Merve Gürses
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Merve Gürses has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Nimet Ünlü
Selçuk Üniversitesi, Diş Hekimliği Fakültesi
5 shared publications - Nevin Çobanoğlu
Selcuk Universitesi
3 shared publications - Atiye Tuğba Kuzgun Türkmen
Selçuk Üniversitesi, Diş Hekimliği Fakültesi
2 shared publications - Furkan Kozakoğlu
Faculty of Dentistry, Department of Restorative Dentistry, Karamanoğlu Mehmetbey University, Karaman, Türkiye.
2 shared publications - Oguz Kaan Tuysuz
Faculty of Dentistry, Restorative Dentistry Selcuk University Konya Turkey
2 shared publications - Ali Kamuran Özkan
SELÇUK ÜNİVERSİTESİ, DİŞ HEKİMLİĞİ FAKÜLTES
1 shared publication
Latest Publications
- Open Access
- 24 August 2026
- Published by Selcuk Dental Journal in Selcuk Dental Journal
- Vol. 13 (2) , 240-246
Opinions of Intern Dentists and Practicing Dentists on Integrated (Multidisciplinary) Clinical Education
Background: Integrated (multidisciplinary) clinical education is gaining increasing importance in dental curricula as an approach aimed at developing comprehensive treatment planning and clinical competence. This study aims to evaluate the views of dental students, graduate dentists, and faculty members regarding integrated clinical education and to shed light on future curriculum arrangements.Methods: A 13-question survey was prepared in Google Forms and distributed to fourth- and fifth-year dental students, licensed dentists, and faculty members nationwide. A total of 178 participants from eleven different dental faculties responded to the survey. The survey consisted of multiple-choice and 5-point Likert scale questions covering educational value, structure, duration, assessment methods, and open-ended feedback. The data were analyzed using descriptive statistical methods.Results: The vast majority of participants found integrated clinical training to be necessary and beneficial. Endodontics, restorative dentistry, prosthetic dentistry, and periodontology were identified as the most fundamental disciplines to include in integrated clinical training. Participants preferred a structured but time-limited model (half a term or annual practice in the final year). A multidimensional, points-based assessment system was deemed more appropriate than threshold-based systems based on patient or procedure counts. Open-ended responses emphasized the importance of quality and case complexity over quantity and highlighted concerns about stress, workload, and organizational issues.Conclusions: Students and graduates widely support integrated clinical education as a valuable educational model that promotes holistic treatment planning and multidisciplinary coordination. However, to maximize educational effectiveness, assessment systems, organizational structure, and student-centered practices need to be developed.Keywords: integrated clinical training, multidisciplinary dentistry, dental curriculum
- 24 August 2026
- Published by Selcuk Dental Journal in Selcuk Dental Journal
- Vol. 13 (2) , 240-246
Open AccessOpinions of Intern Dentists and Practicing Dentists on Integrated (Multidisciplinary) Clinical Education
Background: Integrated (multidisciplinary) clinical education is gaining increasing importance in dental curricula as an approach aimed at developing comprehensive treatment planning and clinical competence. This study aims to evaluate the views of dental students, graduate dentists, and faculty members regarding integrated clinical education and to shed light on future curriculum arrangements.Methods: A 13-question survey was prepared in Google Forms and distributed to fourth- and fifth-year dental students, licensed dentists, and faculty members nationwide. A total of 178 participants from eleven different dental faculties responded to the survey. The survey consisted of multiple-choice and 5-point Likert scale questions covering educational value, structure, duration, assessment methods, and open-ended feedback. The data were analyzed using descriptive statistical methods.Results: The vast majority of participants found integrated clinical training to be necessary and beneficial. Endodontics, restorative dentistry, prosthetic dentistry, and periodontology were identified as the most fundamental disciplines to include in integrated clinical training. Participants preferred a structured but time-limited model (half a term or annual practice in the final year). A multidimensional, points-based assessment system was deemed more appropriate than threshold-based systems based on patient or procedure counts. Open-ended responses emphasized the importance of quality and case complexity over quantity and highlighted concerns about stress, workload, and organizational issues.Conclusions: Students and graduates widely support integrated clinical education as a valuable educational model that promotes holistic treatment planning and multidisciplinary coordination. However, to maximize educational effectiveness, assessment systems, organizational structure, and student-centered practices need to be developed.Keywords: integrated clinical training, multidisciplinary dentistry, dental curriculum
- 13 July 2026
- Published by Springer Nature in Clinical Oral Investigations
- Vol. 30 (8)
One-year clinical performance of polyethylene fiber-reinforced direct composite restorations in endodontically treated posterior teeth.
