Karin Lindqvist
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Karin Lindqvist has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Angelika Bachinger
RISE Research Institutes of Sweden AB Mölndal Sweden
1 shared publication - Anna Sandinge
RISE Research Institutes of Sweden Boras Sweden
1 shared publication - Anna Strid
RISE Research Institutes of Sweden AB Stockholm Sweden
1 shared publication Annika Boss
Swerea IVF AB
1 shared publicationBirgitha Nyström
Department of Materials Science, Swerea SICOMP AB, Box 271, SE-941 26 Piteå, Sweden
1 shared publication- Guan Gong
Materials and Production, Polymer, Fiber and Composite, RISE Research Institute of Sweden AB
1 shared publication
Latest Publications
- 9 November 2021
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 139 (13) , 51861
Systematic evaluation of bromine‐free flame‐retardant systems in acrylonitrile‐butadiene‐styrene
A systematic investigation of phosphorus‐based flame‐retardant (PFR) systems in acrylonitrile‐butadiene‐styrene (ABS) is presented. The effect of various PFRs, combinations thereof and influence of different synergists is studied in terms of fire and mechanical performance, as well as toxicity of resulting ABS. Sustainable flame‐retardant systems with a promising effect on the fire‐retardant properties of ABS are identified: A combination of aluminum diethylphosphinate and ammonium polyphosphate is shown to exhibit superior flame‐retardant properties in ABS compared to other studied PFRs and PFR combinations. Among a variety of studied potential synergists for this system, a grade of expandable graphite with a high‐initiation temperature and a molybdenum‐based smoke suppressant show the most promising effect, leading to a significant reduction of the peak heat release rate as well as the smoke production rate. Compared to current state‐of‐the‐art brominated flame‐retardant for ABS, the identified flame‐retardant systems reduce the maximum smoke production rate by 70% and the peak heat release rate by 40%. However, a significant reduction of the impact performance of the resulting ABS is identified, which requires further investigation.
- 9 November 2021
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 139 (13) , 51861
Systematic evaluation of bromine‐free flame‐retardant systems in acrylonitrile‐butadiene‐styrene
A systematic investigation of phosphorus‐based flame‐retardant (PFR) systems in acrylonitrile‐butadiene‐styrene (ABS) is presented. The effect of various PFRs, combinations thereof and influence of different synergists is studied in terms of fire and mechanical performance, as well as toxicity of resulting ABS. Sustainable flame‐retardant systems with a promising effect on the fire‐retardant properties of ABS are identified: A combination of aluminum diethylphosphinate and ammonium polyphosphate is shown to exhibit superior flame‐retardant properties in ABS compared to other studied PFRs and PFR combinations. Among a variety of studied potential synergists for this system, a grade of expandable graphite with a high‐initiation temperature and a molybdenum‐based smoke suppressant show the most promising effect, leading to a significant reduction of the peak heat release rate as well as the smoke production rate. Compared to current state‐of‐the‐art brominated flame‐retardant for ABS, the identified flame‐retardant systems reduce the maximum smoke production rate by 70% and the peak heat release rate by 40%. However, a significant reduction of the impact performance of the resulting ABS is identified, which requires further investigation.
- 19 December 2018
- Published by Springer Nature in Journal of Polymers and the Environment
- Vol. 27 (2) , 386-394
Thermal and Mechanical Properties of Blends Containing PP and Recycled XLPE Cable Waste
- 19 December 2018
- Published by Springer Nature in Journal of Polymers and the Environment
- Vol. 27 (2) , 386-394
Thermal and Mechanical Properties of Blends Containing PP and Recycled XLPE Cable Waste
- Open Access
- 2 January 2016
- Published by Taylor & Francis in Advanced Manufacturing: Polymer & Composites Science
- Vol. 2 (1) , 27-33
Experimental verification ofRe-Fibmethod for recycling fibres from composites
A new concept, Re-Fib, was developed within an EU project, REFORM, to recycle carbon and glass fibres from polymeric composite structures, aiming to reduce energy consumption and degradation of fibre properties during recycling. The optimized thermolysis treatment, 24 h at 380 °C, was verified able to recover clean fibres from most tested composite structures containing different thermoset resins (epoxy, vinyl ester, and polyester) and various core materials such as polyvinyl chloride (PVC), polyurethane (PU), and wood. Single-fibre test was performed in dynamic mechanical analysis (DMA). The reduction of strength was found around 26% for carbon fibres and 34–40% for glass fibres. Thermally recycled glass fibres were melt-compounded with recycled polypropylene (rPP); the resultant composites showed promising mechanical properties.
- 2 January 2016
- Published by Taylor & Francis in Advanced Manufacturing: Polymer & Composites Science
- Vol. 2 (1) , 27-33
Open AccessExperimental verification ofRe-Fibmethod for recycling fibres from composites
A new concept, Re-Fib, was developed within an EU project, REFORM, to recycle carbon and glass fibres from polymeric composite structures, aiming to reduce energy consumption and degradation of fibre properties during recycling. The optimized thermolysis treatment, 24 h at 380 °C, was verified able to recover clean fibres from most tested composite structures containing different thermoset resins (epoxy, vinyl ester, and polyester) and various core materials such as polyvinyl chloride (PVC), polyurethane (PU), and wood. Single-fibre test was performed in dynamic mechanical analysis (DMA). The reduction of strength was found around 26% for carbon fibres and 34–40% for glass fibres. Thermally recycled glass fibres were melt-compounded with recycled polypropylene (rPP); the resultant composites showed promising mechanical properties.