Claudio Lucianaz
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Claudio Lucianaz has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
- Marco Allegretti
Department of Electronics and Telecommunications, Politecnico di Torino, Italy
20 shared publications - Silvano Bertoldo
Department of Electronics and Telecommunications, Politecnico di Torino, Italy
19 shared publications O. Rorato
Dipartimento di Elettronica e Telecomunicazioni, Politecnico di Torino, Italy
6 shared publicationsG. Greco
Consorzio Interuniversitario Nazionale per la Fisica delle Atmosfere e delle Idrosfere (CINFAI), unità locale c/o DET, Politecnico di Torino, C.so Duca degli Abruzzi 24, 10129, Italy
5 shared publicationsGiovanni Perona
4 shared publicationsG. Perona
Politecnico di Torino (Italy)
3 shared publications
Latest Publications
- 4 September 2019
- Published by Taylor & Francis in Journal of Electromagnetic Waves and Applications
- Vol. 33 (15) , 2022-2036
Propagation measurements for a LoRa network in an urban environment
LoRa is a relatively new proprietary communication technology that allows long-range communication distances while consuming very little power. It utilizes license-free Industrial, Scientific and Medical ISM frequency bands to exchange information at low data rates. LoRa is favourable when looking for limited exchange of data and low-cost devices and infrastructure. This work presents some preliminary propagation measurements in a typical urban environment by using prototype transmitters and receivers working in a private network. Results highlight that LoRa can be used as a communication technology for different ad-hoc networks deployed in an urban area.
- 4 September 2019
- Published by Taylor & Francis in Journal of Electromagnetic Waves and Applications
- Vol. 33 (15) , 2022-2036
Propagation measurements for a LoRa network in an urban environment
LoRa is a relatively new proprietary communication technology that allows long-range communication distances while consuming very little power. It utilizes license-free Industrial, Scientific and Medical ISM frequency bands to exchange information at low data rates. LoRa is favourable when looking for limited exchange of data and low-cost devices and infrastructure. This work presents some preliminary propagation measurements in a typical urban environment by using prototype transmitters and receivers working in a private network. Results highlight that LoRa can be used as a communication technology for different ad-hoc networks deployed in an urban area.
- 1 October 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 357-360
Feasibility Study of LoRa Ad-Hoc Network in an Urban Noisy Environment
LoRa is a proprietary radio communication technology exploiting license-free frequency bands. It allows low-rate information exchange with a very low-power consumption. LoRa is very convenient when the amount of transmitted data is limited and when a low cost infrastructure is required. This work presents some preliminary propagation measurements in a noisy urban environment by using prototypal transmitters and receivers as network nodes. Results highlights that LoRa can be used for different ad-hoc networks deployed on an urban area.
- 1 October 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 357-360
Feasibility Study of LoRa Ad-Hoc Network in an Urban Noisy Environment
LoRa is a proprietary radio communication technology exploiting license-free frequency bands. It allows low-rate information exchange with a very low-power consumption. LoRa is very convenient when the amount of transmitted data is limited and when a low cost infrastructure is required. This work presents some preliminary propagation measurements in a noisy urban environment by using prototypal transmitters and receivers as network nodes. Results highlights that LoRa can be used for different ad-hoc networks deployed on an urban area.
- Open Access
- 20 February 2018
- Published by Engineering, Technology & Applied Science Research in Engineering, Technology & Applied Science Research
- Vol. 8 (1) , 2356-2360
On the Use of a 77 GHz Automotive Radar as a Microwave Rain Gauge
The European Telecommunications Standards Institute (ETSI) defines the frequency band of 77 GHz (W-band) as the one dedicated to automatic cruise control long-range radars. A car can be thought as a moving integrated weather sensor since it can provide meteorological information exploiting the sensors installed on board. This work presents the preliminary analysis of how a 77 GHz mini radar can be used as a short range microwave rain gauge. After the discussion of the Mie scattering formulation applied to a microwave rain gauge working in the W-band, the proposal of a new Z-R equation to be used for correct rain estimation is given. Atmospheric attenuation and absorption are estimated taking into account the ITU-T recommendations. Functional requirements in adapting automatic cruise control long-range radar to a microwave rain gauge are analyzed. The technical specifications are determined in order to meet the functional requirements.
