ARAlberto Ronzani

Alberto Ronzani

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Alberto Ronzani has a total of 117 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    SC-1 etching of niobium and titanium nitride thin films

    by Adrián Gutiérrez-Cruz, K. A. C. Rathnathilaka, Jani M. Taskinen, Tuomas Vaimala, Kestutis Grigoras, Harshad Mishra, Rishabh Upadhyay, Jorden Senior, Alberto Ronzani

    Dry etching techniques, ubiquitous in microelectronics fabrication, often result in challenging levels of undesired collateral plasma-induced damage. In this work, we demonstrate a wet etching alternative for the patterning of niobium (Nb) and titanium nitride (TiN) thin films using the Standard Cleaning 1 (SC-1) solution. We characterize the etching process through its time-evolution dynamics, supported by scanning-electron and atomic force microscopy assessment of the etched film morphology. The results suggest etch dynamics that are linked to native oxides and film microstructure. Overall, the manageable etch rates, the safe operation and the high material selectivity are attractive for practical use in microelectronics fabrication.

  • Native-oxide-passivated trilayer junctions for superconducting qubits

    by Pankaj Sethi, Om Prakash, Jukka-Pekka Kaikkonen, Mikael Kervinen, Elsa T. Mannila, Mário Ribeiro, Debopam Datta, Christopher W. Förbom, Jorden Senior, Renan P. Loreto, et al.


  • Efficient electronic cooling by niobium-based superconducting tunnel junctions

    by J. Hätinen, A. Ronzani, R.P. Loreto, E. Mykkänen, A. Kemppinen, K. Viisanen, T. Rantanen, J. Geisor, J.S. Lehtinen, M. Ribeiro, et al.


  • Open Access

    Scalable on-chip multiplexing of silicon single and double quantum dots

    by Heorhii Bohuslavskyi, Alberto Ronzani, Joel Hätinen, Arto Rantala, Andrey Shchepetov, Panu Koppinen, Janne S. Lehtinen, Mika Prunnila

    Owing to the maturity of complementary metal oxide semiconductor (CMOS) microelectronics, qubits realized with spins in silicon quantum dots (QDs) are considered among the most promising technologies for building scalable quantum computers. For this goal, ultra-low-power on-chip cryogenic CMOS (cryo-CMOS) electronics for control, read-out, and interfacing of the qubits is an important milestone. We report on-chip interfacing of tunable electron and hole QDs by a 64-channel cryo-CMOS multiplexer with less-than-detectable static power dissipation. We analyze charge noise and measure state-of-the-art addition energies and gate lever arm parameters in the QDs. We correlate low noise in QDs and sharp turn-on characteristics in cryogenic transistors, both fabricated with the same gate stack. Finally, we demonstrate that our hybrid quantum-CMOS technology provides a route to scalable interfacing of a large number of QD devices, enabling, for example, variability analysis and QD qubit geometry optimization, which are prerequisites for building large-scale silicon-based quantum computers.


  • Open Access

    Effect of ion irradiation on superconducting thin films

    by Katja Kohopää, Alberto Ronzani, Robab Najafi Jabdaraghi, Arijit Bera, Mário Ribeiro, Dibyendu Hazra, Jorden Senior, Mika Prunnila, Joonas Govenius, Janne S. Lehtinen, et al.

    We demonstrate ion irradiation by argon or gallium as a wafer-scale post-processing method to increase disorder in superconducting thin films. We study several widely used superconductors, both single-elements and compounds. We show that ion irradiation increases normal-state resistivity in all our films, which is expected to enable tuning their superconducting properties, for example, toward a higher kinetic inductance. We observe an increase in superconducting transition temperature for Al and MoSi and a decrease for Nb, NbN, and TiN. In MoSi, ion irradiation also improves the mixing of the two materials. We demonstrate the fabrication of an amorphous and homogeneous film of MoSi with uniform thickness, which is promising, for example, for superconducting nanowire single-photon detectors.


