Nimet Ünlü
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Nimet Ünlü has a total of 98 co-authors. Here are the top co-authors by number of shared publications:
- Mehmet Semih Velioğlu
Faculty of Dentistry, Department of Restorative Dentistry, Selcuk University, Konya, Türkiye
7 shared publications - Sinem Özdemir
Department of Restorative Dentistry, Faculty of Dentistry, Selcuk University, Konya, Turkiye
7 shared publications - Sultan Gizem Ülkü
Selçuk Üniversitesi Diş Hekimliği Fakültesi
6 shared publications - Abdulkadir Sengun
Department of Conservative Dentistry, Faculty of Dentistry, Selçuk University, Konya, Turkey
5 shared publications - Merve Gürses
Selçuk Üniversitesi Diş Hekimliği Fakültesi
5 shared publications F. Özer
4 shared publications
Latest Publications
- 30 September 2026
- Published by Cumhuriyet University in Cumhuriyet Dental Journal
- Vol. 29 (3) , 419-432
Effects of Polishing Systems on Thermocycled and Coffee-Immersed Composite Resins
Objectives: Aging alters composite resin properties such as roughness, color stability, and microhardness, while polishing systems determine clinical performance and longevity. This study evaluated the effects of aging on surface properties of five composite resins polished with four different polishing systems. Materials and Methods: Surface roughness, color, and microhardness were assessed at different stages (control, after polishing, and after aging). Surface topography was analyzed by Atomic Force Microscopy (AFM) and Scanning Electron Microscopy (SEM) before (control) and after aging. The samples were subjected to thermal cycling (10,000 cycles between 5-55°C) and immersion in coffee solution. Results: Aging significantly increased roughness and color change while reducing microhardness across all groups. OneGloss produced the highest roughness values, whereas multi-step polishing systems (Zenit Flex, Clearfil TwistDia, Nova Twist) achieved superior surface quality. Clearfil Majesty ES-2 consistently showed higher roughness due to its composition. Clinically unacceptable color shifts occurred after aging, particularly in Filtek Ultimate Universal. Zenit Flex improved microhardness in Palfique Estelite Paste and Filtek Ultimate Universal, while Clearfil TwistDia reduced roughness in Clearfil Majesty ES-2. Conclusions: Aging negatively affected all surface properties of composite resins. Multi-step polishing systems demonstrated better clinical performance compared to single-step systems. The selection of polishing systems should be based on the specific composite resin type to achieve optimal long-term clinical outcomes.
- 30 September 2026
- Published by Cumhuriyet University in Cumhuriyet Dental Journal
- Vol. 29 (3) , 419-432
Effects of Polishing Systems on Thermocycled and Coffee-Immersed Composite Resins
Objectives: Aging alters composite resin properties such as roughness, color stability, and microhardness, while polishing systems determine clinical performance and longevity. This study evaluated the effects of aging on surface properties of five composite resins polished with four different polishing systems. Materials and Methods: Surface roughness, color, and microhardness were assessed at different stages (control, after polishing, and after aging). Surface topography was analyzed by Atomic Force Microscopy (AFM) and Scanning Electron Microscopy (SEM) before (control) and after aging. The samples were subjected to thermal cycling (10,000 cycles between 5-55°C) and immersion in coffee solution. Results: Aging significantly increased roughness and color change while reducing microhardness across all groups. OneGloss produced the highest roughness values, whereas multi-step polishing systems (Zenit Flex, Clearfil TwistDia, Nova Twist) achieved superior surface quality. Clearfil Majesty ES-2 consistently showed higher roughness due to its composition. Clinically unacceptable color shifts occurred after aging, particularly in Filtek Ultimate Universal. Zenit Flex improved microhardness in Palfique Estelite Paste and Filtek Ultimate Universal, while Clearfil TwistDia reduced roughness in Clearfil Majesty ES-2. Conclusions: Aging negatively affected all surface properties of composite resins. Multi-step polishing systems demonstrated better clinical performance compared to single-step systems. The selection of polishing systems should be based on the specific composite resin type to achieve optimal long-term clinical outcomes.