This study evaluated the 1-year clinical performance of polyethylene fiber-reinforced direct composite restorations placed in different orientations in endodontically treated premolars and molars. Eighty-five patients with 90 endodontically treated posterior teeth (32 premolars, 58 molars) received direct composite restorations using Clearfil SE Bond (Kuraray Noritake Dental Inc., Japan), G-aenial Universal Injectable and G-aenial A'CHORD (GC Corp., Japan), and polyethylene fiber (Ribbond, Ribbond Inc., USA). According to cavity configuration, fibers were placed in circumferential (O), mesiodistal (MD), or buccolingual (BL) orientations. Clinical performance was assessed using modified USPHS criteria at 7 days, 6 months, and 12 months. All restorations maintained Alpha scores for color match and secondary caries throughout the study period. At 12 months, limited Bravo scores were observed for retention, marginal discoloration, marginal adaptation, anatomical form, and surface texture. One restoration in the MD group received a Charlie score for retention and required replacement. No statistically significant differences were detected among the three fiber-orientation groups for any evaluated parameter (p > 0.05). Polyethylene fiber-reinforced direct composite restorations demonstrated favorable short-term clinical performance in endodontically treated posterior teeth. Fiber orientation did not significantly influence clinical outcomes.
- 13 July 2026
- Published by Springer Nature in Clinical Oral Investigations
- Vol. 30 (8)
One-year clinical performance of polyethylene fiber-reinforced direct composite restorations in endodontically treated posterior teeth.
This study evaluated the 1-year clinical performance of polyethylene fiber-reinforced direct composite restorations placed in different orientations in endodontically treated premolars and molars. Eighty-five patients with 90 endodontically treated posterior teeth (32 premolars, 58 molars) received direct composite restorations using Clearfil SE Bond (Kuraray Noritake Dental Inc., Japan), G-aenial Universal Injectable and G-aenial A'CHORD (GC Corp., Japan), and polyethylene fiber (Ribbond, Ribbond Inc., USA). According to cavity configuration, fibers were placed in circumferential (O), mesiodistal (MD), or buccolingual (BL) orientations. Clinical performance was assessed using modified USPHS criteria at 7 days, 6 months, and 12 months. All restorations maintained Alpha scores for color match and secondary caries throughout the study period. At 12 months, limited Bravo scores were observed for retention, marginal discoloration, marginal adaptation, anatomical form, and surface texture. One restoration in the MD group received a Charlie score for retention and required replacement. No statistically significant differences were detected among the three fiber-orientation groups for any evaluated parameter (p > 0.05). Polyethylene fiber-reinforced direct composite restorations demonstrated favorable short-term clinical performance in endodontically treated posterior teeth. Fiber orientation did not significantly influence clinical outcomes.
- 27 April 2026
- Published by Selcuk Dental Journal in Selcuk Dental Journal
- Vol. 13 (1) , 129-133
The Effect of Adhesive Procedures on the Repair Bond Strength of Aged Universal Composites
Background: The purpose of this study is to evaluate the repair bond strength of aged universal composites after surface treatment and different adhesive applications.Methods: Three universal composites (GC Achord, Filtek Ultimate, Clearfil Majesty) were used to prepare 315 specimens (n=105 per composite). Seven groups were created: a negative control (NC) (only polished), a positive control (PC) (bur–roughened-only) and five experimental groups in which roughened surfaces were treated with G2-Bond Universal (G2), Prime&Bond Universal (PB), Clearfil SE Bond (SE), the hydrophobic bond of G2 (G2B), the hydrophobic bond of SE (SEB). Repair restorations were completed using Nova Compo HS. Shear bond strength was measured at a crosshead speed of 1 mm/min, and values were recorded in MPa. Fracture modes were classified as adhesive, cohesive, or mixed. Data were analyzed using the Kruskal–Wallis test (p
- 27 April 2026
- Published by Selcuk Dental Journal in Selcuk Dental Journal
- Vol. 13 (1) , 129-133
The Effect of Adhesive Procedures on the Repair Bond Strength of Aged Universal Composites
Background: The purpose of this study is to evaluate the repair bond strength of aged universal composites after surface treatment and different adhesive applications.Methods: Three universal composites (GC Achord, Filtek Ultimate, Clearfil Majesty) were used to prepare 315 specimens (n=105 per composite). Seven groups were created: a negative control (NC) (only polished), a positive control (PC) (bur–roughened-only) and five experimental groups in which roughened surfaces were treated with G2-Bond Universal (G2), Prime&Bond Universal (PB), Clearfil SE Bond (SE), the hydrophobic bond of G2 (G2B), the hydrophobic bond of SE (SEB). Repair restorations were completed using Nova Compo HS. Shear bond strength was measured at a crosshead speed of 1 mm/min, and values were recorded in MPa. Fracture modes were classified as adhesive, cohesive, or mixed. Data were analyzed using the Kruskal–Wallis test (p
- Open Access
- 19 September 2025
- Published by Selcuk Dental Journal in Selcuk Dental Journal
- Vol. 12 (4) , 35-41
Are Future Dentists Ready for Aesthetics?