  • Open Access

    Thermal resistance in superconducting flip-chip assemblies

    by J. Hätinen, E. Mykkänen, K. Viisanen, A. Ronzani, A. Kemppinen, L. Lehtisyrjä, J. S. Lehtinen, M. Prunnila

    Cryogenic microsystems that utilize different 3D integration techniques are being actively developed, e.g., for the needs of quantum technologies. 3D integration can introduce opportunities and challenges to the thermal management of low temperature devices. In this work, we investigate sub-1 K inter-chip thermal resistance of a flip-chip bonded assembly, where two silicon chips are interconnected by compression bonding via indium bumps. The total thermal contact area between the chips is 0.306 mm2, and we find that the temperature dependence of the inter-chip thermal resistance follows the power law of αT−3, with α=7.7–15.4 K4μm2/nW. The T−3 relation indicates phononic interfacial thermal resistance, which is supported by the vanishing contribution of the electrons to the thermal conduction, due to the superconducting interconnections. Such a thermal resistance value can introduce a thermalization bottleneck in particular at cryogenic temperatures. This can be detrimental for some applications, yet it can also be harnessed. We provide an example of both cases by estimating the parasitic overheating of a cryogenic flip-chip assembly operated under various heat loads as well as simulate the performance of solid-state junction microrefrigerators utilizing the observed thermal isolation.


  • Open Access

    Qubit-Compatible Substrates With Superconducting Through-Silicon Vias

    by K. Grigoras, N. Yurttagul, J.-P. Kaikkonen, E. T. Mannila, P. Eskelinen, D. P. Lozano, H.-X. Li, M. Rommel, D. Shiri, N. Tiencken, et al.

    We fabricate and characterize superconducting through-silicon vias and electrodes suitable for superconducting quantum processors. We measure internal quality factors of a million for test resonators excited at single-photon levels, on chips with superconducting vias used to stitch ground planes on the front and back sides of the chips. This resonator performance is on par with the state of the art for silicon-based planar solutions, despite the presence of vias. Via stitching of ground planes is an important enabling technology for increasing the physical size of quantum processor chips, and is a first step toward more complex quantum devices with three-dimensional integration.


  • Cascaded superconducting junction refrigerators: Optimization and performance limits

    by A. Kemppinen, A. Ronzani, E. Mykkänen, J. Hätinen, J. S. Lehtinen, M. Prunnila

    We demonstrate highly transparent silicon–vanadium and silicon–aluminum tunnel junctions with relatively low sub-gap leakage current and discuss how a trade-off typically encountered between transparency and leakage affects their refrigeration performance. We theoretically investigate cascaded superconducting tunnel junction refrigerators with two or more refrigeration stages. In particular, we develop an approximate method that takes into account self-heating effects but still allows us to optimize the cascade a single stage at a time. We design a cascade consisting of energy-efficient refrigeration stages, which makes cooling of, e.g., quantum devices from above 1 K to below 100 mK a realistic experimental target.


  • Open Access

    Dispersive readout of reconfigurable ambipolar quantum dots in a silicon-on-insulator nanowire

    by Jingyu Duan, Janne S. Lehtinen, Michael A. Fogarty, Simon Schaal, Michelle M. L. Lam, Alberto Ronzani, Andrey Shchepetov, Panu Koppinen, Mika Prunnila, Fernando Gonzalez-Zalba, et al.

    We report on ambipolar gate-defined quantum dots in silicon on insulator nanowires fabricated using a customized complementary metal–oxide–semiconductor process. The ambipolarity was achieved by extending a gate over an intrinsic silicon channel to both highly doped n-type and p-type terminals. We utilize the ability to supply ambipolar carrier reservoirs to the silicon channel to demonstrate an ability to reconfigurably define, with the same electrodes, double quantum dots with either holes or electrons. We use gate-based reflectometry to sense the inter-dot charge transition (IDT) of both electron and hole double quantum dots, achieving a minimum integration time of 160 (100) μs for electrons (holes). Our results present the opportunity to combine, in a single device, the long coherence times of electron spins with the electrically controllable hole spins in silicon.


  • Open Access

    Enhancement of Superconductivity by Amorphizing Molybdenum Silicide Films Using a Focused Ion Beam

    by Emma Mykkänen, Arijit Bera, Janne S. Lehtinen, Alberto Ronzani, Katja Kohopää, Teresa Hönigl-Decrinis, Rais Shaikhaidarov, Sebastian E. de Graaf, Joonas Govenius, Mika Prunnila

    We have used focused ion beam irradiation to progressively cause defects in annealed molybdenum silicide thin films. Without the treatment, the films are superconducting with critical temperature of about 1 K. We observe that both resistivity and critical temperature increase as the ion dose is increased. For resistivity, the increase is almost linear, whereas critical temperature changes abruptly at the smallest doses and then remains almost constant at 4 K. We believe that our results originate from amorphization of the polycrystalline molybdenum silicide films.