NXNeng Xiao

Neng Xiao

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Neng Xiao has a total of 21 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Superoxide-Based K–O2 Batteries: Highly Reversible Oxygen Redox Solves Challenges in Air Electrodes

    by Lei Qin, Luke Schkeryantz, Jingfeng Zheng, Neng Xiao, Yiying Wu

    In the past 20 years, research in metal–O2 batteries has been one of the most exciting interdisciplinary fields of electrochemistry, energy storage, materials chemistry, and surface science. The mechanisms of oxygen reduction and evolution play a key role in understanding and controlling these batteries. With intensive efforts from many prominent research groups, it becomes clear that the instability of superoxide in the presence of Li ions (Li+) and Na ions (Na+) is the fundamental root cause for the poor stability, reversibility, and energy efficiency in aprotic Li–O2 and Na–O2 batteries. Stabilizing superoxide with large K ions (K+) provides a simple but elegant solution. Superoxide-based K–O2 batteries, invented in 2013, adopt the one-electron redox process of O2/potassium superoxide (KO2). Despite being the youngest metal–O2 technology, K–O2 is the most promising rechargeable metal–air battery with the combined advantages of low costs, high energy efficiencies, abundant elements, and good energy densities. However, the development of the K–O2 battery has been overshadowed by Li–O2 and Na–O2 batteries because one might think K–O2 is just an analogous extension. Moreover, due to the lower specific energy and the high reactivity of K metal, K–O2 is often underestimated and deemed unsuitable for practical applications. The objective of this Perspective is to highlight the unique advantages of K–O2 chemistry and to clarify the misconceptions prompted by the name “superoxide” and the judgment bias based on the claimed theoretical specific energies. We will also discuss the current challenges and our perspectives on how to overcome them.


  • From K‐O2 to K‐Air Batteries: Realizing Superoxide Batteries on the Basis of Dry Ambient Air

    by Lei Qin, Neng Xiao, Songwei Zhang, Xiaojuan Chen, Yiying Wu

    Although using an air cathode is the goal for superoxide‐based potassium‐oxygen (K‐O2) batteries, prior studies were limited to pure oxygen. Now, the first K‐air (dry) battery based on reversible superoxide electrochemistry is presented. Spectroscopic and gas chromatography analyses are applied to evaluate the reactivity of KO2 in ambient air. Although KO2 reacts with water vapor and CO2 to form KHCO3, it is highly stable in dry air. With this knowledge, rechargeable K‐air (dry) batteries were successfully demonstrated by employing dry air cathode. The reduced partial pressure of oxygen plays a critical role in boosting battery lifespan. With a more stable environment for the K anode, a K‐air (dry) battery delivers over 100 cycles (>500 h) with low round‐trip overpotentials and high coulombic efficiencies as opposed to traditional K‐O2 battery that fails early. This work sheds light on the benefits and restrictions of employing the air cathode in superoxide‐based batteries.


  • From K‐O2 to K‐Air Batteries: Realizing Superoxide Batteries on the Basis of Dry Ambient Air

    by Lei Qin, Neng Xiao, Songwei Zhang, Xiaojuan Chen, Yiying Wu

    Although using an air cathode is the goal for superoxide‐based potassium‐oxygen (K‐O2) batteries, prior studies were limited to pure oxygen. Now, the first K‐air (dry) battery based on reversible superoxide electrochemistry is presented. Spectroscopic and gas chromatography analyses are applied to evaluate the reactivity of KO2 in ambient air. Although KO2 reacts with water vapor and CO2 to form KHCO3, it is highly stable in dry air. With this knowledge, rechargeable K‐air (dry) batteries were successfully demonstrated by employing dry air cathode. The reduced partial pressure of oxygen plays a critical role in boosting battery lifespan. With a more stable environment for the K anode, a K‐air (dry) battery delivers over 100 cycles (>500 h) with low round‐trip overpotentials and high coulombic efficiencies as opposed to traditional K‐O2 battery that fails early. This work sheds light on the benefits and restrictions of employing the air cathode in superoxide‐based batteries.


