Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Urs Aeberhard has a total of 155 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Electro-thermal energy yield simulations for bifacial all-perovskite tandem modules

    by Urs Aeberhard, Andreas Schiller, Roger Häusermann, Roman Hiestand, Balthasar Blülle, Markus Kohlstädt, Mehrdad Najafi, Sjoerd Veenstra, Beat Ruhstaller

    The energy yield of bifacial all-perovskite tandem modules is quantified for a selected outdoor testing location using electro-thermal simulations on cell and module levels combined with a model providing spectral irradiance according to geographical location and time. Cell level modelling is performed using an opto-electronic drift-diffusion-Poisson simulation on the full tandem device under consideration of direct and diffuse front illumination according to the sun position and atmosphere model, and diffuse rear illumination according to the ground albedo. On module level we combine a two-dimensional finite-element large area simulation of the electrodes in an optimized layout for a 100 cm 2 monolithically interconnected module with the one-dimensional active area coupling law obtained from the simulated cell level characteristics. Thereby, thermal effects are considered regarding heat generation by light absorption, charge carrier transport and recombination, as well as heat transport through the stack and dissipation at the surface. To reduce the computational cost, operation conditions are binned with respect to limiting photocurrent, ambient temperature, and wind speed. After verification of the validity of the binning approach by comparison with full time-data modelling, it is used to compute the annual energy yield on cell level as a function of ground albedo and top cell band gap, confirming both, a large gain from bifaciality already at moderate albedo and the benefit from lower band gap top cells for high rear irradiation level due to large ground reflectivity. Finally, thermal effects and configuration-dependent cell-to-module losses are quantified via the evaluation of annual energy yield with the full electro-thermal module simulation, using the binned cell-level characteristics as well as the measured ambient temperature and wind speed as input. The results imply that an accurate assessment of upscaling losses is more critical for a reliable quantification of energy yield than consideration of the full temperature dependence.

  • Open Access

    Tailored PEDOT:PSS phase segregation for high-efficiency flexible all-perovskite tandem solar cells and mini-modules

    by Huagui Lai, Jingwei Zhu, Rui-Tung Kuo, Urs Aeberhard, Zhan-Hong Lin, Nada Mrkyvkova, Jincheng Luo, Severin Siegrist, Philipp Wechsler, Chih-Jen Shih, et al.

    Flexible all-perovskite tandem solar cells (TSCs) promise lightweight power for portable and aerospace uses, yet performance remains limited by interfacial losses in narrow-bandgap (NBG) sub-cells, particularly arising from poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS). Here, we uncover a previously unrecognized vertical phase segregation in PEDOT:PSS films, with an insulating PSS-rich surface layer atop a conductive PEDOT-rich base. This architecture induces interfacial electric dipoles that hinder efficient hole extraction. We find that the inclusion of Triton X-100 disrupts this segregation by modulating polymer interactions, thereby suppressing surface dipole formation. NBG perovskite cells incorporating this modified interface exhibit enhanced performance and reproducibility. This strategy enables flexible TSCs with a power conversion efficiency (PCE) of 25.4% and a proof-of-concept flexible tandem solar mini-module reaches 19.7%, with theoretical modeling projecting module efficiencies exceeding 24%. These results provide key insights into PEDOT:PSS interfacial phenomena and elucidate design principles for optimizing interfaces for next-generation flexible perovskite tandems.


  • Open Access

    Impact of Luminescent Coupling on Perovskite‐Silicon Tandem External Quantum Efficiency Quantified by Comprehensive Opto‐Electronic Simulation

    by Simon J. Zeder, Tabea Krucker, Davide Moia, Sandra Jenatsch, Kerem Artuk, Christian Wolff, Christophe Ballif, Beat Ruhstaller, Urs Aeberhard

    In this work, the effects of luminescent coupling (LC) on the external quantum efficiency (EQE) of perovskite‐silicon tandem (PST) solar cells are quantified by means of monochromatic transient photocurrent measurements and comprehensive optoelectronic simulations that take into account both optical and electrical coupling of the subcells. It is shown that, at short wavelengths, a similar response results from both LC and silicon bottom‐cell shunts. The two contributions can be discriminated and quantified based on bias voltage and light intensity‐dependent measurements. Such measurements were conducted on state‐of‐the‐art PST cells and agree well with the behavior predicted by the simulations. For the case of polychromatic EQE simulations, a quenching of the LC effects with decreasing concentration of mobile ions is found, which is explained in terms of ion‐modulated recombination via bulk defects.