- 20 February 2018
- Published by Engineering, Technology & Applied Science Research in Engineering, Technology & Applied Science Research
- Vol. 8 (1) , 2356-2360
Open AccessOn the Use of a 77 GHz Automotive Radar as a Microwave Rain Gauge
The European Telecommunications Standards Institute (ETSI) defines the frequency band of 77 GHz (W-band) as the one dedicated to automatic cruise control long-range radars. A car can be thought as a moving integrated weather sensor since it can provide meteorological information exploiting the sensors installed on board. This work presents the preliminary analysis of how a 77 GHz mini radar can be used as a short range microwave rain gauge. After the discussion of the Mie scattering formulation applied to a microwave rain gauge working in the W-band, the proposal of a new Z-R equation to be used for correct rain estimation is given. Atmospheric attenuation and absorption are estimated taking into account the ITU-T recommendations. Functional requirements in adapting automatic cruise control long-range radar to a microwave rain gauge are analyzed. The technical specifications are determined in order to meet the functional requirements.
- 1 September 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 53-56
Car as a moving meteorological integrated sensor
Nowadays, common cars are equipped with set of sensors, systems and technologies commonly used to improve car and passengers' safety and comfort. These cars are often referred to with the innovative conception of “car as a sensor”. A car can be also thought as a moving integrated weather sensor since it can provide meteorological information along specific tracks, exploiting all the information acquired by the installed sensors processed by specific ad-hoc software and technologies. The paper will present an analysis of the sensor installed on car with a panoramic of the software and technologies that can be used to use the car as integrated moving sensor for meteorological purposes, including also some communications techniques. The descriptions of some activities are presented, some technical points are addressed and some examples of applications are reported.
- 1 September 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 53-56
Car as a moving meteorological integrated sensor
Nowadays, common cars are equipped with set of sensors, systems and technologies commonly used to improve car and passengers' safety and comfort. These cars are often referred to with the innovative conception of “car as a sensor”. A car can be also thought as a moving integrated weather sensor since it can provide meteorological information along specific tracks, exploiting all the information acquired by the installed sensors processed by specific ad-hoc software and technologies. The paper will present an analysis of the sensor installed on car with a panoramic of the software and technologies that can be used to use the car as integrated moving sensor for meteorological purposes, including also some communications techniques. The descriptions of some activities are presented, some technical points are addressed and some examples of applications are reported.
- 1 September 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 49-52
77 GHz automotive anti-collision radar used for meteorological purposes
An always-growing number of cars are equipped with radars, mainly used for drivers and passengers' safety. In particular, according to European Telecommunications Standards Institute (ETSI) one specific frequency band is dedicated to automatic cruise control long-range radar operating around 77 GHz (W-band). After the discussion of the Mie scattering formulation applied to a weather radar working in the W-band, the proposal of a new Z-R equation to be used for correct rain estimation is given. Functional requirements to adapt an automatic cruise control long-range radar to a mini-weather radar are analyzed and the technical specifications are evaluated. Results provide the basis for the use of a 77 GHz automotive anti-collision radar for meteorological purposes.
- 1 September 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 49-52
77 GHz automotive anti-collision radar used for meteorological purposes
An always-growing number of cars are equipped with radars, mainly used for drivers and passengers' safety. In particular, according to European Telecommunications Standards Institute (ETSI) one specific frequency band is dedicated to automatic cruise control long-range radar operating around 77 GHz (W-band). After the discussion of the Mie scattering formulation applied to a weather radar working in the W-band, the proposal of a new Z-R equation to be used for correct rain estimation is given. Functional requirements to adapt an automatic cruise control long-range radar to a mini-weather radar are analyzed and the technical specifications are evaluated. Results provide the basis for the use of a 77 GHz automotive anti-collision radar for meteorological purposes.
