MKMani Kashanianfard

Mani Kashanianfard

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Mani Kashanianfard has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Improved Single Target Calibration Technique for Polarimetric Radars

    by Kamal Sarabandi, Adib Y. Nashashibi, Mani Kashanianfard, Hussein N. Shaman

    In this article, an algorithm for calibrating polarimetric radar systems that ensures accurate measurements of complex scattering matrices of point targets in the backscatter direction is presented. In this approach, only a single target, namely, a metallic sphere, is needed as the calibration target, which significantly simplifies the calibration procedure and improves the accuracy. The error model for the polarimetric radar is based on an exact physics-based channel model for radars with dual-channel passive single antennas (Sarabandi and Ulaby, 1990). This article improves upon (Sarabandi and Ulaby, 1990) by allowing the crosstalk distortion matrices for the transmit and receive antennas to be different, thereby enabling polarimetric calibration of monostatic polarimetric radars with different transmit and receive antennas. The closed-form expressions for the calibrated elements of the scattering matrix of the unknown target in terms of the uncalibrated (measured) scattering matrices of both the unknown target and the calibration sphere are derived. The proposed calibration algorithm is validated experimentally using three different polarimetric radar systems operating at $X$ -, $W$ -, and $J$ -bands and using different point targets with known scattering matrices. Excellent agreements between the measurements and the expected theoretical/numerical results are demonstrated.


  • High-Resolution Polarimetric Radar for Autonomous Vehicle Research at W-Band Frequencies

    by Adib Y. Nashashibi, Tanner J. Douglas, Mani Kashanianfard, Stephen W. Decker, Kamal Sarabandi

    This paper presents a fully polarimetric instrumentation radar designed for conducting phenomenological studies in support of autonomous vehicle research at W-band frequencies. The compact radar utilizes a unique single-antenna system with a narrow beamwidth of 1.1° (two-way) and better than 45 dB isolation between the transmit and receive signal paths. It employs the frequency-modulated continuous-wave (FMCW) modulation scheme and operates over a maximum bandwidth of 5.5 GHz centered around 79.25 GHz. The radar benefits from a low phase noise level of -86 dBc/Hz at 10 kHz offset and its receiver channels have an effective noise figure value of 2.7 dB. The calibrated radar can be used to accurately measure the polarimetric response of both point and distributed targets. It can also generate high-resolution range-velocity maps of moving targets in a given traffic scene. The radar was used to characterize the polarimetric response of slow-moving targets, such as pedestrians and bicycles. The statistics of the radar cross-sections of these targets were computed, and unique features observed in the range-velocity maps of these targets were revealed.


  • Calibration of Wideband FMCW Polarimetric Radars Operating at Millimeter-Wave Frequencies

    by Adib Y. Nashashibi, Mani Kashanianfard, Kamal Sarabandi

    This article presents a comprehensive technique for calibrating wideband frequency-modulated continuous-wave (FMCW) fully polarimetric radars employing linear FM (LFM) signal chirps. A detailed system distortion model is developed that accounts for both polarimetric distortions and distortions caused by nonlinearities in the transmitted and received radar chirps over multiple polarization channels. Using the radar responses of two point targets at known distances from the radar, the calibration technique is able to estimate the range-dependent nonlinearities in phase and correct them for all targets at all ranges. This allows the radar to achieve its ideal range resolution. In addition, the calibration technique corrects for channel imbalances in the polarimetric radar using a metallic sphere of known diameter and any depolarizing target. Both numeric simulations and actual polarimetric radar measurements using a wideband FMCW radar operating over 76.5–82 GHz were used to validate the calibration technique.


  • A Mechanical Antenna With Frequency Multiplication and Phase Modulation Capability

    by Navid Barani, Mani Kashanianfard, Kamal Sarabandi

    This paper reports on a novel direct frequency multiplication and phase modulation scheme for mechanical antennas operating at the very-low frequency band (3-30 kHz) and lower. This antenna is intended as a transmitter for underwater and underground communication applications. In mechanical antennas, instead of using signal generators to drive the antenna for radiation, the radiation is induced by accelerating (rotating) electric charges or permanent magnets. One important challenge for mechanical antennas is to find an approach to modulate the information signal with sufficient bandwidth. We propose a novel phase modulation scheme by rotating a permanent magnet which is sandwiched between two pairs of orthogonal bow-tie shape high-μ magnetic material plates. By moving the angular position of the magnetic plates, it is shown that the phase and amplitude of the EM signal can be modulated. The amplitude modulation is significant and this provides an additional important feature, which allows the antenna to generate higher harmonics of the rotation frequency and thereby it facilitates radiation at a much higher frequency than the rotational frequency of the magnet. Hence, higher range and more radiated power can be achieved. Here, the performance of proposed mechanical antenna with its phase modulation and frequency multiplication capability is first verified analytically and through numerical simulations using ANSYS Maxwell. Then, a prototype of the antenna is fabricated with the aid of low cost 3D-printing technology and its performance is measured. Measurements are in good agreement with the simulation predictions.


