Hemanta Hazarika

Hemanta Hazarika

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Hemanta Hazarika has a total of 83 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Extraction efficiency and activity determinants of soybean urease for sustainable biomineralization technology

    by Yuyuan Chen, Hemanta Hazarika

    Sustainable biomineralization technologies rely on the efficient hydrolysis of urea, typically catalyzed by urease-producing microorganisms or purified enzymes. However, conventional approaches such as microbially induced calcium carbonate precipitation (MICP) and enzyme induced calcium carbonate precipitation (EICP) face limitations related to biosafety risks and high costs, respectively. In this study, soybean, an abundant and low-cost agricultural resource, was utilized to extract urease through a soaking and centrifugation process. A geometric modeling approach using tri-axial ellipsoid theory was introduced to explain how soybean grain size affects sieved powder yield. The effects of soybean grain size, powder concentration, temperature, pH, and storage conditions on the urease activity were systematically evaluated. Results showed that smaller soybean particle sizes resulted in lower extraction efficiency, whereas medium-grain soybeans provided the most cost-effective source due to their higher sieved powder yield and lower market price. Urease activity was positively correlated with both powder concentration and temperature within the tested range and reached its maximum at approximately pH 8. Additionally, storage at 4 °C significantly preserved the enzyme's initial activity over 72 h compared to room temperature conditions. These findings establish a practical foundation for the cost-effective production of plant-derived urease, promoting broader application of biomineralization techniques in sustainable geotechnical engineering.


  • Open Access

    Effect of Bio-Cementation Level and Rainfall Intensity on Surface Erosion Resistance of Biotreated Slope Using PEICP Method

    by Yuyuan Chen, Hemanta Hazarika, Nadella Marchelina

    Biomineralization technology is a promising method for soil cementation, enhancing its mechanical properties. However, its application in mitigating slope surface erosion caused by rainfall has not been fully explored. This study experimentally examined the feasibility of using plant-based enzyme-induced carbonate precipitation (PEICP) to reduce slope surface rainfall erosion through simulated rainfall tests. The effects of biotreatment cycles (N) and rainfall intensity (Ri) on erosion resistance were evaluated. The results demonstrated that increasing the biotreatment cycles improved the bio-cementation level, as evidenced by enhanced surface strength, increased calcium carbonate content (CCC) and thicker crust layers. Specifically, as the biotreatment cycles (N) increased from 2 to 6, the crust layer thickness expanded from 5.2 mm to 15.7 mm, with surface strength rising from 38.3 kPa to 244.3 kPa. Likewise, the CCC increased significantly from 1.09% to 5.32%, further reinforcing the soil structure and enhancing erosion resistance. Slopes treated with six biotreatment cycles exhibited optimal erosion resistance across rainfall intensities ranging from 45 to 100 mm/h. Compared to untreated slopes, biotreated slopes showed significant reductions in soil loss, with a decrease to below 10% at N = 4 and near-complete erosion resistance at N = 6. These findings highlight the potential of PEICP technology for improving slope stability under rainfall conditions.


  • Open Access

    Calibration and Performance Evaluation of Cost-Effective Capacitive Moisture Sensor in Slope Model Experiments

    by Muhammad Nurjati Hidayat, Hemanta Hazarika, Haruichi Kanaya

    Understanding the factors that contribute to slope failures, such as soil saturation, is essential for mitigating rainfall-induced landslides. Cost-effective capacitive soil moisture sensors have the potential to be widely implemented across multiple sites for landslide early warning systems. However, these sensors need to be calibrated for specific applications to ensure high accuracy in readings. In this study, a soil-specific calibration was performed in a laboratory setting to integrate the soil moisture sensor with an automatic monitoring system using the Internet of Things (IoT). This research aims to evaluate a low-cost soil moisture sensor (SKU:SEN0193) and develop calibration equations for the purpose of slope model experiment under artificial rainfall condition using silica sand. The results indicate that a polynomial function is the best fit, with a coefficient of determination (R2) ranging from 0.918 to 0.983 and a root mean square error (RMSE) ranging from 1.171 to 2.488. The calibration equation was validated through slope model experiments, with soil samples taken from the models after the experiment finished. Overall, the moisture content readings from the sensors showed approximately a 12% deviation from the actual moisture content. The findings suggest that the cost-effective capacitive soil moisture sensor has the potential to be used for the development of landslide early warning system.


  • Development and Evaluation of Landslide Early Warning System for Mitigating Rainfall Induced Disasters

    by Muhammad Nurjati Hidayat, Hemanta Hazarika, Masanori Murai, Haruichi Kanaya, Yasuhide Fukumoto


  • Open Access

    Sustainable mitigation method for earthquake-induced liquefaction using gravel-tire chips mixture: an integrated approach

    by Yutao Hu, Hemanta Hazarika, Gopal Santana Phani Madabhushi, Stuart Kenneth Haigh

    This study investigates the potential of using Gravel-Tire Chips Mixture (GTCM) drains to mitigate soil liquefaction during earthquakes through an integrated experimental and numerical approach. The experiments involved a controlled setup with three distinct scenarios, evaluating the effectiveness of GTCM drain configurations in controlling excess pore water pressure in foundation soils, thereby reducing liquefaction and building settlement under seismic loading. Numerical simulations were performed to complement the physical tests and provide deeper insights into soil-drain interactions during dynamic events. The experimental results showed that GTCM drains significantly reduced settlement, with a reduction of up to 40 times in cases where GTCM drains were used compared to unmitigated conditions. Additionally, the presence of GTCM drains was effective in dissipating excess pore water pressure, which is a primary cause of liquefaction. Numerical simulations confirmed the experimental findings, indicating minimal pore water pressure buildup and reduced deformation in soils reinforced with GTCM drains. This research demonstrates that GTCM drains provide a sustainable and effective method to mitigate liquefaction and reduce earthquake-induced structural damage. The findings emphasize the importance of strategic drain placement and highlight the environmental benefits of repurposing waste materials such as tires for geotechnical applications, offering a cost-effective solution for enhancing infrastructure resilience in earthquake-prone regions.


  • Open Access

    Calibration and Performance Evaluation of Cost-effective Capacitive Moisture Sensor in a Slope Model Experiments

    by Muhammad Hidayat, Hemanta Hazarika, Haruichi Kanaya

    Understanding the factors that contribute to slope failures, such as soil saturation, is essential for mitigating rainfall-induced landslides. Cost-effective capacitive soil moisture sensors have the po-tential to be widely implemented across multiple sites for landslide early warning systems. How-ever, these sensors need to be calibrated for specific applications to ensure high accuracy in readings. In this study, a soil-specific calibration was performed in a laboratory setting to integrate the soil moisture sensor with an automatic monitoring system using the Internet of Things (IoT). This re-search aims to evaluate a low-cost soil moisture sensor (SKU:SEN0193) and develop calibration equations for the purpose of slope model experiment under artificial rainfall condition using silica sand. The results indicate that a polynomial function is the best fit, with a coefficient of determi-nation (R²) ranging from 0.92 to 0.98 and a root mean square error (RMSE) ranging from 1.17 to 2.67. The calibration equation was validated through slope model experiments, with soil samples taken from the model after the experiment finished. Overall, the moisture content readings from the sensors showed approximately a 10% deviation from the actual moisture content. The findings suggest that the cost-effective capacitive soil moisture sensors has the potential to be used for the development of landslide early warning system.