Aim: This study aimed to evaluate the knowledge, experience, awareness, and motivation of 4th- and 5th-year dental students regarding anterior aesthetic restorations. Methods: This study was approved by the Selçuk University Faculty of Dentistry Non-Interventional Clinical Research Ethics Committee. In this study, a Google Form survey consisting of a total of 31 questions was prepared. Invitations were sent to 4th and 5th-year students from 9 different dentistry faculties via e-mail and social media. A total of 240 participants from all faculties responded to the survey study. The personal information of the participants was not recorded, and the data were analyzed anonymously. Kruskal-Wallis, Mann-Whitney U and T tests were used for statistical analysis of the survey results (p0.05). A T-test was conducted to analyze the difference in competency levels between 4th and 5th-year dental students. According to the test results, no statistically significant difference was observed between the competency levels of 4th and 5th-year students (p>0.05). Conclusion: This study reveals that 4th- and 5th-year dental students feel inadequately prepared for anterior aesthetic restorations and seek more opportunities for practical training. Expanding this preliminary study with more extensive participation and collaboration across other dental faculties is recommended. Keywords: Smile design, undergraduate education in dentistry, anterior restoration
- 19 September 2025
- Published by Selcuk Dental Journal in Selcuk Dental Journal
- Vol. 12 (4) , 35-41
Open AccessAre Future Dentists Ready for Aesthetics?
Aim: This study aimed to evaluate the knowledge, experience, awareness, and motivation of 4th- and 5th-year dental students regarding anterior aesthetic restorations. Methods: This study was approved by the Selçuk University Faculty of Dentistry Non-Interventional Clinical Research Ethics Committee. In this study, a Google Form survey consisting of a total of 31 questions was prepared. Invitations were sent to 4th and 5th-year students from 9 different dentistry faculties via e-mail and social media. A total of 240 participants from all faculties responded to the survey study. The personal information of the participants was not recorded, and the data were analyzed anonymously. Kruskal-Wallis, Mann-Whitney U and T tests were used for statistical analysis of the survey results (p0.05). A T-test was conducted to analyze the difference in competency levels between 4th and 5th-year dental students. According to the test results, no statistically significant difference was observed between the competency levels of 4th and 5th-year students (p>0.05). Conclusion: This study reveals that 4th- and 5th-year dental students feel inadequately prepared for anterior aesthetic restorations and seek more opportunities for practical training. Expanding this preliminary study with more extensive participation and collaboration across other dental faculties is recommended. Keywords: Smile design, undergraduate education in dentistry, anterior restoration
- Open Access
- 30 June 2025
- Published by Marmara University in Clinical and Experimental Health Sciences
- Vol. 15 (2) , 373-379
Evaluating the Clinical Performance of Highly Filled Injectable Composite and Condensable Universal Composite Restorations: A One-Year Randomized Clinical Trial
Objective: Composite materials are constantly renewed and developed. Recently, injectable composite materials with filler ratios similar to condensable composites have been made available to clinicians. The purpose of this randomized controlled clinical trial was to evaluate the one-year clinical performance of Class II restorations performed with injectable and condensable universal composite resins. Methods: The study involved 71 patients (45 female, 26 male) and 140 restorations. It used G-aenial Universal Injectable (GCI; GC, Tokyo, Japan), G-aenial A'CHORD (GCA; GC, Tokyo, Japan), Tetric Prime (TP; İvoclar Vivadent, Lichtenstein), Filtek Ultimate (FU; 3M ESPE, St. Paul, MN, USA) universal composites, and the Clearfil SE Bond (Kuraray Noritake Dental, Japan) self-etch adhesive system. Restorations were evaluated and scored according to modified USPHS criteria at baseline, six months, and one year. Cochran Q and Fisher-Freeman-Halton tests were used for statistical analysis (p< .05). Results: At the end of the first year, no significant differences over time were observed in any parameter within any material group (p> .05). The study's materials were compared, showing statistically similar results (p> .05). Conclusion: This study found that all materials, including the injectable universal composite, demonstrated similar and successful clinical performance at the end of the first year.
