Bo Zhou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Bo Zhou has a total of 47 co-authors. Here are the top co-authors by number of shared publications:
Chunli Huang
Beijing Institute of Technology, Beijing, China
5 shared publications- Huikai Xie
Beijing Institute of Technology
5 shared publications - Yifan Li
School of Integrated Circuits and Electronics, Beijing Institute of Technology, Beijing, China
5 shared publications Xukun Wang
Beijing Institute of Technology, Beijing, China
4 shared publications- Zhihua Wang
Tsinghua University
4 shared publications - Chen Wang
Beijing Institute of Technology, Beijing, China
3 shared publications
Latest Publications
- Open Access
- 1 May 2026
- Published by MDPI AG in Electronics
- Vol. 15 (9) , 1918
A Semi-Open-Loop, High-Robust Preamplifier for Hall Sensor with Optimized Transconductance Match
A low-cost, high-robust, high-gain preamplifier is fabricated in a 65 nm CMOS for Hall sensors. A semi-open loop that combines an optimized differential–difference amplifier with a simplified open-loop amplifier is proposed to achieve stringent transconductance matching, with the same DC and AC conditions. A two-stage reconfigurable structure, together with an embedded offset-accumulation elimination scheme, relieves open-loop stress and achieves both high fidelity and accurate gain. The experimental results show that the preamplifier has a variable gain of 34.6–46.6 dB and a gain error no more than 0.12% under process/voltage/temperature variations and without error calibration, at the cost of an active area of 0.076 mm2 and a current dissipation of 0.7 mA under a 2.5–3.3 V supply. Specifically, both the loop topology and the transconductance match are different from the existing works.
- 1 May 2026
- Published by MDPI AG in Electronics
- Vol. 15 (9) , 1918
Open AccessA Semi-Open-Loop, High-Robust Preamplifier for Hall Sensor with Optimized Transconductance Match
A low-cost, high-robust, high-gain preamplifier is fabricated in a 65 nm CMOS for Hall sensors. A semi-open loop that combines an optimized differential–difference amplifier with a simplified open-loop amplifier is proposed to achieve stringent transconductance matching, with the same DC and AC conditions. A two-stage reconfigurable structure, together with an embedded offset-accumulation elimination scheme, relieves open-loop stress and achieves both high fidelity and accurate gain. The experimental results show that the preamplifier has a variable gain of 34.6–46.6 dB and a gain error no more than 0.12% under process/voltage/temperature variations and without error calibration, at the cost of an active area of 0.076 mm2 and a current dissipation of 0.7 mA under a 2.5–3.3 V supply. Specifically, both the loop topology and the transconductance match are different from the existing works.
- 11 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-9
A High-Sensitivity Thermal-Based Integrated Sensor System With a Low-Noise Chopper-Stabilized CCIA Using Customized CMOS-MEMS Process
This paper presents a high-sensitivity CMOS-MEMS thermal-based integrated sensor system for flow rate sensing, which integrates thermopile detectors and a low-noise capacitively-coupled instrumentation amplifier (CCIA) interface circuit. To enhance sensor performance, we propose a custom post-CMOS fabrication process that utilizes the metal-2 layer as a hard mask, enabling self-alignment patterning and suspended film thinning. This fabrication method improves both sensitivity and power efficiency. The thermal detector is designed using high Seebeck-coefficient materials (n+/p+ polysilicon) within the CMOS fabrication process, incorporating a series connection of 32 pairs of thermocouples to further enhance sensitivity. To optimize integration and minimize chip size, a hybrid ASIC amplification circuit is incorporated for system-level analysis. The CCIA circuit employs chopper modulation to effectively suppress DC offset and flicker noise, while a high-gain two-stage operational amplifier (op-amp) ensures precise closed-loop gain control. Experimental results demonstrate that the proposed system achieves an ultra-high sensitivity of 3.42 mV/(m/s)/mW, a detection limit of 2.49 mm/s, a rapid response time of 3 ms. These results highlight the potential of the proposed sensor system for high-precision, portable flow sensing applications.
