Bongju Kim
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Bongju Kim has a total of 42 co-authors. Here are the top co-authors by number of shared publications:
- Kookrin Char
Institute of Applied Physics Department of Physics and Astronomy Seoul National University Seoul 08826 South Korea
7 shared publications - Jaehyeok Lee
Institute of Applied Physics Department of Physics and Astronomy Seoul National University Seoul 08826 Republic of Korea
4 shared publications - Hyeongmin Cho
Institute of Applied Physics Department of Physics and Astronomy Seoul National University Seoul 08826 South Korea
3 shared publications - Jae Hoon Kim
Department of Physics, Yonsei University, Seoul, Republic of Korea
3 shared publications - Juhan Kim
Institute of Applied Physics Department of Physics and Astronomy Seoul National University Seoul 08826 Republic of Korea
3 shared publications - Minu Kim
Max Planck Institute for Solid State Research, Heisenbergstrasse 1, 70569 Stuttgart, Germany
3 shared publications
Latest Publications
- 19 October 2026
- Published by Springer Nature in Journal of the Korean Physical Society
- p. 1-8
Phase evolution and transport in reduced WO3 single crystals
- 19 October 2026
- Published by Springer Nature in Journal of the Korean Physical Society
- p. 1-8
Phase evolution and transport in reduced WO3 single crystals
- 12 October 2026
- Published by Elsevier in Current Applied Physics
- Vol. 93, 110-116
Effects of oxygen non-stoichiometry on ligand holes and the electronic state in the bilayer nickelate La3Ni2O7±δ
- 12 October 2026
- Published by Elsevier in Current Applied Physics
- Vol. 93, 110-116
Effects of oxygen non-stoichiometry on ligand holes and the electronic state in the bilayer nickelate La3Ni2O7±δ
- 7 October 2026
- Published by Elsevier in Current Applied Physics
- Vol. 93, 66-72
Toward superconducting bilayer nickelates: growth of compressively strained La2PrNi2O7 thin films
- 7 October 2026
- Published by Elsevier in Current Applied Physics
- Vol. 93, 66-72
Toward superconducting bilayer nickelates: growth of compressively strained La2PrNi2O7 thin films
- Open Access
- 12 December 2024
- Published by Wiley in Advanced Electronic Materials
- Vol. 11 (9)
Observation of Mobility Above 2000 cm2/V s in 2DEG at LaInO3/BaSnO3 Interface by Electric‐Double‐Layer Gating
The LaInO3/BaSnO3 heterostructure has recently emerged as a promising platform for realizing 2D electron gas (2DEG) with unique transport properties, including excellent field‐effect at room temperature. However, there is a limit to improving its mobility due to intrinsic defects including the threading dislocations occurring during film growth. In spite of such high density defects at present, as an effort to increase the mobility of the 2DEG, the 2D carrier density to 1014 cm−2 by ionic‐liquid gating is increased and we found the resulting 2DEG mobility enhancement up to 2100 cm2 V−1 s−1 at 10 K, which is consistent with the fact that 2‐dimensionality offers more effective screening for defects. This findings offer insights into the properties of 2DEG formed with perovskite oxide semiconductor BaSnO3 as well as highlight its future potential for applications.
- 12 December 2024
- Published by Wiley in Advanced Electronic Materials
- Vol. 11 (9)
Open AccessObservation of Mobility Above 2000 cm2/V s in 2DEG at LaInO3/BaSnO3 Interface by Electric‐Double‐Layer Gating
The LaInO3/BaSnO3 heterostructure has recently emerged as a promising platform for realizing 2D electron gas (2DEG) with unique transport properties, including excellent field‐effect at room temperature. However, there is a limit to improving its mobility due to intrinsic defects including the threading dislocations occurring during film growth. In spite of such high density defects at present, as an effort to increase the mobility of the 2DEG, the 2D carrier density to 1014 cm−2 by ionic‐liquid gating is increased and we found the resulting 2DEG mobility enhancement up to 2100 cm2 V−1 s−1 at 10 K, which is consistent with the fact that 2‐dimensionality offers more effective screening for defects. This findings offer insights into the properties of 2DEG formed with perovskite oxide semiconductor BaSnO3 as well as highlight its future potential for applications.
