Denis Öhl
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Denis Öhl has a total of 38 co-authors. Here are the top co-authors by number of shared publications:
- Wolfgang Schuhmann
Analytical Chemistry‐Center for Electrochemical Sciences (CES) Faculty of Chemistry and Biochemistry Ruhr University Bochum Bochum Germany
10 shared publications - Jan Clausmeyer
Analytical Chemistry - Center for Electrochemical Sciences (CES), Ruhr-Universität Bochum, Universitätsstrasse 150, D-44780, Bochum, Germany.
6 shared publications - Alexander Botz
Analytical Chemistry – Center for Electrochemical Sciences Faculty of Chemistry and Biochemistry Ruhr University Bochum Universitätsstr. 150 44780 Bochum Germany
5 shared publications - Tsvetan Tarnev
Analytical Chemistry - Center for Electrochemical Sciences (CES), Faculty of Chemistry and Biochemistry, Ruhr-Universität Bochum, D-44780 Bochum, Germany
3 shared publications David Franzen
Institut für Chemische und Elektrochemische Verfahrenstechnik Technische Universität Clausthal Leibnizstraße 17 38678 Clausthal-Zellerfeld Deutschland
2 shared publications- Justus Masa
Max Planck Institute for Chemical Energy Conversion Stiftstraße 34–36 45470 Mülheim an der Ruhr Germany
2 shared publications
Latest Publications
- Open Access
- 26 October 2022
- Published by Wiley in Advanced Materials Interfaces
- Vol. 9 (35)
Unveiling Ruthenium(II) Diazadienyls for Gas Phase Deposition Processes: Low Resistivity Ru Thin Films and Their Performance in the Acidic Oxygen Evolution Reaction
Two novel ruthenium complexes belonging to the Ru(II)(DAD)(Cym) (DAD = diazadienyl) (Cym = cymene) compound family are introduced as promising precursors. Their chemical nature, potential for chemical vapor deposition (CVD), and possibly atomic layer deposition (ALD) are demonstrated. The development of nonoxidative CVD processes yielding high‐quality Ru thin films is realized. Chemical analyses are exercised that vitiate the deceptive assumption of Ru(DAD)(Aryl) complexes being zero‐valent through clear evidence for the redox noninnocence of the DAD ligand. Two different CVD routes for the growth of Ru films are developed using Ru(tBu2DAD)(Cym). Ru thin films from both processes are subjected to thorough and comparative analyses that allowed to deduce similarities and differences in film growth. Ru thin films with a thickness of 30–35 nm grown on SiO2 yielded close‐to‐bulk resistivity values ranging from 12 to 16 µΩ cm. Catalysis evaluation of the films in the acidic oxygen evolution reaction (OER) results in promising performances based on overpotentials as low as 240 mV with Tafel slopes of 45–50 mV dec−1. Based on the degradation observed during electrochemical measurements, the impact of OER conditions on the layers is critically assessed by complementary methods.
- 26 October 2022
- Published by Wiley in Advanced Materials Interfaces
- Vol. 9 (35)
Open AccessUnveiling Ruthenium(II) Diazadienyls for Gas Phase Deposition Processes: Low Resistivity Ru Thin Films and Their Performance in the Acidic Oxygen Evolution Reaction
Two novel ruthenium complexes belonging to the Ru(II)(DAD)(Cym) (DAD = diazadienyl) (Cym = cymene) compound family are introduced as promising precursors. Their chemical nature, potential for chemical vapor deposition (CVD), and possibly atomic layer deposition (ALD) are demonstrated. The development of nonoxidative CVD processes yielding high‐quality Ru thin films is realized. Chemical analyses are exercised that vitiate the deceptive assumption of Ru(DAD)(Aryl) complexes being zero‐valent through clear evidence for the redox noninnocence of the DAD ligand. Two different CVD routes for the growth of Ru films are developed using Ru(tBu2DAD)(Cym). Ru thin films from both processes are subjected to thorough and comparative analyses that allowed to deduce similarities and differences in film growth. Ru thin films with a thickness of 30–35 nm grown on SiO2 yielded close‐to‐bulk resistivity values ranging from 12 to 16 µΩ cm. Catalysis evaluation of the films in the acidic oxygen evolution reaction (OER) results in promising performances based on overpotentials as low as 240 mV with Tafel slopes of 45–50 mV dec−1. Based on the degradation observed during electrochemical measurements, the impact of OER conditions on the layers is critically assessed by complementary methods.
