AAAmir Ahmad Ajami

Amir Ahmad Ajami

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Amir Ahmad Ajami has a total of 26 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Comparison of the effect of bleaching with 15% carbamide peroxideand 35% hydrogen peroxide on flexural strength of Cention N in selfcuredand dual-cured polymerization modes

    by Narmin Mohammadi, Soodabeh Kimyai, Yasaman Ghavami Lahij, Mahmoud Bahari, Amir Ahmad Ajami, Mahdi Abed Kahnamouei, Mehdi Daneshpooy

    Background. The use of bleaching agents might result in microstructural changes in tooth structure andin restorative materials. This study compared the effects of bleaching with %15 carbamide peroxide and%35 hydrogen peroxide on the flexural strength of Cention N restorative material using the self-curedand dual-cured polymerization modes. Methods. Sixty bar-shaped samples of Cention N restorative material were included in this in vitrostudy and assigned to three groups (n=20) randomly: control, bleaching with %15 carbamide peroxideand bleaching with %35 hydrogen peroxide. Each group was divided into two subgroups: samplespolymerized in the self-cured mode and samples polymerized in the dual-cured mode. Then the flexuralstrengths of the samples were determined. Two-way ANOVA was used to compare flexural strengthsbetween the three groups in two polymerization modes, followed by post hoc Tukey test. Statisticalsignificance was defined at PResults. The difference in the mean flexural strength was significant in terms of the bleaching regimen(PConclusion. The application of %15 carbamide peroxide and %35 hydrogen peroxide bleaching agentsdecreased the flexural strength of Cention N restorative material. Irrespective of the bleaching regimen,there was no significant difference in the flexural strength of Cention N between the self-curing anddual-curing polymerization modes.


  • Open Access

    Antibacterial Effect of All-in-one Self-etch Adhesives on Enterococcus faecalis.

    by Mohammad Esmaeel Ebrahimi Chaharom, Amir Ahmad Ajami, Mehdi Abed Kahnamouei, Elmira Jafari Navimipour, Pardis Tehranchi, Vahid Zand, Mohammad Reza Sadeghi, Aydin Sohrabi

    Background and aims. The aim of this study was to evaluate the antibacterial activity of one-step self-etch adhesives on Enterococcus faecalis on days 1, 7 and 14 with the use of modified direct contact test. Materials and methods. The modified directcontact test was used to evaluate the antibacterial effect of Adper Easy One, Bond Force, Clearfil S3 Bond, Futurabond M, G-Bond, iBond and OptiBond All-in-one adhesives on Enterococcus faecalis after aging the samples in phosphate-buffered saline for one, seven and fourteen days. Data were analyzed using one-way ANOVA and post hoc Tukey tests. Aging effect of each adhesive was evaluated by paired-sample test. In this study, P<0.05 was considered significant. Results. All the tested adhesives exhibited antibacterial activity after one day and had significant differences with the positive control group (P<0.05). After one week, OptiBond All-in-one, iBond and Futurabond M exhibited significant differences in bacterial growth from other groups (P0.05). Conclusion. iBond exhibited the highest antibacterial effect on E. faecalis after one week. Futurabond and OptiBond All-in-one exhibited antibacterial effects against E. faecalis for one week.


  • Effect of Three Different Contamination Removal Methods on Bond Strength of a Self-etching Adhesive to Dentin Contaminated with an Aluminum Chloride Hemostatic Agent

    by Siavash Savadi Oskoee, Mahmoud Bahari, Amir Ahmad Ajami, Mehdi Abed Kahnamoii, Soodabeh Kimyai, Fatemeh Pournaghi-Azar

    Aim: This study evaluated the effect of three different contamination removal methods on bond strength of one-step self-etching adhesive to dentin contaminated with an aluminum chloride hemostatic agent. Materials and methods: One hundred noncarious adult molars were used in this study; 2-mm-thick dentin disks were prepared and randomly assigned to 5 groups (n = 20). Group I: control; group II: hemostatic agent-contaminated; group III: hemostatic agent-contaminated and rinsing with water; group IV: hemostatic agent-contaminated and ethylene diamine tetraacetic acid (EDTA) application; and group V: hemostatic agent-contaminated and phosphoric acid application. Clearfil S3 Bond was used to bond composite to dentin surfaces. Subsequent to adding composite cylinders the shear bond strength test was performed. Data were analyzed by one-way ANOVA and Tukey test. Two additional specimens from each group were prepared and evaluated under scanning electron microscope (SEM). Results: There were statistically significant differences in bond strength among the groups (p < 0.001). In two-by-two comparisons statistically significant differences were observed in bond strength values between all the groups (p < 0.001) except for groups I and IV (p = 0.933). Conclusion: Aluminum chloride hemostatic agent adversely affected the bond strength of self-etch adhesive to dentin. However, application of EDTA increased the bond strength to the level of normal dentin. Clinical significance: EDTA and phosphoric acid removed aluminum chloride hemostatic agent contamination of dentin surfaces. However, unlike EDTA phosphoric acid failed to increase the bond strength of self-etch adhesive to dentin to the level of the control group. How to cite this article: Ajami AA, Kahnamoii MA, Kimyai S, Oskoee SS, Pournaghi-Azar F, Bahari M, Firouzmandi M. Effect of Three Different Contamination Removal Methods on Bond Strength of a Self-etching Adhesive to Dentin Contaminated with an Aluminum Chloride Hemostatic Agent. J Contemp Dent Pract 2013;14(1):26-33.


