Mohammad Sadegh Fazel
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mohammad Sadegh Fazel has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Foroogh Sadat Tabataba
Department of Electrical and Computer Engineering, Isfahan University of Technology, Isfahan, Iran
3 shared publications - Mehdi Mahdavi
Department of Electrical and Computer Engineering, Isfahan University of Technology, Isfahan, Iran
3 shared publications - Farid Tabee Miandoab
Faculty of Electrical and Computer Engineering, University of Tabriz, Tabriz, Iran
2 shared publications - Halim Yanikomeroglu
Carleton University
2 shared publications Mehdi Naderi Soorki
Research Laboratory of Intelligent Wireless Networks (IWiN), Engineering Faculty, Shahid Chamran University of Ahvaz, Ahvaz, Iran
2 shared publications- Muhammad Ali Imran
James Watt School of Engineering, University of Glasgow, Glasgow G12 8QQ, UK
2 shared publications
Latest Publications
- Open Access
- 5 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Communications Society
- Vol. 6, 1895-1913
Enhancing Spectral Efficiency: The Impact of RIS Elements Association on Multi-User Cell-Free Wireless Networks
This paper proposes a hybrid mathematical method to optimize the association of reconfigurable intelligent surface (RIS) elements in cell-free wireless communication networks (CFWCN) assisted by multiple RISs, achieving maximum sum spectral efficiency (SSE). In the proposed approach the RIS elements are associated jointly with both access points (APs) and users equipment (UEs), addressing a previously unexplored aspect of RIS integration. Our proposed method incorporates the joint optimization of digital beamforming at the AP, analog beamforming at the RIS, association of RIS elements to UEs, and association of RIS elements to APs. It addresses the challenge of a mixed-integer non-convex problem through a combination of fractional programming (FP) and simulated annealing (SA) techniques. In this work, we also compare, for the first time, the performance of three elements association modes: association only with APs, association only with UEs, and joint association with both APs and UEs. Additionally, we investigate the impact of non-selective elements interference (NSEI) on RIS elements associations with both APs and UEs. We then expand our model to a more realistic one, incorporating spatial correlations both between AP antennas and among RIS elements. Simulation results show that our hybrid association approach outperforms the conventional methods for different channel models. Key findings include a 42% improvement in SSE when UEs are close to RISs. This enhancement is due to narrower beamformings achieved through optimized element categorization. The analysis reveals that optimal RIS element association with distant entities (APs or UEs) yields near-optimal performance.
- 5 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Communications Society
- Vol. 6, 1895-1913
Open AccessEnhancing Spectral Efficiency: The Impact of RIS Elements Association on Multi-User Cell-Free Wireless Networks
This paper proposes a hybrid mathematical method to optimize the association of reconfigurable intelligent surface (RIS) elements in cell-free wireless communication networks (CFWCN) assisted by multiple RISs, achieving maximum sum spectral efficiency (SSE). In the proposed approach the RIS elements are associated jointly with both access points (APs) and users equipment (UEs), addressing a previously unexplored aspect of RIS integration. Our proposed method incorporates the joint optimization of digital beamforming at the AP, analog beamforming at the RIS, association of RIS elements to UEs, and association of RIS elements to APs. It addresses the challenge of a mixed-integer non-convex problem through a combination of fractional programming (FP) and simulated annealing (SA) techniques. In this work, we also compare, for the first time, the performance of three elements association modes: association only with APs, association only with UEs, and joint association with both APs and UEs. Additionally, we investigate the impact of non-selective elements interference (NSEI) on RIS elements associations with both APs and UEs. We then expand our model to a more realistic one, incorporating spatial correlations both between AP antennas and among RIS elements. Simulation results show that our hybrid association approach outperforms the conventional methods for different channel models. Key findings include a 42% improvement in SSE when UEs are close to RISs. This enhancement is due to narrower beamformings achieved through optimized element categorization. The analysis reveals that optimal RIS element association with distant entities (APs or UEs) yields near-optimal performance.