- Open Access
- 1 December 2023
- Published by AIP Publishing in APL Materials
- Vol. 11 (12)
Selective chemical etching for termination layer control of BaSnO3 and 2DEG formation at the LaInO3/BaSnO3 interface
An ex situ chemical etching method was developed to achieve a SnO2-terminated surface in BaSnO3 films. An SnO2-terminated surface is crucial for the formation of a (LaO)+/(SnO2)0 interface structure to form the two-dimensional electron gas (2DEG) state at the LaInO3 (LIO)/BaSnO3 (BSO) interface. By employing a 9:1 mixture of acetone and water, the etching rate of the surface barium oxide (BaO) layer could be effectively controlled, taking advantage of the solubility of BaO in water. To determine the optimal etching conditions, we investigated the relationship between the etching time and the resulting 2DEG conductance. The optimum times for maximizing the conductance of the 2DEG state were found to be 90 s on SrTiO3 substrates and 40 s on MgO substrates, generating a higher conductance than the in situ SnO2 dusting method reported earlier. The surface properties before and after the chemical etching were analyzed by angle reserved x-ray photoelectron spectroscopy.
- 1 December 2023
- Published by AIP Publishing in APL Materials
- Vol. 11 (12)
Open AccessSelective chemical etching for termination layer control of BaSnO3 and 2DEG formation at the LaInO3/BaSnO3 interface
An ex situ chemical etching method was developed to achieve a SnO2-terminated surface in BaSnO3 films. An SnO2-terminated surface is crucial for the formation of a (LaO)+/(SnO2)0 interface structure to form the two-dimensional electron gas (2DEG) state at the LaInO3 (LIO)/BaSnO3 (BSO) interface. By employing a 9:1 mixture of acetone and water, the etching rate of the surface barium oxide (BaO) layer could be effectively controlled, taking advantage of the solubility of BaO in water. To determine the optimal etching conditions, we investigated the relationship between the etching time and the resulting 2DEG conductance. The optimum times for maximizing the conductance of the 2DEG state were found to be 90 s on SrTiO3 substrates and 40 s on MgO substrates, generating a higher conductance than the in situ SnO2 dusting method reported earlier. The surface properties before and after the chemical etching were analyzed by angle reserved x-ray photoelectron spectroscopy.
- Open Access
- 17 April 2023
- Published by Wiley in Advanced Electronic Materials
- Vol. 9 (6)
Low Leakage in High‐k Perovskite Gate Oxide SrHfO3
Reducing the leakage current through the gate oxide is becoming increasingly important for power consumption reduction as well as reliability in integrated circuits as the semiconducting devices continue to scale down. Here, this work reports on the high‐k dielectric SrHfO3 (SHO) based devices with ultralow leakage current density via pulsed laser deposition (PLD). The ultralow current density is achieved by optimizing the growth conditions and the associated structural properties. In the optimized conditions, the dielectric properties of the 50‐nm‐thick SHO capacitors are measured: high dielectric constant (κ = 32), low leakage current density ( 4 MV cm−1). The surprisingly low leakage current density of SHO is ascribed to the large bandgap (≈6 eV), the large conduction band offset (CB offset > 3 eV) with respect to the semiconductor, and the low density of defect states inside the bandgap. The optimized SHO dielectric with high dielectric constant and ultralow leakage current density is proposed for future low‐power consumption devices based on Si as well as perovskite oxide semiconductors.
- 17 April 2023
- Published by Wiley in Advanced Electronic Materials
- Vol. 9 (6)
Open AccessLow Leakage in High‐k Perovskite Gate Oxide SrHfO3
Reducing the leakage current through the gate oxide is becoming increasingly important for power consumption reduction as well as reliability in integrated circuits as the semiconducting devices continue to scale down. Here, this work reports on the high‐k dielectric SrHfO3 (SHO) based devices with ultralow leakage current density via pulsed laser deposition (PLD). The ultralow current density is achieved by optimizing the growth conditions and the associated structural properties. In the optimized conditions, the dielectric properties of the 50‐nm‐thick SHO capacitors are measured: high dielectric constant (κ = 32), low leakage current density ( 4 MV cm−1). The surprisingly low leakage current density of SHO is ascribed to the large bandgap (≈6 eV), the large conduction band offset (CB offset > 3 eV) with respect to the semiconductor, and the low density of defect states inside the bandgap. The optimized SHO dielectric with high dielectric constant and ultralow leakage current density is proposed for future low‐power consumption devices based on Si as well as perovskite oxide semiconductors.
