Kookrin Char
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Kookrin Char has a total of 152 co-authors. Here are the top co-authors by number of shared publications:
Young Mo Kim
Department of Physics and Astronomy, Institute of Applied Physics, Seoul National University, Seoul 08826, Korea
11 shared publicationsChulkwon Park
Institute of Applied Physics, Department of Physics and Astronomy, Seoul National University, Seoul 08826, Korea
9 shared publicationsUseong Kim
Seoul National University 1 Department of Physics and Astronomy, Institute of Applied Physics Seoul 08826, South Korea
9 shared publications- Bongju Kim
Institute of Applied Physics Department of Physics and Astronomy Seoul National University Seoul 08826 Republic of Korea
7 shared publications Juyeon Shin
Institute of Applied Physics, Department of Physics and Astronomy, Seoul National University, Seoul 08826, Korea
7 shared publicationsJaejun Yu
Center for Theoretical Physics, Department of Physics and Astronomy, Seoul National University, Seoul 08826, Republic of Korea
6 shared publications
Latest Publications
- Open Access
- 1 July 2025
- Published by AIP Publishing in APL Materials
- Vol. 13 (7)
Epitaxial integration of perovskite based double-gate field effect transistor with silicon
Silicon-based semiconductors have driven significant advancements following Moore’s law but are now approaching the physical limits. To overcome these challenges, integrating new materials with silicon is emerging as a promising alternative. In this work, we demonstrate the integration and operation of perovskite-oxide-based double-gated field effect transistors (FETs) on silicon. This was done by first growing an epitaxial SrTiO3 buffer layer on silicon using hybrid molecular beam epitaxy and then depositing epitaxial perovskite layers on top of SrTiO3 using pulsed laser deposition. Upon confirming epitaxial growth of SrHfO3 and BaSnO3 on a SrTiO3 buffer layer on silicon, we demonstrate the successful operation of a double-gate FET. As multi-gate has become an essential structure in semiconductor technology, our epitaxial double-gate FET, combined on silicon, displays performance improvements when it evolves from a single bottom gate to a double-gate design. Our work demonstrates a path toward integration of novel perovskite oxides on silicon.
- 1 July 2025
- Published by AIP Publishing in APL Materials
- Vol. 13 (7)
Open AccessEpitaxial integration of perovskite based double-gate field effect transistor with silicon
Silicon-based semiconductors have driven significant advancements following Moore’s law but are now approaching the physical limits. To overcome these challenges, integrating new materials with silicon is emerging as a promising alternative. In this work, we demonstrate the integration and operation of perovskite-oxide-based double-gated field effect transistors (FETs) on silicon. This was done by first growing an epitaxial SrTiO3 buffer layer on silicon using hybrid molecular beam epitaxy and then depositing epitaxial perovskite layers on top of SrTiO3 using pulsed laser deposition. Upon confirming epitaxial growth of SrHfO3 and BaSnO3 on a SrTiO3 buffer layer on silicon, we demonstrate the successful operation of a double-gate FET. As multi-gate has become an essential structure in semiconductor technology, our epitaxial double-gate FET, combined on silicon, displays performance improvements when it evolves from a single bottom gate to a double-gate design. Our work demonstrates a path toward integration of novel perovskite oxides on silicon.
- Open Access
- 27 June 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 35 (51)
Formation of 2D Electron Gas at a Non‐Polar Perovskite Oxide Interface: SrHfO 3 /BaSnO 3
A consistent increase in conductance in La‐doped BaSnO 3 (BLSO) is observed after forming an interface with the non‐polar perovskite SrHfO 3 (SHO). The conductance enhancement at the SHO/BLSO interface is measured as a function of the thickness of the SHO layer and the La doping rate in the BLSO layer. A monotonic increase of conductance as a function of the SHO thickness is observed, unlike the case of polar interfaces of LaInO 3 /BaSnO 3 and LaScO 3 /BaSnO 3 . The first several unit cells of SHO have the most significant impact on conductance. It is also found that the SHO/BLSO interface requires little doping (≈0.2%) to compensate for the deep acceptors in BaSnO 3 . To determine the charge carrier distribution, capacitance–voltage profiling is employed, which indicates that the charge carriers are confined within 1–2 nm of the interface. The observed 2D electron gas behavior at the interface is analyzed using a self‐consistent Poisson‐Schrödinger equation solver. This analysis provides a consistent picture of the SHO thickness and the La‐doping dependence of conductance enhancement at the SHO/BLSO interface, suggesting that the large conduction band offset at the SHO/BLSO interface and the intrinsic deep donor states in SHO are responsible for formation of a potential well in the BLSO side.