- Open Access
- 2 February 2022
- Published by Wiley in Chemistry – A European Journal
- Vol. 28 (12) , e202104249
Redox Replacement of Silver on MOF‐Derived Cu/C Nanoparticles on Gas Diffusion Electrodes for Electrocatalytic CO2 Reduction
Bimetallic tandem catalysts have emerged as a promising strategy to locally increase the CO flux during electrochemical CO2 reduction, so as to maximize the rate of conversion to C−C‐coupled products. Considering this, a novel Cu/C−Ag nanostructured catalyst has been prepared by a redox replacement process, in which the ratio of the two metals can be tuned by the replacement time. An optimum Cu/Ag composition with similarly sized particles showed the highest CO2 conversion to C2+ products compared to non‐Ag‐modified gas‐diffusion electrodes. Gas chromatography and in‐situ Raman measurements in a CO2 gas diffusion cell suggest the formation of top‐bound linear adsorbed *CO followed by consumption of CO in the successive cascade steps, as evidenced by the increasingνC−H bands. These findings suggest that two mechanisms operate simultaneously towards the production of HCO2H and C−C‐coupled products on the Cu/Ag bimetallic surface.
- 2 February 2022
- Published by Wiley in Chemistry – A European Journal
- Vol. 28 (12) , e202104249
Open AccessRedox Replacement of Silver on MOF‐Derived Cu/C Nanoparticles on Gas Diffusion Electrodes for Electrocatalytic CO2 Reduction
Bimetallic tandem catalysts have emerged as a promising strategy to locally increase the CO flux during electrochemical CO2 reduction, so as to maximize the rate of conversion to C−C‐coupled products. Considering this, a novel Cu/C−Ag nanostructured catalyst has been prepared by a redox replacement process, in which the ratio of the two metals can be tuned by the replacement time. An optimum Cu/Ag composition with similarly sized particles showed the highest CO2 conversion to C2+ products compared to non‐Ag‐modified gas‐diffusion electrodes. Gas chromatography and in‐situ Raman measurements in a CO2 gas diffusion cell suggest the formation of top‐bound linear adsorbed *CO followed by consumption of CO in the successive cascade steps, as evidenced by the increasingνC−H bands. These findings suggest that two mechanisms operate simultaneously towards the production of HCO2H and C−C‐coupled products on the Cu/Ag bimetallic surface.
- 5 June 2019
- Published by Wiley in ChemElectroChem
- Vol. 6 (12) , 3108-3112
Enhancing the Selectivity between Oxygen and Chlorine towards Chlorine during the Anodic Chlorine Evolution Reaction on a Dimensionally Stable Anode
The selectivity of the chlorine evolution reaction over the oxygen evolution reaction during the electrolysis of aqueous NaCl is, despite being very high, still insufficient to prevent expensive separation of the formed Cl2 and O2 by means of liquefaction. We hypothesize that, by decreasing the local activity of H2O near the anode surface by substantially increasing the ionic strength of the electrolyte, the oxygen evolution reaction would be suppressed, leading concomitantly to a higher selectivity of Cl2 over O2 formation. Hence, the influence of the ionic strength on the competition between electrochemical evolution of O2 and Cl2 at dimensionally stable anodes (DSAs) was investigated. Addition of a high concentration of NaNO3, an inert electrolyte additive, increases the selectivity for chlorine at high current density, as determined by means of online electrochemical mass spectrometry and UV‐vis spectroscopy. We propose conditions in which free water is suppressed, owing to under‐coordination of the solvation shells of ions, as a general concept to modulate the selectivity of competing electrochemical reactions.
