LMLuís Carlos de Morais

Luís Carlos de Morais

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Luís Carlos de Morais has a total of 101 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Electrospun Poly(vinyl alcohol) Composites Containing pH-Fractionated Kraft Lignin: Structural Characterization, Biocompatibility, and Immunomodulation

    by Chamberttan Souza Desidério, Hugo Felix Perini, Beatriz Sodré Matos, Antônio Aprigio da Silva Curvelo, Marcos Vinicius da Silva, Carlo José Freire Oliveira, Luís Carlos de Morais

    Lignin and its derivatives exhibit attractive physicochemical and biological properties, including antioxidant, antimicrobial, and immunomodulatory activities; however, the relationship between lignin fractionation conditions and these biological effects remains poorly understood. Filling this gap is fundamental for the advancement of lignin-based materials in biomedical applications. In this study, Kraft lignin was fractionated by precipitation at three pH values (2, 5, and 8) and incorporated into poly­(vinyl alcohol) (PVA) matrices, which were subsequently processed by electrospinning. The components and the resulting composites were systematically characterized in terms of molar mass distribution, chemical structure, surface morphology, and colloidal properties using GPC, FTIR, SEM, zeta potential, and particle size analyses. The results demonstrated that pH-controlled fractionation significantly altered the molecular characteristics of lignin, dispersion behavior, surface charge, and filament morphologies. Notably, the lignin fraction obtained at pH 5 exhibited a favorable balance between particle size and colloidal stability, 339 nm and −38 mV, respectively. Biological evaluation revealed that all composites were cytocompatible with Vero cells, showing no significant reduction (less than 10%) in cell viability after 24 h of exposure. In contrast, immunological assays using human peripheral blood mononuclear cells (PBMCs) revealed distinct pH-dependent immune responses. The composite containing lignin fractionated at pH 5 preserved cell viability and selectively increased TNF-α production (p-value = 0.0008) without affecting IL-10 levels (p-value >0.05), indicating a controlled pro-inflammatory response. Overall, these results demonstrate that pH-guided fractionation is an effective strategy for adjusting the physicochemical and immunological behavior of electrospun PVA/lignin composites and identify the PVA-lignin system fractionated at pH 5 as a promising platform for biomedical applications requiring immunological modulation.

  • MINEIRIDADE NO ENSINO DE QUÍMICA: SAB(E/O)RES E TRANSFORMAÇÕES NO PREPARO DO PÃO DE QUEIJO

    by Júlio César Pereira da Silva, Luis Felipe Servino Ferreira, Bianca Fernanda Corrêa, Thiago Henrique Barnabé Corrêa, Luís Carlos de Morais

    O presente capítulo apresenta uma abordagem interdisciplinar para o ensino de Química por meio da valorização da cultura e da tradição culinária de Minas Gerais, com ênfase na produção do queijo e do pão de queijo como símbolos da identidade mineira. Discute-se como os conhecimentos químicos e bioquímicos envolvidos na produção desses alimentos podem favorecer a contextualização e a aprendizagem significativa. São abordadas as bases científicas da fermentação láctica, destacando a atuação das bactérias ácido-láticas e sua relevância para a conservação, o sabor, a textura e a maturação do queijo, bem como aspectos físico-químicos relacionados à coagulação da caseína, à formação da coalhada, à lipólise e à proteólise. No preparo do pão de queijo, analisam-se a gelatinização do amido, a desnaturação proteica, a retenção de gases e a expansão provocada pelo vapor de água durante o assamento. Também são mobilizados conceitos como equilíbrio químico, propriedades coloidais e pressão de vapor. Ao aproximar ciência, cultura e cotidiano, evidencia-se as práticas culinárias tradicionais como possibilidades didáticas para o ensino contextualizado de Química, favorecendo a produção de significados e fortalecendo a relação dos estudantes com o conhecimento científico a partir de suas experiências culturais e identitárias.

  • Open Access

    Correction to “Nano- and Microstructured Systems for Controlled Release of Agricultural Inputs: Innovations for Efficiency and Sustainability”

    by Aline Rombega Tito Rosa, Renato Farias Do Valle Júnior, Marcos Vinicius da Silva, Hugo Felix Perini, Carlo José Freire Oliveira, Rodrigo César Rosa, Antonio Carlos Shimano, Anielle Christine Almeida Silva, Luís Carlos de Morais

  • Open Access

    Nano- and Microstructured Systems for Controlled Release of Agricultural Inputs: Innovations for Efficiency and Sustainability

    by Aline Rombega Tito Rosa, Renato Farias Do Valle Jr., Marcos Vinicius da Silva, Hugo Felix Perini, Carlo José Freire Oliveira, Rodrigo César Rosa, Antonio Carlos Shimano, Anielle Christine Almeida Silva, Luís Carlos de Morais

    Nano and microstructured systems for the controlled release of agricultural inputs represent a significant advancement in sustainable agriculture. These technologies enable the encapsulation of nutrients and pesticides, ensuring gradual and targeted delivery while reducing waste and enhancing plant absorption. Biodegradable materials, such as chitosan and alginate, offer eco-friendly solutions that improve efficiency under challenging conditions, including salinity and drought. Recent innovations have led to increased crop productivity, reduced pesticide application, and improved soil remediation. For example, nanoparticles can adsorb heavy metals like cadmium and lead, facilitating the restoration of contaminated soils. Despite these benefits, challenges remain, including the need for clear regulatory frameworks and further research on the long-term ecological impacts of nanomaterials. This review highlights the critical role of nano and microstructured systems in advancing agricultural sustainability. By bridging technological innovation with practical applications, these systems have the potential to transform global farming, making it more efficient, resilient, and environmentally sustainable.


