MAMarco Allegretti

Marco Allegretti

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Marco Allegretti has a total of 57 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A new class of orbiting very large ultra-light orientable mw antennas in low earth orbits

    by Giovanni Perona, Angelo Raffaele Meo, Marco Allegretti, Isabella Bordi, Elena Marengo, Bruno Mazzetti, Mario Scovazzi

    The purpose of the following proposal is to create a new class of antennas of low weight but with a large transmitting and receiving surface made of metallized fabric. This class of antennas will be stationed in low satellite orbits, at about 2000 km from sea level and will be easily steerable by exploiting the interaction between the earth's magnetic field and an electromagnetic field generated on the antenna. The possibility of orienting very large ultra-light balloon-like MW antennas, orbiting in the Earth magnetic field, through electric currents flowing in conductive wires embedded in the antennas walls, are examined. It is shown that such currents may easily provide the needed forces without the necessity of mechanically orienting the antenna itself. The antenna is extremely light, inexpensive, easily directional. The antenna has the shape of a spheroid in which the southern hemisphere has a parabolic shape made of metallized fabric; the northern hemisphere, transparent to the electromagnetic radiation, has a radius of curvature such that the north pole coincides with the focus of the parabola.

  • Open Access

    Innovative Mini Ultralight Radioprobes to Track Lagrangian Turbulence Fluctuations within Warm Clouds: Electronic Design

    by Miryam E. Paredes Quintanilla, Shahbozbek Abdunabiev, Marco Allegretti, Andrea Merlone, Chiara Musacchio, Eros G. A. Pasero, Daniela Tordella, Flavio Canavero

    Characterization of dynamics inside clouds remains a challenging task for weather forecasting and climate modeling as cloud properties depend on interdependent natural processes at micro- and macro-scales. Turbulence plays an important role in particle dynamics inside clouds; however, turbulence mechanisms are not yet fully understood partly due to the difficulty of measuring clouds at the smallest scales. To address these knowledge gaps, an experimental method for measuring the influence of small-scale turbulence in cloud formation in situ and producing an in-field cloud Lagrangian dataset is being developed by means of innovative ultralight radioprobes. This paper presents the electronic system design along with the obtained results from laboratory and field experiments regarding these compact (diameter ≈30 cm), lightweight (≈20 g), and expendable devices designed to passively float and track small-scale turbulence fluctuations inside warm clouds. The fully customized mini-radioprobe board (5 cm × 5 cm) embeds sensors to measure local fluctuations and transmit data to the ground in near real time. The tests confirm that the newly developed probes perform well, providing accurate information about atmospheric turbulence as referenced in space. The integration of multiple radioprobes allows for a systematic and accurate monitoring of atmospheric turbulence and its impact on cloud formation.


  • Open Access

    Progress on the development of innovative, floating, biodegradable radio- probes for atmospheric monitoring inside warm clouds

    by Miryam Paredes, Shahbozbek Abdunabiev, Marco Allegretti, Giovanni Perona, Daniela Tordella, Eros Pasero, Flavio Canavero, Andrea Merlone, Chiara Musacchio

    Characterization of clouds is still a challenging task for weather forecasting and climate modeling. This is because clouds depend on interdisciplinary natural processes, ranging from the micrometer scale, where particles and droplets collide, to the thousand-of-meters scale of airflow dynamics. Turbulence has an important role in cloud formation and rain initiation since it helps rain droplets to evolve through coalescence and collision processes. Unfortunately, the effects of turbulence mechanisms are not yet well understood and there remains a need for further clarification. In an attempt to address these knowledge gaps, this work presents the advances of an experimental method for measuring in-situ the influence of turbulence in cloud formation and producing an infield cloud Lagrangian dataset by means of the development of ultra-light bio- compatible radio-probes. With a target weight of less than 20 grams, these innovative devices are carefully designed to float and passively track small-scale turbulence fluctuations in warm clouds and neighboring air. Each mini radio-probe embeds a set of compact size microprocessors, controllers and sensors for the measurement of atmospheric parameters inside clouds (e.g. velocity, acceleration, vorticity, pressure, temperature, humidity) after been released into the atmosphere. To reach a buoyancy force equal to the weight of the system, the bio balloons containing the electronics are appropriately filled with a mixture of helium gas and air. During the flight, the smart radio-probes acquire, pre-process, store, arrange and transmit the obtained data to different receiving and ground stations located on earth through a dedicated radio transmission link. Due to the radio-probes’ physical constrains and the environmental conditions that can be found inside warm clouds, a power-saving and long-range wireless communication technology has been selected and tested. The development of the first operational prototypes for both, the radio-probes and the receiving stations, are presented together with results of the first measurement experiments both, in laboratory and field campaign.

  • Propagation measurements for a LoRa network in an urban environment

    by Miryam Paredes, Silvano Bertoldo, Lorenzo Carosso, Claudio Lucianaz, Emanuele Marchetta, Marco Allegretti, Patrizia Savi

    LoRa is a relatively new proprietary communication technology that allows long-range communication distances while consuming very little power. It utilizes license-free Industrial, Scientific and Medical ISM frequency bands to exchange information at low data rates. LoRa is favourable when looking for limited exchange of data and low-cost devices and infrastructure. This work presents some preliminary propagation measurements in a typical urban environment by using prototype transmitters and receivers working in a private network. Results highlight that LoRa can be used as a communication technology for different ad-hoc networks deployed in an urban area.


