AHAmparo Herrera

Amparo Herrera

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Amparo Herrera has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Oscillators Based on Step-Impedance and Slow Wave Transmission Lines for Sensing Applications

    by Mabel Ponton, Sergio Sancho, Amparo Herrera, Almudena Suarez

    This work investigates the capabilities of oscillators based on step-impedance and slow wave structures to sense dielectric constants. The material under test (MUT) is placed over the structure and the objective is to achieve a high sensitivity of the oscillation frequency with the advantage of low phase noise, enabled by the high quality factor of the structure. With the aid of simplified analytical models, we will initially study the variation of the resonance frequency of a istep-impedance transmission line with the dielectric constant of the MUT, paying attention to the influence of the number of line sections. The study includes the derivation of analytical expressions for the sensitivity of the resonance frequency. Next, the structure will be connected to the oscillator active core, which will be modeled with a numerical nonlinear admittance function extracted from harmonic-balance (HB) simulations. The resulting semianalytical formulation will provide insight into the variation of the oscillation frequency and amplitude with the dielectric constant of the MUT, as well as the variation of the phase-noise spectral density. It will also enable a versatile test and optimization of the various structures to achieve high sensitivity with low phase noise. The methods have been successfully applied to an field-effect transistor (FET)-based oscillator at about 2 GHz.


  • Wireless Injection Locking of Zero-IF Self-Oscillating Mixers

    by Mabel Ponton, Sergio Sancho, Amparo Herrera, Almudena Suarez

    The recently introduced Zero-IF self-oscillating mixers (SOMs) enable a direct frequency conversion, of interest for the implementation of compact and low consumption radio frequency identification (RFID) tags, among other applications. In previous works, the Zero-IF SOM is placed in only one of the terminals of the wireless link, the other one being based on a conventional scheme. In this article, a system made up of two wirelessly locked Zero-IF SOMs, operating as a frequency upconverter and downconverter, will be analyzed to evaluate its potential for low-cost short-range communications. A complete formulation describing the system under antenna and propagation effects will be presented, which, as a particular case, is able to predict the behavior of the previously proposed Zero-IF SOM, locked by an independent signal. The formulation based on oscillator models extracted from harmonic balance allows deriving design criteria for an optimum and robust performance and can predict the maximum communication range, as well as the stability properties and phase-noise behavior. The operation under modulated conditions is analyzed with a novel envelope-transient formulation, accounting for the time differentiation caused by the propagation effects. The methods have been applied to a system of two Zero-IF SOMs operating at 900 MHz.


  • Open Access

    Analysis of noise and dynamical effects in zero-IF self-oscillating mixers

    by M. Ponton, S. Sancho, A. Herrera, A. Suarez

    Zero-IF self-oscillating mixers (SOMs), based on injection locking, enable a compact direct frequency conversion and substantially mitigate the phase noise problem of heterodyne SOMs. Despite these advantages, their operation is complex and susceptible to exhibit a variety of dynamical effects. Here the need for an optimum selection of the operation point in the static injection-locked curve is demonstrated, as well as the inability of the oscillator to follow the variations of the input signal from a certain modulation frequency. Then a noise analysis of the downconverted signal is presented, based on a conversion-matrix formalism applied to a semi-analytical formulation.


  • Open Access

    Combined US and UWB-RF imaging of concrete structures for identification and location of embedded materials

    by J.L. Blanco-Murillo, D. Lluveras, V. Yagüe Jiménez, J.J. Anaya, F.J. Casajús-Quirós, M.A.G. Izquierdo, J.M. Menéndez, M.G. Hernández, A. Herrera

  • Improving Yield on RF-CMOS ICs

    by Amparo Herrera, Yolanda Jato

    One of the industry sectors with the largest revenue in the telecommunication field is the wireless communications field. Wireless operators try to offer products that fulfill the user demands in terms of price, battery life and product quality. All these requirements must be also fulfilled by the designer of the MMIC (Microwave Monolithic Integrated Circuits) circuits that will be used in those wireless terminals, achieving a reliable design, with high performance, low cost and if possible in one or two foundry iterations so as to bring the product out to the market as soon as possible. Silicon based technologies are the lowest cost ones. These technologies don't include some essential components for the design of RF circuits, which leads to measurement results quite different from those simulated. The deep study of the problems presented when designing Si based RF circuits recommends the use of electromagnetic simulation or coo-simulation tools. The paper shows different simulation techniques that help the designer to obtain better designs with a lower cost, as well as reduced foundry iterations.

