Sylvain Barraud
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Sylvain Barraud has a total of 250 co-authors. Here are the top co-authors by number of shared publications:
- Marcelo Antonio Pavanello
Department of Electrical Engineering, Centro Universitrio FEI, So Bernardo do Campo, Brazil
12 shared publications Maud Vinet
CEA-Leti, Universit Grenoble Alpes, MINATEC Campus, Grenoble, France
10 shared publications- Mikaël Cassé
CEA-LETI, Universite Grenoble Alpes
10 shared publications - Gerard Ghibaudo
Grenoble INP-Minatec, CROMA, Parvis Louis Neel, 38000 Grenoble (France), Grenoble Institute of Technology, Grenoble, France, France
9 shared publications M. Vinet
Universit Grenoble Alpes, CEA, LETI, Grenoble, France
9 shared publicationsGerard Ghibaudo
IMEP-LAHC Laboratory in Minatec, Parvis Louis Néel, 38016 Grenoble Cedex 16, France
7 shared publications
Latest Publications
- 28 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72 (7) , 3903-3906
Back-Gate Bias-Controllable Subthreshold Slope of Junctionless Transistors
Junctionless transistors (JLTs) are one of the next-generation logic transistors for sub-3-nm technology nodes with several advantages, including very simple structure, no p-n junctions at source and drain, and bulk conduction-based operation. In this work, back-gate voltage (Vgb) influenced subthreshold conduction mechanism of JLTs was investigated in detail. The subthreshold swing (SS) in JLTs was clearly improved with applying a negative Vgb, since the effective channel thickness of JLT was controlled by Vgb. The experimental results were verified by analytical model equations and numerical simulation. Those results provide a key information for developing low-power and energy-efficient applications with JLTs.
- 28 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72 (7) , 3903-3906
Back-Gate Bias-Controllable Subthreshold Slope of Junctionless Transistors
Junctionless transistors (JLTs) are one of the next-generation logic transistors for sub-3-nm technology nodes with several advantages, including very simple structure, no p-n junctions at source and drain, and bulk conduction-based operation. In this work, back-gate voltage (Vgb) influenced subthreshold conduction mechanism of JLTs was investigated in detail. The subthreshold swing (SS) in JLTs was clearly improved with applying a negative Vgb, since the effective channel thickness of JLT was controlled by Vgb. The experimental results were verified by analytical model equations and numerical simulation. Those results provide a key information for developing low-power and energy-efficient applications with JLTs.
- Open Access
- 5 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 12, 682-691
Comprehensive Evaluation of Junctionless and Inversion-Mode Nanowire MOSFETs Performance at High Temperatures
This work aims to perform a comprehensive comparison of the electrical properties of junctionless and inversion-mode nanowires MOSFETS, fabricated with similar gate stack and state-of-art process, in the temperature range from 300 K to 580 K. The comparative analysis is performed through the main electrical parameters of the devices, such as the threshold voltage, subthreshold current and slope, DIBL, conduction current, mobility, and maximum transconductance extracted from experimental data. Devices with different fin widths are compared. It is demonstrated that the inversion-mode nanowire transistors present higher performance with three times higher maximum transconductance and conduction current and twice higher low field mobility than the junctionless’ with a fin width of 10 nm at a fixed temperature. On the other hand, the junctionless nanowire transistors presented higher thermal stability of their electrical parameters with a 75% lower variation of maximum transconductance with temperature, 77% lower maximum transconductance variation with temperature, and 22% lower temperature coefficient of mobility.
- 5 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 12, 682-691
Open AccessComprehensive Evaluation of Junctionless and Inversion-Mode Nanowire MOSFETs Performance at High Temperatures
This work aims to perform a comprehensive comparison of the electrical properties of junctionless and inversion-mode nanowires MOSFETS, fabricated with similar gate stack and state-of-art process, in the temperature range from 300 K to 580 K. The comparative analysis is performed through the main electrical parameters of the devices, such as the threshold voltage, subthreshold current and slope, DIBL, conduction current, mobility, and maximum transconductance extracted from experimental data. Devices with different fin widths are compared. It is demonstrated that the inversion-mode nanowire transistors present higher performance with three times higher maximum transconductance and conduction current and twice higher low field mobility than the junctionless’ with a fin width of 10 nm at a fixed temperature. On the other hand, the junctionless nanowire transistors presented higher thermal stability of their electrical parameters with a 75% lower variation of maximum transconductance with temperature, 77% lower maximum transconductance variation with temperature, and 22% lower temperature coefficient of mobility.