  • Open Access

    Feasibility Analysis of a LoRa-Based WSN Using Public Transport

    by Silvano Bertoldo, Lorenzo Carosso, Emanuele Marchetta, Miryam Paredes, Marco Allegretti

    LoRa (Long Range) is a proprietary radio communication technology exploiting license-free frequency bands, allowing low-rate information exchange over long distances with very low power consumption. Conventional environmental monitoring sensors have the disadvantage of being in fixed positions and distributed over wide areas, thus providing measurements with a spatially insufficient level of detail. Since public transport vehicles travel continuously within cities, they are ideal to house portable monitoring systems for environmental pollution and meteorological parameters. The paper presents a feasibility analysis of a Wireless Sensor Network (WSN) to collect this information from the vehicles conveying it to a central node for processing. The communication system is realized by deploying a layer-structured, fault-resistant, multi-hop Low Power Wide Area Network (LPWAN) based on the LoRa technology. Both a theoretical study about electromagnetic propagation and network architecture are addressed with consideration of potential practical network realization.


  • Open Access

    A LoRa-based distributed network for environmental monitoring using public transport

    by Silvano Bertoldo, Lorenzo Carosso, Emanuele Marchetta, Miryam Paredes, Marco Allegretti, Patrizia Savi

    LoRa is a proprietary radio communication technology exploiting license-free frequency bands, allowing low-rate information exchange over long distances with very low-power consumption. Conventional environmental monitoring sensors have the disadvantage of being in fixed positions and distributed over wide areas, thus providing measurements with spatially insufficient level of detail. Since public transport vehicles travel continuously within cities, they are ideal to house portable monitoring systems for environmental pollution and meteorological parameters. The paper presents a system to collect this information from the vehicles conveying it to a central node for processing. The communication system is realized by deploying a layer-structured, fault-resistant, multi-hop Low Power Wide Area Network (LPWAN) based on the LoRa technology. For experimental purposes, in order to simulate the behaviour of the sensors along the track of the vehicle, some measurements in a noisy urban environment have been performed to evaluate the useful communication ranges and any possible loss of information


  • Open Access

    A New Modular Control Board for Pulse-Jet Cleaning of Dust Collector Filter Bags

    by L. Carosso, D. Gaiki, S. Bertoldo, M. Allegretti

    This work presents a timing system modular control board to be used for pulse-jet cleaning of dust collector filter bags or pneumatic conveying systems. Many systems of this kind are already available on the market but only some of them have the ability to operate in full range alternating current power supplies. The presented versatile and innovative control board can control the electro valves, either the ones operating with alternating current and those in direct current (since they are both used in the industrial plants). For the same reason, the designed prototype system can be powered with different voltages, widening the number of potential industrial applications. The electronic board has as main advantage the ability to fully automate the cleaning cycle. It can drive many electro valves simultaneously since it is possible to connect more control boards together if needed. It also allows the user to separate the control section of the system from the section dedicated to the actuation of the electro valves. The electro valves can be controlled from a PC terminal via ethernet. The work describes the adopted solutions and the steps made for the design of the entire prototypal modular board, with particular focus on the innovative timing system.


  • Open Access

    On the Use of a 77 GHz Automotive Radar as a Microwave Rain Gauge

    by S. Bertoldo, C. Lucianaz, M. Allegretti

    The European Telecommunications Standards Institute (ETSI) defines the frequency band of 77 GHz (W-band) as the one dedicated to automatic cruise control long-range radars. A car can be thought as a moving integrated weather sensor since it can provide meteorological information exploiting the sensors installed on board. This work presents the preliminary analysis of how a 77 GHz mini radar can be used as a short range microwave rain gauge. After the discussion of the Mie scattering formulation applied to a microwave rain gauge working in the W-band, the proposal of a new Z-R equation to be used for correct rain estimation is given. Atmospheric attenuation and absorption are estimated taking into account the ITU-T recommendations. Functional requirements in adapting automatic cruise control long-range radar to a microwave rain gauge are analyzed. The technical specifications are determined in order to meet the functional requirements.


  • A new wireless sensor network module for health monitoring of civil structures

    by L. Carosso, M. Allegretti, S. Bertoldo

    The work presents the results of a project concerning the study and the prototypal realization of an innovative low cost module for Structural Health Monitoring (SHM) that would allow the measurement of internal displacements inside civil structures. A set of these sensors could also be part of wide Wireless Sensor Network (WSN). The basic working principle of the sensor is the Hall Effect. This effect is the result of a magnetic field applied to a conductor, which moves the electrons toward one of the extremes of the conductor itself generating an electric signal. The Hall Effect sensor measures the voltage variation, due to the variation in the distance between two equal sensors inserted in the structure undergoing deformation. The description of the sensor is given together with the explanation of its possible installation mode. Test results are presented with the discussion of possible practical use of sensors.


  • Car as a moving meteorological integrated sensor

    by S. Bertoldo, C. Lucianaz, M. Allegretti

    Nowadays, common cars are equipped with set of sensors, systems and technologies commonly used to improve car and passengers' safety and comfort. These cars are often referred to with the innovative conception of “car as a sensor”. A car can be also thought as a moving integrated weather sensor since it can provide meteorological information along specific tracks, exploiting all the information acquired by the installed sensors processed by specific ad-hoc software and technologies. The paper will present an analysis of the sensor installed on car with a panoramic of the software and technologies that can be used to use the car as integrated moving sensor for meteorological purposes, including also some communications techniques. The descriptions of some activities are presented, some technical points are addressed and some examples of applications are reported.