Joni-Pekka Pietikäinen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Joni-Pekka Pietikäinen has a total of 226 co-authors. Here are the top co-authors by number of shared publications:
Diana Rechid
Climate Service Center Germany (GERICS), Helmholtz-Zentrum Hereon, Fischertwiete 1, 20095 Hamburg, Germany
31 shared publications- Peter Hoffmann
Climate Service Center Germany (GERICS), Helmholtz-Zentrum Hereon, Fischertwiete 1, 20095 Hamburg, Germany
21 shared publications - Ari Laaksonen
Finnish Meteorological Institute, 00560 Helsinki, Finland
18 shared publications - Lars Buntemeyer
Climate Service Center Germany (GERICS), Helmholtz-Zentrum Hereon, Fischertwiete 1, 20095 Hamburg, Germany
16 shared publications - Kevin Sieck
Institute of Coastal Systems - Analysis and Modeling, Helmholtz-Zentrum Hereon, Geesthacht, Germany
14 shared publications Daniela Jacob
Climate Service Center Germany (GERICS), Helmholtz-Zentrum Hereon, Fischertwiete 1, 20095 Hamburg, Germany
13 shared publications
Latest Publications
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Urban heat extremes in REMO2020-TEB convection-permitting regional climate simulations over Europe
Recent heat extremes have highlighted both existing and emerging vulnerabilities in European cities, underscoring the need for robust climate information to support future urban adaptation. These risks are projected to intensify under climate change, particularly in densely populated urban environments. Accurately representing urban surface and atmosphere interactions therefore remains a key challenge for regional climate modelling at city scales. Convection-permitting regional climate models (CPRCMs) resolving climate processes at the kilometer-scale provide new opportunities to simulate urban areas and their local climate processes through urban parameterizations.We investigate how urban representation modifies present-day and future urban climates in CPRCM simulations over Europe. We use the regional climate model REMO2020 at 3 km horizontal resolution, newly coupled with the Town Energy Balance (TEB) urban canopy model. Historical and future climate simulations are conducted for the Horizon Europe project Impetus4Change over two European domains covering cities across contrasting continental and maritime climates, including southern and northern European urban environments.The analysis focuses on urban heat extremes and their diurnal characteristics, including urban-rural temperature contrasts and the persistence of elevated night-time temperatures. The added value of the urban canopy model TEB is assessed compared to a bulk approach and coarser-resolution simulations in REMO. By comparing present-day conditions with end-of-century climate projections, we assess how urban heat extremes and urban-rural temperature patterns evolve with warming and whether urban effects scale with increasing background temperatures.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessUrban heat extremes in REMO2020-TEB convection-permitting regional climate simulations over Europe
Recent heat extremes have highlighted both existing and emerging vulnerabilities in European cities, underscoring the need for robust climate information to support future urban adaptation. These risks are projected to intensify under climate change, particularly in densely populated urban environments. Accurately representing urban surface and atmosphere interactions therefore remains a key challenge for regional climate modelling at city scales. Convection-permitting regional climate models (CPRCMs) resolving climate processes at the kilometer-scale provide new opportunities to simulate urban areas and their local climate processes through urban parameterizations.We investigate how urban representation modifies present-day and future urban climates in CPRCM simulations over Europe. We use the regional climate model REMO2020 at 3 km horizontal resolution, newly coupled with the Town Energy Balance (TEB) urban canopy model. Historical and future climate simulations are conducted for the Horizon Europe project Impetus4Change over two European domains covering cities across contrasting continental and maritime climates, including southern and northern European urban environments.The analysis focuses on urban heat extremes and their diurnal characteristics, including urban-rural temperature contrasts and the persistence of elevated night-time temperatures. The added value of the urban canopy model TEB is assessed compared to a bulk approach and coarser-resolution simulations in REMO. By comparing present-day conditions with end-of-century climate projections, we assess how urban heat extremes and urban-rural temperature patterns evolve with warming and whether urban effects scale with increasing background temperatures.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Implementation of a new version of the regional climate model REMO over South Asia