- 11 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-9
A High-Sensitivity Thermal-Based Integrated Sensor System With a Low-Noise Chopper-Stabilized CCIA Using Customized CMOS-MEMS Process
This paper presents a high-sensitivity CMOS-MEMS thermal-based integrated sensor system for flow rate sensing, which integrates thermopile detectors and a low-noise capacitively-coupled instrumentation amplifier (CCIA) interface circuit. To enhance sensor performance, we propose a custom post-CMOS fabrication process that utilizes the metal-2 layer as a hard mask, enabling self-alignment patterning and suspended film thinning. This fabrication method improves both sensitivity and power efficiency. The thermal detector is designed using high Seebeck-coefficient materials (n+/p+ polysilicon) within the CMOS fabrication process, incorporating a series connection of 32 pairs of thermocouples to further enhance sensitivity. To optimize integration and minimize chip size, a hybrid ASIC amplification circuit is incorporated for system-level analysis. The CCIA circuit employs chopper modulation to effectively suppress DC offset and flicker noise, while a high-gain two-stage operational amplifier (op-amp) ensures precise closed-loop gain control. Experimental results demonstrate that the proposed system achieves an ultra-high sensitivity of 3.42 mV/(m/s)/mW, a detection limit of 2.49 mm/s, a rapid response time of 3 ms. These results highlight the potential of the proposed sensor system for high-precision, portable flow sensing applications.
- 6 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 35 (8) , 1246-1249
A High-Fidelity Two-Point Transmitter With Small-Sized Loop Filter and Low-Cost Quadrature Divider
A full-integrated two-point transmitter with 1-Mb/s Gaussian-frequency-shift-keying (GFSK) modulation is fabricated in 65-nm CMOS. Both a small-sized loop filter (LF) based on cascaded capacitor multiplier and an ultralow-cost radio frequency (RF) quadrature divider based on cross-coupling self-biased tristate gates, are proposed, which are fully different from the existing designs. Various linearization mechanisms are utilized in the transmitter sub-modules to ensure high fidelity. Experimental results show that the presented work accomplishes an error vector magnitude (EVM) of 1.94%, an output power up to 1.9 dBm and the out-of-band phase noise (PN) of −124 dBc/Hz at 1-MHz offset frequency, with the power dissipation of 3.75 mW from a 1.2-V supply and an active area of 0.51 mm2.
- 6 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 35 (8) , 1246-1249
A High-Fidelity Two-Point Transmitter With Small-Sized Loop Filter and Low-Cost Quadrature Divider
A full-integrated two-point transmitter with 1-Mb/s Gaussian-frequency-shift-keying (GFSK) modulation is fabricated in 65-nm CMOS. Both a small-sized loop filter (LF) based on cascaded capacitor multiplier and an ultralow-cost radio frequency (RF) quadrature divider based on cross-coupling self-biased tristate gates, are proposed, which are fully different from the existing designs. Various linearization mechanisms are utilized in the transmitter sub-modules to ensure high fidelity. Experimental results show that the presented work accomplishes an error vector magnitude (EVM) of 1.94%, an output power up to 1.9 dBm and the out-of-band phase noise (PN) of −124 dBc/Hz at 1-MHz offset frequency, with the power dissipation of 3.75 mW from a 1.2-V supply and an active area of 0.51 mm2.
- 17 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 35 (7) , 1073-1076
Low-Complexity DC-Offset-Cancellation Mechanism for 1-Mbps FM-UWB Receiver
A frequency-modulated ultrawideband (FM-UWB) receiver (RX) is fabricated in 65-nm CMOS, to feature high energy efficiency, high robustness, and low complexity. Both the offset-insensitive RF front end and the offset-immune intermediate-frequency (IF) module are proposed for the DCoffset elimination of FM-UWB RXs. The active-balun embedded low-noise amplifier (LNA), symmetric-detuning bandpass filters (BPFs), single-ended envelope detectors (ENV-DETs), and self-biased IF amplifiers contribute to offset cancellation and distortion suppression and thus benefit high sensitivity and linearity. Digitally reconfigurable switched-capacitor arrays ensure design robustness. Experimental results show that the 3.75–4.25-GHz RX achieves a sensitivity of −81 dBm, a noise figure (NF) of4.0dB, and an energy efficiency of 1.8 nJ/bit, with an active area of 0.65 mm2 and a power dissipation of 1.8 mW from a 1-V supply at a data rate (DR) of 1.0 Mbps.