- Open Access
- 27 September 2023
- Published by MDPI AG in Biosensors
- Vol. 13 (10) , 908
pH Quantification in Human Dermal Interstitial Fluid Using Ultra-Thin SOI Silicon Nanowire ISFETs and a High-Sensitivity Constant-Current Approach
In this paper, we propose a novel approach to utilize silicon nanowires as high-sensitivity pH sensors. Our approach works based on fixing the current bias of silicon nanowires Ion Sensitive Field Effect Transistors (ISFETs) and monitor the resulting drain voltage as the sensing signal. By fine tuning the injected current levels, we can optimize the sensing conditions according to different sensor requirements. This method proves to be highly suitable for real-time and continuous measurements of biomarkers in human biofluids. To validate our approach, we conducted experiments, with real human sera samples to simulate the composition of human interstitial fluid (ISF), using both the conventional top-gate approach and the optimized constant current method. We successfully demonstrated pH sensing within the physiopathological range of 6.5 to 8, achieving an exceptional level of accuracy in this complex matrix. Specifically, we obtained a maximum error as low as 0.92% (equivalent to 0.07 pH unit) using the constant-current method at the optimal current levels (1.71% for top-gate). Moreover, by utilizing different pools of human sera with varying total protein content, we demonstrated that the protein content among patients does not impact the sensors’ performance in pH sensing. Furthermore, we tested real-human ISF samples collected from volunteers. The obtained accuracy in this scenario was also outstanding, with an error as low as 0.015 pH unit using the constant-current method and 0.178 pH unit in traditional top-gate configuration.
- 27 September 2023
- Published by MDPI AG in Biosensors
- Vol. 13 (10) , 908
Open AccesspH Quantification in Human Dermal Interstitial Fluid Using Ultra-Thin SOI Silicon Nanowire ISFETs and a High-Sensitivity Constant-Current Approach
In this paper, we propose a novel approach to utilize silicon nanowires as high-sensitivity pH sensors. Our approach works based on fixing the current bias of silicon nanowires Ion Sensitive Field Effect Transistors (ISFETs) and monitor the resulting drain voltage as the sensing signal. By fine tuning the injected current levels, we can optimize the sensing conditions according to different sensor requirements. This method proves to be highly suitable for real-time and continuous measurements of biomarkers in human biofluids. To validate our approach, we conducted experiments, with real human sera samples to simulate the composition of human interstitial fluid (ISF), using both the conventional top-gate approach and the optimized constant current method. We successfully demonstrated pH sensing within the physiopathological range of 6.5 to 8, achieving an exceptional level of accuracy in this complex matrix. Specifically, we obtained a maximum error as low as 0.92% (equivalent to 0.07 pH unit) using the constant-current method at the optimal current levels (1.71% for top-gate). Moreover, by utilizing different pools of human sera with varying total protein content, we demonstrated that the protein content among patients does not impact the sensors’ performance in pH sensing. Furthermore, we tested real-human ISF samples collected from volunteers. The obtained accuracy in this scenario was also outstanding, with an error as low as 0.015 pH unit using the constant-current method and 0.178 pH unit in traditional top-gate configuration.
- 28 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Electrical Characterization of Ω-Gate Nanowire MOSFETs Down to Cryogenic Temperatures
This work presents the electrical characterization of Ω-gate SOI nanowire MOSFETs in the temperature range from 82 K to 330 K. Devices with different fin widths and channel lengths are compared. The comparison is performed using experimental data looking for some of the fundamental electrical parameters such as threshold voltage, inverse subthreshold slope, and carrier mobility over the temperature. For short-channel devices with L=40 nm an analysis of the mobility degradation coefficients over the temperature is performed.
- 28 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Electrical Characterization of Ω-Gate Nanowire MOSFETs Down to Cryogenic Temperatures
This work presents the electrical characterization of Ω-gate SOI nanowire MOSFETs in the temperature range from 82 K to 330 K. Devices with different fin widths and channel lengths are compared. The comparison is performed using experimental data looking for some of the fundamental electrical parameters such as threshold voltage, inverse subthreshold slope, and carrier mobility over the temperature. For short-channel devices with L=40 nm an analysis of the mobility degradation coefficients over the temperature is performed.