- 30 June 2025
- Published by Marmara University in Clinical and Experimental Health Sciences
- Vol. 15 (2) , 373-379
Open AccessEvaluating the Clinical Performance of Highly Filled Injectable Composite and Condensable Universal Composite Restorations: A One-Year Randomized Clinical Trial
Objective: Composite materials are constantly renewed and developed. Recently, injectable composite materials with filler ratios similar to condensable composites have been made available to clinicians. The purpose of this randomized controlled clinical trial was to evaluate the one-year clinical performance of Class II restorations performed with injectable and condensable universal composite resins. Methods: The study involved 71 patients (45 female, 26 male) and 140 restorations. It used G-aenial Universal Injectable (GCI; GC, Tokyo, Japan), G-aenial A'CHORD (GCA; GC, Tokyo, Japan), Tetric Prime (TP; İvoclar Vivadent, Lichtenstein), Filtek Ultimate (FU; 3M ESPE, St. Paul, MN, USA) universal composites, and the Clearfil SE Bond (Kuraray Noritake Dental, Japan) self-etch adhesive system. Restorations were evaluated and scored according to modified USPHS criteria at baseline, six months, and one year. Cochran Q and Fisher-Freeman-Halton tests were used for statistical analysis (p< .05). Results: At the end of the first year, no significant differences over time were observed in any parameter within any material group (p> .05). The study's materials were compared, showing statistically similar results (p> .05). Conclusion: This study found that all materials, including the injectable universal composite, demonstrated similar and successful clinical performance at the end of the first year.
- Open Access
- 27 November 2024
- Published by Ankara University in European Annals of Dental Sciences
- Vol. 51 (Suppl 1 (U) , 14-18
Evaluation of Specialization Preferences of Faculty of Dentistry Students
Purpose: The aim of this study is to evaluate the post-graduation specialty education preferences of 3rd and 5th year dentistry students and the factors that motivate these preferences. Materials and Methods: This survey was applied to students of Selçuk University Faculty of Dentistry. A total of 207 students, 104 3rd grade and 103 5th grade students, participated in the study. Two different response types were used in the study: multiple choice and linear scale (1=strongly disagree, 2=disagree, 3=undecided, 4=agree, 5=strongly agree). A survey form was applied to the students via Google Forms. Results: While 3rd graders are mostly undecided about whether their undergraduate education should focus on DSE (48.1%), 5th graders think that undergraduate education (62.1%) is not aimed at DSE. In both grades, the rate of those who find it necessary to attend private teaching institutions is high. When choosing a department, 3rd-grade students (29.8%) mostly prefer Orthodontics; 5th graders (32%) chose Oral and Maxillofacial Surgery. While the 5th-grade students said they would prefer a faculty different from their own for specialization training, most 3rd-grade students were undecided. However, both grades stated that the department was more effective in determining their training specialty preferences than the city and university. Conclusion: Clinical internship training has an essential place in post-graduation career planning. Department preferences of 3rd and 5th-grade students in their specialization education differ. For both the 3rd and 5th grades, the department was more effective in determining their specialty training preferences than the city and university.
