Jan Clausmeyer
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jan Clausmeyer has a total of 101 co-authors. Here are the top co-authors by number of shared publications:
- Wolfgang Schuhmann
Analytical Chemistry‐Center for Electrochemical Sciences (CES) Faculty of Chemistry and Biochemistry Ruhr University Bochum Bochum Germany
20 shared publications - Alexander Botz
Analytical Chemistry – Center for Electrochemical Sciences Faculty of Chemistry and Biochemistry Ruhr University Bochum Universitätsstr. 150 44780 Bochum Germany
6 shared publications - Denis Öhl
Analytical Chemistry - Center for Electrochemical Sciences (CES), Ruhr-Universität Bochum, Universitätsstrasse 150, D-44780, Bochum, Germany.
6 shared publications Ainara López Córdoba
Department of Medicine Imperial College London London W12 0NN UK
4 shared publications- Kristina Tschulik
Ruhr University Bochum
4 shared publications - Nicolas Plumeré
Technical University of Munich
3 shared publications
Latest Publications
- Open Access
- 2 November 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (44) , 47773-47784
Embracing Phase Transitions to Rationalize the High Oxygen Evolution Reaction Activity of Nickel Selenides in Alkaline Electrolytes
The transformation of electrodeposited NiSe nanocatalysts was studied under oxygen evolution reaction (OER) conditions in alkaline electrolytes by a combination of operando X-ray absorption (XAS) and operando electrochemical impedance spectroscopy (EIS). The upper layers of nickel selenides transform into nickel oxide/oxyhydroxide species, which exhibit higher catalytic OER activity than the as-synthesized nickel oxide/oxyhydroxide, as reported previously. The coupled operando XAS and EIS experiments reveal that the Ni3+/Ni4+ transition occurs at lower potentials than the OER, involving a transient phase transformation at the foot of the nickel oxidation peak. Based on these findings and using insights from complementary operando (Raman spectroscopy, scanning flow cell inductively coupled plasma mass spectrometry) and ex situ measurements (XAS and X-ray photoelectron spectroscopy), a catalytic cycle is proposed within the framework of frustrated phase transitions linking the molecular transformation of substrate and products (H2O/O2) to structural and electronic changes of the solid catalyst (β-Ni(OH)2/β-NiOOH). Specifically, the Ni–O distance of the formed β-NiOOH surface species on top of the NiSe layers elongates, facilitating rapid local transitions between different catalyst phases and oxidation states, which are essential for rapid completion of the catalytic cycle under operando conditions.
- 2 November 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (44) , 47773-47784
Open AccessEmbracing Phase Transitions to Rationalize the High Oxygen Evolution Reaction Activity of Nickel Selenides in Alkaline Electrolytes
The transformation of electrodeposited NiSe nanocatalysts was studied under oxygen evolution reaction (OER) conditions in alkaline electrolytes by a combination of operando X-ray absorption (XAS) and operando electrochemical impedance spectroscopy (EIS). The upper layers of nickel selenides transform into nickel oxide/oxyhydroxide species, which exhibit higher catalytic OER activity than the as-synthesized nickel oxide/oxyhydroxide, as reported previously. The coupled operando XAS and EIS experiments reveal that the Ni3+/Ni4+ transition occurs at lower potentials than the OER, involving a transient phase transformation at the foot of the nickel oxidation peak. Based on these findings and using insights from complementary operando (Raman spectroscopy, scanning flow cell inductively coupled plasma mass spectrometry) and ex situ measurements (XAS and X-ray photoelectron spectroscopy), a catalytic cycle is proposed within the framework of frustrated phase transitions linking the molecular transformation of substrate and products (H2O/O2) to structural and electronic changes of the solid catalyst (β-Ni(OH)2/β-NiOOH). Specifically, the Ni–O distance of the formed β-NiOOH surface species on top of the NiSe layers elongates, facilitating rapid local transitions between different catalyst phases and oxidation states, which are essential for rapid completion of the catalytic cycle under operando conditions.