- Open Access
- 28 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 179748-179763
Improving IoRT Networks: Cross-Tier Resource Allocation for Multi-Antenna UAV Relays in SAGIN
In response to reducing power consumption while reducing equipment and maintaining high data rate requirements in Space-Air-Ground Integrated Networks (SAGIN) as part of the Internet of Remote Things (IoRT) networks, this paper proposes a system model and optimization scheme. Our modified architecture features multi-antenna Unmanned Aerial Vehicle (UAV) relays, gateway selection among existing UAVs for communication with satellite, and integration of Free Space Optic (FSO) space links to enhance air-space link data rates. The optimization problem aims to minimize the weighted sum of the number of gateways and the total UAV power consumption by jointly optimizing UAV deployment, UAV power allocation, gateway selection, and channel allocation. By jointly adopting proposed size-constrained PSO-K-means clustering, Simulated Annealing (SA) method, and Successive Convex Approximation (SCA) method, a two-stage scheme is devised to solve the proposed NP-hard and non-convex problem. Our simulation results indicate that an average performance improvement of 44% is achieved by our proposed scheme compared to the case where only clustering is performed. Furthermore, our proposed solution finds the number of gateways for different scenarios. For instance, almost all UAVs are selected as gateways to minimize UAV power consumption without considering any constraint on the number of gateways. Moreover, the performance difference between considering total UAV power consumption and only transmission power in the system optimization is shown. The results indicate that taking circuit power into account influences the selection of the number of gateways, as circuit power consumption is substantially higher than transmission power.
- 28 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 179748-179763
Open AccessImproving IoRT Networks: Cross-Tier Resource Allocation for Multi-Antenna UAV Relays in SAGIN
In response to reducing power consumption while reducing equipment and maintaining high data rate requirements in Space-Air-Ground Integrated Networks (SAGIN) as part of the Internet of Remote Things (IoRT) networks, this paper proposes a system model and optimization scheme. Our modified architecture features multi-antenna Unmanned Aerial Vehicle (UAV) relays, gateway selection among existing UAVs for communication with satellite, and integration of Free Space Optic (FSO) space links to enhance air-space link data rates. The optimization problem aims to minimize the weighted sum of the number of gateways and the total UAV power consumption by jointly optimizing UAV deployment, UAV power allocation, gateway selection, and channel allocation. By jointly adopting proposed size-constrained PSO-K-means clustering, Simulated Annealing (SA) method, and Successive Convex Approximation (SCA) method, a two-stage scheme is devised to solve the proposed NP-hard and non-convex problem. Our simulation results indicate that an average performance improvement of 44% is achieved by our proposed scheme compared to the case where only clustering is performed. Furthermore, our proposed solution finds the number of gateways for different scenarios. For instance, almost all UAVs are selected as gateways to minimize UAV power consumption without considering any constraint on the number of gateways. Moreover, the performance difference between considering total UAV power consumption and only transmission power in the system optimization is shown. The results indicate that taking circuit power into account influences the selection of the number of gateways, as circuit power consumption is substantially higher than transmission power.
- 16 November 2024
- Published by Elsevier in Physical Communication
- Vol. 68
Dynamic energy efficient resource allocation in multi-user multi-IRS mmWave 6G networks
- 16 November 2024
- Published by Elsevier in Physical Communication
- Vol. 68
Dynamic energy efficient resource allocation in multi-user multi-IRS mmWave 6G networks
- 27 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 74 (2) , 2810-2825
Enhancing Connectivity and Transmission Robustness for Vehicular Communications Assisted by SGF NOMA and Full-Duplex Relaying
This paper merges the advantages of full-duplex (FD) multi-antenna cooperative relaying and non-orthogonal multiple access (NOMA)-aided semi-grant-free (SGF) transmission schemes to fulfill the requirements of lower latency, higher reliability and a greater number of connected devices in the vehicular networks. To achieve these objectives, a low complexity and cost-efficient hybrid NOMA-OMA-based resource allocation mechanism is introduced which can enhance network connectivity without aggravating interference. The hybrid successive-interference-cancellation (SIC) decoding method is utilized to improve transmission robustness. Additionally, a novel hybrid SIC decoding approach is specifically designed when the transmitted signals experience the same fading effects over a common channel transmission mode, i.e. the link between the relay and the base station (BS). We show that the FD relay-assisted vehicular communication system suffers from an outage probability error floor. Hence a modified zero-forcing (ZF) criterion-based transmit beamformer is designed to enhance the transmission robustness and eliminate the residual self-interference (SI) caused by FD operation. Moreover, a truncated Gaussian distribution is considered to model vehicle mobility. In order to minimize the line-of-sight (LoS) link obstruction phenomenon, the optimal vehicle speed is derived. Further, the exact and asymptotic outage probability expressions are derived, based on which the analysis of diversity order is provided. To validate the accuracy of our analytical results, Monte-Carlo simulations are conducted. Our results reveal that the hybrid SIC-based decoding scheme for SGF NOMA transmission provides a superior outage performance compared to the conventional NOMA transmission with the conventional SIC-based decoding scheme. Additionally, combining the hybrid SIC decoding method with the relay beamforming approach can eliminate the outage probability error floor while guaranteeing the quality of service (QoS) for the primary vehicle in the uplink FD cooperative vehicular communication system.