  • Open Access

    Development of Filter Composites Based on Eucalyptus Cellulosic Nanofibers, Sugarcane Bagasse Fibers and Soybean Hulls Applied in Biodiesel Purification

    by Flávia Naves Ferreira Do Prado, Michelle Garcia Gomes, Marcela Piassi Bernardo, Daniel Pasquini, Anízio Márcio de Faria, Luís Carlos de Morais

    Alternative methods for biodiesel purification that focus on ease of operation, cost reduction, and elimination of contaminated residues or that are easier to treat have received more attention. The dry wash route was used as an alternative to the wet route in biodiesel production. Filter membranes were developed based on cellulose nanofibers as the matrix and sugarcane bagasse fibers or soy hulls, as reinforcement to the matrix, before and after two chemical treatments (carboxymethylation and regeneration with sulfuric acid). The filters were characterized by permeability capacity, morphology, wettability, porosity, SEM and mechanical properties. The filtered biodiesel was also completely characterized. One of the major impacts of dry purification of biodiesel was the glycerin content after filtration. The filters CNFBR 20–28, CNFSR 5–28, CNFSR 5–35, and CNFBC 5–28 produced purified biodiesel with glycerin content below 0.02% (200 mg/L). Another relevant fact is related to the best results for acidity index, combined alkalinity, and glycerin content, obtained by the regenerated filter CNFBR 20–28, which presented a considerable permeate flow rate value above 4145 L h−1 m−2, which can be related to compacted lamellar layers observed by SEM. The produced filters were applied to biodiesel purification using a low-pressure filtration system and a simple vacuum pump, which resulted in an appreciable reduction in cost. The produced filter with sugarcane bagasse fiber carboxymethylated at 28 mesh of granulometry was efficient for biodiesel purification, including the efficient removal of free glycerin, in agreement with the standards defined by the national controlling agencies.


  • Production of carboxymethylated lignin and its potential use in electrochemistry

    by Gabriela Ciribelli S. Pompêu, Reinaldo Ruggiero, Luis Carlos de Morais, Daniel Pasquini


  • Open Access

    Development of Agrowaste and Cellulose-based Composite Filters and Their Application in Fast Removal of Metallic Cations from Water

    by Pedro Eduardo Costa, Altamiro Xavier De Souza, Gabriel Badagnani De Carvalho, Daniel Pasquini, Marcelo Firmino de Oliveira, Anízio Marcio de Faria, Cláudio Roberto Neri, Luis Carlos De Morais

    Low-cost lignocellulosic filters were made from soybean hulls (SH), sugarcane bagasse fibers (SBF), cellulose nanofibers (CNF), and Kraft-bleached pulp (BP) as renewable feedstocks and applied in Cu (II) and Cd (II) removal from aqueous medium. Filtration was performed with a vacuum pump; filtration times ranged from 3 to 1200 seconds. For the same filter, the best permeate flow was 13,333 L.h.m-2 for both cations. The best Cd (II) removal (77.2 %) was achieved within 7 seconds at a permeate flow of 5,714 L.h.m-2. The same filter was also the best at removing Cu (II) (46.5 %), which was achieved within 7 seconds at a permeate flow of 5,714 L.h.m-2, as well. This short time evidenced that a long contact time is not needed to achieve higher removal. The best filter was made of BP, CNF, and SH. The presence of SBF and SH increased the contact angle and decreased the solid free energy surface. By FTIR-ATR it was possible to verify with which groups present in the chemical structures of the filter components the Cd (II) and Cu (II) cations interacted best. These results demonstrate the potential use of lignocellulosic biomass for producing composites aimed at water decontamination.

  • Potential Applications of Lignin

    by Luís Carlos de Morais, Gabriel Badagnani de Carvalho


  • Open Access

    Preparação e caracterização de complexos polieletrolíticos a partir de polímeros de fontes renováveis

    by Marciele Gomes Rodrigues, Luís Carlos De Morais, Daniel Pasquini

    O interesse na utilização de polímeros renováveis é crescente por serem materiais biodegradáveis e recicláveis, tornando-os materiais ideais para aplicações em diversas áreas. Portanto, o objetivo desta pesquisa foi obter complexos de polieletrólitos e esferas através da associação de polímeros de cargas opostas, visando aplicações industriais, por meio de um método simples de mistura. O contato entre as soluções catiônicas e aniônicas, resultou em interações bem-sucedidas de quitosana com a carboximetil lignina e lignosulfonato de sódio. Já as esferas foram obtidas com sucesso por meio da interação entre os polímeros de quitosana e lignosulfonato de sódio, e apresentaram entre 3 e 5 mm. A microscopia eletrônica de varredura e a espectroscopia de raios-X por energia dispersiva, confirmaram propriedades como porosidade na superfície e parte interna das esferas e o teor em massa dos elementos, respectivamente. Em suma, a pesquisa demonstrou a viabilidade de obter complexos de polieletrólitos e esferas a partir de uma abordagem de baixo custo comercial.

  • Potential Applications of Lignin

    by Luís Carlos de Morais, Gabriel Badagnani de Carvalho