Mehdi Mahdavi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mehdi Mahdavi has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Hossein Saidi
Department of Electrical and Computer Engineering, Isfahan University of Technology, Isfahan, Iran
4 shared publications Mohammad Javad Omidi
Department of Electrical and Computer Engineering, Isfahan University of Technology, Isfahan 84156-83111, Iran
4 shared publications- Mahmoud Daneshvar Farzanegan
Isfahan University of Technology
3 shared publications Maryam Monemian
Department of Electrical and Computer Engineering Isfahan University of Technology Isfahan Iran
3 shared publications- Mohammad Sadegh Fazel
Department of Electrical and Computer Engineering, Isfahan University of Technology, Isfahan, Iran
3 shared publications Alireza Homayounzadeh
Isfahan University of Technology
2 shared publications
Latest Publications
- Open Access
- 30 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Vehicular Technology
- Vol. 6, 2828-2841
Federated Reinforcement Learning for Energy-Efficient D2D-IoT Networks With AoI Awareness
This paper proposes a federated reinforcement learning (FRL) framework for optimizing energy efficiency (EE) and Age of Information (AoI) in device-to-device (D2D) and Internet of Things (IoT) networks. The model leverages simultaneous wireless information and power transfer (SWIPT) with heterogeneous energy harvesting mechanisms-time switching (TS) for D2D users and power splitting (PS) for IoT devices. The objective is to maximize EE while satisfying constraints on data rate, AoI, power transmission, spectrum sharing, and time allocation. The resulting non-convex mixed-integer nonlinear programming problem is addressed using an FRL approach, where a software-defined network controller coordinates distributed agents to optimize resource allocation while preserving data privacy. Simulations demonstrate that the proposed framework achieves up to 25% higher EE and maintains AoI below critical thresholds compared to baseline methods, offering a scalable solution for energy-constrained, time-sensitive communication systems.
- 30 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Vehicular Technology
- Vol. 6, 2828-2841
Open AccessFederated Reinforcement Learning for Energy-Efficient D2D-IoT Networks With AoI Awareness
This paper proposes a federated reinforcement learning (FRL) framework for optimizing energy efficiency (EE) and Age of Information (AoI) in device-to-device (D2D) and Internet of Things (IoT) networks. The model leverages simultaneous wireless information and power transfer (SWIPT) with heterogeneous energy harvesting mechanisms-time switching (TS) for D2D users and power splitting (PS) for IoT devices. The objective is to maximize EE while satisfying constraints on data rate, AoI, power transmission, spectrum sharing, and time allocation. The resulting non-convex mixed-integer nonlinear programming problem is addressed using an FRL approach, where a software-defined network controller coordinates distributed agents to optimize resource allocation while preserving data privacy. Simulations demonstrate that the proposed framework achieves up to 25% higher EE and maintains AoI below critical thresholds compared to baseline methods, offering a scalable solution for energy-constrained, time-sensitive communication systems.
- Open Access
- 20 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Vehicular Technology
- Vol. 6, 52-67
Enhancing Information Freshness and Energy Efficiency in D2D Networks Through DRL-Based Scheduling and Resource Management
This paper investigates resource management in device-to-device (D2D) networks coexisting with cellular user equipment (CUEs). We introduce a novel model for joint scheduling and resource management in D2D networks, taking into account environmental constraints. To preserve information freshness, measured by minimizing the average age of information (AoI), and to effectively utilize energy harvesting (EH) technology to satisfy the network's energy needs, we formulate an online optimization problem. This formulation considers factors such as the quality of service (QoS) for both CUEs and D2Ds, available power, information freshness, and environmental sensing requirements. Due to the mixed-integer nonlinear nature and online characteristics of the problem, we propose a deep reinforcement learning (DRL) approach to solve it effectively. Numerical results show that the proposed joint scheduling and resource management strategy, utilizing the soft actor-critic (SAC) algorithm, reduces the average AoI by 20% compared to other baseline methods.
- 20 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Vehicular Technology
- Vol. 6, 52-67
Open AccessEnhancing Information Freshness and Energy Efficiency in D2D Networks Through DRL-Based Scheduling and Resource Management
This paper investigates resource management in device-to-device (D2D) networks coexisting with cellular user equipment (CUEs). We introduce a novel model for joint scheduling and resource management in D2D networks, taking into account environmental constraints. To preserve information freshness, measured by minimizing the average age of information (AoI), and to effectively utilize energy harvesting (EH) technology to satisfy the network's energy needs, we formulate an online optimization problem. This formulation considers factors such as the quality of service (QoS) for both CUEs and D2Ds, available power, information freshness, and environmental sensing requirements. Due to the mixed-integer nonlinear nature and online characteristics of the problem, we propose a deep reinforcement learning (DRL) approach to solve it effectively. Numerical results show that the proposed joint scheduling and resource management strategy, utilizing the soft actor-critic (SAC) algorithm, reduces the average AoI by 20% compared to other baseline methods.