- 27 June 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 35 (51)
Open AccessFormation of 2D Electron Gas at a Non‐Polar Perovskite Oxide Interface: SrHfO 3 /BaSnO 3
A consistent increase in conductance in La‐doped BaSnO 3 (BLSO) is observed after forming an interface with the non‐polar perovskite SrHfO 3 (SHO). The conductance enhancement at the SHO/BLSO interface is measured as a function of the thickness of the SHO layer and the La doping rate in the BLSO layer. A monotonic increase of conductance as a function of the SHO thickness is observed, unlike the case of polar interfaces of LaInO 3 /BaSnO 3 and LaScO 3 /BaSnO 3 . The first several unit cells of SHO have the most significant impact on conductance. It is also found that the SHO/BLSO interface requires little doping (≈0.2%) to compensate for the deep acceptors in BaSnO 3 . To determine the charge carrier distribution, capacitance–voltage profiling is employed, which indicates that the charge carriers are confined within 1–2 nm of the interface. The observed 2D electron gas behavior at the interface is analyzed using a self‐consistent Poisson‐Schrödinger equation solver. This analysis provides a consistent picture of the SHO thickness and the La‐doping dependence of conductance enhancement at the SHO/BLSO interface, suggesting that the large conduction band offset at the SHO/BLSO interface and the intrinsic deep donor states in SHO are responsible for formation of a potential well in the BLSO side.
- Open Access
- 12 December 2024
- Published by Wiley in Advanced Electronic Materials
- Vol. 11 (9)
Observation of Mobility Above 2000 cm2/V s in 2DEG at LaInO3/BaSnO3 Interface by Electric‐Double‐Layer Gating
The LaInO3/BaSnO3 heterostructure has recently emerged as a promising platform for realizing 2D electron gas (2DEG) with unique transport properties, including excellent field‐effect at room temperature. However, there is a limit to improving its mobility due to intrinsic defects including the threading dislocations occurring during film growth. In spite of such high density defects at present, as an effort to increase the mobility of the 2DEG, the 2D carrier density to 1014 cm−2 by ionic‐liquid gating is increased and we found the resulting 2DEG mobility enhancement up to 2100 cm2 V−1 s−1 at 10 K, which is consistent with the fact that 2‐dimensionality offers more effective screening for defects. This findings offer insights into the properties of 2DEG formed with perovskite oxide semiconductor BaSnO3 as well as highlight its future potential for applications.
- 12 December 2024
- Published by Wiley in Advanced Electronic Materials
- Vol. 11 (9)
Open AccessObservation of Mobility Above 2000 cm2/V s in 2DEG at LaInO3/BaSnO3 Interface by Electric‐Double‐Layer Gating
The LaInO3/BaSnO3 heterostructure has recently emerged as a promising platform for realizing 2D electron gas (2DEG) with unique transport properties, including excellent field‐effect at room temperature. However, there is a limit to improving its mobility due to intrinsic defects including the threading dislocations occurring during film growth. In spite of such high density defects at present, as an effort to increase the mobility of the 2DEG, the 2D carrier density to 1014 cm−2 by ionic‐liquid gating is increased and we found the resulting 2DEG mobility enhancement up to 2100 cm2 V−1 s−1 at 10 K, which is consistent with the fact that 2‐dimensionality offers more effective screening for defects. This findings offer insights into the properties of 2DEG formed with perovskite oxide semiconductor BaSnO3 as well as highlight its future potential for applications.