In the present study, the new version of the regional climate model REMO, i.e., REMO2020, will be applied over the South Asia domain as part of the Deutsche Forschungsgemeinschaft (DFG)-funded project titled “Modeling South Asian climate in relation to irrigation and land use changes using a modified scheme for soil hydrology and an interactive vegetation scheme in a regional climate model (MOSAIC)”. The new version has been updated in several aspects compared to the earlier version, REMO2015. Key updates include the implementation of a default lake module (FLake), a three-layered snow module, and a state-of-the-art MACv2-SP aerosol climatology. The model has already been implemented over the European domain and outperforms the previous version in simulating regional climate, especially extremes.The MOSAIC project will utilize REMO2020 to simulate the South Asian region at a 12 km (0.11°) resolution, emphasizing the monsoon dynamics. Boundary conditions will be provided by ERA5 data, which includes 49 vertical levels, covering the period from 1985 to 2015. To enhance the assessment, REMO2020 outputs will be compared with the existing CORDEX-CORE REMO2015 for precipitation and temperature variables. Additional analyses will also be conducted to assess the model’s effectiveness in representing monsoonal processes.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessImplementation of a new version of the regional climate model REMO over South Asia
In the present study, the new version of the regional climate model REMO, i.e., REMO2020, will be applied over the South Asia domain as part of the Deutsche Forschungsgemeinschaft (DFG)-funded project titled “Modeling South Asian climate in relation to irrigation and land use changes using a modified scheme for soil hydrology and an interactive vegetation scheme in a regional climate model (MOSAIC)”. The new version has been updated in several aspects compared to the earlier version, REMO2015. Key updates include the implementation of a default lake module (FLake), a three-layered snow module, and a state-of-the-art MACv2-SP aerosol climatology. The model has already been implemented over the European domain and outperforms the previous version in simulating regional climate, especially extremes.The MOSAIC project will utilize REMO2020 to simulate the South Asian region at a 12 km (0.11°) resolution, emphasizing the monsoon dynamics. Boundary conditions will be provided by ERA5 data, which includes 49 vertical levels, covering the period from 1985 to 2015. To enhance the assessment, REMO2020 outputs will be compared with the existing CORDEX-CORE REMO2015 for precipitation and temperature variables. Additional analyses will also be conducted to assess the model’s effectiveness in representing monsoonal processes.
- Open Access
- 18 December 2025
- Published by Springer Nature in Scientific Data
- Vol. 12 (1) , 1961
A global CORDEX-based dataset delineating urban areas and their surroundings to assess climate change in megacities
We present a global dataset of urban areas and their rural surroundings, developed within the framework of the CORDEX Flagship Pilot Study on Urban Environments and Regional Climate Change. The dataset is derived from model-specific urban fraction variables and additional static inputs. Urban and rural surrounding areas are delineated using Regional Climate Model (RCM) simulations from the global CORDEX-CORE and European EURO-CORDEX initiatives, focusing on a representative set of megacities worldwide. The analysis was conducted at horizontal resolutions of 25 km globally and 12.5 km for Europe. To facilitate future applications, we provide a Python-based workflow that can be extended for the analysis of additional cities and RCMs, including tools for evaluating the urban climate island effect. The dataset and tools, available via Zenodo and GitHub, offer a consistent and reproducible approach for assessing urban climate change in current and upcoming regional climate projections. This constitutes the first global RCM-based database of urban/rural areas, providing a foundation for future high-resolution model data analysis efforts, such as studies using convection-permitting simulations.
- 18 December 2025
- Published by Springer Nature in Scientific Data
- Vol. 12 (1) , 1961
Open AccessA global CORDEX-based dataset delineating urban areas and their surroundings to assess climate change in megacities
We present a global dataset of urban areas and their rural surroundings, developed within the framework of the CORDEX Flagship Pilot Study on Urban Environments and Regional Climate Change. The dataset is derived from model-specific urban fraction variables and additional static inputs. Urban and rural surrounding areas are delineated using Regional Climate Model (RCM) simulations from the global CORDEX-CORE and European EURO-CORDEX initiatives, focusing on a representative set of megacities worldwide. The analysis was conducted at horizontal resolutions of 25 km globally and 12.5 km for Europe. To facilitate future applications, we provide a Python-based workflow that can be extended for the analysis of additional cities and RCMs, including tools for evaluating the urban climate island effect. The dataset and tools, available via Zenodo and GitHub, offer a consistent and reproducible approach for assessing urban climate change in current and upcoming regional climate projections. This constitutes the first global RCM-based database of urban/rural areas, providing a foundation for future high-resolution model data analysis efforts, such as studies using convection-permitting simulations.
