PHPeter Hoffmann

Peter Hoffmann

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Peter Hoffmann has a total of 142 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    CORDEX Flagship Pilot Study URB-RCC: Urban Environments and Regional Climate Change

    by Tomas Halenka, Gaby Langendijk, Peter Hoffmann, Michal Belda, Natalia Machado-Crespo

    Cities play fundamental role in climate at local to regional scales through modification of heat and moisture fluxes, as well as affecting local atmospheric chemistry and composition, alongside air-pollution dispersion. Vice versa, regional climate change impacts urban areas and will affect cities and citizens increasingly in the next decades when the population in urban areas is growing projected to reach 70 % by 2050. This is critical in connection to extreme events, e.g. heat waves with extremely high temperatures exacerbated by the urban heat island effect, in particular during night-time, with significant consequences for human health.Recent RCM development achieved resolution of city scales within convection permitting RCMs, parameterization of urban processes thus becomes more important. From the framework of CORDEX FPS, main aims and progress of FPS URB-RCC will be presented, from the results based on previous available simulations to the results of analysis of Stage-0 experiments using case studies of heat wave, within ensemble of about 40 simulations for Paris with CP RCMs. This experiment shows the effects of different implementation of urban parameterizations as well as of the different models and their settings on urban heat island under the heat wave. Further outlook of long term (10 years – Stage 1 experiment) climate simulation with these models in common strategy of IMPETUS4CHANGE Horizon Europe Project will be presented. The development of Global Satellite Cities experiment with similar experiments for other big cities around the world will be introduced as another part of Stage 1 experiment. Clear emphasis is given to urban heat island, with possibility to compare the signal for different types of megacities.Acknowledgement: Project I4C (Impetus4Change), has been funded by the European Union with funding from the European Union’s Horizon Europe Research and Innovation Action under grant agreement No. 101081555.

  • Open Access

    CORDEX Flagship Pilot Study URB-RCC: Urban Environments and Regional Climate Change

    by Tomas Halenka, Gaby Langendijk, Peter Hoffmann, Michal Belda, Natália Crespo

    Cities play fundamental role in climate at local to regional scales through modification of heat and moisture fluxes, as well as affecting local atmospheric chemistry and composition, alongside air-pollution dispersion. Vice versa, regional climate change impacts urban areas and will affect cities and citizens increasingly in the next decades when the population in urban areas is growing projected to reach 70 % by 2050. This is critical in connection to extreme events, e.g. heat waves with extremely high temperatures exacerbated by the urban heat island effect, in particular during night-time, with significant consequences for human health.Recent RCM development achieved resolution of city scales within convection permitting RCMs, parameterization of urban processes thus becomes more important. From the framework of CORDEX FPS, main aims and progress of FPS URB-RCC will be presented, especially the results of analysis of Stage-0 experiments using case studies of heat wave and convection episode within ensemble of about 40 simulations for Paris with CP RCMs. This experiment shows the effects of different implementation of urban parameterizations as well as of the different models and their settings on urban heat island under the heat wave, for convection case there is hard to analyse significant signal. Further outlook of long term (10 years – Stage 1 experiment) climate simulation with these models in common strategy to IMPETUS4CHANGE Horizon Europe Project will be presented. The development of Global Satellite Cities experiment with similar experiments for other big cities around the world will be introduced as another part of Stage 1 experiment.

  • Open Access

    Can measurement and reanalysis data act as suitable forcing data for neighborhood-level PALM-4U simulations?

    by Leo Luca Loprieno, Peter Hoffmann, Sabine Fritz, Jana Sillmann

    In light of increasingly intense heat waves threatening various regions around the globe, densely built urban environments are vulnerable to elevated heat stress values. Large-eddy simulations like the obstacle-resolving model PALM-4U act as suitable tools to quantify urban heat stress on the neighborhood- to street-level due to their ability to resolve small-scale variability of atmospheric variables. PALM-4U simulations must be forced with vertical profiles, either as initial profiles or as dynamic profiles adapted from mesoscale models. However, the use of the latter can potentially introduce some model biases into the urban climate model, affecting the representation of the boundary layer. Furthermore, mesoscale model simulations might not always be available at a certain location at a specific time. This favors the use of observation-informed data products as driving data. This study presents the performance of a set of PALM-4U simulations forced with various initial vertical atmospheric and soil profiles in simulating 2m-air temperature at different grid spacings for a densely populated city quarter within the Hamburg-Altona district in northern Germany. Furthermore, the ability to simulate the variability of heat stress indices and other thermal comfort-related measures is investigated. Three different atmospheric forcing profiles are employed: (i) an observation-based profile constructed by merging data from the Hamburg Weathermast with CERRA and ERA5 reanalysis data, (ii) a reanalysis-based profile constructed by merging data from CERRA and ERA5 reanalysis, and (iii) a profile based on ERA5 reanalysis data only. Soil parameters were taken from CERRA-Land reanalysis. Simulations were conducted at horizontal grid spacings of 8m, 4m, and 2m for a heatwave day that stands out against other summer days regarding the near-surface air temperature. The evaluation was performed against measurements of three weather stations, which had been set up during a field campaign in the months June-August 2020 in Hamburg, Germany, and are located within the modelling domain. This study answers the question whether reanalysis data provide a suitable base for forcing PALM-4U simulations. This would allow realistic forcing profiles to be constructed over domains with little observational or mesoscale model data availability.