- 17 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 35 (7) , 1073-1076
Low-Complexity DC-Offset-Cancellation Mechanism for 1-Mbps FM-UWB Receiver
A frequency-modulated ultrawideband (FM-UWB) receiver (RX) is fabricated in 65-nm CMOS, to feature high energy efficiency, high robustness, and low complexity. Both the offset-insensitive RF front end and the offset-immune intermediate-frequency (IF) module are proposed for the DCoffset elimination of FM-UWB RXs. The active-balun embedded low-noise amplifier (LNA), symmetric-detuning bandpass filters (BPFs), single-ended envelope detectors (ENV-DETs), and self-biased IF amplifiers contribute to offset cancellation and distortion suppression and thus benefit high sensitivity and linearity. Digitally reconfigurable switched-capacitor arrays ensure design robustness. Experimental results show that the 3.75–4.25-GHz RX achieves a sensitivity of −81 dBm, a noise figure (NF) of4.0dB, and an energy efficiency of 1.8 nJ/bit, with an active area of 0.65 mm2 and a power dissipation of 1.8 mW from a 1-V supply at a data rate (DR) of 1.0 Mbps.
- Open Access
- 11 April 2025
- Published by MDPI AG in Electronics
- Vol. 14 (8) , 1549
A High-Efficiency Frequency Multiplier with Triangular-Resistance Phase Interpolation
A high-efficiency frequency multiplier is presented in 65-nm CMOS with a core area of 0.06 mm2. A low-cost five-segment triangular-resistance phase interpolation scheme is proposed. By performing resistive interpolation on four-path orthogonal triangular signals, 10-fold frequency multiplication is achieved within the input frequency range of 12–20 MHz. The prototype only includes a quadrature square-wave generator, four orthogonal square-triangular converters and the proposed four-path 5-segment triangular-resistance phase interpolators, with a frequency deviation less than 7%. The presented design achieves an output power of −9.8 dBm, with an input power of −2.0 dBm and power consumption of 0.45 mW from a 1.2-V supply, which obtains a frequency multiplication efficiency up to 9.6%. The proposed mechanism could be extended to accomplish a configurable multiplication factor.
- 11 April 2025
- Published by MDPI AG in Electronics
- Vol. 14 (8) , 1549
Open AccessA High-Efficiency Frequency Multiplier with Triangular-Resistance Phase Interpolation
A high-efficiency frequency multiplier is presented in 65-nm CMOS with a core area of 0.06 mm2. A low-cost five-segment triangular-resistance phase interpolation scheme is proposed. By performing resistive interpolation on four-path orthogonal triangular signals, 10-fold frequency multiplication is achieved within the input frequency range of 12–20 MHz. The prototype only includes a quadrature square-wave generator, four orthogonal square-triangular converters and the proposed four-path 5-segment triangular-resistance phase interpolators, with a frequency deviation less than 7%. The presented design achieves an output power of −9.8 dBm, with an input power of −2.0 dBm and power consumption of 0.45 mW from a 1.2-V supply, which obtains a frequency multiplication efficiency up to 9.6%. The proposed mechanism could be extended to accomplish a configurable multiplication factor.
- 8 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 35 (6) , 734-737
A High-Robust Low-IF Bluetooth Receiver With Noise Suppression and Offset Elimination Schemes
A low-intermediate-frequency (low-IF) Bluetooth receiver (RX) is fabricated in 65-nm CMOS, and noise suppression and offset elimination are highly focused. The low-noise amplifier (LNA) has a noise-cancellation feature with opposite polarities. By using offset-immunity schemes, double-balanced quadrature mixer and high-robust complex filter suppress image interferences and I/Q imbalances. Low-complexity dc offset compensation (DCOC) units attenuate noises and offsets of IF modules. Experimental results show that the proposed RX has an active area of 1.2 mm2 and a power dissipation of 6 mW from a 1.2-V supply. The prototype RX also achieves a noise figure (NF) of 4 dB and a sensitivity of −96 dBm under a 0.5-MHz IF and 1-Mb/s data rate (DR).
- 8 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 35 (6) , 734-737
A High-Robust Low-IF Bluetooth Receiver With Noise Suppression and Offset Elimination Schemes
A low-intermediate-frequency (low-IF) Bluetooth receiver (RX) is fabricated in 65-nm CMOS, and noise suppression and offset elimination are highly focused. The low-noise amplifier (LNA) has a noise-cancellation feature with opposite polarities. By using offset-immunity schemes, double-balanced quadrature mixer and high-robust complex filter suppress image interferences and I/Q imbalances. Low-complexity dc offset compensation (DCOC) units attenuate noises and offsets of IF modules. Experimental results show that the proposed RX has an active area of 1.2 mm2 and a power dissipation of 6 mW from a 1.2-V supply. The prototype RX also achieves a noise figure (NF) of 4 dB and a sensitivity of −96 dBm under a 0.5-MHz IF and 1-Mb/s data rate (DR).
