procedure performed by the Fill tool in ArcGis software) and the original DEM. The difference between these two products generates areas of endorheic flow accumulation, on which morphometric indices and neighborhood criteria are applied, making it possible to identify the location and shape of these probable sinkholes. However, despite the functionality of the method, validation is a fundamental step, and fieldwork is a very expensive solution for the researcher. In view of this, this work aims to propose the alternative validation of data generated by the semiautomatic method through high resolution satellite images. The research had Central Brazil as its study area, more precisely the northwest region of the Tocantins Basin, where the karst relief is expressive and well developed. The image used for the application of the semiautomatic method was the Copernicus DEM (resolution of 30 meters) and for its subsequent validation, images from the SENTINEL 2 satellite (resolution of 10 meters) were used together with Google Earth images. With the application of the semi-automatic sinkhole identification method, 16.712 depressed features were identified in the terrain, in an area of approximately 30,000 km², however, through the visual inspection of the generated data, it was observed that many polygons were more related to the carving of the drainage channel than with karst features. In view of this, the validation of these polygons were carried out through images from the SENTINEL satellite, where, through visual analysis, about 1.332 depressed features remained. The criteria used for validation was the identification of circular features that had water inside them or that indicated they were undergoing processes of rock dissolution. Vegetation was also another criterion, considering that in places with sinkholes, they tend to be more humid and consequently have a greener vegetation. It was concluded with this study that the semiautomatic method presented good results when analyzed together with satellite images, allowing the analysis of large areas in a short period of time and with low costs, being, therefore, a good validation procedure in alternative to field work.
- 20 June 2022
- Published by Copernicus GmbH
Open AccessIdentification of karst depressions through Digital Elevation Models and high resolution satellite images
Digital Elevation Models are numerical representations of the topography in a regular grid of points, which are obtained by vectoring contour lines, as well as aerial and orbital data. From these images it is possible to carry out various analyses, such as the delimitation of hydrographic basins, calculation of flow accumulation, delimiting elevations and depressions in the terrain, as well as performing the geomorphological mapping of the landscape. In view of this, several methodologies emerged with the purpose of identifying specific features on the ground, such as sinkholes. An example of a method used to identify features of this type is the semi-automatic sinkhole identification technique, which consists of calculating the difference between a filled DEM (procedure performed by the Fill tool in ArcGis software) and the original DEM. The difference between these two products generates areas of endorheic flow accumulation, on which morphometric indices and neighborhood criteria are applied, making it possible to identify the location and shape of these probable sinkholes. However, despite the functionality of the method, validation is a fundamental step, and fieldwork is a very expensive solution for the researcher. In view of this, this work aims to propose the alternative validation of data generated by the semiautomatic method through high resolution satellite images. The research had Central Brazil as its study area, more precisely the northwest region of the Tocantins Basin, where the karst relief is expressive and well developed. The image used for the application of the semiautomatic method was the Copernicus DEM (resolution of 30 meters) and for its subsequent validation, images from the SENTINEL 2 satellite (resolution of 10 meters) were used together with Google Earth images. With the application of the semi-automatic sinkhole identification method, 16.712 depressed features were identified in the terrain, in an area of approximately 30,000 km², however, through the visual inspection of the generated data, it was observed that many polygons were more related to the carving of the drainage channel than with karst features. In view of this, the validation of these polygons were carried out through images from the SENTINEL satellite, where, through visual analysis, about 1.332 depressed features remained. The criteria used for validation was the identification of circular features that had water inside them or that indicated they were undergoing processes of rock dissolution. Vegetation was also another criterion, considering that in places with sinkholes, they tend to be more humid and consequently have a greener vegetation. It was concluded with this study that the semiautomatic method presented good results when analyzed together with satellite images, allowing the analysis of large areas in a short period of time and with low costs, being, therefore, a good validation procedure in alternative to field work.
- 5 March 2020
- Published by SPIE-Intl Soc Optical Eng
- Vol. 11281, 1128127
An indium-oxide electrode with discontinuous Au layers for plasmonic devices
In this contribution we report on a low cost plasmonic electrode for light-sensing applications. The electrode combines a conducting nonstoichiometric indium oxide (InOx) layer with an ultrathin (~5 nm) discontinuous Au layer. The InOx and Au layers were deposited on glass substrates by plasma enhanced reactive thermal evaporation and thermal evaporation, respectively. Several device configurations with one or two Au layer(s) sandwiched between InOx layers were fabricated and characterized. The morphological and structural properties of both Au and InOx layers were analyzed using AFM and XRD techniques. In particular, the effect of thermal annealing (673 K, 15 min) on the surface morphology of Au layers grown on bare glass and InOx-coated substrate was investigated. It has been also found that the oxide film grown above an underlying nanostructured Au layer is amorphous, while a reference InOx film on glass is nanocrystalline with a smooth surface. The electrical properties of InOx grown on the Au surface are worsened due to Au-induced structural disorder. The observed difference in transmission spectra of the glass/InOx/Au and glass/Au/InOx structures indicates the difference in the morphology of the metal layer. Thus, the optical and morphological properties of the InOx electrode can be varied in a wide range by incorporating several Au layers.