- 27 November 2024
- Published by Ankara University in European Annals of Dental Sciences
- Vol. 51 (Suppl 1 (U) , 14-18
Open AccessEvaluation of Specialization Preferences of Faculty of Dentistry Students
Purpose: The aim of this study is to evaluate the post-graduation specialty education preferences of 3rd and 5th year dentistry students and the factors that motivate these preferences. Materials and Methods: This survey was applied to students of Selçuk University Faculty of Dentistry. A total of 207 students, 104 3rd grade and 103 5th grade students, participated in the study. Two different response types were used in the study: multiple choice and linear scale (1=strongly disagree, 2=disagree, 3=undecided, 4=agree, 5=strongly agree). A survey form was applied to the students via Google Forms. Results: While 3rd graders are mostly undecided about whether their undergraduate education should focus on DSE (48.1%), 5th graders think that undergraduate education (62.1%) is not aimed at DSE. In both grades, the rate of those who find it necessary to attend private teaching institutions is high. When choosing a department, 3rd-grade students (29.8%) mostly prefer Orthodontics; 5th graders (32%) chose Oral and Maxillofacial Surgery. While the 5th-grade students said they would prefer a faculty different from their own for specialization training, most 3rd-grade students were undecided. However, both grades stated that the department was more effective in determining their training specialty preferences than the city and university. Conclusion: Clinical internship training has an essential place in post-graduation career planning. Department preferences of 3rd and 5th-grade students in their specialization education differ. For both the 3rd and 5th grades, the department was more effective in determining their specialty training preferences than the city and university.
- 30 April 2024
- Published by Necmettin Erbakan Universitesi Dis Hekimligi Dergisi (NEU Dent J), Necmettin Erbakan University in Necmettin Erbakan Universitesi Dis Hekimligi Dergisi (NEUDentJ), Necmettin Erbakan
Comparison of Push-Out Bond Strengths of Different Fiber Post Systems Bonded with Resin Cement
Aim: This study compares the push-out bond strengths of 3 different fiber post systems bonded with resin cement to root canal dentin. Material and Methods: The study used 15 extracted single-rooted mandibular canine teeth. After the endodontic treatment of the teeth, they were randomly divided into three groups to apply different post-systems (n=5). Reforpost glass-fiber, Polydentia glass-fiber, and AAA Transparent fiber post systems were used in this study. The posts have adhered to the root canal with Panavia F2.0. A total of 6 slices of 1 mm thickness in the transversal direction were obtained, two from each of the coronal, middle, and apical sections of the prepared samples. The push-out test was performed from apical to coronal at a 0.5 mm/min speed. ANOVA and Tukey HSD tests were used for statistical analysis (p<0.05). Results: The highest push-out binding values were observed in Polydentia (5.04±0.54); the lowest was seen in Reforpost (1.5±1.03). There was no statistical difference between the push-out binding values of the samples' apical, middle, and coronal regions for Reforpost and Transparent groups. In Polydentia group, the push-out binding values of the coronal region samples were significantly higher than those in the middle region. When the post groups were compared, the difference between the push-out binding values of all groups was statistically significant. Conclusion: The surface properties of the posts can affect the push-out bonding values. Polydentia showed the highest push-out binding values. In addition, the push-out attachment values of the posts may vary in different root canal regions.
- 30 April 2024
- Published by Necmettin Erbakan Universitesi Dis Hekimligi Dergisi (NEU Dent J), Necmettin Erbakan University in Necmettin Erbakan Universitesi Dis Hekimligi Dergisi (NEUDentJ), Necmettin Erbakan
Comparison of Push-Out Bond Strengths of Different Fiber Post Systems Bonded with Resin Cement
Aim: This study compares the push-out bond strengths of 3 different fiber post systems bonded with resin cement to root canal dentin. Material and Methods: The study used 15 extracted single-rooted mandibular canine teeth. After the endodontic treatment of the teeth, they were randomly divided into three groups to apply different post-systems (n=5). Reforpost glass-fiber, Polydentia glass-fiber, and AAA Transparent fiber post systems were used in this study. The posts have adhered to the root canal with Panavia F2.0. A total of 6 slices of 1 mm thickness in the transversal direction were obtained, two from each of the coronal, middle, and apical sections of the prepared samples. The push-out test was performed from apical to coronal at a 0.5 mm/min speed. ANOVA and Tukey HSD tests were used for statistical analysis (p<0.05). Results: The highest push-out binding values were observed in Polydentia (5.04±0.54); the lowest was seen in Reforpost (1.5±1.03). There was no statistical difference between the push-out binding values of the samples' apical, middle, and coronal regions for Reforpost and Transparent groups. In Polydentia group, the push-out binding values of the coronal region samples were significantly higher than those in the middle region. When the post groups were compared, the difference between the push-out binding values of all groups was statistically significant. Conclusion: The surface properties of the posts can affect the push-out bonding values. Polydentia showed the highest push-out binding values. In addition, the push-out attachment values of the posts may vary in different root canal regions.