  • The Effect of Composite Fiber Insertion along with Lowshrinking Composite Resin on Cuspal Deflection of Root-filled Maxillary Premolars

    by Siavash Savadi Oskoee, Amir Ahmad Ajami, Parnian Alizadeh Oskoee, Elmira Jafari Navimipour, Gazale Ahmadi Zonuz, Mahmood Bahari, Fatemeh Pournaghiazar

    Aim: The aim of the present study was to evaluate the effect of three methods of composite fiber placement along with siloranebased composite resin on cuspal deflection and fracture strength of root-filled maxillary premolars. Materials and methods: Mesio-occluso-distal cavities were prepared in 60 extracted premolars subsequent to endodontic treatment. The remaining thickness of buccal and lingual walls at height of contour was 2.5 ± 0.2 mm and the gingival cavosurface margin was 1.5 mm coronal to cementoenamel junction. Subsequent to measurement of primary intercuspal distances, the teeth were randomly divided into four groups. In group 1, the cavities were only filled with Filtek Silorane composite resin. In the other three groups, preimpregnated glass fibers were placed at gingival, middle and occlusal thirds respectively, and the cavities were restored similar to the group 1. Cuspal deflection was recorded in micrometer using a stereomicroscope. Fracture strength of the samples was measured in Newton subsequent to thermocycling. Data was analyzed using Kruskal-Wallis, Mann-Whitney U, one-way ANOVA and post-hoc Tukey tests at a significance level of p < 0.05. Results: The highest cuspal deflection was recorded in the group 1, and the difference between group 1 and other groups was significant (p < 0.001). Fracture resistance in group 4 was significantly higher than that in other groups (p < 0.001). Conclusion: In restoring root-filled premolars with siloranebased composite resins, cuspal deflection decreased with the use of preimpregnated glass fibers. Clinical significance: Using preimpregnated glass fibers along with silorane-based composite resin may lead to better results in cuspal deflection and fracture resistance of endodonticallytreated maxillary premolars. How to cite this article: Oskoee SS, Oskoee PA, Navimipour EJ, Ajami AA, Zonuz GA, Bahari M, Pournaghiazar F. The Effect of Composite Fiber Insertion along with Low-shrinking Composite Resin on Cuspal Deflection of Root-filled Maxillary Premolars. J Contemp Dent Pract 2012;13(5):595-601.


  • Effect of Three Different Mouthrinses on Microleakage of Composite Resin Restorations with Two Adhesive Systems after Bleaching with 10% Carbamide Peroxide

    by Soodabeh Kimyai, Siavash Savadi Oskoee, Amir Ahmad Ajami, Mahmoud Bahari, Mehdi Abed Kahnamoui, Sahand Rikhtegaran, Rahim Ghaffarian

    The aim was to evaluate the effects of Oral-B (OB), Listerine (LN) and Rembrandt Plus (RM) mouthrinses on microleakage of composite resin restorations bonded with two adhesive systems after bleaching with 10% carbamide peroxide. A total of 60 Cl V cavities were prepared on human premolars. The occlusal and gingival margins were placed 1 mm occlusal to and apical to CEJ respectively. The teeth were randomly divided into two groups based on the adhesive system used: Excite (EX) and Clearfil SE Bond (CSE) groups. After composite resin restoration of cavities, thermocycling and bleaching with 10% carbamide peroxide for 2 hours daily for 14 days, the teeth in each adhesive group were further subdivided into three subgroups and were immersed for 12 hours in the three OB, RM and LN mouthrinses. The teeth were then placed in 2% basic fuschin for 24 hours. After dissecting the teeth, microleakage was evaluated under a stereomicroscope at 16×. Data was analyzed with multifactor ANOVA and Bonferroni test at p < 0.05. Microleakage with EX was significantly higher than that with CSE (p = 0.009). Microleakage at gingival margins was significantly higher than that at occlusal margins (p = 0.15). Microleakage with OB was higher than that with LN (p = 0.02). However, there were no significant differences in microleakage between LN and RM (p = 1) and between RM and OB (p = 0.15). In addition, with the EX adhesive system, microleakage with OB was higher than that with LN and RM (p = 0.02). In the present study, microleakage of composite resin restorations was influenced by the type of the adhesive system, mouthrinse type and the location of the cavity margin. Use of some mouthrinses, such as OB after bleaching can increase postrestoration microleakage of resin composite restorations bonded with etch-and-rinse adhesive systems.


