Lee Chow
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Lee Chow has a total of 98 co-authors. Here are the top co-authors by number of shared publications:
- Liann-Be Chang
Department of Electronic Engineering, Chang Gung University, Taoyuan 333, Taiwan
11 shared publications - Ming-Jer Jeng
Department of Electronic Engineering, Chang Gung University, Taoyuan 333, Taiwan
6 shared publications - Oleg Lupan
Technical University of Moldova
5 shared publications - Rainer Adelung
Kiel University
3 shared publications - Shiang-Fu Huang
Department of Otolaryngology, Head and Neck Surgery, Chang Gung Memorial, Linkou, Taiwan
3 shared publications - Alfons Schulte
Department of Physics, University of Central Florida 1 , Orlando, Florida 32816
2 shared publications
Latest Publications
- Open Access
Novel Quantitative Analysis Using Optical Imaging (VELscope) and Spectroscopy (Raman) Techniques for Oral Cancer Detection
In this study, we developed a novel quantitative analysis method to enhance the detection capability for oral cancer screening. We combined two different optical techniques, a light-based detection technique (visually enhanced lesion scope) and a vibrational spectroscopic technique (Raman spectroscopy). Materials and methods: Thirty-five oral cancer patients who went through surgery were enrolled. Thirty-five cancer lesions and thirty-five control samples with normal oral mucosa (adjacent to the cancer lesion) were analyzed. Thirty-five autofluorescence images and 70 Raman spectra were taken from 35 cancer and 35 control group cryopreserved samples. The normalized intensity and heterogeneity of the 70 regions of interest (ROIs) were calculated along with 70 averaged Raman spectra. Linear discriminant analysis (LDA) and quadratic discriminant analysis (QDA) were used with principal component analysis (PCA) to differentiate the cancer and control groups (normal). The classifications rates were validated using two different validation methods, leave-one-out cross-validation (LOOCV) and k-fold cross-validation. Results: The cryopreserved normal and tumor tissues were differentiated using the PCA–LDA and PCA–QDA models. The PCA–LDA of Raman spectroscopy (RS) had 82.9% accuracy, 80% sensitivity, and 85.7% specificity, while ROIs on the autofluorescence images were differentiated with 90% accuracy, 100% sensitivity, and 80% specificity. The combination of two optical techniques differentiated cancer and normal group with 97.14% accuracy, 100% sensitivity, and 94.3% specificity. Conclusion: In this study, we combined the data of two different optical techniques. Furthermore, PCA–LDA and PCA–QDA quantitative analysis models were used to differentiate tumor and normal groups, creating a complementary pathway for efficient tumor diagnosis. The error rates of RS and VELcope analysis were 17.10% and 10%, respectively, which was reduced to 3% when the two optical techniques were combined.
Open AccessNovel Quantitative Analysis Using Optical Imaging (VELscope) and Spectroscopy (Raman) Techniques for Oral Cancer Detection
In this study, we developed a novel quantitative analysis method to enhance the detection capability for oral cancer screening. We combined two different optical techniques, a light-based detection technique (visually enhanced lesion scope) and a vibrational spectroscopic technique (Raman spectroscopy). Materials and methods: Thirty-five oral cancer patients who went through surgery were enrolled. Thirty-five cancer lesions and thirty-five control samples with normal oral mucosa (adjacent to the cancer lesion) were analyzed. Thirty-five autofluorescence images and 70 Raman spectra were taken from 35 cancer and 35 control group cryopreserved samples. The normalized intensity and heterogeneity of the 70 regions of interest (ROIs) were calculated along with 70 averaged Raman spectra. Linear discriminant analysis (LDA) and quadratic discriminant analysis (QDA) were used with principal component analysis (PCA) to differentiate the cancer and control groups (normal). The classifications rates were validated using two different validation methods, leave-one-out cross-validation (LOOCV) and k-fold cross-validation. Results: The cryopreserved normal and tumor tissues were differentiated using the PCA–LDA and PCA–QDA models. The PCA–LDA of Raman spectroscopy (RS) had 82.9% accuracy, 80% sensitivity, and 85.7% specificity, while ROIs on the autofluorescence images were differentiated with 90% accuracy, 100% sensitivity, and 80% specificity. The combination of two optical techniques differentiated cancer and normal group with 97.14% accuracy, 100% sensitivity, and 94.3% specificity. Conclusion: In this study, we combined the data of two different optical techniques. Furthermore, PCA–LDA and PCA–QDA quantitative analysis models were used to differentiate tumor and normal groups, creating a complementary pathway for efficient tumor diagnosis. The error rates of RS and VELcope analysis were 17.10% and 10%, respectively, which was reduced to 3% when the two optical techniques were combined.