- Open Access
- 28 October 2025
- Published by Copernicus GmbH in Geoscientific Model Development
- Vol. 18 (20) , 7907-7949
REMO2020: a modernised modular regional climate model
This paper introduces REMO2020, a modernised version of the well-known and widely used REgional climate MOdel (REMO). REMO2020 has undergone fundamental changes in its code structure to provide a more modular, operationally focused design, facilitating the inclusion of new components and updates. Here, we describe the default configuration of REMO2020, which includes the following updates compared to the previous version, REMO2015: (i) the FLake lake model, (ii) a state-of-the-art MACv2-SP aerosol climatology, (iii) a newly developed three-layer snow module, (iv) a prognostic precipitation scheme, (v) an updated time filter, and (vi) a new tuning approach. Additionally, we describe some optional modules that can be activated separately, such as the interactive MOsaic-based VEgetation model iMOVE. REMO2020 outperforms its predecessor REMO2015 with regard to nearly all evaluation metrics used to evaluate simulations of Europe's climate. The persistent warm-temperature bias over central Europe and the cold-temperature bias over northern Europe have been significantly reduced in REMO2020. Similarly, the previously modelled dry bias in central Europe has been nearly eliminated, and the extent of the wet bias in eastern Europe has been reduced. The precipitation distribution in REMO2020 is much more realistic, especially in terms of heavy-precipitation extremes. Statistically, REMO2020 aligns better with long-term measurements than with older versions. Mountainous areas still present a challenge in REMO2020, especially with a higher vertical resolution. In this paper, we demonstrate why REMO2020 will be our new model version for future dynamical downscaling activities.
- 28 October 2025
- Published by Copernicus GmbH in Geoscientific Model Development
- Vol. 18 (20) , 7907-7949
Open AccessREMO2020: a modernised modular regional climate model
This paper introduces REMO2020, a modernised version of the well-known and widely used REgional climate MOdel (REMO). REMO2020 has undergone fundamental changes in its code structure to provide a more modular, operationally focused design, facilitating the inclusion of new components and updates. Here, we describe the default configuration of REMO2020, which includes the following updates compared to the previous version, REMO2015: (i) the FLake lake model, (ii) a state-of-the-art MACv2-SP aerosol climatology, (iii) a newly developed three-layer snow module, (iv) a prognostic precipitation scheme, (v) an updated time filter, and (vi) a new tuning approach. Additionally, we describe some optional modules that can be activated separately, such as the interactive MOsaic-based VEgetation model iMOVE. REMO2020 outperforms its predecessor REMO2015 with regard to nearly all evaluation metrics used to evaluate simulations of Europe's climate. The persistent warm-temperature bias over central Europe and the cold-temperature bias over northern Europe have been significantly reduced in REMO2020. Similarly, the previously modelled dry bias in central Europe has been nearly eliminated, and the extent of the wet bias in eastern Europe has been reduced. The precipitation distribution in REMO2020 is much more realistic, especially in terms of heavy-precipitation extremes. Statistically, REMO2020 aligns better with long-term measurements than with older versions. Mountainous areas still present a challenge in REMO2020, especially with a higher vertical resolution. In this paper, we demonstrate why REMO2020 will be our new model version for future dynamical downscaling activities.