- 27 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 74 (2) , 2810-2825
Enhancing Connectivity and Transmission Robustness for Vehicular Communications Assisted by SGF NOMA and Full-Duplex Relaying
This paper merges the advantages of full-duplex (FD) multi-antenna cooperative relaying and non-orthogonal multiple access (NOMA)-aided semi-grant-free (SGF) transmission schemes to fulfill the requirements of lower latency, higher reliability and a greater number of connected devices in the vehicular networks. To achieve these objectives, a low complexity and cost-efficient hybrid NOMA-OMA-based resource allocation mechanism is introduced which can enhance network connectivity without aggravating interference. The hybrid successive-interference-cancellation (SIC) decoding method is utilized to improve transmission robustness. Additionally, a novel hybrid SIC decoding approach is specifically designed when the transmitted signals experience the same fading effects over a common channel transmission mode, i.e. the link between the relay and the base station (BS). We show that the FD relay-assisted vehicular communication system suffers from an outage probability error floor. Hence a modified zero-forcing (ZF) criterion-based transmit beamformer is designed to enhance the transmission robustness and eliminate the residual self-interference (SI) caused by FD operation. Moreover, a truncated Gaussian distribution is considered to model vehicle mobility. In order to minimize the line-of-sight (LoS) link obstruction phenomenon, the optimal vehicle speed is derived. Further, the exact and asymptotic outage probability expressions are derived, based on which the analysis of diversity order is provided. To validate the accuracy of our analytical results, Monte-Carlo simulations are conducted. Our results reveal that the hybrid SIC-based decoding scheme for SGF NOMA transmission provides a superior outage performance compared to the conventional NOMA transmission with the conventional SIC-based decoding scheme. Additionally, combining the hybrid SIC decoding method with the relay beamforming approach can eliminate the outage probability error floor while guaranteeing the quality of service (QoS) for the primary vehicle in the uplink FD cooperative vehicular communication system.
- 27 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 74 (2) , 2810-2825
Enhancing Connectivity and Transmission Robustness for Vehicular Communications Assisted by SGF NOMA and Full-Duplex Relaying
This paper merges the advantages of full-duplex (FD) multi-antenna cooperative relaying and non-orthogonal multiple access (NOMA)-aided semi-grant-free (SGF) transmission schemes to fulfill the requirements of lower latency, higher reliability and a greater number of connected devices in the vehicular networks. To achieve these objectives, a low complexity and cost-efficient hybrid NOMA-OMA-based resource allocation mechanism is introduced which can enhance network connectivity without aggravating interference. The hybrid successive-interference-cancellation (SIC) decoding method is utilized to improve transmission robustness. Additionally, a novel hybrid SIC decoding approach is specifically designed when the transmitted signals experience the same fading effects over a common channel transmission mode, i.e. the link between the relay and the base station (BS). We show that the FD relay-assisted vehicular communication system suffers from an outage probability error floor. Hence a modified zero-forcing (ZF) criterion-based transmit beamformer is designed to enhance the transmission robustness and eliminate the residual self-interference (SI) caused by FD operation. Moreover, a truncated Gaussian distribution is considered to model vehicle mobility. In order to minimize the line-of-sight (LoS) link obstruction phenomenon, the optimal vehicle speed is derived. Further, the exact and asymptotic outage probability expressions are derived, based on which the analysis of diversity order is provided. To validate the accuracy of our analytical results, Monte-Carlo simulations are conducted. Our results reveal that the hybrid SIC-based decoding scheme for SGF NOMA transmission provides a superior outage performance compared to the conventional NOMA transmission with the conventional SIC-based decoding scheme. Additionally, combining the hybrid SIC decoding method with the relay beamforming approach can eliminate the outage probability error floor while guaranteeing the quality of service (QoS) for the primary vehicle in the uplink FD cooperative vehicular communication system.