- 10 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Solid-State Circuits Letters
- Vol. 8, 77-80
A Bi-Directional Near-Ground Current Sensor With Reconfigurable Unidirectional Gains
A bi-directional near-ground-output low-side-input current-sensing amplifier (CSA) is fabricated in 65-nm CMOS. Two negative-feedback paths drive dual PMOS transistors to conduct an auto-switching bi-directional current detection with configurable unidirectional gains, which reduces the conventional switching-point distortions and doubles the sensing accuracy. A DC shifter based on a negative-feedback loop, avoids an input large current to benefit the sensing linearity, and optimizes the common-mode rejection ratio (CMRR). Various noise and offset suppression mechanisms are also utilized. Experimental results show that the proposed CSA achieves an offset voltage of 1.58μ V, a noise level of 37.5 nV/Hz, and a CMRR up to 159 dB, with the power dissipation of 0.36 mW from a 1-V supply and an active area of 0.19 mm2. Reconfigurable or different unidirectional gains and near-ground input / output voltages are achieved, which are different from the existing designs.
- 10 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Solid-State Circuits Letters
- Vol. 8, 77-80
A Bi-Directional Near-Ground Current Sensor With Reconfigurable Unidirectional Gains
A bi-directional near-ground-output low-side-input current-sensing amplifier (CSA) is fabricated in 65-nm CMOS. Two negative-feedback paths drive dual PMOS transistors to conduct an auto-switching bi-directional current detection with configurable unidirectional gains, which reduces the conventional switching-point distortions and doubles the sensing accuracy. A DC shifter based on a negative-feedback loop, avoids an input large current to benefit the sensing linearity, and optimizes the common-mode rejection ratio (CMRR). Various noise and offset suppression mechanisms are also utilized. Experimental results show that the proposed CSA achieves an offset voltage of 1.58μ V, a noise level of 37.5 nV/Hz, and a CMRR up to 159 dB, with the power dissipation of 0.36 mW from a 1-V supply and an active area of 0.19 mm2. Reconfigurable or different unidirectional gains and near-ground input / output voltages are achieved, which are different from the existing designs.
- 3 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (9) , 12488-12498
A High-Efficiency Dual-Mode DC–DC Converter With a Low-Cost Seamless Transition Scheme
A low-complexity pulsewidth modulation/ pulse skipping modulation (PWM/PSM) dual-mode buck dc–dc converter is proposed. The converter operates in PWM with a 1.5-MHz switching frequency in heavy load scenarios and switches to PSM with a sliding switching frequency under light load conditions, ensuring a high efficiency over a wide load range. Based on peak current mode control, only one simple voltage detector is required to regulate the converter for different loads, which significantly reduces the circuit complexity for a seamless mode transition. Fabricated in 180-nm BCD technology, the total chip area is less than 0.28 mm2 and the quiescent current is lower than 90 μA. The converter achieves the efficiencies up to 93.65% for PWM scheme and more than 80.61% in PSM mode, respectively, with the input voltage of 4.0–5.5 V and the load current up to 1.2 A. Additionally, the presented design achieves a line regulation less than 0.18% and a load regulation lower than 0.98%, and also accomplishes a voltage variation of 3.49%/A for load current transient response and gets an attractive figure of merit.
- 3 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (9) , 12488-12498
A High-Efficiency Dual-Mode DC–DC Converter With a Low-Cost Seamless Transition Scheme
A low-complexity pulsewidth modulation/ pulse skipping modulation (PWM/PSM) dual-mode buck dc–dc converter is proposed. The converter operates in PWM with a 1.5-MHz switching frequency in heavy load scenarios and switches to PSM with a sliding switching frequency under light load conditions, ensuring a high efficiency over a wide load range. Based on peak current mode control, only one simple voltage detector is required to regulate the converter for different loads, which significantly reduces the circuit complexity for a seamless mode transition. Fabricated in 180-nm BCD technology, the total chip area is less than 0.28 mm2 and the quiescent current is lower than 90 μA. The converter achieves the efficiencies up to 93.65% for PWM scheme and more than 80.61% in PSM mode, respectively, with the input voltage of 4.0–5.5 V and the load current up to 1.2 A. Additionally, the presented design achieves a line regulation less than 0.18% and a load regulation lower than 0.98%, and also accomplishes a voltage variation of 3.49%/A for load current transient response and gets an attractive figure of merit.