- 25 November 2024
- Published by IOP Publishing in Nanotechnology
- Vol. 36 (6) , 060201
Focus on Institute of Applied Physics at Seoul National University
- 25 November 2024
- Published by IOP Publishing in Nanotechnology
- Vol. 36 (6) , 060201
Focus on Institute of Applied Physics at Seoul National University
- 7 August 2024
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 8 (8) , 084402
Ferroelectric switching and field effect of onFerroelectric field-effect transistors offer a potential for its important role in integrated memory and computing systems, and research on them is actively ongoing. In this study, we investigated the ferroelectric properties of , which is lattice matched with the La-doped high mobility perovskite oxide semiconductor . Growth of the phase in epitaxial on was confirmed and its basic ferroelectric and dielectric properties were studied by polarization-electric and capacitance-voltage measurement. We then studied the field effect of on the electrical properties of as we vary the La doping concentration. We find that the field effect of on is determined by competition between its ferroelectric and dielectric properties, depending on the La doping concentration. In high La doping rates, the field effect is dominated by the ferroelectric switching while in lower La doping rates, the effect is mainly by dielectric response as the depolarization field in the depleted layer weakens the ferroelectric effect. As per the width and direction of the hysteresis, it is also controlled by the competition between the counterclockwise ferroelectric response and the clockwise dielectric response due to the trapped charges near the interface. This study offers insights into optimizing the field effect by understanding the complex interplay between ferroelectric materials and low carrier density semiconductors.- 7 August 2024
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 8 (8) , 084402
Ferroelectric switching and field effect of onFerroelectric field-effect transistors offer a potential for its important role in integrated memory and computing systems, and research on them is actively ongoing. In this study, we investigated the ferroelectric properties of , which is lattice matched with the La-doped high mobility perovskite oxide semiconductor . Growth of the phase in epitaxial on was confirmed and its basic ferroelectric and dielectric properties were studied by polarization-electric and capacitance-voltage measurement. We then studied the field effect of on the electrical properties of as we vary the La doping concentration. We find that the field effect of on is determined by competition between its ferroelectric and dielectric properties, depending on the La doping concentration. In high La doping rates, the field effect is dominated by the ferroelectric switching while in lower La doping rates, the effect is mainly by dielectric response as the depolarization field in the depleted layer weakens the ferroelectric effect. As per the width and direction of the hysteresis, it is also controlled by the competition between the counterclockwise ferroelectric response and the clockwise dielectric response due to the trapped charges near the interface. This study offers insights into optimizing the field effect by understanding the complex interplay between ferroelectric materials and low carrier density semiconductors.- Open Access
- 22 March 2024
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (37) , 2402059
Epitaxially Stacked 12‐Layer Perovskite Oxide Heterostructure as a Double‐Level Double‐Gate Field‐Effect Transistor
Perovskite oxide semiconductor is unique for its capability to form epitaxial heterostructures with both dielectric and metallic perovskite oxides. The study underscores the potential of perovskite oxides for multi‐layer stacking, a key aspect in advancing semiconductor technology as silicon‐based devices evolve toward 3D stacked structures. Fabrication of the first double‐level double‐gate field‐effect transistors (DL DG‐FETs) is demonstrated, where each layer is epitaxially grown using all‐perovskite oxides. This resulted in improvements in subthreshold swing, current drivability, and field effect mobility. This innovation not only highlights the distinctive potential of perovskite oxides but also provides new avenues for integration with other perovskite oxides on Si for more advanced electronic functions.
- 22 March 2024
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (37) , 2402059
Open AccessEpitaxially Stacked 12‐Layer Perovskite Oxide Heterostructure as a Double‐Level Double‐Gate Field‐Effect Transistor
Perovskite oxide semiconductor is unique for its capability to form epitaxial heterostructures with both dielectric and metallic perovskite oxides. The study underscores the potential of perovskite oxides for multi‐layer stacking, a key aspect in advancing semiconductor technology as silicon‐based devices evolve toward 3D stacked structures. Fabrication of the first double‐level double‐gate field‐effect transistors (DL DG‐FETs) is demonstrated, where each layer is epitaxially grown using all‐perovskite oxides. This resulted in improvements in subthreshold swing, current drivability, and field effect mobility. This innovation not only highlights the distinctive potential of perovskite oxides but also provides new avenues for integration with other perovskite oxides on Si for more advanced electronic functions.
- Open Access
- 1 December 2023
- Published by AIP Publishing in APL Materials
- Vol. 11 (12)
Selective chemical etching for termination layer control of BaSnO3 and 2DEG formation at the LaInO3/BaSnO3 interface
An ex situ chemical etching method was developed to achieve a SnO2-terminated surface in BaSnO3 films. An SnO2-terminated surface is crucial for the formation of a (LaO)+/(SnO2)0 interface structure to form the two-dimensional electron gas (2DEG) state at the LaInO3 (LIO)/BaSnO3 (BSO) interface. By employing a 9:1 mixture of acetone and water, the etching rate of the surface barium oxide (BaO) layer could be effectively controlled, taking advantage of the solubility of BaO in water. To determine the optimal etching conditions, we investigated the relationship between the etching time and the resulting 2DEG conductance. The optimum times for maximizing the conductance of the 2DEG state were found to be 90 s on SrTiO3 substrates and 40 s on MgO substrates, generating a higher conductance than the in situ SnO2 dusting method reported earlier. The surface properties before and after the chemical etching were analyzed by angle reserved x-ray photoelectron spectroscopy.