  • Open Access

    REMO2020: a modernised modular regional climate model

    by Joni-Pekka Pietikäinen, Kevin Sieck, Lars Buntemeyer, Thomas Frisius, Christine Nam, Peter Hoffmann, Christina Pop, Diana Rechid, Daniela Jacob

    This paper introduces REMO2020, a modernised version of the well-known and widely used REgional climate MOdel (REMO). REMO2020 has undergone fundamental changes in its code structure to provide a more modular, operationally focused design, facilitating the inclusion of new components and updates. Here, we describe the default configuration of REMO2020, which includes the following updates compared to the previous version, REMO2015: (i) the FLake lake model, (ii) a state-of-the-art MACv2-SP aerosol climatology, (iii) a newly developed three-layer snow module, (iv) a prognostic precipitation scheme, (v) an updated time filter, and (vi) a new tuning approach. Additionally, we describe some optional modules that can be activated separately, such as the interactive MOsaic-based VEgetation model iMOVE. REMO2020 outperforms its predecessor REMO2015 with regard to nearly all evaluation metrics used to evaluate simulations of Europe's climate. The persistent warm-temperature bias over central Europe and the cold-temperature bias over northern Europe have been significantly reduced in REMO2020. Similarly, the previously modelled dry bias in central Europe has been nearly eliminated, and the extent of the wet bias in eastern Europe has been reduced. The precipitation distribution in REMO2020 is much more realistic, especially in terms of heavy-precipitation extremes. Statistically, REMO2020 aligns better with long-term measurements than with older versions. Mountainous areas still present a challenge in REMO2020, especially with a higher vertical resolution. In this paper, we demonstrate why REMO2020 will be our new model version for future dynamical downscaling activities.


  • Open Access

    Reply on RC2

    by Joni-Pekka Pietikäinen, Kevin Sieck, Lars Buntemeyer, Thomas Frisius, Christine Nam, Peter Hoffmann, Christina Pop, Diana Rechid, Daniela Jacob

    This paper introduces REMO2020, a modernized version of the well-known and widely used REMO regional climate model. REMO2020 has undergone fundamental changes in its code structure to provide a more modular, operationally focused design, facilitating the inclusion of new components and updates. Here, we describe the default configuration of REMO2020, which includes the following updates compared to the previous version REMO2015: (i) FLake lake model; (ii) state-of-the-art MACv2-SP aerosol climatology; (iii) newly developed 3-layer snow module; (iv) a prognostic precipitation scheme; (v) an updated time filter; and (vi) a new tuning approach. Additionally, we describe some optional modules that can be activated separately, such as the interactive MOsaic based VEgetation model iMOVE. REMO2020 outperforms the previous REMO version in almost all areas used to evaluate the European climate. The persistent warm temperature bias over Central Europe and the cold temperature bias over Northern Europe have been significantly reduced in REMO2020. Similarly, the previously modeled dry bias areas in Central Europe are almost entirely gone, and the wet bias areas in Eastern Europe have less extensive precipitation. The precipitation distribution in REMO2020 is much more realistic, especially in terms of heavy precipitation extremes. Statistically, REMO2020 aligns better with long-term measurements than older versions. Mountainous areas still present a challenge in REMO2020, especially with higher vertical resolution. In this paper, we demonstrate why REMO2020 will be our new model version for future dynamical downscaling activities.

  • Open Access

    Reply on RC1

    by Joni-Pekka Pietikäinen, Kevin Sieck, Lars Buntemeyer, Thomas Frisius, Christine Nam, Peter Hoffmann, Christina Pop, Diana Rechid, Daniela Jacob