- Open Access
- 26 February 2025
- Published by MDPI AG in Preprints.org
A High-Efficiency Frequency Multiplier with Triangular-Resistance Phase Interpolation
A high-efficiency frequency multiplier is presented in 65-nm CMOS with a core area of 0.06 mm2. A low-cost five-segment triangular-resistance phase interpolation scheme is proposed. By performing resistive interpolation on four-path orthogonal triangular signals, 10-fold frequency multiplication is achieved within the input frequency range of 12-20 MHz. The prototype only includes a quadrature square-wave generator, four orthogonal square-triangular converters, and the proposed four-path five-segment triangular-resistance phase interpolators, with the acceptable frequency deviation. The presented design achieves an output power of -9.8 dBm, with an input power of -2.0 dBm and the power consumption of 0.45 mW from a 1.2-V supply, which obtains a frequency multiplication efficiency up to 9.6%. The proposed mechanism could be extended to accomplish a configurable multiplication factor.
- 26 February 2025
- Published by MDPI AG in Preprints.org
Open AccessA High-Efficiency Frequency Multiplier with Triangular-Resistance Phase Interpolation
A high-efficiency frequency multiplier is presented in 65-nm CMOS with a core area of 0.06 mm2. A low-cost five-segment triangular-resistance phase interpolation scheme is proposed. By performing resistive interpolation on four-path orthogonal triangular signals, 10-fold frequency multiplication is achieved within the input frequency range of 12-20 MHz. The prototype only includes a quadrature square-wave generator, four orthogonal square-triangular converters, and the proposed four-path five-segment triangular-resistance phase interpolators, with the acceptable frequency deviation. The presented design achieves an output power of -9.8 dBm, with an input power of -2.0 dBm and the power consumption of 0.45 mW from a 1.2-V supply, which obtains a frequency multiplication efficiency up to 9.6%. The proposed mechanism could be extended to accomplish a configurable multiplication factor.
- 25 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 72 (5) , 648-652
A 1-Mbps 0.7-nJ/Bit Low-Complexity High-Robust FM-UWB Transmitter Under a Sub-1-V Supply
A frequency-modulated ultra-wide-band (FM-UWB) transmitter is fabricated in 65-nm CMOS, to feature high data rate, high energy efficiency, low complexity, and high robustness. A dual-modulus divider with duty-cycle correction and a square-to-triangular converter with a common-mode feedback unit, are for subcarrier generation. A dual-path ring current-controlled oscillator is for linear FM, and followed by a high-robust small-sized power amplifier. An all-digital automatic frequency control loop calibrates the carrier frequency. Experimental results show that the 3.75-4.25 GHz transmitter generates an FCC-compliant UWB signal, and has an energy efficiency of 0.7 nJ/bit under a data rate of 1 Mbps and a sub-1-V supply, with an active area of 0.14 mm2 and phase noise of –77 dBc/Hz at 1-MHz offset, as well as an output power of -14.3 dBm. Especially, both the subcarrier generator and the PA are different from the existing literature.
- 25 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 72 (5) , 648-652
A 1-Mbps 0.7-nJ/Bit Low-Complexity High-Robust FM-UWB Transmitter Under a Sub-1-V Supply
A frequency-modulated ultra-wide-band (FM-UWB) transmitter is fabricated in 65-nm CMOS, to feature high data rate, high energy efficiency, low complexity, and high robustness. A dual-modulus divider with duty-cycle correction and a square-to-triangular converter with a common-mode feedback unit, are for subcarrier generation. A dual-path ring current-controlled oscillator is for linear FM, and followed by a high-robust small-sized power amplifier. An all-digital automatic frequency control loop calibrates the carrier frequency. Experimental results show that the 3.75-4.25 GHz transmitter generates an FCC-compliant UWB signal, and has an energy efficiency of 0.7 nJ/bit under a data rate of 1 Mbps and a sub-1-V supply, with an active area of 0.14 mm2 and phase noise of –77 dBc/Hz at 1-MHz offset, as well as an output power of -14.3 dBm. Especially, both the subcarrier generator and the PA are different from the existing literature.