- Open Access
- 24 August 2026
- Published by Selcuk Dental Journal in Selcuk Dental Journal
- Vol. 13 (2) , 240-246
Opinions of Intern Dentists and Practicing Dentists on Integrated (Multidisciplinary) Clinical Education
Background: Integrated (multidisciplinary) clinical education is gaining increasing importance in dental curricula as an approach aimed at developing comprehensive treatment planning and clinical competence. This study aims to evaluate the views of dental students, graduate dentists, and faculty members regarding integrated clinical education and to shed light on future curriculum arrangements.Methods: A 13-question survey was prepared in Google Forms and distributed to fourth- and fifth-year dental students, licensed dentists, and faculty members nationwide. A total of 178 participants from eleven different dental faculties responded to the survey. The survey consisted of multiple-choice and 5-point Likert scale questions covering educational value, structure, duration, assessment methods, and open-ended feedback. The data were analyzed using descriptive statistical methods.Results: The vast majority of participants found integrated clinical training to be necessary and beneficial. Endodontics, restorative dentistry, prosthetic dentistry, and periodontology were identified as the most fundamental disciplines to include in integrated clinical training. Participants preferred a structured but time-limited model (half a term or annual practice in the final year). A multidimensional, points-based assessment system was deemed more appropriate than threshold-based systems based on patient or procedure counts. Open-ended responses emphasized the importance of quality and case complexity over quantity and highlighted concerns about stress, workload, and organizational issues.Conclusions: Students and graduates widely support integrated clinical education as a valuable educational model that promotes holistic treatment planning and multidisciplinary coordination. However, to maximize educational effectiveness, assessment systems, organizational structure, and student-centered practices need to be developed.Keywords: integrated clinical training, multidisciplinary dentistry, dental curriculum
- 24 August 2026
- Published by Selcuk Dental Journal in Selcuk Dental Journal
- Vol. 13 (2) , 240-246
Open AccessOpinions of Intern Dentists and Practicing Dentists on Integrated (Multidisciplinary) Clinical Education
Background: Integrated (multidisciplinary) clinical education is gaining increasing importance in dental curricula as an approach aimed at developing comprehensive treatment planning and clinical competence. This study aims to evaluate the views of dental students, graduate dentists, and faculty members regarding integrated clinical education and to shed light on future curriculum arrangements.Methods: A 13-question survey was prepared in Google Forms and distributed to fourth- and fifth-year dental students, licensed dentists, and faculty members nationwide. A total of 178 participants from eleven different dental faculties responded to the survey. The survey consisted of multiple-choice and 5-point Likert scale questions covering educational value, structure, duration, assessment methods, and open-ended feedback. The data were analyzed using descriptive statistical methods.Results: The vast majority of participants found integrated clinical training to be necessary and beneficial. Endodontics, restorative dentistry, prosthetic dentistry, and periodontology were identified as the most fundamental disciplines to include in integrated clinical training. Participants preferred a structured but time-limited model (half a term or annual practice in the final year). A multidimensional, points-based assessment system was deemed more appropriate than threshold-based systems based on patient or procedure counts. Open-ended responses emphasized the importance of quality and case complexity over quantity and highlighted concerns about stress, workload, and organizational issues.Conclusions: Students and graduates widely support integrated clinical education as a valuable educational model that promotes holistic treatment planning and multidisciplinary coordination. However, to maximize educational effectiveness, assessment systems, organizational structure, and student-centered practices need to be developed.Keywords: integrated clinical training, multidisciplinary dentistry, dental curriculum