- 5 June 2019
- Published by Wiley in ChemElectroChem
- Vol. 6 (12) , 3108-3112
Enhancing the Selectivity between Oxygen and Chlorine towards Chlorine during the Anodic Chlorine Evolution Reaction on a Dimensionally Stable Anode
The selectivity of the chlorine evolution reaction over the oxygen evolution reaction during the electrolysis of aqueous NaCl is, despite being very high, still insufficient to prevent expensive separation of the formed Cl2 and O2 by means of liquefaction. We hypothesize that, by decreasing the local activity of H2O near the anode surface by substantially increasing the ionic strength of the electrolyte, the oxygen evolution reaction would be suppressed, leading concomitantly to a higher selectivity of Cl2 over O2 formation. Hence, the influence of the ionic strength on the competition between electrochemical evolution of O2 and Cl2 at dimensionally stable anodes (DSAs) was investigated. Addition of a high concentration of NaNO3, an inert electrolyte additive, increases the selectivity for chlorine at high current density, as determined by means of online electrochemical mass spectrometry and UV‐vis spectroscopy. We propose conditions in which free water is suppressed, owing to under‐coordination of the solvation shells of ions, as a general concept to modulate the selectivity of competing electrochemical reactions.
- 28 August 2018
- Published by Wiley in Angewandte Chemie
- Vol. 130 (38) , 12465-12469
Die lokalen Aktivitäten von Hydroxidionen und Wasser bestimmen die Funktionsweise von auf Silber basierenden Sauerstoffverzehrkathoden
Lokale Änderungen der Ionenaktivitäten an der Oberfläche einer arbeitenden Sauerstoffverzehrkathode (SVK) wurden mittels elektrochemischer Rastermikroskopie gemessen. Während die SVK OH−‐Ionen unter Konsum von H2O durch elektrokatalytische Reduktion von O2 produziert, werden die Änderungen in den Ionenaktivitäten über eine positionierte Pt‐Mikroelektrode bestimmt. Die Empfindlichkeit der Platinelektrode wird durch die pH‐abhängige Reduktion von PtO gewährleistet. Dadurch kann auf eine vorherige Modifikation der Elektrode verzichtet werden. Diese Technik ermöglicht es, Änderungen der Koordination von H2O und OH−‐Ionen darzustellen sowie die lokale katalytische Aktivität zu evaluieren. Damit wird gezeigt, dass die elektrochemische Reaktion an sehr aktiven Katalysatoren einen starken Einfluss auf die Reaktionsumgebung haben kann.
- 28 August 2018
- Published by Wiley in Angewandte Chemie
- Vol. 130 (38) , 12465-12469
Die lokalen Aktivitäten von Hydroxidionen und Wasser bestimmen die Funktionsweise von auf Silber basierenden Sauerstoffverzehrkathoden
Lokale Änderungen der Ionenaktivitäten an der Oberfläche einer arbeitenden Sauerstoffverzehrkathode (SVK) wurden mittels elektrochemischer Rastermikroskopie gemessen. Während die SVK OH−‐Ionen unter Konsum von H2O durch elektrokatalytische Reduktion von O2 produziert, werden die Änderungen in den Ionenaktivitäten über eine positionierte Pt‐Mikroelektrode bestimmt. Die Empfindlichkeit der Platinelektrode wird durch die pH‐abhängige Reduktion von PtO gewährleistet. Dadurch kann auf eine vorherige Modifikation der Elektrode verzichtet werden. Diese Technik ermöglicht es, Änderungen der Koordination von H2O und OH−‐Ionen darzustellen sowie die lokale katalytische Aktivität zu evaluieren. Damit wird gezeigt, dass die elektrochemische Reaktion an sehr aktiven Katalysatoren einen starken Einfluss auf die Reaktionsumgebung haben kann.