- 27 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 74 (2) , 2810-2825
Enhancing Connectivity and Transmission Robustness for Vehicular Communications Assisted by SGF NOMA and Full-Duplex Relaying
This paper merges the advantages of full-duplex (FD) multi-antenna cooperative relaying and non-orthogonal multiple access (NOMA)-aided semi-grant-free (SGF) transmission schemes to fulfill the requirements of lower latency, higher reliability and a greater number of connected devices in the vehicular networks. To achieve these objectives, a low complexity and cost-efficient hybrid NOMA-OMA-based resource allocation mechanism is introduced which can enhance network connectivity without aggravating interference. The hybrid successive-interference-cancellation (SIC) decoding method is utilized to improve transmission robustness. Additionally, a novel hybrid SIC decoding approach is specifically designed when the transmitted signals experience the same fading effects over a common channel transmission mode, i.e. the link between the relay and the base station (BS). We show that the FD relay-assisted vehicular communication system suffers from an outage probability error floor. Hence a modified zero-forcing (ZF) criterion-based transmit beamformer is designed to enhance the transmission robustness and eliminate the residual self-interference (SI) caused by FD operation. Moreover, a truncated Gaussian distribution is considered to model vehicle mobility. In order to minimize the line-of-sight (LoS) link obstruction phenomenon, the optimal vehicle speed is derived. Further, the exact and asymptotic outage probability expressions are derived, based on which the analysis of diversity order is provided. To validate the accuracy of our analytical results, Monte-Carlo simulations are conducted. Our results reveal that the hybrid SIC-based decoding scheme for SGF NOMA transmission provides a superior outage performance compared to the conventional NOMA transmission with the conventional SIC-based decoding scheme. Additionally, combining the hybrid SIC decoding method with the relay beamforming approach can eliminate the outage probability error floor while guaranteeing the quality of service (QoS) for the primary vehicle in the uplink FD cooperative vehicular communication system.
- 30 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (20) , 32546-32553
Improving Indoor Localization Using Mobile UWB Sensor and Deep Reinforcement Learning
Indoor localization has posed a significant challenge for researchers. Current methodologies predominantly rely on ultra-wideband (UWB) technology and selection of an appropriate number of anchor points to achieve precise accuracy at the centimeter level. However, the efficacy of these approaches can be compromised when anchor points are incorrectly positioned due to factors such as multi-path effects. Such misalignment can lead to signal power attenuation, thereby diminishing the overall accuracy of localization. In this paper, we propose a novel solution to address this issue. Our approach involves the utilization of deep reinforcement learning (DRL) to train a mobile UWB sensor in the identification of suitable anchor points. By leveraging DRL, we aim to mitigate the loss of transmitted signal power associated with unsuitable anchor placement. Subsequently, we conduct an evaluation to compare the performance of intelligently selected anchor points against two alternative strategies: anchor points selected with predefined constant positions and those chosen randomly. We employ the convolutional neural network (CNN) algorithm for this comparative analysis. Specifically, we utilize the received UWB signal time vector as input and predict the 2D target position using a CNN regressor to estimate the target location. Our simulation results demonstrate a significant improvement in localization accuracy when employing the DRL approach for anchor point selection. Specifically, the mean absolute error (MAE) achieved is approximately 0.09 m which represents a significant improvement compared to manual or random selection of anchor points, which provide MAEs of about 0.45 m and 1.20 m, respectively.