- 15 May 2026
- Published by Elsevier in The Journal of the American Dental Association
- Vol. 157 (10) , 1174-1186.e1
Comprehensive oral health profiling in rheumatoid arthritis
- 15 May 2026
- Published by Elsevier in The Journal of the American Dental Association
- Vol. 157 (10) , 1174-1186.e1
Comprehensive oral health profiling in rheumatoid arthritis
- 27 April 2026
- Published by Selcuk Dental Journal in Selcuk Dental Journal
- Vol. 13 (1) , 129-133
The Effect of Adhesive Procedures on the Repair Bond Strength of Aged Universal Composites
Background: The purpose of this study is to evaluate the repair bond strength of aged universal composites after surface treatment and different adhesive applications.Methods: Three universal composites (GC Achord, Filtek Ultimate, Clearfil Majesty) were used to prepare 315 specimens (n=105 per composite). Seven groups were created: a negative control (NC) (only polished), a positive control (PC) (bur–roughened-only) and five experimental groups in which roughened surfaces were treated with G2-Bond Universal (G2), Prime&Bond Universal (PB), Clearfil SE Bond (SE), the hydrophobic bond of G2 (G2B), the hydrophobic bond of SE (SEB). Repair restorations were completed using Nova Compo HS. Shear bond strength was measured at a crosshead speed of 1 mm/min, and values were recorded in MPa. Fracture modes were classified as adhesive, cohesive, or mixed. Data were analyzed using the Kruskal–Wallis test (p
- 27 April 2026
- Published by Selcuk Dental Journal in Selcuk Dental Journal
- Vol. 13 (1) , 129-133
The Effect of Adhesive Procedures on the Repair Bond Strength of Aged Universal Composites
Background: The purpose of this study is to evaluate the repair bond strength of aged universal composites after surface treatment and different adhesive applications.Methods: Three universal composites (GC Achord, Filtek Ultimate, Clearfil Majesty) were used to prepare 315 specimens (n=105 per composite). Seven groups were created: a negative control (NC) (only polished), a positive control (PC) (bur–roughened-only) and five experimental groups in which roughened surfaces were treated with G2-Bond Universal (G2), Prime&Bond Universal (PB), Clearfil SE Bond (SE), the hydrophobic bond of G2 (G2B), the hydrophobic bond of SE (SEB). Repair restorations were completed using Nova Compo HS. Shear bond strength was measured at a crosshead speed of 1 mm/min, and values were recorded in MPa. Fracture modes were classified as adhesive, cohesive, or mixed. Data were analyzed using the Kruskal–Wallis test (p
- Open Access
- 24 April 2026
- Published by Springer Nature in BMC Oral Health
- Vol. 26 (1)
Short-term clinical success of posterior amalgam and composite restorations in public dental care: a multicenter retrospective study
This study evaluated the short-term clinical success of posterior amalgam (PAR) and composite resin restorations (PCRR) and compared their retention period
- 24 April 2026
- Published by Springer Nature in BMC Oral Health
- Vol. 26 (1)
Open AccessShort-term clinical success of posterior amalgam and composite restorations in public dental care: a multicenter retrospective study
This study evaluated the short-term clinical success of posterior amalgam (PAR) and composite resin restorations (PCRR) and compared their retention period
- Open Access
- 29 December 2025
- Published by Selcuk Dental Journal in Selcuk Dental Journal
- Vol. 12 (3) , 447-456
Curriculum-Based Competency in Dentistry Before, During, and After COVID-19