- Open Access
- 13 April 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (15) , 21964-21977
Multiscale Analysis of Electrochemical Dealloying of Bimetallic Nanoparticles to Tune Catalytic Activity
Electrochemical dealloying is a promising technique to tune the activity and material utilization of electrocatalysts. Studying this process in bimetallic nanoparticles remains challenging since their synthesis yields ensembles with varied properties. To understand the dealloying behavior of individual nanoparticles, we present a combined characterization method that provides statistical distributions in composition, morphology, and catalytic activity. AgxAuy alloy nanoparticles synthesized via reverse micelles were dealloyed, by potential cycling, to tune their activity for the hydrogen evolution reaction. In a multiscale approach, we performed macroscale measurements on a glassy carbon electrode and scanning electrochemical cell microscopy (SECCM) on small groups of particles/aggregates within the confines of the scanned droplet. The SECCM pipet was used to create different states of dealloying within a single sample, followed by higher-resolution SECCM activity mapping. The faster mass transport in the SECCM tip, compared to the macroelectrode configuration, led to accelerated Ag dissolution from the AgxAuy nanoparticles. While the particles showed the highest activity and largest Ag content decrease after only 0.5 cycles, heterogeneous behavior was still evident among individual particle groups. Further, using a boron-doped diamond electrode, identical-location scanning transmission electron microscopy and energy-dispersive X-ray spectroscopy studies allowed Ag leaching and particle shrinking to be followed at the single-particle level, as a function of cycle number, for a statistically relevant sample number (n > 70). Increased cycling induced particle deactivation, shrinking, and coalescence. Overall, our results showcase an efficient and versatile route to combine systematic tuning and high-throughput screening of nanocatalyst property–activity relationships.
- 13 April 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (15) , 21964-21977
Open AccessMultiscale Analysis of Electrochemical Dealloying of Bimetallic Nanoparticles to Tune Catalytic Activity
Electrochemical dealloying is a promising technique to tune the activity and material utilization of electrocatalysts. Studying this process in bimetallic nanoparticles remains challenging since their synthesis yields ensembles with varied properties. To understand the dealloying behavior of individual nanoparticles, we present a combined characterization method that provides statistical distributions in composition, morphology, and catalytic activity. AgxAuy alloy nanoparticles synthesized via reverse micelles were dealloyed, by potential cycling, to tune their activity for the hydrogen evolution reaction. In a multiscale approach, we performed macroscale measurements on a glassy carbon electrode and scanning electrochemical cell microscopy (SECCM) on small groups of particles/aggregates within the confines of the scanned droplet. The SECCM pipet was used to create different states of dealloying within a single sample, followed by higher-resolution SECCM activity mapping. The faster mass transport in the SECCM tip, compared to the macroelectrode configuration, led to accelerated Ag dissolution from the AgxAuy nanoparticles. While the particles showed the highest activity and largest Ag content decrease after only 0.5 cycles, heterogeneous behavior was still evident among individual particle groups. Further, using a boron-doped diamond electrode, identical-location scanning transmission electron microscopy and energy-dispersive X-ray spectroscopy studies allowed Ag leaching and particle shrinking to be followed at the single-particle level, as a function of cycle number, for a statistically relevant sample number (n > 70). Increased cycling induced particle deactivation, shrinking, and coalescence. Overall, our results showcase an efficient and versatile route to combine systematic tuning and high-throughput screening of nanocatalyst property–activity relationships.
- Open Access
- 29 January 2025
- Published by Elsevier in Electrochimica Acta
- Vol. 518
Does Pb underpotential deposition rearrange surface-near atoms in AgAu films and nanoparticles?
- 29 January 2025
- Published by Elsevier in Electrochimica Acta
- Vol. 518
Open AccessDoes Pb underpotential deposition rearrange surface-near atoms in AgAu films and nanoparticles?