- Open Access
- 29 July 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-57
Reply on RC2
This paper introduces REMO2020, a modernized version of the well-known and widely used REMO regional climate model. REMO2020 has undergone fundamental changes in its code structure to provide a more modular, operationally focused design, facilitating the inclusion of new components and updates. Here, we describe the default configuration of REMO2020, which includes the following updates compared to the previous version REMO2015: (i) FLake lake model; (ii) state-of-the-art MACv2-SP aerosol climatology; (iii) newly developed 3-layer snow module; (iv) a prognostic precipitation scheme; (v) an updated time filter; and (vi) a new tuning approach. Additionally, we describe some optional modules that can be activated separately, such as the interactive MOsaic based VEgetation model iMOVE. REMO2020 outperforms the previous REMO version in almost all areas used to evaluate the European climate. The persistent warm temperature bias over Central Europe and the cold temperature bias over Northern Europe have been significantly reduced in REMO2020. Similarly, the previously modeled dry bias areas in Central Europe are almost entirely gone, and the wet bias areas in Eastern Europe have less extensive precipitation. The precipitation distribution in REMO2020 is much more realistic, especially in terms of heavy precipitation extremes. Statistically, REMO2020 aligns better with long-term measurements than older versions. Mountainous areas still present a challenge in REMO2020, especially with higher vertical resolution. In this paper, we demonstrate why REMO2020 will be our new model version for future dynamical downscaling activities.
- 29 July 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-57
Open AccessReply on RC2
This paper introduces REMO2020, a modernized version of the well-known and widely used REMO regional climate model. REMO2020 has undergone fundamental changes in its code structure to provide a more modular, operationally focused design, facilitating the inclusion of new components and updates. Here, we describe the default configuration of REMO2020, which includes the following updates compared to the previous version REMO2015: (i) FLake lake model; (ii) state-of-the-art MACv2-SP aerosol climatology; (iii) newly developed 3-layer snow module; (iv) a prognostic precipitation scheme; (v) an updated time filter; and (vi) a new tuning approach. Additionally, we describe some optional modules that can be activated separately, such as the interactive MOsaic based VEgetation model iMOVE. REMO2020 outperforms the previous REMO version in almost all areas used to evaluate the European climate. The persistent warm temperature bias over Central Europe and the cold temperature bias over Northern Europe have been significantly reduced in REMO2020. Similarly, the previously modeled dry bias areas in Central Europe are almost entirely gone, and the wet bias areas in Eastern Europe have less extensive precipitation. The precipitation distribution in REMO2020 is much more realistic, especially in terms of heavy precipitation extremes. Statistically, REMO2020 aligns better with long-term measurements than older versions. Mountainous areas still present a challenge in REMO2020, especially with higher vertical resolution. In this paper, we demonstrate why REMO2020 will be our new model version for future dynamical downscaling activities.
- Open Access
- 29 July 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-57
Reply on RC1
This paper introduces REMO2020, a modernized version of the well-known and widely used REMO regional climate model. REMO2020 has undergone fundamental changes in its code structure to provide a more modular, operationally focused design, facilitating the inclusion of new components and updates. Here, we describe the default configuration of REMO2020, which includes the following updates compared to the previous version REMO2015: (i) FLake lake model; (ii) state-of-the-art MACv2-SP aerosol climatology; (iii) newly developed 3-layer snow module; (iv) a prognostic precipitation scheme; (v) an updated time filter; and (vi) a new tuning approach. Additionally, we describe some optional modules that can be activated separately, such as the interactive MOsaic based VEgetation model iMOVE. REMO2020 outperforms the previous REMO version in almost all areas used to evaluate the European climate. The persistent warm temperature bias over Central Europe and the cold temperature bias over Northern Europe have been significantly reduced in REMO2020. Similarly, the previously modeled dry bias areas in Central Europe are almost entirely gone, and the wet bias areas in Eastern Europe have less extensive precipitation. The precipitation distribution in REMO2020 is much more realistic, especially in terms of heavy precipitation extremes. Statistically, REMO2020 aligns better with long-term measurements than older versions. Mountainous areas still present a challenge in REMO2020, especially with higher vertical resolution. In this paper, we demonstrate why REMO2020 will be our new model version for future dynamical downscaling activities.