Background: The COVID-19 pandemic caused fundamental changes in dental education, with practical clinical training being significantly disrupted. This study aimed to comparatively evaluate the clinical skill competencies of dental students from pre-pandemic, pandemic, and post-pandemic periods according to Türkiye's National Core Dental Education Program (DUÇEP) standards. Methods: In this cross-sectional study, 246 individuals (144 women, 102 men) divided into four groups based on graduation time were evaluated: pre-pandemic (graduates of 2019 and earlier, n=48), pandemic (2020-2022 graduates, n=43), Y5-23 (2023 fifth-year students, n=62), and Y5-24 (2024 fifth-year students, n=93). A 32-question survey was administered using a DUÇEP-approved four-level performance scale. Jonckheere-Terpstra test and Bonferroni-corrected pairwise comparisons were used for inter-group comparisons. Results: The pandemic group demonstrated lower competency than other groups in various clinical procedures. Significant differences were found particularly in sialometry, emergency triage, endodontic procedures (rotary canal shaping, retreatment, rubber dam application), pediatric dentistry (vital pulpotomy, stainless steel crown), and dental trauma management (p
- 29 December 2025
- Published by Selcuk Dental Journal in Selcuk Dental Journal
- Vol. 12 (3) , 447-456
Open AccessCurriculum-Based Competency in Dentistry Before, During, and After COVID-19
Background: The COVID-19 pandemic caused fundamental changes in dental education, with practical clinical training being significantly disrupted. This study aimed to comparatively evaluate the clinical skill competencies of dental students from pre-pandemic, pandemic, and post-pandemic periods according to Türkiye's National Core Dental Education Program (DUÇEP) standards. Methods: In this cross-sectional study, 246 individuals (144 women, 102 men) divided into four groups based on graduation time were evaluated: pre-pandemic (graduates of 2019 and earlier, n=48), pandemic (2020-2022 graduates, n=43), Y5-23 (2023 fifth-year students, n=62), and Y5-24 (2024 fifth-year students, n=93). A 32-question survey was administered using a DUÇEP-approved four-level performance scale. Jonckheere-Terpstra test and Bonferroni-corrected pairwise comparisons were used for inter-group comparisons. Results: The pandemic group demonstrated lower competency than other groups in various clinical procedures. Significant differences were found particularly in sialometry, emergency triage, endodontic procedures (rotary canal shaping, retreatment, rubber dam application), pediatric dentistry (vital pulpotomy, stainless steel crown), and dental trauma management (p
- Open Access
- 19 September 2025
- Published by Selcuk Dental Journal in Selcuk Dental Journal
- Vol. 12 (4) , 35-41
Are Future Dentists Ready for Aesthetics?
Aim: This study aimed to evaluate the knowledge, experience, awareness, and motivation of 4th- and 5th-year dental students regarding anterior aesthetic restorations. Methods: This study was approved by the Selçuk University Faculty of Dentistry Non-Interventional Clinical Research Ethics Committee. In this study, a Google Form survey consisting of a total of 31 questions was prepared. Invitations were sent to 4th and 5th-year students from 9 different dentistry faculties via e-mail and social media. A total of 240 participants from all faculties responded to the survey study. The personal information of the participants was not recorded, and the data were analyzed anonymously. Kruskal-Wallis, Mann-Whitney U and T tests were used for statistical analysis of the survey results (p0.05). A T-test was conducted to analyze the difference in competency levels between 4th and 5th-year dental students. According to the test results, no statistically significant difference was observed between the competency levels of 4th and 5th-year students (p>0.05). Conclusion: This study reveals that 4th- and 5th-year dental students feel inadequately prepared for anterior aesthetic restorations and seek more opportunities for practical training. Expanding this preliminary study with more extensive participation and collaboration across other dental faculties is recommended. Keywords: Smile design, undergraduate education in dentistry, anterior restoration
- 19 September 2025
- Published by Selcuk Dental Journal in Selcuk Dental Journal
- Vol. 12 (4) , 35-41
Open AccessAre Future Dentists Ready for Aesthetics?
