Inmaculada Plaza

Inmaculada Plaza

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Inmaculada Plaza has a total of 36 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Adaptation of the Inverse of Equivalent Conductance Method for Crosstalk Compensation in Resistive Sensor Arrays With Parallel Readout

    by Sergio Domínguez-Gimeno, Carlos Medrano-Sánchez, Javier Martínez-Cesteros, Raul Igual-Catalán, Inmaculada Plaza-García

    Resistive sensor arrays (RSAs) are arrangements of resistive sensors formed by shared conductive rows and columns. Each sensor is read selecting one row and column at the same time. The voltage divider circuit (VDC) is a basic circuit for RSA readout. Other circuits described in the literature allow several columns to be read at the same time, which is known as parallel readout. In this work, parallel readout is applied for the first time to VDCs, leading to a new readout circuit for RSAs: the parallel-VDC (P-VDC). This circuit has been theoretically analyzed and qualitatively compared to other readout circuits, showing several strengths such as simplicity, easy non-idealities compensation, and lower power consumption. Crosstalk is a major problem in RSAs, which appears due to the row-column selection method. It has been compensated by a novel adaptation of the Inverse of Equivalent Conductance Method, based on effective conductances instead of equivalent ones. The feasibility of this new method is assessed through both simulations, and laboratory experiments with a physical prototype of the P-VDC. The results show that the P-VDC presents lower base error than the basic VDC, and faster data acquisition due to parallel readout. In addition, the impact of uncertainty on the method is evaluated, and quantitative comparisons were made with other state-of-the-art circuits, where it demonstrates competitive performance. Moreover, it has been applied to plantar pressure measurement with RSAs, proving to be a feasible approach.

  • Open Access

    A New Approach for Real-Time Center-of-Pressure Correction in Pressure Sensitive Mats Using Feedforward Neural Networks

    by Sergio Domínguez Gimeno, Raul Igual Catalán, Carlos Medrano Sánchez, Inmaculada Plaza García, Javier Martínez Cesteros, Marco Pasetti

    Center-of-pressure (CoP) is a good clinical indicator in balance tests and fall-risk assessment. It can be detected using pressure sensitive mats (PSMs), which are affordable. However, these can suffer from certain non-idealities, like hysteresis, creep, etc. These effects have been assessed in literature. However, proposed algorithms have low computation speed and are complex. In this work, a completely new approach based on feed-forward neural networks (FFNNs) is proposed with the goal of correcting the CoP given by PSMs, allowing real-time correction. Its performance is compared in terms of error and computation times with a state-of-the-art model, which corrects for hysteresis and creep in the PSM. Results show that FFNN can correct for the CoP measurements, providing a good accuracy-speed balance.


  • Open Access

    Sensor Arrays: A Comprehensive Systematic Review

    by Sergio Domínguez-Gimeno, Raúl Igual-Catalán, Inmaculada Plaza-García

    Sensor arrays are arrangements of sensors that follow a certain pattern, usually in a row–column distribution. This study presents a systematic review on sensor arrays. For this purpose, several systematic searches of recent studies covering a period of 10 years were performed. As a result of these searches, 361 papers have been analyzed in detail. The most relevant aspects for sensor array design have been studied. In relation to sensing technologies, different categories were identified: resistive/piezoresistive, capacitive, inductive, diode-based, transistor-based, triboelectric, fiber optic, Hall effect-based, piezoelectric, and bioimpedance-based. Other aspects of sensor array design have also been analyzed: applications, validation experiments, software used for sensor array data analysis, sensor array characteristics, and performance metrics. For each aspect, the studies were classified into different subcategories. As a result of this analysis, different emerging technologies and future research challenges in sensor arrays were identified.


  • Open Access

    Optimized Creep-Hysteresis Model to Improve Center-of-Pressure Detection in Pressure-Sensitive Mats

    by Sergio Domínguez-Gimeno, Carlos Medrano-Sanchez, Raul Igual-Catalan, Inmaculada Plaza-Garcia

    Pressure sensitive mats (PSMs) have a wide variety of applications. They can be used to measure the center of pressure (CoP) when a person is standing. Measuring CoP is useful for several applications, such as human stability assessment or fall risk prediction. Low-cost PSMs can be manufactured using piezoresistive materials, such as Velostat®, whose conductance depends on the pressure exerted. However, these low-cost materials often suffer from hysteresis and creep. These effects worsen CoP measurement. Therefore, correction of hysteresis and creep effects is required to improve it. In this study, a creep-hysteresis correction model is applied to quantify CoP displacements obtained with PSMs. The model to correct creep and hysteresis effects is optimized using the CoP measurements themselves. This is a novel approach to optimize the creep and hysteresis model for this application. This approach has been experimentally tested on three different PSMs, including a commercial mat. Several tests and comparisons with existing models were performed, resulting in an improvement in CoP measurement when the CoP-optimized creep-hysteresis correction model was applied.