- 2 September 2022
- Published by Wiley in Transactions on Emerging Telecommunications Technologies
- Vol. 33 (12)
A novel hybrid backscatter and conventional algorithm for multi‐hop Internet of Things networks
This article investigates a multi‐hop cognitive radio network in terms of end‐to‐end bit delivery. The network exploits backscatter communication (BackCom) and harvest‐then‐transmit (HTT) mode in a hybrid manner. Such a network can be used in Internet of Things (IoT) applications in which IoT users coexist with a primary network and use the primary spectrum to transmit data in both BackCom and HTT modes. Besides, such users can harvest energy from the primary signals. A novel hybrid backscatter and conventional transmission (HBCT) algorithm is proposed in order to maximize end‐to‐end bit delivery by jointly optimizing time and power allocations. For this goal, we formulate a nonconvex optimization problem. Next, we transform the problem into a convex one and develop a new analytical formulation by which we calculate the optimal power and time allocation in closed‐form equations. The numerical results demonstrate the superiority of HBCT compared with current schemes.
- 2 September 2022
- Published by Wiley in Transactions on Emerging Telecommunications Technologies
- Vol. 33 (12)
A novel hybrid backscatter and conventional algorithm for multi‐hop Internet of Things networks
This article investigates a multi‐hop cognitive radio network in terms of end‐to‐end bit delivery. The network exploits backscatter communication (BackCom) and harvest‐then‐transmit (HTT) mode in a hybrid manner. Such a network can be used in Internet of Things (IoT) applications in which IoT users coexist with a primary network and use the primary spectrum to transmit data in both BackCom and HTT modes. Besides, such users can harvest energy from the primary signals. A novel hybrid backscatter and conventional transmission (HBCT) algorithm is proposed in order to maximize end‐to‐end bit delivery by jointly optimizing time and power allocations. For this goal, we formulate a nonconvex optimization problem. Next, we transform the problem into a convex one and develop a new analytical formulation by which we calculate the optimal power and time allocation in closed‐form equations. The numerical results demonstrate the superiority of HBCT compared with current schemes.
- 25 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 11 (10) , 2076-2079
Outage Analysis of Multiuser MIMO-NOMA Transmissions in Uplink Full-Duplex Cooperative System
This work merges the advantages of non-orthogonal-multiple-access (NOMA) and multi-antenna communication in a full-duplex (FD) uplink cooperative system, where two cellular users communicate with a base-station (BS). A cooperative FD relay is applied to assist the cell-edge user. To consider the effects of practical communications, interference links are regarded under imperfectly canceling mode. To remove the effect of interference signals at the BS, the zero-forcing (ZF) method is used. Outage probabilities are derived in closed-form. The simulation results reveal by applying ZF in BS and suppressing interference, FD mode achieves better outage performance than half-duplex (HD) in uplink cooperative multi-antenna NOMA communication.
- 25 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 11 (10) , 2076-2079
Outage Analysis of Multiuser MIMO-NOMA Transmissions in Uplink Full-Duplex Cooperative System
This work merges the advantages of non-orthogonal-multiple-access (NOMA) and multi-antenna communication in a full-duplex (FD) uplink cooperative system, where two cellular users communicate with a base-station (BS). A cooperative FD relay is applied to assist the cell-edge user. To consider the effects of practical communications, interference links are regarded under imperfectly canceling mode. To remove the effect of interference signals at the BS, the zero-forcing (ZF) method is used. Outage probabilities are derived in closed-form. The simulation results reveal by applying ZF in BS and suppressing interference, FD mode achieves better outage performance than half-duplex (HD) in uplink cooperative multi-antenna NOMA communication.
- 1 June 2020
- Published by Elsevier in International Journal of Electrical Power & Energy Systems
- Vol. 118, 105815
Home energy management system based on task classification and the resident’s requirements
- 1 June 2020
- Published by Elsevier in International Journal of Electrical Power & Energy Systems
- Vol. 118, 105815
Home energy management system based on task classification and the resident’s requirements
- 12 August 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Systems Journal
- Vol. 14 (2) , 2109-2120
Sum-Throughput Maximization of Secondary Users in an In-Band Full-Duplex Cognitive Wireless Powered Communication Network
This paper studies a cognitive wireless powered communication network (CWPCN). Such a network consists of some distributed secondary users (SUs) and a hybrid access point (H-AP) as a secondary network which is in the vicinity of a primary network. In this model, H-AP and SUs can operate in two modes which are an in-band full-duplex (I-FD) mode and the half-duplex (HD) mode. In the former mode, the network is called FD-CWPCN-FD while for the latter mode the HD-CWPCN-HD is used. An underlay spectrum sharing model is also considered. The goal is to maximize the sum-throughput of SUs by optimal selection of allocated time and energy to SUs in both I-FD and HD modes. By using convex optimization techniques and proposing an algorithm that is called H-AP-based joint optimal time and power allocation, we obtain the closed-form expressions for the optimal allocated time and energy. Numerical results illustrate when the transmitted power from H-AP is low or self-interference cancellation in H-AP is more accurate, FD-CWPCN-FD has higher sum-throughput than HD-CWPCN-HD.