Aim: This study aimed to evaluate the knowledge, experience, awareness, and motivation of 4th- and 5th-year dental students regarding anterior aesthetic restorations. Methods: This study was approved by the Selçuk University Faculty of Dentistry Non-Interventional Clinical Research Ethics Committee. In this study, a Google Form survey consisting of a total of 31 questions was prepared. Invitations were sent to 4th and 5th-year students from 9 different dentistry faculties via e-mail and social media. A total of 240 participants from all faculties responded to the survey study. The personal information of the participants was not recorded, and the data were analyzed anonymously. Kruskal-Wallis, Mann-Whitney U and T tests were used for statistical analysis of the survey results (p0.05). A T-test was conducted to analyze the difference in competency levels between 4th and 5th-year dental students. According to the test results, no statistically significant difference was observed between the competency levels of 4th and 5th-year students (p>0.05). Conclusion: This study reveals that 4th- and 5th-year dental students feel inadequately prepared for anterior aesthetic restorations and seek more opportunities for practical training. Expanding this preliminary study with more extensive participation and collaboration across other dental faculties is recommended. Keywords: Smile design, undergraduate education in dentistry, anterior restoration
- Open Access
- 19 September 2025
- Published by Selcuk Dental Journal in Selcuk Dental Journal
- Vol. 12 (4) , 25-29
Integration of Artificial Intelligence into Dental Education: Perspectives of Students and Academicians
Objective This study aims to evaluate dental students' awareness of AI in dentistry, its applications, and their knowledge regarding the ethical and legal frameworks governing its use. Materials and Methods The study was conducted using the Google Forms survey platform with the participation of 161 dental students and academicians aged between 18-45+. Ethical approval was obtained from the Non-Interventional Clinical Research Ethics Committee of Selçuk University Faculty of Dentistry. Third-, fourth-, and fifth-year dental students, as well as dental academicians from various institutions across Turkey, were invited to participate via email and social media. Personal data were not recorded, and responses were analyzed anonymously. The survey consisted of four sections with a total of 30 questions:(1) demographic information(3 questions),(2) AI awareness(3 questions),(3) AI applications(17 questions),(4) challenges in integrating AI into dental education and ethical concerns(6 questions), and (5) opinions and recommendations(1 question). The survey results were statistically analyzed using the Chi-Square test and the Kruskal-Wallis test. Results Among the participants,12.4% were academicians,24.2% were fifth-year students,40.4% were fourth-year students, and 23% were third-year students. A total of 71.5% of participants reported their level of AI-related knowledge as "uncertain," "having no knowledge,"or"having little knowledge." Additionally,28 participants(17.5%) stated that they had limited experience attending AI-related training or seminars. There was no statistically significant difference between educational level and AI awareness or AI applications in dental education(p=0.671 and p=0.496, respectively). However, the perception that "AI should be utilized in clinical education" was statistically significantly higher among fourth- and fifth-year students(p=0.15). A statistically significant difference was observed between third-year students and academicians regarding concerns over AI's impact on patient privacy, confidentiality, and data security(p=0.01). Participants identified the primary challenge in integrating AI into dental education as the lack of technological infrastructure, followed by the insufficiency of educational materials. Additionally,126 participants(88.8%) expressed support for the inclusion of more AI-related content in the dental curriculum. Conclusion The findings indicate a knowledge gap among dental students and professionals regarding AI. The need for improved integration of AI into both education and clinical practice is evident. However, addressing concerns related to data security and patient confidentiality remains a critical area of focus in future research and implementation strategies.
- 19 September 2025
- Published by Selcuk Dental Journal in Selcuk Dental Journal
- Vol. 12 (4) , 25-29
Open AccessIntegration of Artificial Intelligence into Dental Education: Perspectives of Students and Academicians
Objective This study aims to evaluate dental students' awareness of AI in dentistry, its applications, and their knowledge regarding the ethical and legal frameworks governing its use. Materials and Methods The study was conducted using the Google Forms survey platform with the participation of 161 dental students and academicians aged between 18-45+. Ethical approval was obtained from the Non-Interventional Clinical Research Ethics Committee of Selçuk University Faculty of Dentistry. Third-, fourth-, and fifth-year dental students, as well as dental academicians from various institutions across Turkey, were invited to participate via email and social media. Personal data were not recorded, and responses were analyzed anonymously. The survey consisted of four sections with a total of 30 questions:(1) demographic information(3 questions),(2) AI awareness(3 questions),(3) AI applications(17 questions),(4) challenges in integrating AI into dental education and ethical concerns(6 questions), and (5) opinions and recommendations(1 question). The survey results were statistically analyzed using the Chi-Square test and the Kruskal-Wallis test. Results Among the participants,12.4% were academicians,24.2% were fifth-year students,40.4% were fourth-year students, and 23% were third-year students. A total of 71.5% of participants reported their level of AI-related knowledge as "uncertain," "having no knowledge,"or"having little knowledge." Additionally,28 participants(17.5%) stated that they had limited experience attending AI-related training or seminars. There was no statistically significant difference between educational level and AI awareness or AI applications in dental education(p=0.671 and p=0.496, respectively). However, the perception that "AI should be utilized in clinical education" was statistically significantly higher among fourth- and fifth-year students(p=0.15). A statistically significant difference was observed between third-year students and academicians regarding concerns over AI's impact on patient privacy, confidentiality, and data security(p=0.01). Participants identified the primary challenge in integrating AI into dental education as the lack of technological infrastructure, followed by the insufficiency of educational materials. Additionally,126 participants(88.8%) expressed support for the inclusion of more AI-related content in the dental curriculum. Conclusion The findings indicate a knowledge gap among dental students and professionals regarding AI. The need for improved integration of AI into both education and clinical practice is evident. However, addressing concerns related to data security and patient confidentiality remains a critical area of focus in future research and implementation strategies.