- Open Access
- 29 October 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 44, 1-4
Au-NPs/ZnO Single Nanowire Nanosensors for Health Care Applications
Herein, the room temperature gas sensing properties of a device fabricated based on an individual gold nanoparticles (AuNPs)-functionalized zinc oxide nanowire (ZnO NW) is reported. The Au-NPs/ZnO nanowires were deposited using the electrochemical approach in a classical three-electrode electrochemical cell. The dual beam focused ion beam/scanning electron microscopy (FIB/SEM) was used to integrate the single nanostructures into gas sensing nanodevices. The results are promising for future applications in monitoring H 2 gas for health care applications and clinical breath analysis.
- 29 October 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 44, 1-4
Open AccessAu-NPs/ZnO Single Nanowire Nanosensors for Health Care Applications
Herein, the room temperature gas sensing properties of a device fabricated based on an individual gold nanoparticles (AuNPs)-functionalized zinc oxide nanowire (ZnO NW) is reported. The Au-NPs/ZnO nanowires were deposited using the electrochemical approach in a classical three-electrode electrochemical cell. The dual beam focused ion beam/scanning electron microscopy (FIB/SEM) was used to integrate the single nanostructures into gas sensing nanodevices. The results are promising for future applications in monitoring H 2 gas for health care applications and clinical breath analysis.
- 2 March 2020
- Published by IOP Publishing in Nanotechnology
- Vol. 31 (20) , 205002
Berezinskii–Kosterlitz–Thouless transition in an Al superconducting nanofilm grown on GaAs by molecular beam epitaxy
We have performed extensive transport experiments on a 4 nm thick aluminum (Al) superconducting film grown on a GaAs substrate by molecular beam epitaxy (MBE). Nonlinear current–voltage ( I – V ) measurements on such a MBE-grown superconducting nanofilm show that V ∼ I 3 , which is evidence for the Berezinskii–Kosterlitz–Thouless (BKT) transition, both in the low-voltage ( T BKT ≈ 1.97 K) and high-voltage regions ( T BKT ≈ 2.17 K). In order to further study the two regions where the I – V curves are BKT-like, our experimental data are fitted to the temperature-induced vortices/antivortices unbinding model as well as the dynamical scaling theory. It is found that the transition temperature obtained in the high-voltage region is the correct T BKT as confirmed by fitting the data to the aforementioned models. Our experimental results unequivocally show that I – V measurements alone may not allow one to determine T BKT for superconducting transition. Therefore, one should try to fit one’s results to the temperature-induced vortices/antivortices unbinding model and the dynamical scaling theory to accurately determine T BKT in a two-dimensional superconductor.
- 2 March 2020
- Published by IOP Publishing in Nanotechnology
- Vol. 31 (20) , 205002
Berezinskii–Kosterlitz–Thouless transition in an Al superconducting nanofilm grown on GaAs by molecular beam epitaxy
We have performed extensive transport experiments on a 4 nm thick aluminum (Al) superconducting film grown on a GaAs substrate by molecular beam epitaxy (MBE). Nonlinear current–voltage ( I – V ) measurements on such a MBE-grown superconducting nanofilm show that V ∼ I 3 , which is evidence for the Berezinskii–Kosterlitz–Thouless (BKT) transition, both in the low-voltage ( T BKT ≈ 1.97 K) and high-voltage regions ( T BKT ≈ 2.17 K). In order to further study the two regions where the I – V curves are BKT-like, our experimental data are fitted to the temperature-induced vortices/antivortices unbinding model as well as the dynamical scaling theory. It is found that the transition temperature obtained in the high-voltage region is the correct T BKT as confirmed by fitting the data to the aforementioned models. Our experimental results unequivocally show that I – V measurements alone may not allow one to determine T BKT for superconducting transition. Therefore, one should try to fit one’s results to the temperature-induced vortices/antivortices unbinding model and the dynamical scaling theory to accurately determine T BKT in a two-dimensional superconductor.