- Open Access
- 14 August 2023
- Published by MDPI AG in Preprints.org
pH Quantification in Human Dermal Interstitial Fluid Using Ultra-Thin SOI Silicon Nanowire ISFETs and a High-Sensitivity Constant-Current Approach
In this paper, we propose a novel approach to utilize silicon nanowires as high-sensitivity pH sensors. Our approach works based on fixing the current bias of silicon nanowires Ion Sensitive Field Effect Transistors (ISFETs) and monitor the resulting drain voltage as the sensing signal. By fine tuning the injected current levels, we can optimize the sensing conditions according to different sensor requirements. This method proves to be highly suitable for real-time and continuous measurements of biomarkers in human biofluids. To validate our approach, we conducted experiments, with real human sera samples to simulate the composition of human interstitial fluid (ISF), using both the conventional top-gate approach and the optimized constant current method . We successfully demonstrated pH sensing within the physiopathological range of 6.5 to 8, achieving an exceptional level of accuracy in this complex matrix. Specifically, we obtained a maximum error as low as 0.92\% (equivalent to 0.07 pH unit) using the constant-current method at the optimal current levels (1.71\% for top-gate). Moreover, by utilizing different pools of human sera with varying total protein content, we demonstrated that the protein content among patients does not impact the sensors' performance in pH sensing. Furthermore, we tested real-human ISF samples collected from volunteers. The obtained accuracy in this scenario was also outstanding, with an error as low as 0.015 pH unit using the constant-current method and 0.178 pH unit in traditional top-gate configuration.
- 14 August 2023
- Published by MDPI AG in Preprints.org
Open AccesspH Quantification in Human Dermal Interstitial Fluid Using Ultra-Thin SOI Silicon Nanowire ISFETs and a High-Sensitivity Constant-Current Approach
In this paper, we propose a novel approach to utilize silicon nanowires as high-sensitivity pH sensors. Our approach works based on fixing the current bias of silicon nanowires Ion Sensitive Field Effect Transistors (ISFETs) and monitor the resulting drain voltage as the sensing signal. By fine tuning the injected current levels, we can optimize the sensing conditions according to different sensor requirements. This method proves to be highly suitable for real-time and continuous measurements of biomarkers in human biofluids. To validate our approach, we conducted experiments, with real human sera samples to simulate the composition of human interstitial fluid (ISF), using both the conventional top-gate approach and the optimized constant current method . We successfully demonstrated pH sensing within the physiopathological range of 6.5 to 8, achieving an exceptional level of accuracy in this complex matrix. Specifically, we obtained a maximum error as low as 0.92\% (equivalent to 0.07 pH unit) using the constant-current method at the optimal current levels (1.71\% for top-gate). Moreover, by utilizing different pools of human sera with varying total protein content, we demonstrated that the protein content among patients does not impact the sensors' performance in pH sensing. Furthermore, we tested real-human ISF samples collected from volunteers. The obtained accuracy in this scenario was also outstanding, with an error as low as 0.015 pH unit using the constant-current method and 0.178 pH unit in traditional top-gate configuration.
- 5 August 2023
- Published by Elsevier in Solid-State Electronics
- Vol. 208
Impact of series resistance on the drain current variability in inversion mode and junctionless nanowire transistors
- 5 August 2023
- Published by Elsevier in Solid-State Electronics
- Vol. 208
Impact of series resistance on the drain current variability in inversion mode and junctionless nanowire transistors
- Open Access
- 5 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 11, 672-680
High Temperature and Width Influence on the GIDL of Nanowire and Nanosheet SOI nMOSFETs
In this work, an experimental evaluation of Gate-Induce Drain Leakage (GIDL) current is presented for nanowire and nanosheet-based SOI transistors. The effects of fin width and temperature increase are studied. Obtained results indicate that the increase in device width makes the GIDL current more sensitive to temperature increase. Three-dimensional numerical simulations have shown that despite the reverse junction leakage increase with temperature, leakage current in nanosheet and nanowire transistors is composed predominantly of GIDL current. The change in valence and conduction bands caused by temperature increase favors the band-to-band tunneling, which is responsible for the worsening of GIDL at high temperatures.
- 5 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 11, 672-680
Open AccessHigh Temperature and Width Influence on the GIDL of Nanowire and Nanosheet SOI nMOSFETs
In this work, an experimental evaluation of Gate-Induce Drain Leakage (GIDL) current is presented for nanowire and nanosheet-based SOI transistors. The effects of fin width and temperature increase are studied. Obtained results indicate that the increase in device width makes the GIDL current more sensitive to temperature increase. Three-dimensional numerical simulations have shown that despite the reverse junction leakage increase with temperature, leakage current in nanosheet and nanowire transistors is composed predominantly of GIDL current. The change in valence and conduction bands caused by temperature increase favors the band-to-band tunneling, which is responsible for the worsening of GIDL at high temperatures.
- 10 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 69 (8) , 4730-4736
Variability Modeling in Triple-Gate Junctionless Nanowire Transistors
This work aims at proposing an analytical model for the variability of the threshold voltage and drain current in junctionless nanowire transistors. The model is continuous in all operation regions and has been validated through Monte Carlo simulations using a physically based drain current model and 3-D numerical simulations. A discussion about the influences of each variability source based on the proposed model is carried out. Finally, the modeled results are compared to the experimental data for a fully physical validation.