- 1 December 2023
- Published by AIP Publishing in APL Materials
- Vol. 11 (12)
Open AccessSelective chemical etching for termination layer control of BaSnO3 and 2DEG formation at the LaInO3/BaSnO3 interface
An ex situ chemical etching method was developed to achieve a SnO2-terminated surface in BaSnO3 films. An SnO2-terminated surface is crucial for the formation of a (LaO)+/(SnO2)0 interface structure to form the two-dimensional electron gas (2DEG) state at the LaInO3 (LIO)/BaSnO3 (BSO) interface. By employing a 9:1 mixture of acetone and water, the etching rate of the surface barium oxide (BaO) layer could be effectively controlled, taking advantage of the solubility of BaO in water. To determine the optimal etching conditions, we investigated the relationship between the etching time and the resulting 2DEG conductance. The optimum times for maximizing the conductance of the 2DEG state were found to be 90 s on SrTiO3 substrates and 40 s on MgO substrates, generating a higher conductance than the in situ SnO2 dusting method reported earlier. The surface properties before and after the chemical etching were analyzed by angle reserved x-ray photoelectron spectroscopy.
- Open Access
- 15 October 2023
- Published by Wiley in Advanced Electronic Materials
- Vol. 10 (1)
Fully Deep‐UV Transparent Thin Film Transistors Based on SrSnO3
Ultra‐wide bandgap semiconductors are gaining attention for their promising properties for UV optoelectronics and UV transparent electronics as well as high‐power applications. Among them, La‐doped SrSnO3 exhibits excellent properties both for deep‐UV transparent oxide semiconductors and deep‐UV transparent conducting oxide. Here, the demonstration of thin film transistors (TFTs) with full deep‐UV transparency is reported, including electrodes, gate oxide, and substrate. The lightly La‐doped SrSnO3 for the channel layer is grown on MgO (100) substrates with buffer layers by pulsed laser deposition. TFTs with a metal—insulator–semiconductor structure are fabricated using high‐k perovskite dielectric LaScO3 as the gate oxide. A degenerately La‐doped SrSnO3 is used as the gate, the source, and the drain electrodes to obtain good ohmic contact with the channel layer as well as UV transparency. The resultant device shows a field effect mobility value of ≈24 cm2 V−1 s−1 and an on/off ratio >106. The optical transmittance of the entire device (including the substrate) is found to be >75% at 300 nm in wavelength. Furthermore, the electrical characteristics of the device exhibit excellent stability under visible irradiation. This research highlights the potential of SrSnO3 in advancing the field of UV optoelectronics and UV transparent electronics.
- 15 October 2023
- Published by Wiley in Advanced Electronic Materials
- Vol. 10 (1)
Open AccessFully Deep‐UV Transparent Thin Film Transistors Based on SrSnO3
Ultra‐wide bandgap semiconductors are gaining attention for their promising properties for UV optoelectronics and UV transparent electronics as well as high‐power applications. Among them, La‐doped SrSnO3 exhibits excellent properties both for deep‐UV transparent oxide semiconductors and deep‐UV transparent conducting oxide. Here, the demonstration of thin film transistors (TFTs) with full deep‐UV transparency is reported, including electrodes, gate oxide, and substrate. The lightly La‐doped SrSnO3 for the channel layer is grown on MgO (100) substrates with buffer layers by pulsed laser deposition. TFTs with a metal—insulator–semiconductor structure are fabricated using high‐k perovskite dielectric LaScO3 as the gate oxide. A degenerately La‐doped SrSnO3 is used as the gate, the source, and the drain electrodes to obtain good ohmic contact with the channel layer as well as UV transparency. The resultant device shows a field effect mobility value of ≈24 cm2 V−1 s−1 and an on/off ratio >106. The optical transmittance of the entire device (including the substrate) is found to be >75% at 300 nm in wavelength. Furthermore, the electrical characteristics of the device exhibit excellent stability under visible irradiation. This research highlights the potential of SrSnO3 in advancing the field of UV optoelectronics and UV transparent electronics.