  • Localized High‐Concentration Electrolytes Boost Potassium Storage in High‐Loading Graphite

    by Lei Qin, Neng Xiao, Jingfeng Zheng, Yu Lei, Dengyun Zhai, Yiying Wu

    Reversible intercalation of potassium‐ion (K+) into graphite makes it a promising anode material for rechargeable potassium‐ion batteries (PIBs). However, the current graphite anodes in PIBs often suffer from poor cyclic stability with low coulombic efficiency. A stable solid electrolyte interphase (SEI) is necessary for stabilizing the large interlayer expansion during K+ insertion. Herein, a localized high‐concentration electrolyte (LHCE) is designed by adding a highly fluorinated ether into the concentrated potassium bis(fluorosulfonyl)imide/dimethoxyethane, which forms a durable SEI on the graphite surface and enables highly reversible K+ intercalation/deintercalation without solvent cointercalation. Furthermore, this LHCE shows a high ionic conductivity (13.6 mS cm−1) and excellent oxidation stability up to 5.3 V (vs K+/K), which enables compatibility with high‐voltage cathodes. The kinetics study reveals that K+ intercalation/deintercalation does not follow the same pathway. The potassiated graphite exhibits excellent depotassiation rate capability, while the formation of a low stage intercalation compound is the rate‐limiting step during potassiation.


  • Anchoring an Artificial Protective Layer To Stabilize Potassium Metal Anode in Rechargeable K–O2 Batteries

    by Neng Xiao, Jingfeng Zheng, Gerald Gourdin, Luke Schkeryantz, Yiying Wu

    Rechargeable potassium batteries, including the potassium-oxygen (K–O2) battery, are deemed as promising low-cost energy storage solutions. Nevertheless, the chemical stability of the K metal anode remains problematic and hinders their development. In the K–O2 battery, electrolyte and dissolved oxygen tend to be reduced on the K metal anode, which consumes the active material continuously. Herein, an artificial protective layer is engineered on the K metal anode via a one-step method to mitigate side reactions induced by the solvent and reactive oxygen species. The chemical reaction between K and SbF3 leads to an inorganic composite layer that consists of KF, Sb, and KSbxFy on the surface. This in situ synthesized layer effectively prevents K anode corrosion while maintaining good K+ ionic conductivity in K–O2 batteries. Protection from O2 and moisture also ensures battery safety. Improved anode lifespan and cycling performance (>30 days) are further demonstrated. This work introduces a novel strategy to stabilize the K anode for rechargeable potassium metal batteries.


  • Use of Polarization Curves and Impedance Analyses to Optimize the “Triple-Phase Boundary” in K–O2 Batteries

    by Gerald Gourdin, Neng Xiao, William McCulloch, Yiying Wu

    K–O2 superoxide batteries have shown great potential for energy-storage applications due to the unique single-electron redox processes in the oxygen or gas-diffusion electrode. Optimization of the ‘triple-phase boundary’, the region of the cathode where the O2, electrolyte, and electrode surface are in immediate contact, is crucial for maximizing their power performance, but one that has not been explored. Herein, we demonstrate an efficient method for maximizing the power capabilities of the K–O2 battery system by optimizing the interface using polarization and impedance analyses. At the one extreme, an electrolyte volume-deficient state decreases access to the electrochemically active surface area resulting in a limitation of the maximum power output of the K–O2 battery, whereas an excess electrolyte volume state increases the diffusion path to the active surface area for the dissolved O2 inducing mass-transfer limitations sooner, which results in a decrease in the current and power output. Finally, we show that the optimal electrolyte volume closely matches the void volume of the internal cell materials (separators, cathode) resulting in a maximization of the electrochemically accessible surface area while minimizing the O2 diffusion path.