- 29 July 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-57
Open AccessReply on RC1
This paper introduces REMO2020, a modernized version of the well-known and widely used REMO regional climate model. REMO2020 has undergone fundamental changes in its code structure to provide a more modular, operationally focused design, facilitating the inclusion of new components and updates. Here, we describe the default configuration of REMO2020, which includes the following updates compared to the previous version REMO2015: (i) FLake lake model; (ii) state-of-the-art MACv2-SP aerosol climatology; (iii) newly developed 3-layer snow module; (iv) a prognostic precipitation scheme; (v) an updated time filter; and (vi) a new tuning approach. Additionally, we describe some optional modules that can be activated separately, such as the interactive MOsaic based VEgetation model iMOVE. REMO2020 outperforms the previous REMO version in almost all areas used to evaluate the European climate. The persistent warm temperature bias over Central Europe and the cold temperature bias over Northern Europe have been significantly reduced in REMO2020. Similarly, the previously modeled dry bias areas in Central Europe are almost entirely gone, and the wet bias areas in Eastern Europe have less extensive precipitation. The precipitation distribution in REMO2020 is much more realistic, especially in terms of heavy precipitation extremes. Statistically, REMO2020 aligns better with long-term measurements than older versions. Mountainous areas still present a challenge in REMO2020, especially with higher vertical resolution. In this paper, we demonstrate why REMO2020 will be our new model version for future dynamical downscaling activities.
- Open Access
- 29 July 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-57
Reply on CC1
This paper introduces REMO2020, a modernized version of the well-known and widely used REMO regional climate model. REMO2020 has undergone fundamental changes in its code structure to provide a more modular, operationally focused design, facilitating the inclusion of new components and updates. Here, we describe the default configuration of REMO2020, which includes the following updates compared to the previous version REMO2015: (i) FLake lake model; (ii) state-of-the-art MACv2-SP aerosol climatology; (iii) newly developed 3-layer snow module; (iv) a prognostic precipitation scheme; (v) an updated time filter; and (vi) a new tuning approach. Additionally, we describe some optional modules that can be activated separately, such as the interactive MOsaic based VEgetation model iMOVE. REMO2020 outperforms the previous REMO version in almost all areas used to evaluate the European climate. The persistent warm temperature bias over Central Europe and the cold temperature bias over Northern Europe have been significantly reduced in REMO2020. Similarly, the previously modeled dry bias areas in Central Europe are almost entirely gone, and the wet bias areas in Eastern Europe have less extensive precipitation. The precipitation distribution in REMO2020 is much more realistic, especially in terms of heavy precipitation extremes. Statistically, REMO2020 aligns better with long-term measurements than older versions. Mountainous areas still present a challenge in REMO2020, especially with higher vertical resolution. In this paper, we demonstrate why REMO2020 will be our new model version for future dynamical downscaling activities.
- 29 July 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-57
Open AccessReply on CC1
This paper introduces REMO2020, a modernized version of the well-known and widely used REMO regional climate model. REMO2020 has undergone fundamental changes in its code structure to provide a more modular, operationally focused design, facilitating the inclusion of new components and updates. Here, we describe the default configuration of REMO2020, which includes the following updates compared to the previous version REMO2015: (i) FLake lake model; (ii) state-of-the-art MACv2-SP aerosol climatology; (iii) newly developed 3-layer snow module; (iv) a prognostic precipitation scheme; (v) an updated time filter; and (vi) a new tuning approach. Additionally, we describe some optional modules that can be activated separately, such as the interactive MOsaic based VEgetation model iMOVE. REMO2020 outperforms the previous REMO version in almost all areas used to evaluate the European climate. The persistent warm temperature bias over Central Europe and the cold temperature bias over Northern Europe have been significantly reduced in REMO2020. Similarly, the previously modeled dry bias areas in Central Europe are almost entirely gone, and the wet bias areas in Eastern Europe have less extensive precipitation. The precipitation distribution in REMO2020 is much more realistic, especially in terms of heavy precipitation extremes. Statistically, REMO2020 aligns better with long-term measurements than older versions. Mountainous areas still present a challenge in REMO2020, especially with higher vertical resolution. In this paper, we demonstrate why REMO2020 will be our new model version for future dynamical downscaling activities.