- Open Access
- 17 April 2023
- Published by Wiley in Advanced Electronic Materials
- Vol. 9 (6)
Low Leakage in High‐k Perovskite Gate Oxide SrHfO3
Reducing the leakage current through the gate oxide is becoming increasingly important for power consumption reduction as well as reliability in integrated circuits as the semiconducting devices continue to scale down. Here, this work reports on the high‐k dielectric SrHfO3 (SHO) based devices with ultralow leakage current density via pulsed laser deposition (PLD). The ultralow current density is achieved by optimizing the growth conditions and the associated structural properties. In the optimized conditions, the dielectric properties of the 50‐nm‐thick SHO capacitors are measured: high dielectric constant (κ = 32), low leakage current density ( 4 MV cm−1). The surprisingly low leakage current density of SHO is ascribed to the large bandgap (≈6 eV), the large conduction band offset (CB offset > 3 eV) with respect to the semiconductor, and the low density of defect states inside the bandgap. The optimized SHO dielectric with high dielectric constant and ultralow leakage current density is proposed for future low‐power consumption devices based on Si as well as perovskite oxide semiconductors.
- 17 April 2023
- Published by Wiley in Advanced Electronic Materials
- Vol. 9 (6)
Open AccessLow Leakage in High‐k Perovskite Gate Oxide SrHfO3
Reducing the leakage current through the gate oxide is becoming increasingly important for power consumption reduction as well as reliability in integrated circuits as the semiconducting devices continue to scale down. Here, this work reports on the high‐k dielectric SrHfO3 (SHO) based devices with ultralow leakage current density via pulsed laser deposition (PLD). The ultralow current density is achieved by optimizing the growth conditions and the associated structural properties. In the optimized conditions, the dielectric properties of the 50‐nm‐thick SHO capacitors are measured: high dielectric constant (κ = 32), low leakage current density ( 4 MV cm−1). The surprisingly low leakage current density of SHO is ascribed to the large bandgap (≈6 eV), the large conduction band offset (CB offset > 3 eV) with respect to the semiconductor, and the low density of defect states inside the bandgap. The optimized SHO dielectric with high dielectric constant and ultralow leakage current density is proposed for future low‐power consumption devices based on Si as well as perovskite oxide semiconductors.
- Open Access
- 26 October 2022
- Published by Wiley in Advanced Materials Interfaces
- Vol. 9 (35)
Confinement of Electrons at the LaInO3/BaSnO3 Heterointerface
The properties of the conductance at the LaInO3/BaSnO3 heterointerface are reported. The heterointerface is formed by covering the semi‐insulating BaSnO3:La thin films with 10 nm LaInO3 films, which are all epitaxially grown on NdScO3 substrates. Structural properties of BaSnO3 thin films are investigated by means of X‐ray diffraction and transmission electron microscopy and exhibit a threading dislocation density of 6 × 1010 cm−2. Via capacitance–voltage (C–V) measurements, clear evidence is present for the accumulation of electrons at the interface within 2.5 nm in the BaSnO3 layer, confirming the formation of a 2D electron gas (2DEG). Additionally, temperature dependent Hall effect measurements reveal a semiconducting behavior of the electron density of the 2DEGs. The room temperature mobility of 22 cm2 V−1 s−1 at an electron density of 4 × 1013 cm−2 is found to increase as the temperature decreases to 25 K.
- 26 October 2022
- Published by Wiley in Advanced Materials Interfaces
- Vol. 9 (35)
Open AccessConfinement of Electrons at the LaInO3/BaSnO3 Heterointerface
The properties of the conductance at the LaInO3/BaSnO3 heterointerface are reported. The heterointerface is formed by covering the semi‐insulating BaSnO3:La thin films with 10 nm LaInO3 films, which are all epitaxially grown on NdScO3 substrates. Structural properties of BaSnO3 thin films are investigated by means of X‐ray diffraction and transmission electron microscopy and exhibit a threading dislocation density of 6 × 1010 cm−2. Via capacitance–voltage (C–V) measurements, clear evidence is present for the accumulation of electrons at the interface within 2.5 nm in the BaSnO3 layer, confirming the formation of a 2D electron gas (2DEG). Additionally, temperature dependent Hall effect measurements reveal a semiconducting behavior of the electron density of the 2DEGs. The room temperature mobility of 22 cm2 V−1 s−1 at an electron density of 4 × 1013 cm−2 is found to increase as the temperature decreases to 25 K.