- Open Access
- 27 December 2019
- Published by Wiley in Journal of Nanomaterials
- Vol. 2019, 1-6
Topological Transition in a 3 nm Thick Al Film Grown by Molecular Beam Epitaxy
We have performed detailed transport measurements on a 3 nm thick (as-grown) Al film on GaAs prepared by molecular beam epitaxy (MBE). Such an epitaxial film grown on a GaAs substrate shows the Berezinskii-Kosterlitz-Thouless (BKT) transition, a topological transition in two dimensions. Our experimental data shows that the MBE-grown Al nanofilm is an ideal system for probing interesting physical phenomena such as the BKT transition and superconductivity. The increased superconductor transition temperature (~2.4 K) compared to that of bulk Al (1.2 K), together with the ultrathin film quality, may be advantageous for future superconductor-based quantum devices and quantum information technology.
- 27 December 2019
- Published by Wiley in Journal of Nanomaterials
- Vol. 2019, 1-6
Open AccessTopological Transition in a 3 nm Thick Al Film Grown by Molecular Beam Epitaxy
We have performed detailed transport measurements on a 3 nm thick (as-grown) Al film on GaAs prepared by molecular beam epitaxy (MBE). Such an epitaxial film grown on a GaAs substrate shows the Berezinskii-Kosterlitz-Thouless (BKT) transition, a topological transition in two dimensions. Our experimental data shows that the MBE-grown Al nanofilm is an ideal system for probing interesting physical phenomena such as the BKT transition and superconductivity. The increased superconductor transition temperature (~2.4 K) compared to that of bulk Al (1.2 K), together with the ultrathin film quality, may be advantageous for future superconductor-based quantum devices and quantum information technology.
- Open Access
- 27 August 2019
- Published by MDPI AG in Journal of Clinical Medicine
- Vol. 8 (9) , 1313
Raman Spectroscopy Analysis for Optical Diagnosis of Oral Cancer Detection
Raman spectroscopy (RS) is widely used as a non-invasive technique in screening for the diagnosis of oral cancer. The potential of this optical technique for several biomedical applications has been proved. This work studies the efficacy of RS in detecting oral cancer using sub-site-wise differentiation. A total of 80 samples (44 tumor and 36 normal) were cryopreserved from three different sub-sites: The tongue, the buccal mucosa, and the gingiva of the oral mucosa during surgery. Linear discriminant analysis (LDA) and quadratic discriminant analysis (QDA) were used with principal component analysis (PCA) to classify the samples and the classifications were validated by leave-one-out-cross-validation (LOOCV) and k-fold cross-validation methods. The normal and tumor tissues were differentiated under the PCA-LDA model with an accuracy of 81.25% (sensitivity: 77.27%, specificity: 86.11%). The PCA-QDA classifier model differentiated these tissues with an accuracy of 87.5% (sensitivity: 90.90%, specificity: 83.33%). The PCA-QDA classifier model outperformed the PCA-LDA-based classifier. The model studies revealed that protein, amino acid, and beta-carotene variations are the main biomolecular difference markers for detecting oral cancer.
- 27 August 2019
- Published by MDPI AG in Journal of Clinical Medicine
- Vol. 8 (9) , 1313
Open AccessRaman Spectroscopy Analysis for Optical Diagnosis of Oral Cancer Detection
Raman spectroscopy (RS) is widely used as a non-invasive technique in screening for the diagnosis of oral cancer. The potential of this optical technique for several biomedical applications has been proved. This work studies the efficacy of RS in detecting oral cancer using sub-site-wise differentiation. A total of 80 samples (44 tumor and 36 normal) were cryopreserved from three different sub-sites: The tongue, the buccal mucosa, and the gingiva of the oral mucosa during surgery. Linear discriminant analysis (LDA) and quadratic discriminant analysis (QDA) were used with principal component analysis (PCA) to classify the samples and the classifications were validated by leave-one-out-cross-validation (LOOCV) and k-fold cross-validation methods. The normal and tumor tissues were differentiated under the PCA-LDA model with an accuracy of 81.25% (sensitivity: 77.27%, specificity: 86.11%). The PCA-QDA classifier model differentiated these tissues with an accuracy of 87.5% (sensitivity: 90.90%, specificity: 83.33%). The PCA-QDA classifier model outperformed the PCA-LDA-based classifier. The model studies revealed that protein, amino acid, and beta-carotene variations are the main biomolecular difference markers for detecting oral cancer.