- 5 March 2020
- Published by SPIE-Intl Soc Optical Eng
- Vol. 11281, 1128127
An indium-oxide electrode with discontinuous Au layers for plasmonic devices
In this contribution we report on a low cost plasmonic electrode for light-sensing applications. The electrode combines a conducting nonstoichiometric indium oxide (InOx) layer with an ultrathin (~5 nm) discontinuous Au layer. The InOx and Au layers were deposited on glass substrates by plasma enhanced reactive thermal evaporation and thermal evaporation, respectively. Several device configurations with one or two Au layer(s) sandwiched between InOx layers were fabricated and characterized. The morphological and structural properties of both Au and InOx layers were analyzed using AFM and XRD techniques. In particular, the effect of thermal annealing (673 K, 15 min) on the surface morphology of Au layers grown on bare glass and InOx-coated substrate was investigated. It has been also found that the oxide film grown above an underlying nanostructured Au layer is amorphous, while a reference InOx film on glass is nanocrystalline with a smooth surface. The electrical properties of InOx grown on the Au surface are worsened due to Au-induced structural disorder. The observed difference in transmission spectra of the glass/InOx/Au and glass/Au/InOx structures indicates the difference in the morphology of the metal layer. Thus, the optical and morphological properties of the InOx electrode can be varied in a wide range by incorporating several Au layers.
- Open Access
- 1 January 2020
- Published by EDP Sciences in The European Physical Journal Applied Physics
- Vol. 89 (1) , 10302
Photoconductivity kinetics of indium sulfofluoride thin films
Indium sulfofluoride is an amorphous wide-gap semiconductor exhibiting high sensitivity to UV radiation. This work reports on the kinetics of photoconductivity in indium sulfofluoride thin films along with their electrical and optical properties. The films were deposited by radio-frequency plasma-enhanced reactive thermal evaporation. The film characterization includes electrical, optical, and photoconductivity measurements. The films are highly transparent in the visible-infrared range due to an indirect bandgap of 2.8 eV. The spectral response measurements have revealed existence of the band tail states. The synthesized compound is highly resistive (∼200 MΩ-cm at 300 K) and exhibits extremely slow photocurrent relaxations. Photoconductivity kinetics was studied under various excitation conditions. A dependence of the photocurrent on the incident photon flux was also determined.
- 1 January 2020
- Published by EDP Sciences in The European Physical Journal Applied Physics
- Vol. 89 (1) , 10302
Open AccessPhotoconductivity kinetics of indium sulfofluoride thin films
Indium sulfofluoride is an amorphous wide-gap semiconductor exhibiting high sensitivity to UV radiation. This work reports on the kinetics of photoconductivity in indium sulfofluoride thin films along with their electrical and optical properties. The films were deposited by radio-frequency plasma-enhanced reactive thermal evaporation. The film characterization includes electrical, optical, and photoconductivity measurements. The films are highly transparent in the visible-infrared range due to an indirect bandgap of 2.8 eV. The spectral response measurements have revealed existence of the band tail states. The synthesized compound is highly resistive (∼200 MΩ-cm at 300 K) and exhibits extremely slow photocurrent relaxations. Photoconductivity kinetics was studied under various excitation conditions. A dependence of the photocurrent on the incident photon flux was also determined.
- 1 December 2019
- Published by Elsevier in Thin Solid Films
- Vol. 691
Conducting indium oxide films on plastic substrates by plasma enhanced reactive thermal evaporation
- 1 December 2019
- Published by Elsevier in Thin Solid Films
- Vol. 691
Conducting indium oxide films on plastic substrates by plasma enhanced reactive thermal evaporation
- 1 February 2019
- Published by Elsevier in Thin Solid Films
- Vol. 671, 49-52
Optical and photoconductive properties of indium sulfide fluoride thin films
- 1 February 2019
- Published by Elsevier in Thin Solid Films
- Vol. 671, 49-52
Optical and photoconductive properties of indium sulfide fluoride thin films
- 1 January 2018
- Published by Springer Nature in MRS Advances
- Vol. 3 (4) , 207-212
Etchability Dependence of InOx and ITO Thin Films by Plasma Enhanced Reactive Thermal Evaporation on Structural Properties and Deposition Conditions
- 1 January 2018
- Published by Springer Nature in MRS Advances
- Vol. 3 (4) , 207-212
Etchability Dependence of InOx and ITO Thin Films by Plasma Enhanced Reactive Thermal Evaporation on Structural Properties and Deposition Conditions
- Open Access
- 1 December 2016
- Published by Elsevier in Energy Procedia
- Vol. 102, 96-101
Automated rf-PERTE System for Room Temperature Deposition of TCO Coatings
- 1 December 2016
- Published by Elsevier in Energy Procedia
- Vol. 102, 96-101
Open AccessAutomated rf-PERTE System for Room Temperature Deposition of TCO Coatings
- 1 February 2016
- Published by Elsevier in Materials Science in Semiconductor Processing
- Vol. 42, 210-214
Dopant transfer from poly-si thin films to c-Si: An alternative technique for device processing
- 1 February 2016
- Published by Elsevier in Materials Science in Semiconductor Processing
- Vol. 42, 210-214
Dopant transfer from poly-si thin films to c-Si: An alternative technique for device processing