- Open Access
- 6 January 2024
- Published by Wiley in Microscopy Research and Technique
- Vol. 87 (5) , 977-990
Changes in physical properties of universal composites and CAD/CAM materials after bleaching and antioxidant applications: Scanning electron microscope and atomic force microscope evaluation
To evaluate the effects of vital bleaching agents and the subsequent application of ascorbic acid (AA) to universal composites and resin‐based CAD/CAM blocks on the physical properties of materials. In the study; G‐enial A'chord (GCA), Filtek Ultimate (FU), Clearfil Majesty (CM) composites, and LAVA Ultimate (LU), Cerasmart (GCC) CAD/CAM blocks were used. The materials were divided into two subgroups based on the applied bleaching type (n = 30/group): office bleaching (OB) and home bleaching (HB). After bleaching, AA was applied to the samples. Surface roughness, microhardness, and color change values of all samples were measured at three stages: initial (I), post‐bleaching (B), and post‐bleaching+AA application (BA). Statistical analysis was performed using 3‐way Mixed ANOVA with Bonferroni correction (p < .05). The BA of the HB group of CM; the B of the HB group of LU; the B roughness values of both the OB and HB groups of GCC were significantly lower than I. The microhardness values of all the materials examined decreased significantly after both bleaching (p < .05). With regard to the AA application, it significantly decreased Ra values in the HB group of CM. In addition, it significantly increased the microhardness values in the HB groups of CM and GCC. Also, the ΔE001 and ΔE002 values for the FU and GCC HB groups were significantly higher than in the OB groups (p < .05). Bleaching and AA application affected the physical properties of the materials. The physical properties of the materials either remained unchanged or improved with the application of AA after bleaching.Research Highlights: This article presents in vitro results of a new approach that has not been studied before. Ascorbic acid, used to increase the bond strength between the material‐tooth after bleaching, was used to eliminate the adverse effects of bleaching on the physical properties of aesthetic restorative materials. Additionally, the effects of all procedures on the materials were examined using scanning electron microscopy (SEM) and atomic force microscopy (AFM). As a result of the study, it was concluded that the application of ascorbic acid after bleaching improved the physical properties of some of the materials.
- 6 January 2024
- Published by Wiley in Microscopy Research and Technique
- Vol. 87 (5) , 977-990
Open AccessChanges in physical properties of universal composites and CAD/CAM materials after bleaching and antioxidant applications: Scanning electron microscope and atomic force microscope evaluation
To evaluate the effects of vital bleaching agents and the subsequent application of ascorbic acid (AA) to universal composites and resin‐based CAD/CAM blocks on the physical properties of materials. In the study; G‐enial A'chord (GCA), Filtek Ultimate (FU), Clearfil Majesty (CM) composites, and LAVA Ultimate (LU), Cerasmart (GCC) CAD/CAM blocks were used. The materials were divided into two subgroups based on the applied bleaching type (n = 30/group): office bleaching (OB) and home bleaching (HB). After bleaching, AA was applied to the samples. Surface roughness, microhardness, and color change values of all samples were measured at three stages: initial (I), post‐bleaching (B), and post‐bleaching+AA application (BA). Statistical analysis was performed using 3‐way Mixed ANOVA with Bonferroni correction (p < .05). The BA of the HB group of CM; the B of the HB group of LU; the B roughness values of both the OB and HB groups of GCC were significantly lower than I. The microhardness values of all the materials examined decreased significantly after both bleaching (p < .05). With regard to the AA application, it significantly decreased Ra values in the HB group of CM. In addition, it significantly increased the microhardness values in the HB groups of CM and GCC. Also, the ΔE001 and ΔE002 values for the FU and GCC HB groups were significantly higher than in the OB groups (p < .05). Bleaching and AA application affected the physical properties of the materials. The physical properties of the materials either remained unchanged or improved with the application of AA after bleaching.Research Highlights: This article presents in vitro results of a new approach that has not been studied before. Ascorbic acid, used to increase the bond strength between the material‐tooth after bleaching, was used to eliminate the adverse effects of bleaching on the physical properties of aesthetic restorative materials. Additionally, the effects of all procedures on the materials were examined using scanning electron microscopy (SEM) and atomic force microscopy (AFM). As a result of the study, it was concluded that the application of ascorbic acid after bleaching improved the physical properties of some of the materials.