- 3 October 2022
- Published by AIP Publishing in Applied Physics Letters
- Vol. 121 (14) , 142102
Low resistance epitaxial edge contacts to buried nanometer thick conductive layers of BaSnO3
As the size of the semiconductor device decreases, the importance of the low resistance contacts to devices cannot be overstated. Here, we studied the contact resistance to buried nanometer thick δ-doped Ba1-xLaxSnO3 (BLSO) layers. We have used epitaxial 4% (x = 0.04) BLSO as a contact material, which has additional advantages of forming Ohmic contacts to BaSnO3 and providing thermal stability even at high temperatures. The contact resistance was measured by a modified transmission line method designed to eliminate the contribution from the resistance of the contact material. The upper bound for the contact resistance to a 12 nm thick δ-doped 1% BLSO conductive layer was measured to be 1.25 × 10−1or 2.87 × 10−7 Ω cm2. Our results show that it is possible to provide low resistance epitaxial edge contacts to an embedded nanometer-thick BLSO conductive layer using an ion-milling process. Our low resistance contact method can be easily extended to a two-dimensional electron gas at the oxide interfaces such as LaInO3/BaSnO3.
- 3 October 2022
- Published by AIP Publishing in Applied Physics Letters
- Vol. 121 (14) , 142102
Low resistance epitaxial edge contacts to buried nanometer thick conductive layers of BaSnO3
As the size of the semiconductor device decreases, the importance of the low resistance contacts to devices cannot be overstated. Here, we studied the contact resistance to buried nanometer thick δ-doped Ba1-xLaxSnO3 (BLSO) layers. We have used epitaxial 4% (x = 0.04) BLSO as a contact material, which has additional advantages of forming Ohmic contacts to BaSnO3 and providing thermal stability even at high temperatures. The contact resistance was measured by a modified transmission line method designed to eliminate the contribution from the resistance of the contact material. The upper bound for the contact resistance to a 12 nm thick δ-doped 1% BLSO conductive layer was measured to be 1.25 × 10−1or 2.87 × 10−7 Ω cm2. Our results show that it is possible to provide low resistance epitaxial edge contacts to an embedded nanometer-thick BLSO conductive layer using an ion-milling process. Our low resistance contact method can be easily extended to a two-dimensional electron gas at the oxide interfaces such as LaInO3/BaSnO3.
- 30 September 2022
- Published by Wiley in Advanced Materials Interfaces
- Vol. 9 (32)
Critical Role of Terminating Layer in Formation of 2DEG State at the LaInO3/BaSnO3 Interface
Based on the interface polarization model, the 2D electron gas (2DEG) at LaInO3(LIO)/BaSnO3(BSO) interfaces is understood to originate from a polarization discontinuity at the interface and the conduction band offset between LIO and BSO. In this scenario, the direction of polarization at the interface is determined by whether the first atomic LIO layer at the interface is LaO+ or InO2−. The role of the terminating layer is investigated at the LIO/BSO interface in creating the 2DEG. Based on conductance measurements of the in situ grown LIO/BSO heterostructures, it has been reported in this work that the 2DEG only forms when the BSO surface is terminated mainly with a SnO2 layer. The terminating layer is controlled by additional SnO2 deposition on the BSO surface. It has been shown that the as‐grown BSO surface has a mixed terminating layer of BaO and SnO2 while the BSO surfaces prepared with additional SnO2 deposition are terminated mainly with the SnO2 layer. The terminating layer is confirmed by coaxial impact collision ion scattering spectroscopy. The finding is consistent with the interface polarization model for 2DEG formation at LIO/BSO interfaces, in which the direction of the interfacial polarization in LIO is determined by the terminating layer of the BSO surface.
- 30 September 2022
- Published by Wiley in Advanced Materials Interfaces
- Vol. 9 (32)
Critical Role of Terminating Layer in Formation of 2DEG State at the LaInO3/BaSnO3 Interface
Based on the interface polarization model, the 2D electron gas (2DEG) at LaInO3(LIO)/BaSnO3(BSO) interfaces is understood to originate from a polarization discontinuity at the interface and the conduction band offset between LIO and BSO. In this scenario, the direction of polarization at the interface is determined by whether the first atomic LIO layer at the interface is LaO+ or InO2−. The role of the terminating layer is investigated at the LIO/BSO interface in creating the 2DEG. Based on conductance measurements of the in situ grown LIO/BSO heterostructures, it has been reported in this work that the 2DEG only forms when the BSO surface is terminated mainly with a SnO2 layer. The terminating layer is controlled by additional SnO2 deposition on the BSO surface. It has been shown that the as‐grown BSO surface has a mixed terminating layer of BaO and SnO2 while the BSO surfaces prepared with additional SnO2 deposition are terminated mainly with the SnO2 layer. The terminating layer is confirmed by coaxial impact collision ion scattering spectroscopy. The finding is consistent with the interface polarization model for 2DEG formation at LIO/BSO interfaces, in which the direction of the interfacial polarization in LIO is determined by the terminating layer of the BSO surface.