  • Open Access

    Simulation, optimization, and experimental validation of 1eV GaAsSb/GaAsN superlattice solar cells

    by M. Schwarz, A. Gallego Carro, A. Gonzalo, V. Braza, D. Gonzalez, A. Hierro, U. Aeberhard, Jose M. Ulloa

  • Open Access

    Optimizing perovskite LEDs and tandem PV cells: The role of photon-recycling and luminescent coupling in presence of strong light scattering

    by Simon J. Zeder, Balthasar Blülle, Beat Ruhstaller, Urs Aeberhard

    Photon recycling (PR) in light-emitting and light-absorbing devices with incoherent scattering is investigated using a novel optical framework, self-consistently coupled to electrical models for current- and voltage-controlled devices to trace the inherent optoelectronic backcoupling associated with PR. This study reveals a universal competition between photon re-absorption and scattering processes, which governs performance across device types. In light-emitting diodes, the optimal emitter layer thickness is highly sensitive to scattering outcoupling structures and PR; their consideration in modeling is crucial. In addition, scattering structures impose stricter radiative efficiency requirements for PR to remain beneficial, highlighting the trade-off between loss mitigation and re-absorption penalties. For photovoltaic devices, the impact of front texturing on PR and luminescent coupling (LC) in perovskite–silicon tandem solar cells is quantified, including the first demonstration of luminescent self-coupling at the emissive perovskite-coated texture. While the texture minimally affects PR/LC overall, both scattering and re-absorption redistribute photogeneration. LC enhances tandem efficiency by 4.4%abs in the Auger limit for bottom-limited configurations, illustrating how photon redirection alleviates current-matching constraints.


  • Microscopic simulation of hot-carrier filtering in InAs-InP nanowire heterostructures

    by Urs Aeberhard

    We report on a microscopic quantum transport simulation of hot-carrier filtering across potential barriers formed by InP-InAs heterostructures in InAs nanowires with spatially localized monochromatic illumination. Qualitative agreement with the experimentally observed dependence of the extracted current on photon energy and localized source position is demonstrated. In addition, the impact on the hot-carrier extraction efficiency of carrier relaxation due to electron-phonon interaction is analyzed, and the inadequacy of the macroscopic drift-diffusion picture is confirmed.

  • Optics for terawatt-scale photovoltaics: review and perspectives

    by Klaus Jäger, Urs Aeberhard, Esther Alarcon Llado, Benedikt Bläsi, Sven Burger, Bruno Ehrler, Wilfried Favre, Antonín Fejfar, Tristan Gageot, Ivan Gordon, et al.

    Photovoltaics, a mature technology, is set to play a vital role in achieving a carbon-free energy system. This article examines the pivotal role of optics in advancing photovoltaics. We identify key scientific research areas where the optics community can make significant contributions. We are guided by the central question: How can optics facilitate the large-scale deployment of photovoltaics necessary for decarbonizing our societies?


  • Open Access

    Multi‐Scale Simulation of Reverse‐Bias Breakdown in All‐Perovskite Tandem Photovoltaic Modules under Partial Shading Conditions

    by Urs Aeberhard, Nelly Natsch, Andrin Schneider, Simon Jérôme Zeder, Hamilton Carrillo‐Nuñez, Balthasar Blülle, Beat Ruhstaller

    Herein, a multi‐scale simulation approach to quantify the impact of nonuniformities in cell‐level performance on the photovoltaic characteristics of monolithically interconnected large‐area all‐perovskite tandem modules under partial shading conditions is presented, addressing a crucial aspect of the up‐scaling challenge for this promising photovoltaic technology. To this end, current–voltage characteristics of small‐area all‐perovskite tandem solar cells are obtained for dark and illuminated cases from a calibrated optoelectronic device model using drift–diffusion simulation coupled to a quantum transport formalism for the band‐to‐band tunneling underlying the Zener breakdown. These current–voltage curves are computed for varying density of mobile ions and subsequently used as local 1D coupling laws connecting the 2D electrodes in a quasi‐3D large‐area finite‐element simulation approach that then provides the module characteristics under consideration of spatial variation in active area quality related to mobile ion density. The simulation reveals the appearance of localized current hot spots for the case where the shaded cell is strongly reverse biased.


  • Optical multiscale model for quantification of photon recycling including incoherent light scattering

    by Simon J. Zeder, Balthasar Blülle, Beat Ruhstaller, Urs Aeberhard

    A comprehensive multiscale modeling framework for photon recycling in textured solar cells and LEDs is introduced, treating light absorption and emission on an equal footing under consideration of the full internal mode spectrum in the device. The framework seamlessly merges a coherent emission model, free from unphysical divergence and ensuring consistency with detailed balance principles, with an incoherent net-radiation model applied to optically thick layers. The scattering of light at nonplanar interfaces is taken into consideration through four characteristic mappings that depict the microscopic scattering process, which are calculated analytically or by using a Monte-Carlo ray-tracing method. The final output of the model consists of energy- and angle-resolved local emission, re-absorption, and energy flux rates for further coupling to electronic transport. To validate the model, it has been compared with analytical solutions for the re-absorption probability in an ideal semiconductor slab with either ideal Lambertian or flat surfaces. The comparison between analytical and numerical calculations shows excellent agreement.


  • Effects of Photon Recycling and Luminescent Coupling in All‐Perovskite Tandem Solar Cells Assessed by Full Opto‐electronic Simulation

    by Urs Aeberhard, Simon J. Zeder, Beat Ruhstaller

    The impact of photon recycling (PR) and of luminescent coupling (LC) on the photovoltaic performance of all‐perovskite tandem solar cells is analyzed by the means of optical and full opto‐electronic device simulation. Optical processes are assessed using a comprehensive Green function formalism that considers wave optical effects also in emission. Starting from a consistent fit of experimental sub‐cell and tandem characteristics, the effects of re‐absorption are propagated from the optical limit to a situation with consideration of realistic charge transport across the entire tandem device. This also provides insight into the origin of performance losses due to sub‐cell and interconnection quality.