- 1 June 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-8
Preliminary analysis to design a 77 GHz weather radar
- 1 June 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-8
Preliminary analysis to design a 77 GHz weather radar
- 19 October 2016
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10001, 1000104-1000104-9
Disposable falling sensors to monitor atmospheric parameters
Detailed studies and researches about clouds and precipitations characterization are considered to play a key role in weather and strong events prediction. Most monitoring instruments perform indirect monitoring operation, sensing the parameters from a remote position and not being directly inside the phenomenon. A feasibility analysis of a set of disposable sensors is presented. The very light sensors are planned to be dropped by a plane or a UAV (Unmanned Aerial Vehicle) in the atmosphere and are designed to dynamically behave as very light particles similar to raindrops in their fluctuations and falling through the atmosphere. In order to realize sensing probes with a similar fluid-dynamic behavior of drops, the weight, the size and the surface properties of the probes should be carefully designed. An estimated size of the order of many centimeters and a total weight of less than 15 g is needed. Consequently particular attention has to be paid in designing electronic boards and in the choice of integrated measurement sensors as well as the transmitter. Minimum power consumption should be also guaranteed, in order to assure the proper working during the fluctuating and falling time. Sensors installed on the sensing probe will measure different atmospheric parameters (e.g. humidity, temperature, pressure, acceleration) with a sampling interval of the order of some milliseconds. All data are then sent to a receiver located on the ground and can then be stored and post processed for further analysis
- 19 October 2016
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10001, 1000104-1000104-9
Disposable falling sensors to monitor atmospheric parameters
Detailed studies and researches about clouds and precipitations characterization are considered to play a key role in weather and strong events prediction. Most monitoring instruments perform indirect monitoring operation, sensing the parameters from a remote position and not being directly inside the phenomenon. A feasibility analysis of a set of disposable sensors is presented. The very light sensors are planned to be dropped by a plane or a UAV (Unmanned Aerial Vehicle) in the atmosphere and are designed to dynamically behave as very light particles similar to raindrops in their fluctuations and falling through the atmosphere. In order to realize sensing probes with a similar fluid-dynamic behavior of drops, the weight, the size and the surface properties of the probes should be carefully designed. An estimated size of the order of many centimeters and a total weight of less than 15 g is needed. Consequently particular attention has to be paid in designing electronic boards and in the choice of integrated measurement sensors as well as the transmitter. Minimum power consumption should be also guaranteed, in order to assure the proper working during the fluctuating and falling time. Sensors installed on the sensing probe will measure different atmospheric parameters (e.g. humidity, temperature, pressure, acceleration) with a sampling interval of the order of some milliseconds. All data are then sent to a receiver located on the ground and can then be stored and post processed for further analysis
- 1 September 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 480-483
Localization of RFID tags for environmental monitoring using UAV
The paper presents the experimental implementation of a method to localize RFID tags in an outdoor environment using UAV. During the installation phase, it is possible to measure the coordinates of the installation point using a topographic GNSS receiver. The tags positions can evolve with time and after a specific desired period of time (e. g. 1 month or 1 year) it is necessary to relocate them. This can be done estimating the distance between the tags and a UAV, exploiting the measurements of the Received Signal Strength Indicator (RSSI). The tags are placed over an outdoor test area and a large amount of RSSI measurements are made in different position, well distributed in space, using a UAV equipped with a specific tag reader. On such data, a multilateration-based localization algorithm is applied achieving good results. The description of RFID tags is reported together with the localization algorithm, the test description and the preliminary results.