- Open Access
- 19 September 2025
- Published by Selcuk Dental Journal in Selcuk Dental Journal
- Vol. 12 (4) , 17-24
Student-Centered Education in Dentistry: Perspectives of Students and Academicians in Turkey
Objective This study aims to evaluate the knowledge and attitudes of academicians regarding SCE in undergraduate dental education. Materials and Methods The study was conducted using a Google Forms survey platform with the participation of 254 dental students (from first to fifth year) and 97 academicians. The survey assessed knowledge and awareness of SCE, current practices and experiences, encountered challenges, and recommendations for improvement. Ethical approval was obtained from the Non-Interventional Clinical Research Ethics Committee of Selcuk University Faculty of Dentistry. Dental students and academicians across Turkey were invited to participate via email and social media. Personal data were not recorded, and responses were analyzed anonymously. Collected data were statistically analyzed using the Chi-Square test and the Kruskal-Wallis test. Results No statistically significant difference was observed in SCE awareness between research assistants and assistant/associate professors (p=0.11). However, a statistically significant difference was found in the level of knowledge regarding Problem-Based Learning (PBL) and the Flipped Classroom Model (FCM) across academic titles (p=0.018). A total of 36.1% of participants considered themselves competent in implementing student-centered education methods in undergraduate training. Both students and academicians identified PBL and FCM as the least preferred educational methods. The most reported challenges in implementing SCE methods were time management (65% for students, 72.2% for academicians) and insufficient technological infrastructure (68% for students, 64.9% for academicians). The most frequently cited supportive factor necessary for enhancing the effectiveness of these methods was the improvement of technological infrastructure (74.4% for students, 85.6% for academicians). Conclusion Although healthcare education in Turkey aligns with international standards, significant deficiencies exist in both knowledge and implementation of SCE methods. Enhancing awareness and providing targeted training on these methods can contribute to the development of highly qualified professionals and the delivery of improved healthcare services.
- 19 September 2025
- Published by Selcuk Dental Journal in Selcuk Dental Journal
- Vol. 12 (4) , 17-24
Open AccessStudent-Centered Education in Dentistry: Perspectives of Students and Academicians in Turkey
Objective This study aims to evaluate the knowledge and attitudes of academicians regarding SCE in undergraduate dental education. Materials and Methods The study was conducted using a Google Forms survey platform with the participation of 254 dental students (from first to fifth year) and 97 academicians. The survey assessed knowledge and awareness of SCE, current practices and experiences, encountered challenges, and recommendations for improvement. Ethical approval was obtained from the Non-Interventional Clinical Research Ethics Committee of Selcuk University Faculty of Dentistry. Dental students and academicians across Turkey were invited to participate via email and social media. Personal data were not recorded, and responses were analyzed anonymously. Collected data were statistically analyzed using the Chi-Square test and the Kruskal-Wallis test. Results No statistically significant difference was observed in SCE awareness between research assistants and assistant/associate professors (p=0.11). However, a statistically significant difference was found in the level of knowledge regarding Problem-Based Learning (PBL) and the Flipped Classroom Model (FCM) across academic titles (p=0.018). A total of 36.1% of participants considered themselves competent in implementing student-centered education methods in undergraduate training. Both students and academicians identified PBL and FCM as the least preferred educational methods. The most reported challenges in implementing SCE methods were time management (65% for students, 72.2% for academicians) and insufficient technological infrastructure (68% for students, 64.9% for academicians). The most frequently cited supportive factor necessary for enhancing the effectiveness of these methods was the improvement of technological infrastructure (74.4% for students, 85.6% for academicians). Conclusion Although healthcare education in Turkey aligns with international standards, significant deficiencies exist in both knowledge and implementation of SCE methods. Enhancing awareness and providing targeted training on these methods can contribute to the development of highly qualified professionals and the delivery of improved healthcare services.