- 30 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (20) , 32546-32553
Improving Indoor Localization Using Mobile UWB Sensor and Deep Reinforcement Learning
Indoor localization has posed a significant challenge for researchers. Current methodologies predominantly rely on ultra-wideband (UWB) technology and selection of an appropriate number of anchor points to achieve precise accuracy at the centimeter level. However, the efficacy of these approaches can be compromised when anchor points are incorrectly positioned due to factors such as multi-path effects. Such misalignment can lead to signal power attenuation, thereby diminishing the overall accuracy of localization. In this paper, we propose a novel solution to address this issue. Our approach involves the utilization of deep reinforcement learning (DRL) to train a mobile UWB sensor in the identification of suitable anchor points. By leveraging DRL, we aim to mitigate the loss of transmitted signal power associated with unsuitable anchor placement. Subsequently, we conduct an evaluation to compare the performance of intelligently selected anchor points against two alternative strategies: anchor points selected with predefined constant positions and those chosen randomly. We employ the convolutional neural network (CNN) algorithm for this comparative analysis. Specifically, we utilize the received UWB signal time vector as input and predict the 2D target position using a CNN regressor to estimate the target location. Our simulation results demonstrate a significant improvement in localization accuracy when employing the DRL approach for anchor point selection. Specifically, the mean absolute error (MAE) achieved is approximately 0.09 m which represents a significant improvement compared to manual or random selection of anchor points, which provide MAEs of about 0.45 m and 1.20 m, respectively.
- 25 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 11 (10) , 2076-2079
Outage Analysis of Multiuser MIMO-NOMA Transmissions in Uplink Full-Duplex Cooperative System
This work merges the advantages of non-orthogonal-multiple-access (NOMA) and multi-antenna communication in a full-duplex (FD) uplink cooperative system, where two cellular users communicate with a base-station (BS). A cooperative FD relay is applied to assist the cell-edge user. To consider the effects of practical communications, interference links are regarded under imperfectly canceling mode. To remove the effect of interference signals at the BS, the zero-forcing (ZF) method is used. Outage probabilities are derived in closed-form. The simulation results reveal by applying ZF in BS and suppressing interference, FD mode achieves better outage performance than half-duplex (HD) in uplink cooperative multi-antenna NOMA communication.
- 25 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 11 (10) , 2076-2079
Outage Analysis of Multiuser MIMO-NOMA Transmissions in Uplink Full-Duplex Cooperative System
This work merges the advantages of non-orthogonal-multiple-access (NOMA) and multi-antenna communication in a full-duplex (FD) uplink cooperative system, where two cellular users communicate with a base-station (BS). A cooperative FD relay is applied to assist the cell-edge user. To consider the effects of practical communications, interference links are regarded under imperfectly canceling mode. To remove the effect of interference signals at the BS, the zero-forcing (ZF) method is used. Outage probabilities are derived in closed-form. The simulation results reveal by applying ZF in BS and suppressing interference, FD mode achieves better outage performance than half-duplex (HD) in uplink cooperative multi-antenna NOMA communication.
- 14 June 2022
- Published by Elsevier in Digital Signal Processing
- Vol. 128
A sequential MUSIC algorithm for scatterers detection in SAR tomography enhanced by a robust covariance estimator
- 14 June 2022
- Published by Elsevier in Digital Signal Processing
- Vol. 128
A sequential MUSIC algorithm for scatterers detection in SAR tomography enhanced by a robust covariance estimator
- Open Access
Improving Energy Efficiency of Massive MIMO Relay Systems using Power Bisection Allocation for Cell-Edge Users
This paper studies downlink energy efficiency (EE) of a cellular massive Multiple Input Multiple Output (MIMO) system with massive number of antennas at both base station (BS) and relay considering cell-edge users which is less investigated in the literature. Some improving methods for base station (BS) and relay power allocation under quality of service constraints are proposed. The EE optimization problem is provided over BS and relay power variables (power dimensions). Considering the quasi-concavity property of the EE function relative to each power variable, we propose to use a power bisection algorithm (PBA) in one dimension, followed by the exhaustive search in the other dimension (ODS algorithm) which is called PBODS algorithm and also a method to limit the range of power variables. The results show that the performance of the PBODS algorithm approaches the performance of optimal solution which is exhaustive search in both dimensions while it has a lower complexity. In addition to that we suggest to use the PBA in two dimensions alternatively as the sub-optimal alternative optimization (AOP) algorithm. The complexity can highly be reduced using the AOP algorithm with a slight but acceptable degradation in performance which makes the algorithm much suitable for practical use.