- 12 August 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Systems Journal
- Vol. 14 (2) , 2109-2120
Sum-Throughput Maximization of Secondary Users in an In-Band Full-Duplex Cognitive Wireless Powered Communication Network
This paper studies a cognitive wireless powered communication network (CWPCN). Such a network consists of some distributed secondary users (SUs) and a hybrid access point (H-AP) as a secondary network which is in the vicinity of a primary network. In this model, H-AP and SUs can operate in two modes which are an in-band full-duplex (I-FD) mode and the half-duplex (HD) mode. In the former mode, the network is called FD-CWPCN-FD while for the latter mode the HD-CWPCN-HD is used. An underlay spectrum sharing model is also considered. The goal is to maximize the sum-throughput of SUs by optimal selection of allocated time and energy to SUs in both I-FD and HD modes. By using convex optimization techniques and proposing an algorithm that is called H-AP-based joint optimal time and power allocation, we obtain the closed-form expressions for the optimal allocated time and energy. Numerical results illustrate when the transmitted power from H-AP is low or self-interference cancellation in H-AP is more accurate, FD-CWPCN-FD has higher sum-throughput than HD-CWPCN-HD.
- 26 December 2018
- Published by Wiley in Transactions on Emerging Telecommunications Technologies
- Vol. 30 (5)
Improving the lifetime of multichannel cognitive radio sensor networks via new spectrum sensing method
Cognitive Radio Sensor Networks (CRSNs) are wireless sensor networks implemented with cognitive radio capability to provide spectrum resources for sensors in an opportunistic manner. The application of CRSNs can be found in the paradigm of Internet of Things (IoT) where each sensor represents an object in the IoT paradigm. In order to prevent simultaneous transmissions of Primary Users (PUs) and CRSN nodes, sensors should be aware of the presence of PUs. One of the most common methods for making the sensors aware of the presence of PUs is consecutive spectrum sensing. Since the sensors have the duty of both sensing environment and transmitting the results, their battery lives are highly prone to rapid drain. In addition, the lack of effective management of sensor operations for spectrum sensing may lead to short longevity of the network. In this paper, the energy consumption process of sensors in such networks has been analyzed and an energy‐based algorithm is proposed to appropriately select sensors based on their detection probabilities for spectrum sensing. The analytical and numerical results confirm the improved lifetime and performance based on our proposed algorithm in comparison with the conventional ones. Moreover, the computational complexity of the proposed algorithm is significantly lower than that of the existing methods.
- 26 December 2018
- Published by Wiley in Transactions on Emerging Telecommunications Technologies
- Vol. 30 (5)
Improving the lifetime of multichannel cognitive radio sensor networks via new spectrum sensing method
Cognitive Radio Sensor Networks (CRSNs) are wireless sensor networks implemented with cognitive radio capability to provide spectrum resources for sensors in an opportunistic manner. The application of CRSNs can be found in the paradigm of Internet of Things (IoT) where each sensor represents an object in the IoT paradigm. In order to prevent simultaneous transmissions of Primary Users (PUs) and CRSN nodes, sensors should be aware of the presence of PUs. One of the most common methods for making the sensors aware of the presence of PUs is consecutive spectrum sensing. Since the sensors have the duty of both sensing environment and transmitting the results, their battery lives are highly prone to rapid drain. In addition, the lack of effective management of sensor operations for spectrum sensing may lead to short longevity of the network. In this paper, the energy consumption process of sensors in such networks has been analyzed and an energy‐based algorithm is proposed to appropriately select sensors based on their detection probabilities for spectrum sensing. The analytical and numerical results confirm the improved lifetime and performance based on our proposed algorithm in comparison with the conventional ones. Moreover, the computational complexity of the proposed algorithm is significantly lower than that of the existing methods.