  • A Polarimetric Active Transponder With Extremely Large RCS for Absolute Radiometric Calibration of SMAP Radar

    by Kamal Sarabandi, Mani Kashanianfard, Adib Y. Nashashibi, Leland E. Pierce, Ryan Hampton

    This paper presents a new single-antenna polarimetric active radar calibrator (PARC) intended for the polarimetric and absolute radiometric calibration of the NASA's soil moisture active passive (SMAP) radar. The PARC receives and retransmits the SMAP signal through a dual-polarized horn antenna with 17-dB gain at the center frequency of 1.26 GHz with 100 MHz of bandwidth. The transmit and receive polarizations are perpendicular and are isolated from each other using a precision orthomode transducer (OMT) specially designed for this application. The antenna is rotated 45° in the plane perpendicular to the direction of incidence, so that the scattering matrix of the PARC with respect to SMAP polarization coordinates has equal entries that enable radiometric calibration of all four channels simultaneously. As SMAP radar resolution is coarse (1 km), a point target with a very large radar cross section (RCS) is required to provide a high signal-to-clutter ratio. The proposed PARC can provide RCS values as high as 80 dBsm to achieve a 30-dB signal-to-clutter ratio. The PARC is controlled by a microcontroller to autonomously start minutes before the SMAP radar is expected to scan the area, stabilize the amplifier gain, record the magnitude of the pulses transmitted from the radar, and transmit these data to a base station. The design procedures of the OMT and the antenna, as well as control and RF circuits, are discussed, a number of leakage cancelation techniques are introduced to increase the isolation between the ports, the RCS of the fabricated PARC is fully characterized, and the image of the PARC as seen by SMAP is presented.


  • Vehicular Optically Transparent UHF Antenna for Terrestrial Communication

    by Mani Kashanianfard, Kamal Sarabandi

    This paper presents the design and fabrication of a wideband, optically transparent armor embedded antenna for ground communication in military vehicles at UHF and VHF bands. This unique design allows for unidirectional radiation and helps reduce the vehicle signature and other undesirable effects, such as air drag and cosite interference, while improving the gain. As a starting point, a bow-tie-shaped monopole antenna is placed in the window and is optimized to achieve the highest bandwidth possible. Monopole architecture is chosen to minimize the antenna size and tilt the beam to the horizontal plane for a slanted windshield. The geometry of the antenna is then modified by introducing stublike extensions and bent sections to achieve an octave bandwidth starting at 275 MHz. A special mesh compatible with nonuniform surface current density on the antenna is used for minimal antenna opacity. With this method, a 40% reduction in opacity compared with a uniformly meshed antenna is achieved. A prototype armor embedded antenna with unidirectional radiation pattern is fabricated and shown to provide 5-7 dBi of gain in the desired bandwidth as well as excellent optical functionality.


  • Directional Full-Duplex RF Booster for 2450 MHz ISM Band

    by Mani Kashanianfard, Kamal Sarabandi

    A directional repeater system with simple architecture composed of wideband receive and transmit antennas, a high gain low-power amplifier, and a bandpass filter is proposed for the 2450-MHz ISM band. The repeater system does not require down-conversion and up-conversion with frequency translation and does not rely on any operational protocol to manage users. As a result, the repeater (RF booster) can support all users, channels, modulation themes, and devices simultaneously. Close to 70 dB of isolation between the Tx and Rx antennas over the entire band (~100 MHz) is achieved for a compact structure with lateral dimensions of 8 cm × 12 cm and thickness of 1 cm. The isolation between the Tx and Rx antennas is achieved using polarization mismatch between orthogonal double-stack patch antennas and a novel two-element Rx antenna whose elements are appropriately located with respect to the Tx antenna to cancel the signal leakage from the Tx antenna to the Rx antennas. Two types of repeaters, one utilizing only the ground plane and polarization mismatch, and the second using the two-element Rx antenna in addition to polarization mismatch, are fabricated and tested in different environments. It is shown that more than 30 dB improvement in coverage can be achieved.