  • Potassium Superoxide: A Unique Alternative for Metal–Air Batteries

    by Neng Xiao, Xiaodi Ren, William D. McCulloch, Gerald Gourdin, Yiying Wu

    Lithium–oxygen (Li–O2) batteries have been envisaged and pursued as the long-term successor to Li-ion batteries, due to the highest theoretical energy density among all known battery chemistries. However, their practical application is hindered by low energy efficiency, sluggish kinetics, and a reliance on catalysts for the oxygen reduction and evolution reactions (ORR/OER). In a superoxide battery, oxygen is also used as the cathodic active medium but is reduced only to superoxide (O2•–), the anion formed by adding an electron to a diatomic oxygen molecule. Therefore, O2/O2•– is a unique single-electron ORR/OER process. Since the introduction of K–O2 batteries by our group in 2013, superoxide batteries based on potassium superoxide (KO2) have attracted increasing interest as promising energy storage devices due to their significantly lower overpotentials and costs. We have selected potassium for building the superoxide battery because it is the lightest alkali metal cation to form the thermodynamically stable superoxide (KO2) product. This allows the battery to operate through the proposed facile one-electron redox process of O2/KO2. This strategy provides an elegant solution to the long-lasting kinetic challenge of ORR/OER in metal–oxygen batteries without using any electrocatalysts. Over the past five years, we have been focused on understanding the electrolyte chemistry, especially at the electrode/electrolyte interphase, and the electrolyte’s stability in the presence of potassium metal and superoxide. In this Account, we examine our advances and understanding of the chemistry in superoxide batteries, with an emphasis on our systematic investigation of K–O2 batteries. We first introduce the K metal anode electrochemistry and its corrosion induced by electrolyte decomposition and oxygen crossover. Tuning the electrolyte composition to form a stable solid electrolyte interphase (SEI) is demonstrated to alleviate electrolyte decomposition and O2 cross-talk. We also analyze the nucleation and growth of KO2 in the oxygen electrode, as well its long-term stability. The electrochemical growth of KO2 on the cathode is correlated with the rate performance and capacity. Increasing the surface area and reducing the O2 diffusion pathway are identified as critical strategies to improve the rate performance and capacity. Li–O2 and Na–O2 batteries are further compared with the K–O2 chemistry regarding their pros and cons. Because only KO2 is thermodynamically stable at room temperature, K–O2 batteries offer reversible cathode reactions over the long-term while the counterparts undergo disproportionation. The parasitic reactions due to the reactivity of superoxide are discussed. With the trace side products quantified, the overall superoxide electrochemistry is highly reversible with an extended shelf life. Lastly, potential anode substitutes for K–O2 batteries are reviewed, including the K3Sb alloy and liquid Na–K alloy. We conclude with perspectives on the future development of the K metal anode interface, as well as the electrolyte and cathode materials to enable improved reversibility and maximized power capability. We hope this Account promotes further endeavors into the development of the K–O2 chemistry and related material technologies for superoxide battery research.


  • Simultaneous Stabilization of Potassium Metal and Superoxide in K–O2 Batteries on the Basis of Electrolyte Reactivity

    by Neng Xiao, Gerald Gourdin, Yiying Wu

    In superoxide batteries based on O2/O2− redox chemistry, identifying an electrolyte to stabilize both the alkali metal and its superoxide remains challenging owing to their reactivity towards the electrolyte components. Bis(fluorosulfonyl)imide (FSI−) has been recognized as a “magic anion” for passivating alkali metals. The KFSI–dimethoxyethane electrolyte passivates the potassium metal anode by cleavage of S−F bonds and the formation of a KF‐rich solid–electrolyte interphase (SEI). However, the KFSI salt is chemically unstable owing to nucleophilic attack by superoxide and/or hydroxide species. On the other hand, potassium bis(trifluorosulfonyl)imide (KTFSI) is stable to KO2, but results in mossy potassium deposits and irreversible plating and stripping. To circumvent this dilemma, we developed an artificial SEI for the metal anode and thus long‐cycle‐life K–O2 batteries. This study will guide the development of stable electrolytes and artificial SEIs for metal–O2 batteries.


  • Simultaneous Stabilization of Potassium Metal and Superoxide in K–O2 Batteries on the Basis of Electrolyte Reactivity

    by Neng Xiao, Gerald Gourdin, Yiying Wu

    In superoxide batteries based on O2/O2− redox chemistry, identifying an electrolyte to stabilize both the alkali metal and its superoxide remains challenging owing to their reactivity towards the electrolyte components. Bis(fluorosulfonyl)imide (FSI−) has been recognized as a “magic anion” for passivating alkali metals. The KFSI–dimethoxyethane electrolyte passivates the potassium metal anode by cleavage of S−F bonds and the formation of a KF‐rich solid–electrolyte interphase (SEI). However, the KFSI salt is chemically unstable owing to nucleophilic attack by superoxide and/or hydroxide species. On the other hand, potassium bis(trifluorosulfonyl)imide (KTFSI) is stable to KO2, but results in mossy potassium deposits and irreversible plating and stripping. To circumvent this dilemma, we developed an artificial SEI for the metal anode and thus long‐cycle‐life K–O2 batteries. This study will guide the development of stable electrolytes and artificial SEIs for metal–O2 batteries.