- Open Access
Deep Etched Gallium Nitride Waveguide for Raman Spectroscopic Applications
Gallium nitride (GaN) materials with a high chemical stability and biocompatibility are well suited for bio-sensing applications and evanescent wave spectroscopy. However, GaN poses challenges for processing, especially for deep etching using conventional etching techniques. Here, we present a dry-etching technique using tetraethyl orthosilicate (TEOS) oxide as an etching barrier. We demonstrate that a sharp, vertically-etched waveguide pattern can be obtained with low surface roughness. The fabricated GaN waveguide structure is further characterized using field-emission scanning electron microscopy, Raman spectroscopy, and a stylus profilometer.
Open AccessDeep Etched Gallium Nitride Waveguide for Raman Spectroscopic Applications
Gallium nitride (GaN) materials with a high chemical stability and biocompatibility are well suited for bio-sensing applications and evanescent wave spectroscopy. However, GaN poses challenges for processing, especially for deep etching using conventional etching techniques. Here, we present a dry-etching technique using tetraethyl orthosilicate (TEOS) oxide as an etching barrier. We demonstrate that a sharp, vertically-etched waveguide pattern can be obtained with low surface roughness. The fabricated GaN waveguide structure is further characterized using field-emission scanning electron microscopy, Raman spectroscopy, and a stylus profilometer.
- 25 April 2018
- Published by Wiley in Physica Status Solidi (a)
- Vol. 215 (16)
Al‐Doped ZnO Nanowires by Electrochemical Deposition for Selective VOC Nanosensor and Nanophotodetector
Nanomaterials for new nanosensor systems with selective detection of hazardous volatile organic compounds (VOCs) vapors are of great demand nowadays. In this paper, the use in nanosensors of electrochemically deposited (ECD) Al‐doped ZnO (ZnO:Al) nanowires (NWs) is reported. The NWs are characterized by micro‐Raman and optical measurements. Individual ZnO and ZnO:Al NWs are integrated into nanosensor devices for room temperature UV and gas sensing. It is shown that, compared to undoped ZnO NW with irreversible response, the doped ZnO:Al NWs have faster response (≈5 s) and recovery (≈55 s), as well as enhanced UV response (≈4.8, about 2 times higher). The room temperature gas sensing investigations demonstrate that an individual ZnO:Al NW can detect volatile organic compounds (VOCs) vapors such as 2‐propanol, n‐butanol and ethanol at room temperature with a relatively fast response time of ≈10 s and a reversible signal (the recovery time being 30–40 s). This shows the possibility to use it with further development as indoor air quality monitor.
- 25 April 2018
- Published by Wiley in Physica Status Solidi (a)
- Vol. 215 (16)
Al‐Doped ZnO Nanowires by Electrochemical Deposition for Selective VOC Nanosensor and Nanophotodetector
Nanomaterials for new nanosensor systems with selective detection of hazardous volatile organic compounds (VOCs) vapors are of great demand nowadays. In this paper, the use in nanosensors of electrochemically deposited (ECD) Al‐doped ZnO (ZnO:Al) nanowires (NWs) is reported. The NWs are characterized by micro‐Raman and optical measurements. Individual ZnO and ZnO:Al NWs are integrated into nanosensor devices for room temperature UV and gas sensing. It is shown that, compared to undoped ZnO NW with irreversible response, the doped ZnO:Al NWs have faster response (≈5 s) and recovery (≈55 s), as well as enhanced UV response (≈4.8, about 2 times higher). The room temperature gas sensing investigations demonstrate that an individual ZnO:Al NW can detect volatile organic compounds (VOCs) vapors such as 2‐propanol, n‐butanol and ethanol at room temperature with a relatively fast response time of ≈10 s and a reversible signal (the recovery time being 30–40 s). This shows the possibility to use it with further development as indoor air quality monitor.