    This paper introduces REMO2020, a modernized version of the well-known and widely used REMO regional climate model. REMO2020 has undergone fundamental changes in its code structure to provide a more modular, operationally focused design, facilitating the inclusion of new components and updates. Here, we describe the default configuration of REMO2020, which includes the following updates compared to the previous version REMO2015: (i) FLake lake model; (ii) state-of-the-art MACv2-SP aerosol climatology; (iii) newly developed 3-layer snow module; (iv) a prognostic precipitation scheme; (v) an updated time filter; and (vi) a new tuning approach. Additionally, we describe some optional modules that can be activated separately, such as the interactive MOsaic based VEgetation model iMOVE. REMO2020 outperforms the previous REMO version in almost all areas used to evaluate the European climate. The persistent warm temperature bias over Central Europe and the cold temperature bias over Northern Europe have been significantly reduced in REMO2020. Similarly, the previously modeled dry bias areas in Central Europe are almost entirely gone, and the wet bias areas in Eastern Europe have less extensive precipitation. The precipitation distribution in REMO2020 is much more realistic, especially in terms of heavy precipitation extremes. Statistically, REMO2020 aligns better with long-term measurements than older versions. Mountainous areas still present a challenge in REMO2020, especially with higher vertical resolution. In this paper, we demonstrate why REMO2020 will be our new model version for future dynamical downscaling activities.

  • Open Access

    Reply on CC1

    by Joni-Pekka Pietikäinen, Kevin Sieck, Lars Buntemeyer, Thomas Frisius, Christine Nam, Peter Hoffmann, Christina Pop, Diana Rechid, Daniela Jacob

    This paper introduces REMO2020, a modernized version of the well-known and widely used REMO regional climate model. REMO2020 has undergone fundamental changes in its code structure to provide a more modular, operationally focused design, facilitating the inclusion of new components and updates. Here, we describe the default configuration of REMO2020, which includes the following updates compared to the previous version REMO2015: (i) FLake lake model; (ii) state-of-the-art MACv2-SP aerosol climatology; (iii) newly developed 3-layer snow module; (iv) a prognostic precipitation scheme; (v) an updated time filter; and (vi) a new tuning approach. Additionally, we describe some optional modules that can be activated separately, such as the interactive MOsaic based VEgetation model iMOVE. REMO2020 outperforms the previous REMO version in almost all areas used to evaluate the European climate. The persistent warm temperature bias over Central Europe and the cold temperature bias over Northern Europe have been significantly reduced in REMO2020. Similarly, the previously modeled dry bias areas in Central Europe are almost entirely gone, and the wet bias areas in Eastern Europe have less extensive precipitation. The precipitation distribution in REMO2020 is much more realistic, especially in terms of heavy precipitation extremes. Statistically, REMO2020 aligns better with long-term measurements than older versions. Mountainous areas still present a challenge in REMO2020, especially with higher vertical resolution. In this paper, we demonstrate why REMO2020 will be our new model version for future dynamical downscaling activities.

  • Open Access

    CORDEX Flagship Pilot Study URB-RCC: Urban Environments and Regional Climate Change – Where We Are and Where We Are Going

    by Tomas Halenka, Gaby Langendijk, Peter Hoffmann

    Cities play a fundamental role in climate at local to regional scales through modification of heat and moisture fluxes, as well as affecting local atmospheric chemistry and composition, alongside air-pollution dispersion. Vice versa, regional climate change impacts urban areas and is expected to affect cities and their citizens increasingly in the upcoming decades when the share of the population living in urban areas is growing and is projected to reach about 70 % by 2050. This is especially critical in connection to extreme events, for instance, heat waves with extremely high temperatures exacerbated by the urban heat island effect, in particular during night-time, with significant consequences for human health.From the perspective of recent regional climate model development with resolution achieving city scales within convection permitting RCMs, parameterization of urban processes plays an important role to understand local/regional climate change. The inclusion of the individual urban processes affecting energy balance and transport (i.e. heat, humidity, momentum fluxes, emissions) via special urban land-surface interaction parameterization of local processes becomes vital to simulate the urban effects properly. This enables improved assessment of climate change impacts in cities and planning adaptation and/or mitigation options, as well as adequate preparation for climate-related risks (e.g. heat waves, smog conditions, etc.).We introduced this topic to the CORDEX platform, within the framework of flagship pilot studies on challenging issues and gaps in regional climate change knowledge. The main aims and progress of this activity will be presented, especially an analysis of Stage-0 experiments using case studies of heat wave and convection episode within ensemble of nearly 40 simulations for City of Paris with convection permitting RCMs from different groups over the world. Further outlook of long term (10 years – Stage 1 experiment) climate simulation with these models in common strategy to IMPETUS4CHANGE Horizon Europe Project will be presented as well, The development of Global Satellite Cities experiment will be introduced as another part of Stage 1 experiment. Outlooks for further experiments will be explained as well.

  • Open Access

    Impacts of deforestation on drought patterns across multiple time scales in Europe: insights from LUCAS regional climate models

    by Yan Li, Bo Huang, Diana Rechid, Peter Hoffmann, Lisa Jach, Kirsten Warrach-Sagi, Marcus Breil, Priscilla A. Mooney, Merja Tölle, Rita M. Cardoso, et al.