- 1 September 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 480-483
Localization of RFID tags for environmental monitoring using UAV
The paper presents the experimental implementation of a method to localize RFID tags in an outdoor environment using UAV. During the installation phase, it is possible to measure the coordinates of the installation point using a topographic GNSS receiver. The tags positions can evolve with time and after a specific desired period of time (e. g. 1 month or 1 year) it is necessary to relocate them. This can be done estimating the distance between the tags and a UAV, exploiting the measurements of the Received Signal Strength Indicator (RSSI). The tags are placed over an outdoor test area and a large amount of RSSI measurements are made in different position, well distributed in space, using a UAV equipped with a specific tag reader. On such data, a multilateration-based localization algorithm is applied achieving good results. The description of RFID tags is reported together with the localization algorithm, the test description and the preliminary results.
- 1 September 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 157-160
Extreme rain events analysis using X-band weather radar
The X-band radar installed in Turin was used to analyze extreme events. About 3 years of radar maps have been analyzed in comparisons with about 30 years of measurements made by rain gauges located in the same area. The entire monitored area was divided into 4 subareas considering the complex orography near Turin, namely the flatlands, mountains, hills and urban areas. For each subarea, the Generalized Extreme Values (GEV) distributions are estimated considering rain gauges data and X-band radar maps. Radar maps are properly processed to be comparable with rain gauges measurements considering reference areas of different size centered over each available gauge. It is shown that a limited temporal availability of X-band radar maps can be sufficient to obtain a good GEV distribution estimation, and that X-band weather radars are a good instrument to analyze extreme rain events where a dense rain gauge network is not available.
- 1 September 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 157-160
Extreme rain events analysis using X-band weather radar
The X-band radar installed in Turin was used to analyze extreme events. About 3 years of radar maps have been analyzed in comparisons with about 30 years of measurements made by rain gauges located in the same area. The entire monitored area was divided into 4 subareas considering the complex orography near Turin, namely the flatlands, mountains, hills and urban areas. For each subarea, the Generalized Extreme Values (GEV) distributions are estimated considering rain gauges data and X-band radar maps. Radar maps are properly processed to be comparable with rain gauges measurements considering reference areas of different size centered over each available gauge. It is shown that a limited temporal availability of X-band radar maps can be sufficient to obtain a good GEV distribution estimation, and that X-band weather radars are a good instrument to analyze extreme rain events where a dense rain gauge network is not available.
- 1 September 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1152-1154
Real time outdoor localization of buried RFID tags through statistical methods
The problem that we have addressed with the presented study is the absolute localization of buried RFID tags in an outdoor environment where the tag is. This is the scenario that we have envisaged when the RFID sensors are installed inside a moving body like a glacier or a slow landslide. During the tags dislocation it is possible to measure the depth of the installation and to define the absolute coordinate of the installation points using a topographic GNSS receiver. Afterwards the body evolves with time, moves and after a while (e. g. 1 month, 1 year) it is necessary to locate the sensors in order to quantify the absolute movement. To find the new location we have decided to investigate a multilateration-based localization technique. In this paper we describe the approach to develop a low cost system for the reading of the tags and for their localization without the need of expensive radar systems (e. g. GPR) to locate them.
- 1 September 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1152-1154
Real time outdoor localization of buried RFID tags through statistical methods
The problem that we have addressed with the presented study is the absolute localization of buried RFID tags in an outdoor environment where the tag is. This is the scenario that we have envisaged when the RFID sensors are installed inside a moving body like a glacier or a slow landslide. During the tags dislocation it is possible to measure the depth of the installation and to define the absolute coordinate of the installation points using a topographic GNSS receiver. Afterwards the body evolves with time, moves and after a while (e. g. 1 month, 1 year) it is necessary to locate the sensors in order to quantify the absolute movement. To find the new location we have decided to investigate a multilateration-based localization technique. In this paper we describe the approach to develop a low cost system for the reading of the tags and for their localization without the need of expensive radar systems (e. g. GPR) to locate them.