- 5 June 2019
- Published by Wiley in ChemElectroChem
- Vol. 6 (12) , 3108-3112
Enhancing the Selectivity between Oxygen and Chlorine towards Chlorine during the Anodic Chlorine Evolution Reaction on a Dimensionally Stable Anode
The selectivity of the chlorine evolution reaction over the oxygen evolution reaction during the electrolysis of aqueous NaCl is, despite being very high, still insufficient to prevent expensive separation of the formed Cl2 and O2 by means of liquefaction. We hypothesize that, by decreasing the local activity of H2O near the anode surface by substantially increasing the ionic strength of the electrolyte, the oxygen evolution reaction would be suppressed, leading concomitantly to a higher selectivity of Cl2 over O2 formation. Hence, the influence of the ionic strength on the competition between electrochemical evolution of O2 and Cl2 at dimensionally stable anodes (DSAs) was investigated. Addition of a high concentration of NaNO3, an inert electrolyte additive, increases the selectivity for chlorine at high current density, as determined by means of online electrochemical mass spectrometry and UV‐vis spectroscopy. We propose conditions in which free water is suppressed, owing to under‐coordination of the solvation shells of ions, as a general concept to modulate the selectivity of competing electrochemical reactions.
- 5 June 2019
- Published by Wiley in ChemElectroChem
- Vol. 6 (12) , 3108-3112
Enhancing the Selectivity between Oxygen and Chlorine towards Chlorine during the Anodic Chlorine Evolution Reaction on a Dimensionally Stable Anode
The selectivity of the chlorine evolution reaction over the oxygen evolution reaction during the electrolysis of aqueous NaCl is, despite being very high, still insufficient to prevent expensive separation of the formed Cl2 and O2 by means of liquefaction. We hypothesize that, by decreasing the local activity of H2O near the anode surface by substantially increasing the ionic strength of the electrolyte, the oxygen evolution reaction would be suppressed, leading concomitantly to a higher selectivity of Cl2 over O2 formation. Hence, the influence of the ionic strength on the competition between electrochemical evolution of O2 and Cl2 at dimensionally stable anodes (DSAs) was investigated. Addition of a high concentration of NaNO3, an inert electrolyte additive, increases the selectivity for chlorine at high current density, as determined by means of online electrochemical mass spectrometry and UV‐vis spectroscopy. We propose conditions in which free water is suppressed, owing to under‐coordination of the solvation shells of ions, as a general concept to modulate the selectivity of competing electrochemical reactions.
- 28 August 2018
- Published by Wiley in Angewandte Chemie
- Vol. 130 (38) , 12465-12469
Die lokalen Aktivitäten von Hydroxidionen und Wasser bestimmen die Funktionsweise von auf Silber basierenden Sauerstoffverzehrkathoden
Lokale Änderungen der Ionenaktivitäten an der Oberfläche einer arbeitenden Sauerstoffverzehrkathode (SVK) wurden mittels elektrochemischer Rastermikroskopie gemessen. Während die SVK OH−‐Ionen unter Konsum von H2O durch elektrokatalytische Reduktion von O2 produziert, werden die Änderungen in den Ionenaktivitäten über eine positionierte Pt‐Mikroelektrode bestimmt. Die Empfindlichkeit der Platinelektrode wird durch die pH‐abhängige Reduktion von PtO gewährleistet. Dadurch kann auf eine vorherige Modifikation der Elektrode verzichtet werden. Diese Technik ermöglicht es, Änderungen der Koordination von H2O und OH−‐Ionen darzustellen sowie die lokale katalytische Aktivität zu evaluieren. Damit wird gezeigt, dass die elektrochemische Reaktion an sehr aktiven Katalysatoren einen starken Einfluss auf die Reaktionsumgebung haben kann.
- 28 August 2018
- Published by Wiley in Angewandte Chemie
- Vol. 130 (38) , 12465-12469
Die lokalen Aktivitäten von Hydroxidionen und Wasser bestimmen die Funktionsweise von auf Silber basierenden Sauerstoffverzehrkathoden
Lokale Änderungen der Ionenaktivitäten an der Oberfläche einer arbeitenden Sauerstoffverzehrkathode (SVK) wurden mittels elektrochemischer Rastermikroskopie gemessen. Während die SVK OH−‐Ionen unter Konsum von H2O durch elektrokatalytische Reduktion von O2 produziert, werden die Änderungen in den Ionenaktivitäten über eine positionierte Pt‐Mikroelektrode bestimmt. Die Empfindlichkeit der Platinelektrode wird durch die pH‐abhängige Reduktion von PtO gewährleistet. Dadurch kann auf eine vorherige Modifikation der Elektrode verzichtet werden. Diese Technik ermöglicht es, Änderungen der Koordination von H2O und OH−‐Ionen darzustellen sowie die lokale katalytische Aktivität zu evaluieren. Damit wird gezeigt, dass die elektrochemische Reaktion an sehr aktiven Katalysatoren einen starken Einfluss auf die Reaktionsumgebung haben kann.