Open AccessImproving Energy Efficiency of Massive MIMO Relay Systems using Power Bisection Allocation for Cell-Edge Users
This paper studies downlink energy efficiency (EE) of a cellular massive Multiple Input Multiple Output (MIMO) system with massive number of antennas at both base station (BS) and relay considering cell-edge users which is less investigated in the literature. Some improving methods for base station (BS) and relay power allocation under quality of service constraints are proposed. The EE optimization problem is provided over BS and relay power variables (power dimensions). Considering the quasi-concavity property of the EE function relative to each power variable, we propose to use a power bisection algorithm (PBA) in one dimension, followed by the exhaustive search in the other dimension (ODS algorithm) which is called PBODS algorithm and also a method to limit the range of power variables. The results show that the performance of the PBODS algorithm approaches the performance of optimal solution which is exhaustive search in both dimensions while it has a lower complexity. In addition to that we suggest to use the PBA in two dimensions alternatively as the sub-optimal alternative optimization (AOP) algorithm. The complexity can highly be reduced using the AOP algorithm with a slight but acceptable degradation in performance which makes the algorithm much suitable for practical use.
- 25 November 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Communications
- Vol. 68 (2) , 902-914
Interference Alignment for One-Hop and Two-Hops MIMO Systems With Uncoordinated Interference
Providing higher data rate is a momentous goal for wireless communications systems, while interference is an important obstacle to reach this purpose. To cope with this problem, interference alignment (IA) has been proposed. In this paper, we propose two rank minimization methods to enhance the performance of IA in the presence of uncoordinated interference, i.e. , interference that cannot be properly aligned with the rest of the network and thus is a crucial issue. In this scenario, perfect and imperfect channel state information (CSI) cases are considered. Our proposed approaches employ the $l_{2}$ and the Schatten- $p$ norms to approximate the rank function, due to its non-convexity. Also, we propose a new convex relaxation to expand the feasible set of our optimization problem, providing lower rank solutions compared to other IA methods from the literature. In addition, we propose a modified weighted-sum method to deal with interference in the relay-aided MIMO interference channel, which employs a set of weighting parameters in order to find more solutions.
- 25 November 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Communications
- Vol. 68 (2) , 902-914
Interference Alignment for One-Hop and Two-Hops MIMO Systems With Uncoordinated Interference
Providing higher data rate is a momentous goal for wireless communications systems, while interference is an important obstacle to reach this purpose. To cope with this problem, interference alignment (IA) has been proposed. In this paper, we propose two rank minimization methods to enhance the performance of IA in the presence of uncoordinated interference, i.e. , interference that cannot be properly aligned with the rest of the network and thus is a crucial issue. In this scenario, perfect and imperfect channel state information (CSI) cases are considered. Our proposed approaches employ the $l_{2}$ and the Schatten- $p$ norms to approximate the rank function, due to its non-convexity. Also, we propose a new convex relaxation to expand the feasible set of our optimization problem, providing lower rank solutions compared to other IA methods from the literature. In addition, we propose a modified weighted-sum method to deal with interference in the relay-aided MIMO interference channel, which employs a set of weighting parameters in order to find more solutions.
- 1 October 2019
- Published by Elsevier in Signal Processing
- Vol. 163, 66-74
An energy-efficient joint antenna selection and power allocation for MIMO systems under limited feedback
- 1 October 2019
- Published by Elsevier in Signal Processing
- Vol. 163, 66-74
An energy-efficient joint antenna selection and power allocation for MIMO systems under limited feedback