- Open Access
- 10 April 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 6, 22305-22323
Discrete-Time Markov Chain Analysis of Energy Efficiency in a CR Network Regarding Primary and Secondary Traffic With Primary User Returns
In cognitive radio networks (CRNs) coexistence between primary and secondary networks is allowed to exploit the spectrum bands more efficiently. To have a green CR network, energy efficiency (EE) as well as collision probability between such networks are vital key performance. While, it is desired to improve EE, the latter should be decreased as much as possible. Therefore, interference between the primary user (PU) and secondary user (SU) are of high importance.. Two kinds of interference are unavoidable. They are sensing error and PU reoccupancies interferences. While most studies focus on the sensing error interference, with the dynamic PU, the latter is also quite intense. Moreover, a precise investigation on the effect of such interference necessitates considering the PU and SU traffic behavior. Therefore, in this study a new analytical framework is proposed in which energy efficiency and collision probability are formulated. The traffic behaviors of PU and a general SU traffic are also considered. Using renewal reward theory, energy efficiency and collision probability are then extracted and investigated for different dynamic rates of the primary user traffic. For this, sensing error interference, PU-re-occupancy interference and total energy consumption are derived in closed form expressions. The queue stability of SU’s buffer is also investigated. Finally, simulation results are provided to justify the theoretical results. Suitable values for sensing and transmission times are obtained to maximize the energy efficiency under collision and queue stability constraints.
- 10 April 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 6, 22305-22323
Open AccessDiscrete-Time Markov Chain Analysis of Energy Efficiency in a CR Network Regarding Primary and Secondary Traffic With Primary User Returns
In cognitive radio networks (CRNs) coexistence between primary and secondary networks is allowed to exploit the spectrum bands more efficiently. To have a green CR network, energy efficiency (EE) as well as collision probability between such networks are vital key performance. While, it is desired to improve EE, the latter should be decreased as much as possible. Therefore, interference between the primary user (PU) and secondary user (SU) are of high importance.. Two kinds of interference are unavoidable. They are sensing error and PU reoccupancies interferences. While most studies focus on the sensing error interference, with the dynamic PU, the latter is also quite intense. Moreover, a precise investigation on the effect of such interference necessitates considering the PU and SU traffic behavior. Therefore, in this study a new analytical framework is proposed in which energy efficiency and collision probability are formulated. The traffic behaviors of PU and a general SU traffic are also considered. Using renewal reward theory, energy efficiency and collision probability are then extracted and investigated for different dynamic rates of the primary user traffic. For this, sensing error interference, PU-re-occupancy interference and total energy consumption are derived in closed form expressions. The queue stability of SU’s buffer is also investigated. Finally, simulation results are provided to justify the theoretical results. Suitable values for sensing and transmission times are obtained to maximize the energy efficiency under collision and queue stability constraints.
- 9 April 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 5 (4) , 2715-2728
A New Relay Policy in RF Energy Harvesting for IoT Networks—A Cooperative Network Approach
In this paper, a new RF energy harvesting policy is proposed for Internet of Things (IoT) networks using cooperative communication approach. The proposed policy is evaluated in three devices network which are source, relay and destination. Such a network model can be adopted in most IoT networks. Three scenarios are studied, where the relay has RF Energy Harvesting (RF-EH) capability with limited battery in all scenarios. However, the source has unlimited energy in the first scenario, but the limited energy in the second and third ones. In addition, in the third scenario source has RF-EH capability. New analyses based on Discrete Phase-Type Distribution (D-PHD) model as well as a Simple Analytical Method (SAM) are presented to derive performance metrics which are network effective lifetime, average delay of source/relay packets and source packets overflow. The effect of energy harvesting on such metrics are investigated to find the optimum relay policy. Results show that the proposed policy can maximize network effective lifetime in comparison with time switching (TS) and power splitting (PS) based protocols.
- 9 April 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 5 (4) , 2715-2728
A New Relay Policy in RF Energy Harvesting for IoT Networks—A Cooperative Network Approach
In this paper, a new RF energy harvesting policy is proposed for Internet of Things (IoT) networks using cooperative communication approach. The proposed policy is evaluated in three devices network which are source, relay and destination. Such a network model can be adopted in most IoT networks. Three scenarios are studied, where the relay has RF Energy Harvesting (RF-EH) capability with limited battery in all scenarios. However, the source has unlimited energy in the first scenario, but the limited energy in the second and third ones. In addition, in the third scenario source has RF-EH capability. New analyses based on Discrete Phase-Type Distribution (D-PHD) model as well as a Simple Analytical Method (SAM) are presented to derive performance metrics which are network effective lifetime, average delay of source/relay packets and source packets overflow. The effect of energy harvesting on such metrics are investigated to find the optimum relay policy. Results show that the proposed policy can maximize network effective lifetime in comparison with time switching (TS) and power splitting (PS) based protocols.