- 28 August 2018
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 57 (38) , 12285-12289
Local Activities of Hydroxide and Water Determine the Operation of Silver‐Based Oxygen Depolarized Cathodes
Local ion activity changes in close proximity to the surface of an oxygen depolarized cathode (ODC) were measured by scanning electrochemical microscopy (SECM). While the operating ODC produces OH− ions and consumes O2 and H2O through the electrocatalytic oxygen reduction reaction (ORR), local changes in the activity of OH− ions and H2O are detected by means of a positioned Pt microelectrode serving as an SECM tip. Sensing at the Pt tip is based on the pH‐dependent reduction of PtO and obviates the need for prior electrode modification steps. It can be used to evaluate the coordination numbers of OH− ions and H2O, and the method was exploited as a novel approach of catalyst activity assessment. We show that the electrochemical reaction on highly active catalysts can have a drastic influence on the reaction environment.
- 28 August 2018
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 57 (38) , 12285-12289
Local Activities of Hydroxide and Water Determine the Operation of Silver‐Based Oxygen Depolarized Cathodes
Local ion activity changes in close proximity to the surface of an oxygen depolarized cathode (ODC) were measured by scanning electrochemical microscopy (SECM). While the operating ODC produces OH− ions and consumes O2 and H2O through the electrocatalytic oxygen reduction reaction (ORR), local changes in the activity of OH− ions and H2O are detected by means of a positioned Pt microelectrode serving as an SECM tip. Sensing at the Pt tip is based on the pH‐dependent reduction of PtO and obviates the need for prior electrode modification steps. It can be used to evaluate the coordination numbers of OH− ions and H2O, and the method was exploited as a novel approach of catalyst activity assessment. We show that the electrochemical reaction on highly active catalysts can have a drastic influence on the reaction environment.
- 17 April 2018
- Published by Wiley in Chempluschem
- Vol. 83 (5) , 414-417
Local Surface Modifications Investigated by Combining Scanning Electrochemical Microscopy and Surface‐Enhanced Raman Scattering
Scanning electrochemical microscopy (SECM) is coupled with surface‐enhanced Raman scattering (SERS) microscopy to characterize local surface modifications. SECM is utilized for the surface patterning of para‐nitrothiophenol self‐assembled monolayers (SAMs) in the direct mode of SECM with a subsequent readout of the chemical patterns by means of combined SECM‐SERS. The SECM‐SERS combination allows monitoring of local electrochemical processes and provides simultaneous complementary spectroscopic information. The reaction products upon SAM reduction, specifically p‐aminothiophenol groups, are distinguished from the pristine SAM and locally ruptured areas.
- 17 April 2018
- Published by Wiley in Chempluschem
- Vol. 83 (5) , 414-417
Local Surface Modifications Investigated by Combining Scanning Electrochemical Microscopy and Surface‐Enhanced Raman Scattering
Scanning electrochemical microscopy (SECM) is coupled with surface‐enhanced Raman scattering (SERS) microscopy to characterize local surface modifications. SECM is utilized for the surface patterning of para‐nitrothiophenol self‐assembled monolayers (SAMs) in the direct mode of SECM with a subsequent readout of the chemical patterns by means of combined SECM‐SERS. The SECM‐SERS combination allows monitoring of local electrochemical processes and provides simultaneous complementary spectroscopic information. The reaction products upon SAM reduction, specifically p‐aminothiophenol groups, are distinguished from the pristine SAM and locally ruptured areas.