- Open Access
RGB-Stack Light Emitting Diode Modules with Transparent Glass Circuit Board and Oil Encapsulation
The light emitting diode (LED) is widely used in modern solid-state lighting applications, and its output efficiency is closely related to the submounts’ material properties. Most submounts used today, such as low-power printed circuit boards (PCBs) or high-power metal core printed circuit boards (MCPCBs), are not transparent and seriously decrease the output light extraction. To meet the requirements of high light output and better color mixing, a three-dimensional (3-D) stacked flip-chip (FC) LED module is proposed and demonstrated. To realize light penetration and mixing, the mentioned 3-D vertically stacking RGB LEDs use transparent glass as FC package submounts called glass circuit boards (GCB). Light emitted from each GCB stacked LEDs passes through each other and thus exhibits good output efficiency and homogeneous light-mixing characteristics. In this work, the parasitic problem of heat accumulation, which caused by the poor thermal conductivity of GCB and leads to a serious decrease in output efficiency, is solved by a proposed transparent cooling oil encapsulation (OCP) method.
Open AccessRGB-Stack Light Emitting Diode Modules with Transparent Glass Circuit Board and Oil Encapsulation
The light emitting diode (LED) is widely used in modern solid-state lighting applications, and its output efficiency is closely related to the submounts’ material properties. Most submounts used today, such as low-power printed circuit boards (PCBs) or high-power metal core printed circuit boards (MCPCBs), are not transparent and seriously decrease the output light extraction. To meet the requirements of high light output and better color mixing, a three-dimensional (3-D) stacked flip-chip (FC) LED module is proposed and demonstrated. To realize light penetration and mixing, the mentioned 3-D vertically stacking RGB LEDs use transparent glass as FC package submounts called glass circuit boards (GCB). Light emitted from each GCB stacked LEDs passes through each other and thus exhibits good output efficiency and homogeneous light-mixing characteristics. In this work, the parasitic problem of heat accumulation, which caused by the poor thermal conductivity of GCB and leads to a serious decrease in output efficiency, is solved by a proposed transparent cooling oil encapsulation (OCP) method.
- Open Access
Phosphor-Free InGaN White Light Emitting Diodes Using Flip-Chip Technology
Monolithic phosphor-free two-color gallium nitride (GaN)-based white light emitting diodes (LED) have the potential to replace current phosphor-based GaN white LEDs due to their low cost and long life cycle. Unfortunately, the growth of high indium content indium gallium nitride (InGaN)/GaN quantum dot and reported LED’s color rendering index (CRI) are still problematic. Here, we use flip-chip technology to fabricate an upside down monolithic two-color phosphor-free LED with four grown layers of high indium quantum dots on top of the three grown layers of lower indium quantum wells separated by a GaN tunneling barrier layer. The photoluminescence (PL) and electroluminescence (EL) spectra of this white LED reveal a broad spectrum ranging from 475 to 675 nm which is close to an ideal white-light source. The corresponding color temperature and color rendering index (CRI) of the fabricated white LED, operated at 350, 500, and 750 mA, are comparable to that of the conventional phosphor-based LEDs. Insights of the epitaxial structure and the transport mechanism were revealed through the TEM and temperature dependent PL and EL measurements. Our results show true potential in the Epi-ready GaN white LEDs for future solid state lighting applications.
Open AccessPhosphor-Free InGaN White Light Emitting Diodes Using Flip-Chip Technology
Monolithic phosphor-free two-color gallium nitride (GaN)-based white light emitting diodes (LED) have the potential to replace current phosphor-based GaN white LEDs due to their low cost and long life cycle. Unfortunately, the growth of high indium content indium gallium nitride (InGaN)/GaN quantum dot and reported LED’s color rendering index (CRI) are still problematic. Here, we use flip-chip technology to fabricate an upside down monolithic two-color phosphor-free LED with four grown layers of high indium quantum dots on top of the three grown layers of lower indium quantum wells separated by a GaN tunneling barrier layer. The photoluminescence (PL) and electroluminescence (EL) spectra of this white LED reveal a broad spectrum ranging from 475 to 675 nm which is close to an ideal white-light source. The corresponding color temperature and color rendering index (CRI) of the fabricated white LED, operated at 350, 500, and 750 mA, are comparable to that of the conventional phosphor-based LEDs. Insights of the epitaxial structure and the transport mechanism were revealed through the TEM and temperature dependent PL and EL measurements. Our results show true potential in the Epi-ready GaN white LEDs for future solid state lighting applications.
- 8 January 2016
- Published by Springer Nature
- p. 115-118
Single Nanowire Nanosensors: A Case Study of the Effects of Metal Doping on ZnO
- 8 January 2016
- Published by Springer Nature
- p. 115-118
Single Nanowire Nanosensors: A Case Study of the Effects of Metal Doping on ZnO