- 27 April 2023
- Published by Bezmialem Vakif University in Bezmialem Science
- Vol. 11 (2) , 141-150
Clinical Evaluation of Class II Restorations Made with Bulk-fill Restorative Materials
- 27 April 2023
- Published by Bezmialem Vakif University in Bezmialem Science
- Vol. 11 (2) , 141-150
Clinical Evaluation of Class II Restorations Made with Bulk-fill Restorative Materials
- Open Access
- 30 September 2021
- Published by Zeus Publishing in International Dental Research
- Vol. 11 (Suppl. 1) , 234-237
Comparative evaluation of the color stability of universal composites
Aim: The aim of this study is to compare the color stability of different universal composites and to evaluate the effects of keeping them in water for 1 week before coloring. Methodology: Filtek Ultimate (FU), Estelite Ʃ Quick (EQ), and Ceram X One (CX) composites were used. The specimens were kept in the dark, dry environment for 24 hours, then polished, and each composite group was divided into 3 groups: the control, the group that was kept in water for 1 week before coloring and coloring (n=7). The samples in the control group were kept in distilled water for 3 weeks. Samples in the coloring group were colored with coffee for 2 weeks (C), and the samples in the last group were kept in water for 1 week and then stained with coffee for 2 weeks (W+C) (n=7). Color measurements for all samples were taken twice, once before and once after the coloring period. The color changes of the samples were measured using the ∆E* parameter, which was calculated with before and after measurements. Results: For all composite resins, the ΔE values of the samples in the W+C and C groups were significantly higher than those in the control group. When the composites were compared with each other, the differences between the ΔE values of the composites in the control, W+C, and C groups were not statistically significant. For FU and ESQ, at the end of the coloration period, there were no statistically significant differences between the W+C and C groups. However, for CX, the color change of the samples in the W+C group was significantly higher than that in the C group. Conclusion: Storage in distilled water for 1 week before staining did not reduce the color change values of the samples. Thus, after composite restorations are performed, there is no need to advise patients to avoid staining foods, especially in the first week after restoration. How to cite this article: Abdulateef OF, Çobanoğlu N, Gürses M. Comparative evaluation of the color stability of universal composites. Int Dent Res 2021;11(Suppl.1):234-7. https://doi.org/10.5577/intdentres.2021.vol11.suppl1.34 Linguistic Revision: The English in this manuscript has been checked by at least two professional editors, both native speakers of English.
- 30 September 2021
- Published by Zeus Publishing in International Dental Research
- Vol. 11 (Suppl. 1) , 234-237
Open AccessComparative evaluation of the color stability of universal composites
Aim: The aim of this study is to compare the color stability of different universal composites and to evaluate the effects of keeping them in water for 1 week before coloring. Methodology: Filtek Ultimate (FU), Estelite Ʃ Quick (EQ), and Ceram X One (CX) composites were used. The specimens were kept in the dark, dry environment for 24 hours, then polished, and each composite group was divided into 3 groups: the control, the group that was kept in water for 1 week before coloring and coloring (n=7). The samples in the control group were kept in distilled water for 3 weeks. Samples in the coloring group were colored with coffee for 2 weeks (C), and the samples in the last group were kept in water for 1 week and then stained with coffee for 2 weeks (W+C) (n=7). Color measurements for all samples were taken twice, once before and once after the coloring period. The color changes of the samples were measured using the ∆E* parameter, which was calculated with before and after measurements. Results: For all composite resins, the ΔE values of the samples in the W+C and C groups were significantly higher than those in the control group. When the composites were compared with each other, the differences between the ΔE values of the composites in the control, W+C, and C groups were not statistically significant. For FU and ESQ, at the end of the coloration period, there were no statistically significant differences between the W+C and C groups. However, for CX, the color change of the samples in the W+C group was significantly higher than that in the C group. Conclusion: Storage in distilled water for 1 week before staining did not reduce the color change values of the samples. Thus, after composite restorations are performed, there is no need to advise patients to avoid staining foods, especially in the first week after restoration. How to cite this article: Abdulateef OF, Çobanoğlu N, Gürses M. Comparative evaluation of the color stability of universal composites. Int Dent Res 2021;11(Suppl.1):234-7. https://doi.org/10.5577/intdentres.2021.vol11.suppl1.34 Linguistic Revision: The English in this manuscript has been checked by at least two professional editors, both native speakers of English.