BRBeat Ruhstaller

Beat Ruhstaller

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Beat Ruhstaller has a total of 62 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Impact of Luminescent Coupling on Perovskite‐Silicon Tandem External Quantum Efficiency Quantified by Comprehensive Opto‐Electronic Simulation

    by Simon J. Zeder, Tabea Krucker, Davide Moia, Sandra Jenatsch, Kerem Artuk, Christian Wolff, Christophe Ballif, Beat Ruhstaller, Urs Aeberhard

    In this work, the effects of luminescent coupling (LC) on the external quantum efficiency (EQE) of perovskite‐silicon tandem (PST) solar cells are quantified by means of monochromatic transient photocurrent measurements and comprehensive optoelectronic simulations that take into account both optical and electrical coupling of the subcells. It is shown that, at short wavelengths, a similar response results from both LC and silicon bottom‐cell shunts. The two contributions can be discriminated and quantified based on bias voltage and light intensity‐dependent measurements. Such measurements were conducted on state‐of‐the‐art PST cells and agree well with the behavior predicted by the simulations. For the case of polychromatic EQE simulations, a quenching of the LC effects with decreasing concentration of mobile ions is found, which is explained in terms of ion‐modulated recombination via bulk defects.


  • Open Access

    A trade-off between efficiency and stability in a class of sky-blue OLEDs

    by Eglė Tankelevičiūtė, Sandra Jenatsch, Beat Ruhstaller, Eli Zysman-Colman, Ifor Samuel

    The stability of organic light-emitting diodes (OLEDs) is a key requirement for their use in commercial displays. One approach to increase the performance of the blue subpixel is to use thermally activated delayed fluorescence (TADF) emitters, which combine of a small singlet-triplet gap , EST, and non-trivial spin-orbit coupling to enable the harvesting of both singlet and triplet excitons to produce light; however, device stability is compromised due to long triplet lifetimes that increase the probability of materials degradation by biexcitonic and polaron events. In this work, we correlate the efficiency and stability of the device with the device structure, identifying possible origins for the trade-off between device efficiency and stability. By compar-ing a set of sky-blue emissive devices and fitting drift-diffusion simulations to intermittent opto-electronic measurements during stress-testing, the layers most affected by degradation can be determined. By coupling electrical simulations to an excitonic model, the contributions from biexcitonic and polaronic events to efficiency roll-off can be distinguished. We find that effi-cient, but less stable devices suffer mainly from exciton-exciton annihilation, while stable but less efficient devices have excitons predominantly quenched by polarons. This implies that the device structure is responsible for determining non-radiative exciton pathways, and an efficient and stable OLED structure should aim to minimize exciton accumulation at high brightness.

  • Open Access

    Optimizing perovskite LEDs and tandem PV cells: The role of photon-recycling and luminescent coupling in presence of strong light scattering

    by Simon J. Zeder, Balthasar Blülle, Beat Ruhstaller, Urs Aeberhard

    Photon recycling (PR) in light-emitting and light-absorbing devices with incoherent scattering is investigated using a novel optical framework, self-consistently coupled to electrical models for current- and voltage-controlled devices to trace the inherent optoelectronic backcoupling associated with PR. This study reveals a universal competition between photon re-absorption and scattering processes, which governs performance across device types. In light-emitting diodes, the optimal emitter layer thickness is highly sensitive to scattering outcoupling structures and PR; their consideration in modeling is crucial. In addition, scattering structures impose stricter radiative efficiency requirements for PR to remain beneficial, highlighting the trade-off between loss mitigation and re-absorption penalties. For photovoltaic devices, the impact of front texturing on PR and luminescent coupling (LC) in perovskite–silicon tandem solar cells is quantified, including the first demonstration of luminescent self-coupling at the emissive perovskite-coated texture. While the texture minimally affects PR/LC overall, both scattering and re-absorption redistribute photogeneration. LC enhances tandem efficiency by 4.4%abs in the Auger limit for bottom-limited configurations, illustrating how photon redirection alleviates current-matching constraints.