- Open Access
- 11 July 2022
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 4 (7) , 3623-3631
Deep-UV Transparent Conducting Oxide La-Doped SrSnO3 with a High Figure of Merit
Perovskite stannate SrSnO3 (SSO) is attracting attention as ultraviolet transparent conducting oxides (UV TCOs) due to its ultrawide band gap and high conductivity. Here, we investigate in detail the thickness-dependent electrical, structural, and optical properties of sequentially strain-relaxed La-doped SrSnO3 (SLSO) epitaxial thin films. We find that the SLSO films grow as an orthorhombic Pnma phase with a - a - c + in the c + direction under the tensile strain. With the strain relaxation, as the films become thicker, vertical grain boundaries are created and the orthorhombic phase becomes reoriented to all three possible orientations. Simultaneously, the conductance starts to deviate from the linear behavior with increasing film thickness. Through the analysis of thickness fringes in optical transmittance, we found that a 120 nm thick nominally 4% La-doped SrSnO3 film has a figure of merit (φTC = 2.65 × 10-3 Ω-1) at λ = 300 nm in the deep-UV region, which is the highest value among the well-known candidates for UV TCOs reported to date.
- 11 July 2022
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 4 (7) , 3623-3631
Open AccessDeep-UV Transparent Conducting Oxide La-Doped SrSnO3 with a High Figure of Merit
Perovskite stannate SrSnO3 (SSO) is attracting attention as ultraviolet transparent conducting oxides (UV TCOs) due to its ultrawide band gap and high conductivity. Here, we investigate in detail the thickness-dependent electrical, structural, and optical properties of sequentially strain-relaxed La-doped SrSnO3 (SLSO) epitaxial thin films. We find that the SLSO films grow as an orthorhombic Pnma phase with a - a - c + in the c + direction under the tensile strain. With the strain relaxation, as the films become thicker, vertical grain boundaries are created and the orthorhombic phase becomes reoriented to all three possible orientations. Simultaneously, the conductance starts to deviate from the linear behavior with increasing film thickness. Through the analysis of thickness fringes in optical transmittance, we found that a 120 nm thick nominally 4% La-doped SrSnO3 film has a figure of merit (φTC = 2.65 × 10-3 Ω-1) at λ = 300 nm in the deep-UV region, which is the highest value among the well-known candidates for UV TCOs reported to date.
- Open Access
- 18 March 2022
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 8 (11) , eabm3962
High- k perovskite gate oxide for modulation beyond 10 14 cm −2
Scaling down of semiconductor devices requires high- k dielectric materials to continue lowering the operating voltage of field-effect transistors (FETs) and storing sufficient charge on a smaller area. Here, we investigate the dielectric properties of epitaxial BaHf 0.6 Ti 0.4 O 3 (BHTO), an alloy of perovskite oxide barium hafnate (BaHfO 3 ) and barium titanate (BaTiO 3 ). We found the dielectric constant, the breakdown field, and the leakage current to be 150, 5.0 megavolts per centimeter (MV cm −1 ), and 10 −4 amperes per square centimeter at 2 MV cm −1 , respectively. The results suggest that two-dimensional (2D) carrier density of more than n 2D = 10 14 per square centimeter (cm −2 ) could be modulated by the BHTO gate oxide. We demonstrate an n-type accumulation mode FET and direct suppression of more than n 2D = 10 14 cm −2 via an n-type depletion-mode FET. We attribute the large dielectric constant, high breakdown field, and low leakage current of BHTO to the nanometer scale stoichiometric modulation of hafnium and titanium.
- 18 March 2022
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 8 (11) , eabm3962
Open AccessHigh- k perovskite gate oxide for modulation beyond 10 14 cm −2
Scaling down of semiconductor devices requires high- k dielectric materials to continue lowering the operating voltage of field-effect transistors (FETs) and storing sufficient charge on a smaller area. Here, we investigate the dielectric properties of epitaxial BaHf 0.6 Ti 0.4 O 3 (BHTO), an alloy of perovskite oxide barium hafnate (BaHfO 3 ) and barium titanate (BaTiO 3 ). We found the dielectric constant, the breakdown field, and the leakage current to be 150, 5.0 megavolts per centimeter (MV cm −1 ), and 10 −4 amperes per square centimeter at 2 MV cm −1 , respectively. The results suggest that two-dimensional (2D) carrier density of more than n 2D = 10 14 per square centimeter (cm −2 ) could be modulated by the BHTO gate oxide. We demonstrate an n-type accumulation mode FET and direct suppression of more than n 2D = 10 14 cm −2 via an n-type depletion-mode FET. We attribute the large dielectric constant, high breakdown field, and low leakage current of BHTO to the nanometer scale stoichiometric modulation of hafnium and titanium.