- Open Access
- 30 June 2025
- Published by Marmara University in Clinical and Experimental Health Sciences
- Vol. 15 (2) , 373-379
Evaluating the Clinical Performance of Highly Filled Injectable Composite and Condensable Universal Composite Restorations: A One-Year Randomized Clinical Trial
Objective: Composite materials are constantly renewed and developed. Recently, injectable composite materials with filler ratios similar to condensable composites have been made available to clinicians. The purpose of this randomized controlled clinical trial was to evaluate the one-year clinical performance of Class II restorations performed with injectable and condensable universal composite resins. Methods: The study involved 71 patients (45 female, 26 male) and 140 restorations. It used G-aenial Universal Injectable (GCI; GC, Tokyo, Japan), G-aenial A'CHORD (GCA; GC, Tokyo, Japan), Tetric Prime (TP; İvoclar Vivadent, Lichtenstein), Filtek Ultimate (FU; 3M ESPE, St. Paul, MN, USA) universal composites, and the Clearfil SE Bond (Kuraray Noritake Dental, Japan) self-etch adhesive system. Restorations were evaluated and scored according to modified USPHS criteria at baseline, six months, and one year. Cochran Q and Fisher-Freeman-Halton tests were used for statistical analysis (p< .05). Results: At the end of the first year, no significant differences over time were observed in any parameter within any material group (p> .05). The study's materials were compared, showing statistically similar results (p> .05). Conclusion: This study found that all materials, including the injectable universal composite, demonstrated similar and successful clinical performance at the end of the first year.
- 30 June 2025
- Published by Marmara University in Clinical and Experimental Health Sciences
- Vol. 15 (2) , 373-379
Open AccessEvaluating the Clinical Performance of Highly Filled Injectable Composite and Condensable Universal Composite Restorations: A One-Year Randomized Clinical Trial
Objective: Composite materials are constantly renewed and developed. Recently, injectable composite materials with filler ratios similar to condensable composites have been made available to clinicians. The purpose of this randomized controlled clinical trial was to evaluate the one-year clinical performance of Class II restorations performed with injectable and condensable universal composite resins. Methods: The study involved 71 patients (45 female, 26 male) and 140 restorations. It used G-aenial Universal Injectable (GCI; GC, Tokyo, Japan), G-aenial A'CHORD (GCA; GC, Tokyo, Japan), Tetric Prime (TP; İvoclar Vivadent, Lichtenstein), Filtek Ultimate (FU; 3M ESPE, St. Paul, MN, USA) universal composites, and the Clearfil SE Bond (Kuraray Noritake Dental, Japan) self-etch adhesive system. Restorations were evaluated and scored according to modified USPHS criteria at baseline, six months, and one year. Cochran Q and Fisher-Freeman-Halton tests were used for statistical analysis (p< .05). Results: At the end of the first year, no significant differences over time were observed in any parameter within any material group (p> .05). The study's materials were compared, showing statistically similar results (p> .05). Conclusion: This study found that all materials, including the injectable universal composite, demonstrated similar and successful clinical performance at the end of the first year.