- 10 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 69 (8) , 4730-4736
Variability Modeling in Triple-Gate Junctionless Nanowire Transistors
This work aims at proposing an analytical model for the variability of the threshold voltage and drain current in junctionless nanowire transistors. The model is continuous in all operation regions and has been validated through Monte Carlo simulations using a physically based drain current model and 3-D numerical simulations. A discussion about the influences of each variability source based on the proposed model is carried out. Finally, the modeled results are compared to the experimental data for a fully physical validation.
- 6 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 69 (7) , 4022-4028
Experimental Demonstration of Ω-Gate SOI Nanowire MOS Transistors’ Mobility Variation Induced by Substrate Bias
This work investigates the carrier mobility variation in$\Omega $ -gate silicon-on-insulator (SOI) nanowire MOS transistors induced by substrate (or back) biasing. The analysis is carried out through experimental measurements and 3-D TCAD simulation, performed in n-type devices with variable fin width. Mobility enhancement is observed for lower back bias levels, due to the initial conduction through the Si–BOX interface, which presents higher mobility, prior to the activation of the front channel. As back bias is increased, however, the strong substrate-induced electric field in the back channel (BC) is responsible for worsening scattering mechanisms in the BC, such as surface roughness and acoustic phonon scattering, inducing mobility degradation. The effect is amplified as the fin width increases. For short-channel devices, the use of back bias was more beneficial for mobility due to a stronger mobility enhancement and lower mobility degradation.- 6 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 69 (7) , 4022-4028
Experimental Demonstration of Ω-Gate SOI Nanowire MOS Transistors’ Mobility Variation Induced by Substrate Bias
This work investigates the carrier mobility variation in$\Omega $ -gate silicon-on-insulator (SOI) nanowire MOS transistors induced by substrate (or back) biasing. The analysis is carried out through experimental measurements and 3-D TCAD simulation, performed in n-type devices with variable fin width. Mobility enhancement is observed for lower back bias levels, due to the initial conduction through the Si–BOX interface, which presents higher mobility, prior to the activation of the front channel. As back bias is increased, however, the strong substrate-induced electric field in the back channel (BC) is responsible for worsening scattering mechanisms in the BC, such as surface roughness and acoustic phonon scattering, inducing mobility degradation. The effect is amplified as the fin width increases. For short-channel devices, the use of back bias was more beneficial for mobility due to a stronger mobility enhancement and lower mobility degradation.- 12 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 69 (6) , 3037-3041
Channel-Width-Dependent Mobility Degradation in Bulk Conduction Regime of Tri-Gate Junctionless Transistors
Junctionless transistors (JLTs) have promising strengths such as extremely simple structures without p-n junctions, better reliability, and low flicker noise, for overcoming scaling challenges for advanced sub-5-nm nodes. In this article, channel-width-dependent operation in the partially depleted regime of tri-gate JLTs was investigated in comparison to conduction in conventional inversion-mode (IM) transistors. A large difference in transconductance ( ${g} _{m}$ ) against gate-to-channel capacitance ( ${C} _{gc}$ ) and the reduced amplitude of the first peak on $dg_{m}$ / $dV_{g}$ were identified under the partially depleted regime in JLTs, due to a severe transverse ${E}$ -field near-threshold voltage ( ${V} _{th}$ ). However, the impact of ${E}$ -field was weakened as decreasing channel width of JLTs. These works provide key information for a better understanding of the channel-width-dependent performance of JLTs and for implementing practical applications with them.
- 12 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 69 (6) , 3037-3041
Channel-Width-Dependent Mobility Degradation in Bulk Conduction Regime of Tri-Gate Junctionless Transistors
Junctionless transistors (JLTs) have promising strengths such as extremely simple structures without p-n junctions, better reliability, and low flicker noise, for overcoming scaling challenges for advanced sub-5-nm nodes. In this article, channel-width-dependent operation in the partially depleted regime of tri-gate JLTs was investigated in comparison to conduction in conventional inversion-mode (IM) transistors. A large difference in transconductance ( ${g} _{m}$ ) against gate-to-channel capacitance ( ${C} _{gc}$ ) and the reduced amplitude of the first peak on $dg_{m}$ / $dV_{g}$ were identified under the partially depleted regime in JLTs, due to a severe transverse ${E}$ -field near-threshold voltage ( ${V} _{th}$ ). However, the impact of ${E}$ -field was weakened as decreasing channel width of JLTs. These works provide key information for a better understanding of the channel-width-dependent performance of JLTs and for implementing practical applications with them.