- 28 August 2018
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 57 (38) , 12285-12289
Local Activities of Hydroxide and Water Determine the Operation of Silver‐Based Oxygen Depolarized Cathodes
Local ion activity changes in close proximity to the surface of an oxygen depolarized cathode (ODC) were measured by scanning electrochemical microscopy (SECM). While the operating ODC produces OH− ions and consumes O2 and H2O through the electrocatalytic oxygen reduction reaction (ORR), local changes in the activity of OH− ions and H2O are detected by means of a positioned Pt microelectrode serving as an SECM tip. Sensing at the Pt tip is based on the pH‐dependent reduction of PtO and obviates the need for prior electrode modification steps. It can be used to evaluate the coordination numbers of OH− ions and H2O, and the method was exploited as a novel approach of catalyst activity assessment. We show that the electrochemical reaction on highly active catalysts can have a drastic influence on the reaction environment.
- 28 August 2018
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 57 (38) , 12285-12289
Local Activities of Hydroxide and Water Determine the Operation of Silver‐Based Oxygen Depolarized Cathodes
Local ion activity changes in close proximity to the surface of an oxygen depolarized cathode (ODC) were measured by scanning electrochemical microscopy (SECM). While the operating ODC produces OH− ions and consumes O2 and H2O through the electrocatalytic oxygen reduction reaction (ORR), local changes in the activity of OH− ions and H2O are detected by means of a positioned Pt microelectrode serving as an SECM tip. Sensing at the Pt tip is based on the pH‐dependent reduction of PtO and obviates the need for prior electrode modification steps. It can be used to evaluate the coordination numbers of OH− ions and H2O, and the method was exploited as a novel approach of catalyst activity assessment. We show that the electrochemical reaction on highly active catalysts can have a drastic influence on the reaction environment.
- 5 March 2018
- Published by Wiley in ChemElectroChem
- Vol. 5 (14) , 1886-1890
Oxygen Reduction Activity and Reversible Deactivation of Single Silver Nanoparticles during Particle Adsorption Events
The activity towards the oxygen reduction reaction (ORR) of single silver nanoparticles (AgNP) was quantified by using AgNP impacts on dual‐bore carbon nanoelectrodes in highly alkaline media. We found suitable conditions for the particles to adhere sufficiently stably for detailed electrochemical characterization of a single particle. The special electrode design opens the possibility to dose gaseous oxygen to the nanoparticle under study. Deactivation of the catalytic activity of the AgNP upon excessive exposure to oxygen as well as the recovery of catalytic activity under reducing conditions is presumably attributed to hydrogen evolution at the applied low potentials. The proposed approach allows mechanistic parameters for the ORR to be extracted at a single AgNP in highly alkaline media in the absence of any binder materials and under exclusion of averaging ensemble effects.
- 5 March 2018
- Published by Wiley in ChemElectroChem
- Vol. 5 (14) , 1886-1890
Oxygen Reduction Activity and Reversible Deactivation of Single Silver Nanoparticles during Particle Adsorption Events
The activity towards the oxygen reduction reaction (ORR) of single silver nanoparticles (AgNP) was quantified by using AgNP impacts on dual‐bore carbon nanoelectrodes in highly alkaline media. We found suitable conditions for the particles to adhere sufficiently stably for detailed electrochemical characterization of a single particle. The special electrode design opens the possibility to dose gaseous oxygen to the nanoparticle under study. Deactivation of the catalytic activity of the AgNP upon excessive exposure to oxygen as well as the recovery of catalytic activity under reducing conditions is presumably attributed to hydrogen evolution at the applied low potentials. The proposed approach allows mechanistic parameters for the ORR to be extracted at a single AgNP in highly alkaline media in the absence of any binder materials and under exclusion of averaging ensemble effects.