- Open Access
- 17 June 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-57
Reply on CEC3
This paper introduces REMO2020, a modernized version of the well-known and widely used REMO regional climate model. REMO2020 has undergone fundamental changes in its code structure to provide a more modular, operationally focused design, facilitating the inclusion of new components and updates. Here, we describe the default configuration of REMO2020, which includes the following updates compared to the previous version REMO2015: (i) FLake lake model; (ii) state-of-the-art MACv2-SP aerosol climatology; (iii) newly developed 3-layer snow module; (iv) a prognostic precipitation scheme; (v) an updated time filter; and (vi) a new tuning approach. Additionally, we describe some optional modules that can be activated separately, such as the interactive MOsaic based VEgetation model iMOVE. REMO2020 outperforms the previous REMO version in almost all areas used to evaluate the European climate. The persistent warm temperature bias over Central Europe and the cold temperature bias over Northern Europe have been significantly reduced in REMO2020. Similarly, the previously modeled dry bias areas in Central Europe are almost entirely gone, and the wet bias areas in Eastern Europe have less extensive precipitation. The precipitation distribution in REMO2020 is much more realistic, especially in terms of heavy precipitation extremes. Statistically, REMO2020 aligns better with long-term measurements than older versions. Mountainous areas still present a challenge in REMO2020, especially with higher vertical resolution. In this paper, we demonstrate why REMO2020 will be our new model version for future dynamical downscaling activities.
- 17 June 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-57
Open AccessReply on CEC3
This paper introduces REMO2020, a modernized version of the well-known and widely used REMO regional climate model. REMO2020 has undergone fundamental changes in its code structure to provide a more modular, operationally focused design, facilitating the inclusion of new components and updates. Here, we describe the default configuration of REMO2020, which includes the following updates compared to the previous version REMO2015: (i) FLake lake model; (ii) state-of-the-art MACv2-SP aerosol climatology; (iii) newly developed 3-layer snow module; (iv) a prognostic precipitation scheme; (v) an updated time filter; and (vi) a new tuning approach. Additionally, we describe some optional modules that can be activated separately, such as the interactive MOsaic based VEgetation model iMOVE. REMO2020 outperforms the previous REMO version in almost all areas used to evaluate the European climate. The persistent warm temperature bias over Central Europe and the cold temperature bias over Northern Europe have been significantly reduced in REMO2020. Similarly, the previously modeled dry bias areas in Central Europe are almost entirely gone, and the wet bias areas in Eastern Europe have less extensive precipitation. The precipitation distribution in REMO2020 is much more realistic, especially in terms of heavy precipitation extremes. Statistically, REMO2020 aligns better with long-term measurements than older versions. Mountainous areas still present a challenge in REMO2020, especially with higher vertical resolution. In this paper, we demonstrate why REMO2020 will be our new model version for future dynamical downscaling activities.
- Open Access
- 17 June 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-57
Reply on CEC2
This paper introduces REMO2020, a modernized version of the well-known and widely used REMO regional climate model. REMO2020 has undergone fundamental changes in its code structure to provide a more modular, operationally focused design, facilitating the inclusion of new components and updates. Here, we describe the default configuration of REMO2020, which includes the following updates compared to the previous version REMO2015: (i) FLake lake model; (ii) state-of-the-art MACv2-SP aerosol climatology; (iii) newly developed 3-layer snow module; (iv) a prognostic precipitation scheme; (v) an updated time filter; and (vi) a new tuning approach. Additionally, we describe some optional modules that can be activated separately, such as the interactive MOsaic based VEgetation model iMOVE. REMO2020 outperforms the previous REMO version in almost all areas used to evaluate the European climate. The persistent warm temperature bias over Central Europe and the cold temperature bias over Northern Europe have been significantly reduced in REMO2020. Similarly, the previously modeled dry bias areas in Central Europe are almost entirely gone, and the wet bias areas in Eastern Europe have less extensive precipitation. The precipitation distribution in REMO2020 is much more realistic, especially in terms of heavy precipitation extremes. Statistically, REMO2020 aligns better with long-term measurements than older versions. Mountainous areas still present a challenge in REMO2020, especially with higher vertical resolution. In this paper, we demonstrate why REMO2020 will be our new model version for future dynamical downscaling activities.