  • TECHNOLOGY RESOURCES FOR BLENDED LABORATORY TEACHING IN AN ELECTRONIC INSTRUMENTATION COURSE

    by Carlos Medrano-Sánchez, Juan Carlos García-López, Inmaculada Plaza-García, Guillermo Palacios-Navarro

  • Open Access

    Fall Detection in Low-Illumination Environments From Far-Infrared Images Using Pose Detection and Dynamic Descriptors

    by Jesús Gutiérrez, Sergio Martin, Victor H. Rodriguez, Sergio Albiol, Inmaculada Plaza, Carlos Medrano, Javier Martinez

    In an increasingly aging world, the effort to automate tasks associated with the care of elderly dependent individuals becomes more and more relevant if quality care provision at sustainable costs is desired. One of the tasks susceptible to automation in this field is the automatic detection of falls. The research effort undertaken to develop automatic fall detection systems has been quite substantial and has resulted in reliable fall detection systems. However, individuals who could benefit from these systems only consider their use in certain scenarios. Among them, a relevant scenario is the one associated to semi-supervised patients during the night who wake up and get out of bed, usually disoriented, feeling an urgent need to go to the toilet. Under these circumstances, usually, the person is not supervised, and a fall could go unnoticed until the next morning, delaying the arrival of urgently needed assistance. In this scenario, associated with nighttime rest, the patient prioritizes comfort, and in this situation, body-worn sensors typical of wearable systems are not a good option. Environmental systems, particularly visual-based ones with cameras deployed in the patient’s environment, could be the ideal option for this scenario. However, it is necessary to work with far-infrared (FIR) images in the low-light conditions of this environment. This work develops and implements, for the first time, a fall detection system that works with FIR imagery. The system integrates the output of a human pose estimation neural network with a detection methodology which uses the relative movement of the body’s most important joints in order to determine whether a fall has taken place. The pose estimation neural networks used represent the most relevant architectures in this field and have been trained using the first large public labeled FIR dataset. Thus, we have developed the first vision-based fall detection system working on FIR imagery able to operate in conditions of absolute darkness whose performance indexes are equivalent to the ones of equivalent systems working on conventional RGB images.


  • Open Access

    Creep and Hysteresis Compensation in Pressure-Sensitive Mats for Improving Center-of-Pressure Measurements

    by Javier Martínez-Cesteros, Carlos Medrano-Sánchez, Juli Án Castellanos-Ramos, José A. Sánchez-Durán, Inmaculada Plaza-García

    Large area tactile sensors are used to image the pressure exerted by human body parts. More specifically, they can be used to measure plantar pressure on human stability tests. The Center of Pressure trajectory is the primary outcome of such tests. Previous research has shown that the parameters obtained from the trajectory correlate with those obtained from a reference instrument, i.e. a force platform. However, there are still noticeable differences. In this work, a low cost prototype of a pressure sensitive mat has been built and compared with a force platform in stability tests. The sensitive material is Velostat, which is readily available. Such a mat could make objective stability tests more accessible. A model of two non-linear effects, hysteresis and creep, has been considered to compensate for them. Given that it was rather difficult to characterize the large mat with a pneumatic device, a small-sized sensor array was first characterized in a controlled environment. Then the model was extended to the large mat using a suitable scaling factor. The experimental results show that compensating for the non-linear effects led to a decrease in the differences between the two instruments, the force platform and the mat, with an average improvement of 26% in the distance between the trajectories.


  • Open Access

    An Optimization Approach to Eliminate Crosstalk in Zero-Potential Circuits for Reading Resistive Sensor Arrays

    by Sergio Domínguez-Gimeno, Carlos Medrano-Sánchez, Raúl Igual-Catalán, Javier Martínez-Cesteros, Inmaculada Plaza-García

    Crosstalk is a well-known problem in resistive sensor arrays (RSA). The zero potential method (ZPM) is a commonly used readout circuit that uses multiplexers and demultiplexers to reduce the main sources of crosstalk. However, the internal resistors of these switches cause a secondary crosstalk in the RSA that alters the RSA sensor values read. The solution to the effects of this secondary crosstalk is still a case of study. In previous literature, these resistances have been considered as known and, in most cases, equal for all switch channels. However, in a real situation, they are unknown and may vary between channels. In this work, a Least-Squares (LSQR) method is presented to obtain the true values of the switches from the read voltage signals. Calibration columns are added to the RSA for this purpose. To prove the performance of the method proposed, several simulations have been carried out with different values of RSA sensors, switch resistances, size of the RSA and noise level. Results show that the proposed LSQR method allows obtaining simultaneously accurate values for both the RSA sensors and switch internal resistors. In this way, the problem of secondary crosstalk is neutralized. It also shows better performance when compared with existing approaches.


  • Contribution to the design of wearable and environmental sensors for measuring respiration and vertical jumping

    by Erik Vanegas, Raul Igual, Inmaculada Plaza

    In the present work, a wearable system capable of monitoring breathing and an environmental system that measures the height of vertical jumps executed on it are developed. These systems were developed for use with elderly and frail adults, as auxiliary tools to monitor the health status of people. Both systems were subjected to validation protocols against commercial references widely used in the literature. In both cases, the results obtained with the proposed systems indicate that they are as reliable as commercial systems. Finally, the developed systems were published as open-source.

  • Impact of the tutoring program on engineering student dropout

    by Erik Vanegas, Yolocuauhtli Salazar, Pedro Lerma, Inmaculada Plaza

    Introduction: University student dropout is a problem that occurs in all countries of the world. It has been detected that the determining factors for dropout are external to the educational institution. However, tutoring is an educational strategy in which the teacher monitors the quality standards of the student to raise the terminal efficiency rates, lower the failure and dropout rates. Objective: The objective of this study is to evaluate the impact of the tutoring program on the dropout rates of students enrolled in the electronic engineering program. In this study, incoming students were followed up for a period of 4 years. A form was used to relate dropout rates to factors such as employment status, the student's school of origin, and career choice, among others. Results: Of the 122 students who attended Tutoring course, only 15 dropped out and this occurred mainly in the first 4 semesters. While of the students who did not come from technical school there were 50% who dropped out, also the factor with the lowest dropout is the students' place of origin (14%). Conclusions: The dropout students of the electronic engineering specialty abandon the career in the first three semesters and most of them come from non-technical high schools.