- 20 February 2018
- Published by Royal Society of Chemistry (RSC) in Faraday Discussions
- Vol. 210, 317-332
Evaluation of the intrinsic catalytic activity of nanoparticles without prior knowledge of the mass loading
We propose a method enabling the evaluation of intrinsic catalytic activity of nanoparticles based on the diffusion-limited steady-state current.
- 20 February 2018
- Published by Royal Society of Chemistry (RSC) in Faraday Discussions
- Vol. 210, 317-332
Evaluation of the intrinsic catalytic activity of nanoparticles without prior knowledge of the mass loading
We propose a method enabling the evaluation of intrinsic catalytic activity of nanoparticles based on the diffusion-limited steady-state current.
- 18 May 2016
- Published by Royal Society of Chemistry (RSC) in Faraday Discussions
- Vol. 193, 241-250
The oxygen reduction reaction at the three-phase boundary: nanoelectrodes modified with Ag nanoclusters
Silver nanoclusters are deposited on bifunctional Θ-shaped nanoelectrodes consisting of a carbon nanoelectrode combined with a hollow nanopipette. The Θ-nanoelectrodes are used as model systems to study interfacial mass transport in gas diffusion electrodes and in particular oxygen-depolarized cathodes (ODC) for the oxygen reduction reaction (ORR) in chlor-alkali electrolysers. By local delivery of O2 gas to the electroactive Ag nanoclusters through the adjacent nanopipette, enhanced currents for the ORR at the Ag nanoparticles are recorded which are not accountable when considering the low solubility and slow diffusion of O2 in highly alkaline media. Instead, local oversaturation of O2 leads to current enhancement at the Ag nanoclusters. Due to the intrinsic high mass transport rates at the nanometric electrodes accompanied by local delivery of reactants, the method generally allows to study electrochemical reactions at single nanoparticles beyond the limitations induced by slow diffusion and low reactant concentration. Kinetic and mechanistic information, for instance derived from Tafel slopes, can be obtained from kinetic regimes not accessible to standard techniques.
- 18 May 2016
- Published by Royal Society of Chemistry (RSC) in Faraday Discussions
- Vol. 193, 241-250
The oxygen reduction reaction at the three-phase boundary: nanoelectrodes modified with Ag nanoclusters
Silver nanoclusters are deposited on bifunctional Θ-shaped nanoelectrodes consisting of a carbon nanoelectrode combined with a hollow nanopipette. The Θ-nanoelectrodes are used as model systems to study interfacial mass transport in gas diffusion electrodes and in particular oxygen-depolarized cathodes (ODC) for the oxygen reduction reaction (ORR) in chlor-alkali electrolysers. By local delivery of O2 gas to the electroactive Ag nanoclusters through the adjacent nanopipette, enhanced currents for the ORR at the Ag nanoparticles are recorded which are not accountable when considering the low solubility and slow diffusion of O2 in highly alkaline media. Instead, local oversaturation of O2 leads to current enhancement at the Ag nanoclusters. Due to the intrinsic high mass transport rates at the nanometric electrodes accompanied by local delivery of reactants, the method generally allows to study electrochemical reactions at single nanoparticles beyond the limitations induced by slow diffusion and low reactant concentration. Kinetic and mechanistic information, for instance derived from Tafel slopes, can be obtained from kinetic regimes not accessible to standard techniques.
- Open Access
- 22 December 2015
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 52 (11) , 2408-2411
Nanoelectrodes reveal the electrochemistry of single nickelhydroxide nanoparticles
Individual Ni(OH) 2 nanoparticles deposited on carbon nanoelectrodes are investigated in non-ensemble measurements with respect to their energy storage properties and electrocatalysis for the oxygen evolution reaction (OER).
- 22 December 2015
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 52 (11) , 2408-2411
Open AccessNanoelectrodes reveal the electrochemistry of single nickelhydroxide nanoparticles
Individual Ni(OH) 2 nanoparticles deposited on carbon nanoelectrodes are investigated in non-ensemble measurements with respect to their energy storage properties and electrocatalysis for the oxygen evolution reaction (OER).