- 17 June 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-57
Open AccessReply on CEC2
This paper introduces REMO2020, a modernized version of the well-known and widely used REMO regional climate model. REMO2020 has undergone fundamental changes in its code structure to provide a more modular, operationally focused design, facilitating the inclusion of new components and updates. Here, we describe the default configuration of REMO2020, which includes the following updates compared to the previous version REMO2015: (i) FLake lake model; (ii) state-of-the-art MACv2-SP aerosol climatology; (iii) newly developed 3-layer snow module; (iv) a prognostic precipitation scheme; (v) an updated time filter; and (vi) a new tuning approach. Additionally, we describe some optional modules that can be activated separately, such as the interactive MOsaic based VEgetation model iMOVE. REMO2020 outperforms the previous REMO version in almost all areas used to evaluate the European climate. The persistent warm temperature bias over Central Europe and the cold temperature bias over Northern Europe have been significantly reduced in REMO2020. Similarly, the previously modeled dry bias areas in Central Europe are almost entirely gone, and the wet bias areas in Eastern Europe have less extensive precipitation. The precipitation distribution in REMO2020 is much more realistic, especially in terms of heavy precipitation extremes. Statistically, REMO2020 aligns better with long-term measurements than older versions. Mountainous areas still present a challenge in REMO2020, especially with higher vertical resolution. In this paper, we demonstrate why REMO2020 will be our new model version for future dynamical downscaling activities.
- Open Access
- 16 June 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-57
Comment on egusphere-2025-1586
This paper introduces REMO2020, a modernized version of the well-known and widely used REMO regional climate model. REMO2020 has undergone fundamental changes in its code structure to provide a more modular, operationally focused design, facilitating the inclusion of new components and updates. Here, we describe the default configuration of REMO2020, which includes the following updates compared to the previous version REMO2015: (i) FLake lake model; (ii) state-of-the-art MACv2-SP aerosol climatology; (iii) newly developed 3-layer snow module; (iv) a prognostic precipitation scheme; (v) an updated time filter; and (vi) a new tuning approach. Additionally, we describe some optional modules that can be activated separately, such as the interactive MOsaic based VEgetation model iMOVE. REMO2020 outperforms the previous REMO version in almost all areas used to evaluate the European climate. The persistent warm temperature bias over Central Europe and the cold temperature bias over Northern Europe have been significantly reduced in REMO2020. Similarly, the previously modeled dry bias areas in Central Europe are almost entirely gone, and the wet bias areas in Eastern Europe have less extensive precipitation. The precipitation distribution in REMO2020 is much more realistic, especially in terms of heavy precipitation extremes. Statistically, REMO2020 aligns better with long-term measurements than older versions. Mountainous areas still present a challenge in REMO2020, especially with higher vertical resolution. In this paper, we demonstrate why REMO2020 will be our new model version for future dynamical downscaling activities.
- 16 June 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-57
Open AccessComment on egusphere-2025-1586
This paper introduces REMO2020, a modernized version of the well-known and widely used REMO regional climate model. REMO2020 has undergone fundamental changes in its code structure to provide a more modular, operationally focused design, facilitating the inclusion of new components and updates. Here, we describe the default configuration of REMO2020, which includes the following updates compared to the previous version REMO2015: (i) FLake lake model; (ii) state-of-the-art MACv2-SP aerosol climatology; (iii) newly developed 3-layer snow module; (iv) a prognostic precipitation scheme; (v) an updated time filter; and (vi) a new tuning approach. Additionally, we describe some optional modules that can be activated separately, such as the interactive MOsaic based VEgetation model iMOVE. REMO2020 outperforms the previous REMO version in almost all areas used to evaluate the European climate. The persistent warm temperature bias over Central Europe and the cold temperature bias over Northern Europe have been significantly reduced in REMO2020. Similarly, the previously modeled dry bias areas in Central Europe are almost entirely gone, and the wet bias areas in Eastern Europe have less extensive precipitation. The precipitation distribution in REMO2020 is much more realistic, especially in terms of heavy precipitation extremes. Statistically, REMO2020 aligns better with long-term measurements than older versions. Mountainous areas still present a challenge in REMO2020, especially with higher vertical resolution. In this paper, we demonstrate why REMO2020 will be our new model version for future dynamical downscaling activities.