- 5 March 2018
- Published by Wiley in ChemElectroChem
- Vol. 5 (14) , 1886-1890
Oxygen Reduction Activity and Reversible Deactivation of Single Silver Nanoparticles during Particle Adsorption Events
The activity towards the oxygen reduction reaction (ORR) of single silver nanoparticles (AgNP) was quantified by using AgNP impacts on dual‐bore carbon nanoelectrodes in highly alkaline media. We found suitable conditions for the particles to adhere sufficiently stably for detailed electrochemical characterization of a single particle. The special electrode design opens the possibility to dose gaseous oxygen to the nanoparticle under study. Deactivation of the catalytic activity of the AgNP upon excessive exposure to oxygen as well as the recovery of catalytic activity under reducing conditions is presumably attributed to hydrogen evolution at the applied low potentials. The proposed approach allows mechanistic parameters for the ORR to be extracted at a single AgNP in highly alkaline media in the absence of any binder materials and under exclusion of averaging ensemble effects.
- 5 March 2018
- Published by Wiley in ChemElectroChem
- Vol. 5 (14) , 1886-1890
Oxygen Reduction Activity and Reversible Deactivation of Single Silver Nanoparticles during Particle Adsorption Events
The activity towards the oxygen reduction reaction (ORR) of single silver nanoparticles (AgNP) was quantified by using AgNP impacts on dual‐bore carbon nanoelectrodes in highly alkaline media. We found suitable conditions for the particles to adhere sufficiently stably for detailed electrochemical characterization of a single particle. The special electrode design opens the possibility to dose gaseous oxygen to the nanoparticle under study. Deactivation of the catalytic activity of the AgNP upon excessive exposure to oxygen as well as the recovery of catalytic activity under reducing conditions is presumably attributed to hydrogen evolution at the applied low potentials. The proposed approach allows mechanistic parameters for the ORR to be extracted at a single AgNP in highly alkaline media in the absence of any binder materials and under exclusion of averaging ensemble effects.
- 1 December 2016
- Published by Elsevier in Electrochemistry Communications
- Vol. 73, 67-70
Detection of individual nanoparticle impacts using etched carbon nanoelectrodes
- 1 December 2016
- Published by Elsevier in Electrochemistry Communications
- Vol. 73, 67-70
Detection of individual nanoparticle impacts using etched carbon nanoelectrodes
- 12 August 2016
- Published by Wiley in ChemElectroChem
- Vol. 3 (12) , 2125-2129
Intracellular Hydrogen Peroxide Detection with Functionalised Nanoelectrodes
Hydrogen peroxide (H2O2) is one of the most important reactive oxygen species, and it is involved in a number of cellular processes ranging from signal transduction to immune defence and oxidative stress. It is of great interest to intracellularly quantify H2O2 to improve the understanding of its role in disease processes. In this study, we present an amperometric nanosensor for the quantification of H2O2 at the single‐cell level. Deposition of the electrocatalyst Prussian Blue on carbon nanoelectrodes enables selective H2O2 reduction at mild potentials. Owing to their small size and needle‐type shape, these nanoelectrodes can penetrate the membrane of single living cells, causing only minimal perturbation. The nanosensors allow for the monitoring of penetration‐induced oxidative outbursts as well as the uptake of H2O2 from the extracellular environment in single murine macrophages.
- 12 August 2016
- Published by Wiley in ChemElectroChem
- Vol. 3 (12) , 2125-2129
Intracellular Hydrogen Peroxide Detection with Functionalised Nanoelectrodes
Hydrogen peroxide (H2O2) is one of the most important reactive oxygen species, and it is involved in a number of cellular processes ranging from signal transduction to immune defence and oxidative stress. It is of great interest to intracellularly quantify H2O2 to improve the understanding of its role in disease processes. In this study, we present an amperometric nanosensor for the quantification of H2O2 at the single‐cell level. Deposition of the electrocatalyst Prussian Blue on carbon nanoelectrodes enables selective H2O2 reduction at mild potentials. Owing to their small size and needle‐type shape, these nanoelectrodes can penetrate the membrane of single living cells, causing only minimal perturbation. The nanosensors allow for the monitoring of penetration‐induced oxidative outbursts as well as the uptake of H2O2 from the extracellular environment in single murine macrophages.