  • Open Access

    Multi‐Scale Simulation of Reverse‐Bias Breakdown in All‐Perovskite Tandem Photovoltaic Modules under Partial Shading Conditions

    by Urs Aeberhard, Nelly Natsch, Andrin Schneider, Simon Jérôme Zeder, Hamilton Carrillo‐Nuñez, Balthasar Blülle, Beat Ruhstaller

    Herein, a multi‐scale simulation approach to quantify the impact of nonuniformities in cell‐level performance on the photovoltaic characteristics of monolithically interconnected large‐area all‐perovskite tandem modules under partial shading conditions is presented, addressing a crucial aspect of the up‐scaling challenge for this promising photovoltaic technology. To this end, current–voltage characteristics of small‐area all‐perovskite tandem solar cells are obtained for dark and illuminated cases from a calibrated optoelectronic device model using drift–diffusion simulation coupled to a quantum transport formalism for the band‐to‐band tunneling underlying the Zener breakdown. These current–voltage curves are computed for varying density of mobile ions and subsequently used as local 1D coupling laws connecting the 2D electrodes in a quasi‐3D large‐area finite‐element simulation approach that then provides the module characteristics under consideration of spatial variation in active area quality related to mobile ion density. The simulation reveals the appearance of localized current hot spots for the case where the shaded cell is strongly reverse biased.


  • Effects of Photon Recycling and Luminescent Coupling in All‐Perovskite Tandem Solar Cells Assessed by Full Opto‐electronic Simulation

    by Urs Aeberhard, Simon J. Zeder, Beat Ruhstaller

    The impact of photon recycling (PR) and of luminescent coupling (LC) on the photovoltaic performance of all‐perovskite tandem solar cells is analyzed by the means of optical and full opto‐electronic device simulation. Optical processes are assessed using a comprehensive Green function formalism that considers wave optical effects also in emission. Starting from a consistent fit of experimental sub‐cell and tandem characteristics, the effects of re‐absorption are propagated from the optical limit to a situation with consideration of realistic charge transport across the entire tandem device. This also provides insight into the origin of performance losses due to sub‐cell and interconnection quality.


  • Open Access

    Deep ensemble inverse model for image-based estimation of solar cell parameters

    by M. Battaglia, E. Comi, T. Stadelmann, R. Hiestand, B. Ruhstaller, E. Knapp

    Physical models can help improve solar cell efficiency during the design phase and for quality control after the fabrication process. We present a data-driven approach to inverse modeling that can predict the underlying parameters of a finite element method solar cell model based on an electroluminescence (EL) image of a solar cell with known cell geometry and laser scribed defects. For training the inverse model, 75 000 synthetic EL images were generated with randomized parameters of the physical cell model. We combine 17 deep convolutional neural networks based on a modified VGG19 architecture into a deep ensemble to add uncertainty estimates. Using the silicon solar cell model, we show that such a novel approach to data-driven statistical inverse modeling can help apply recent developments in deep learning to new engineering applications that require real-time parameterizations of physical models augmented by confidence intervals. The trained network was tested on four different physical solar cell samples, and the estimated parameters were used to create the corresponding model representations. Resimulations of the measurements yielded relative deviations of the calculated and the measured junction voltage values of 0.2% on average with a maximum of 10%, demonstrating the validity of the approach.


  • Open Access

    Assessment of Photon Recycling in Perovskite Solar Cells by Fully Coupled Optoelectronic Simulation

    by Simon Zeder, Beat Ruhstaller, Urs Aeberhard

    An optical dyadic Green’s function framework to describe the transverse electromagnetic fields in a planar perovskite solar-cell stack is coupled to an electronic drift-diffusion model for rigorous treatment of photon recycling in the wave-optics regime for a realistic photovoltaic device. The optical model provides the local reabsorption rate as well as a detailed-balance compatible radiative prefactor, which are used in the electronic model to achieve a self-consistent solution that yields the full optoelectronic device characteristics. The presented approach provides detailed insights into the impact of photon recycling on device performance under different regimes of charge transport and recombination and can help identify the various electronic and optical losses for nonideal, realistic devices. The global efficiency of photon recycling is quantified by defining quantum efficiencies of reabsorbed radiation, while the local efficiency can furthermore be quantified by defining an effective local radiative prefactor. The model introduced here can be used to guide the design of future devices that exploit the full potential of photon recycling.


  • A robust routine for reliable 1-D transient photoluminescence simulations

    by Antonio Cabas Vidani, Simon Zeder, Urs Aeberhard, Beat Ruhstaller

  • Photon recycling in perovskite solar cells assessed by a detailed-balance compatible dipole emission model

    by Urs Aeberhard, Simon J. Zeder, Beat Ruhstaller

    Secondary photogeneration due to reabsorption of internally emitted photons in metal halide perovskites is assessed using a novel dipole emission model that is compatible with detailed balance rates. The model considers the non-uniform local photon density of states of thin film absorbers consistently in internal and external emission and provides insight into the impact of photon confinement on the effectiveness of photon recycling in the wave optics regime. New and general expressions for local radiative recombination and generation rates in terms of the local values of refractive index, extinction coefficient, density of states, and quasi-Fermi level splitting allow for a seamless integration of photon recycling into full opto-electronic device simulation frameworks.