  • Open Access

    Effect of chlorhexidine on the shear bond strength of self-etch adhesives to dentin

    by Esmaeel Ebrahimi Chaharom Mohammad, Ahmad Ajami Amir, Kimyai Soodabeh, Abbasi Ahmad

    The aim of this study was to investigate the effect of chlorhexidine on shear bond strength of self-etch adhesives to dentin. The crowns of 60 sound human premolars were horizontally sectioned to expose the coronal dentin. Dentin surfaces were polished with 320 grit silicon carbide papers, and were randomly divided into 4 groups (n = 15). In group 1, two-step self-etch adhesive resin (Clearfil SE Bond) was used. In group 2, the surface was rinsed with chlorhexidine 2% solution prior to Clearfil SE bond application. In groups 3 and 4, the procedure was repeated similar to groups 1 and 2. In this case, one-step self-etch adhesive resin (Clearfil S3 Bond) was used. Then Z100 composite resin was applied. Subsequent to thermocycling, the shear bond strengths were measured. Data were analyzed using one-way ANOVA. In this study, p < 0.05 was considered significant. There were no significant differences between groups (p = 0.321). The use of 2% chlorhexidine had no effect on the shear bond strength of two-step and one-step self-etching adhesive resins. Moreover, there was no significant difference in the shear bond strength values between two-step and one-step self-etching adhesive resins. Key words: Chlorhexidine, shear bond strength, one-step self-etch adhesive resin, two-step self-etch adhesive resin.


  • Comparison of Microleakage of Three Adhesive Systems in Class V Composite Restorations Prepared with Er,Cr:YSGG Laser

    by Soodabeh Kimyai, Amir Ahmad Ajami, Mohammad Esmaeel Ebrahimi Chaharom, Jafar Sadjadi Oskoee

    Objective: This study compared microleakage of three adhesives in class V (CI V) composite restorations prepared with Er,Cr:YSGG laser. Background Data: Changes produced on enamel and dentin surfaces subsequent to laser irradiation influence microleakage of composite restorations. Materials and Methods: CI V cavities were prepared in 80 sound extracted human premolars with Er,Cr:YSGG laser. The teeth were randomly divided into 4 groups ( n = 20). In group 1, a total-etch adhesive was used, and two-step and one-step self-etch adhesives were used in groups 2 and 3, respectively. Group 4 was the control group with no adhesives. Following restoration and thermocycling, microleakage was evaluated. To compare microleakage in occlusal and gingival margins in each group, the Wilcoxon test was used. Kruskal–Wallis analysis was used for comparison of occlusal and gingival microleakage, and two-by-two comparisons were made using the Mann–Whitney U test. Results: There were significant differences in microleakage between occlusal and gingival margins in each group except for the control group. Significant differences were observed in occlusal and gingival microleakage among all the groups. Two-by-two comparisons revealed significant differences in occlusal microleakage between the control group and the other groups. There were significant differences in gingival microleakage between groups 1 and 2 and groups 1 and 3; however, differences in gingival microleakage between groups 2 and 3 were not significant. Conclusion: With all the adhesives, microleakage was significantly higher in gingival margins compared with occlusal margins. In occlusal margins, there were no significant differences in microleakage among the three adhesives. In gingival margins, self-etch adhesives revealed less microleakage than the total-etch adhesive.


  • Open Access

    Comparison of the effect of hydrogel and solution forms of sodium ascorbate on orthodontic bracket-enamel shear bond strength immediately after bleaching: Anin vitrostudy

    by Soodabeh Kimyai, Siavash Savadi Oskoee, Ali Rafighi, Hadi Valizadeh, Amir Ahmad Ajami, Zahra Norooz Zadeh Helali

    Aim: This study compared the effects of hydrogel and solution forms of sodium ascorbate (SA) with two different application times on bracket bond strength subsequent to bleaching. Materials and Methods: A total of 72 sound premolars were randomly divided into six groups (n = 12): An unbleached control group (group one) and five experimental groups of carbamide peroxide. Specimens in group two were bonded immediately after bleaching; specimens in groups three and four were bleached, then treated with SA solution for ten minutes and three hours, respectively, and then bonded. In groups five and six, SA hydrogel was used and the specimens were prepared similar to groups three and four, respectively. Following debonding, bond strengths were recorded in MPa. To evaluate the amount of resin left on the enamel surfaces, adhesive remnant index (ARI) scores were used. Statistical Analysis: The bond strength data were analyzed with ANOVA and pairwise comparisons were made by Tukey test. The ARI data were subjected to Kruskal-Wallis test and two-by-two comparisons were made by the Mann-Whitney U test. Results: There were significant differences in bond strengths between the groups ( P < 0.0005). However, the differences between groups three, four, five and six were not significant. Furthermore, there were no significant differences between group one and groups four and six, whereas the differences between the other groups were significant ( P < 0.05). Regarding ARI, there were significant differences among the groups ( P = 0.004). Conclusion: Bleaching significantly decreased the bracket bond strength. Compromised bonding was reversed with a three-hour application of both forms of SA.


  • The Effect of Three Composite Fiber Insertion Techniques on Fracture Resistance of Root-filled Teeth

    by Parnian Alizadeh Oskoee, Amir Ahmad Ajami, Elmira Jafari Navimipour, Siavash Savadi Oskoee, Jafar Sadjadi