  • CMOS VCO design optimization using reliable 3D electromagnetic inductor models

    by Laura Diego, Yolanda Jato, Carmen Perez, Amparo Herrera

    Lack of reliable inductor models at high frequencies in SiGe makes the design of certain microwave circuits a tiresome task. This paper presents the design process of a fully integrated 11.6 GHz BiCMOS VCO with a good compromise between phase noise, power consumption and area. Inductors are essential components in the VCO design and therefore must be carefully modeled. We propose the use of a three dimensional electromagnetic field simulator to characterize the silicon integrated planar inductor within the VCO. Simulation and measurement results demonstrate how the use of an accurate inductor model can significantly reduce the designing steps leading to a first time working silicon.

  • First run S-DMB MMIC low noise amplifier

    by Yolanda Jato, Carmen Perez, Amparo Herrera, Laura Diego

    This paper reports on the simulation steps needed to design a GaAs MMIC LNA for S-DMB on-board satellite applications in only one fabrication iteration, which achieves a noise figure <; 1.3 dB and gain> 28 dB for applications from 1.95 to 2.3 GHz. In addition, the amplifier obtains a high linearity with an OIP3 of 20.7 dBm and PldB of 6 dBm over a 1.95-2.3 GHz bandwidth. Availability of accurate library simulation models and the use of ADS co-simulation scheme permit us reducing design time and more importantly obtaining a first run working chip.

  • Complete Stability Analysis of Multifunction MMIC Circuits

    by César Barquinero, Almudena Suarez, Amparo Herrera, José Luis Garcia

    This paper describes a systematic methodology for complete stability analysis of nonlinear microwave multifunction circuits. The proposed strategy has two different stages: the stability analysis of a nominal steady-state solution and the use of continuation techniques to efficiently determine the unstable operation ranges. The stability analysis is demanding due to the multiple loops contained in the large multifunction circuit. The first step is to check the possible fulfillment of the oscillation startup conditions at different circuit nodes followed by pole-zero identification. Given the complexity of the circuit topology, a systematic technique is necessary for the selection of the observation nodes. This has been applied at both the lumped-element schematic and the layout levels. These stability analyses have been carried out at small-signal (linear) and large-signal (nonlinear) since the multifunction circuit includes a nonlinear mixer. In the case of instability, the origin of the oscillation and its characteristics are analyzed versus the critical circuit parameters through the application of continuation techniques to the steady-state oscillatory solution. Moreover, sensitivity yield analysis and variations of environmental conditions combined with the stability techniques have also been taken into account and integrated into the design cycle. The proposed systematic approach has been successfully applied to determine and correct an oscillation of a multifunction monolithic-microwave integrated-circuit converter. It has also been proven in other multifunction circuits in the same way.


  • ESD structures impact analysis on a WLAN 802.11a LNA

    by Yolanda Jato, Amparo Herrera

    This paper presents a MMIC ESD protected low-noise amplifier manufactured in SiGe:C BiCMOS technology for the IEEE 802.11a/HiperLAN WLAN standard. The LNA operates at 5.2 GHz and achieves a measured gain of 22 dB, a noise figure of 3.3 dB and an output 1 dB compression point of -3 dBm. The amplifier also shows wideband input and output matching The ESD protection circuit has been modeled and the results have been used to study its impact in the performance of the amplifier. The LNA was mounted and measured to test the similarity with simulations.

  • An extension of the lumped-network FDTD method to linear two-port lumped circuits

    by O. Gonzalez, J.A. Pereda, A. Herrera, A. Vegas

    The lumped-network finite-difference time-domain (LN-FDTD) technique is an extension of the conventional finite-difference time-domain (FDTD) method that allows the systematic incorporation of linear one-port lumped networks (LNs) into a single FDTD cell. This paper presents an extension of the LN-FDTD technique, which allows linear two-port (TP)-LNs to be incorporated into the FDTD framework. The method basically consists of describing a TP-LN by means of its admittance matrix in the Laplace domain. By applying the Mobius transformation technique, we then obtain the admittance matrix of the TP-LN in the Z-transform domain. Finally, appropriate digital signal-processing methodologies are used to derive a set of difference equations that models the TP-LN behavior in the discrete-time domain. These equations are solved in combination with the Maxwell-Ampere's equation. To show the validity of the TP-LN-FDTD technique introduced here, we have considered the equivalent circuit of a chip capacitor and a linear circuit model of a generic metal-semiconductor field-effect transistor. These LNs have been placed on a microstrip gap and the scattering parameters of the resulting hybrid circuit have been computed. The results are compared with those obtained by using the electromagnetic simulator Agilent HFSS in combination with the circuital simulator ADS, and with those calculated by ADS alone. For the chip capacitor, experimental measurements have also been carried out. The agreement among all the simulated results is good. Generally speaking, the measured results agree with the simulated ones. The differences observed are mainly due to the influence of the subminiature A connectors and some mismatching at the ports.