JNJianwei Nai

Jianwei Nai

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jianwei Nai has a total of 223 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Ligand-engineered layered solid–liquid interfaces enable fast and selective ion transport

    by Qiangqiang Qiao, Shaowei Li, Bing Liu, Shuai Li, Shihui Zou, Peng Shi, Yujing Liu, Huadong Yuan, Jianmin Luo, Yao Wang, et al.

    Ion transport behaviors are central to ion separation, micro-/nano-fluidics, and interfacial catalysis, yet achieving high ion transport rate and selectivity remains challenging in nonaqueous systems. Here, we propose a unique solid–liquid cooperative interface built from a layered cyano-bridged metal framework (CMF) and nonaqueous solvents to simultaneously increase cation (Li+) conductivity (9.5 mS·cm−1) and transport selectivity (~ 0.9). Mechanistic analysis based on theoretical calculations, supported by electrochemical measurements, shows that the nonaqueous solvents can work as functional interfacial ligands at the surface of layered CMFs, including outer-layer solvent ligands (OSLs) and interlayer solvent ligands (ISLs), which can restructure the interfacial Li+ migration environment and salt speciation. It is found that OSLs with higher polarity symmetry would interact more strongly with the unsaturated metal sites on the CMF’s surface, thereby promoting coordination competition at the interface, accelerating solvation-renewal dynamics, and increasing the Li+ transport rate. ISLs with higher polarity symmetry could stabilize a low-curvature surface of CMF, strengthen anion anchoring at the unsaturated metal sites, increase selectivity for Li+ transport, and further improve overall Li+ transport rate. Therefore, we provide a potential strategy to construct a unique solid–liquid interface using CMF solids and rationally designed interfacial solvent ligands to promote the ion transport behaviors.

  • Open Access

    Regulating sodium deposition and interfacial chemistry via sulfur-embedded carbon spheres enables high-power Ah-level sodium-metal batteries

    by Jianmin Luo, Aodong Wang, Yiming Zhou, Baiheng Li, Ke Wang, Wei Li, Yile Ding, Zihao Zhang, Yujing Liu, Yao Wang, et al.

  • Host–Guest Engineering for Advanced Batteries

    by Qiangqiang Qiao, Ziang Ren, Shuai Li, Binghui Yu, Fan Gu, Shihui Zou, Peng Shi, Yujing Liu, Huadong Yuan, Jianmin Luo, et al.

    The performance of advanced batteries is governed not only by the intrinsic properties of electrodes and electrolytes, but also by the dynamic states of ionic, molecular, and reactive species during operation. Conventional materials‐centered strategies, however, often provide insufficient molecular‐level control over these local and transient states, limiting precise regulation of ion association, solvation/desolvation, interfacial transfer, and reaction‐intermediate conversion. Host–guest engineering offers a molecular design strategy to address this challenge by selectively recognizing, coordinating, confining, or redistributing target guests within defined host environments. This Review organizes host–guest engineering across liquid electrolytes, solid‐state and quasi‐solid‐state electrolytes, electrode–electrolyte interfaces, and solid–liquid conversion cathodes, and compares how different host environments regulate transport, interfacial chemistry, and conversion processes. A cross‐scenario quantitative comparison further links molecular‐level regulation with battery performance. Across these scenarios, effective regulation is shown to require an appropriate balance between guest‐regulation effectiveness and guest‐dynamic flexibility rather than simply maximizing binding or confinement. Finally, future opportunities are discussed in integrated host architectures, broader battery systems, adaptive host environments, and the quantitative determination of process‐specific host–guest interaction windows.

  • Ultrastable Lithium Metal Batteries Enabled by the Fluorinated Li/Electrolyte Interphase with High Mechanical Strength

    by Shaowei Li, Peiyu Wang, Chenglong Li, Yiqun Wu, Yao Wang, Peng Shi, Shihui Zou, Yujing Liu, Jianwei Nai, Jianmin Luo, et al.

    A rationally designed solid-electrolyte interphase (SEI) is critical for enabling a high mechanical modulus, low mass transfer resistance, and uniform, rapid ion transport in lithium metal batteries. Herein, we report a promising artificial SEI layer fabricated by coating fluorinated hydroxyapatite on the commercially available polypropylene separator. Fluorination reaction for hydroxyapatite greatly improves its Young’s modulus, physically suppressing Li dendrite growth. More importantly, the uniformly coated nanoscale fluorinated hydroxyapatite with a solid−solid nanoporous network enables efficient Li-ion transport during Li plating/stripping and F− release, which not only endows the formed SEI with local outer regions of ordered laminar Li2O as revealed by cryo-transmission electron microscopy but also effectively promotes the formation of a stable LiF-rich inner layer. The obtained double-deck SEI, with high mechanical strength, suppresses SEI fracture during repeated cycles, promotes uniform Li-ion flux, and stabilizes the Li/electrolyte interface. As a result, Li anodes based on this fluorinated hydroxyapatite exhibit an ultrastable cycling life over 1200 h with a capacity of 3 mAh cm−2 at a current density of 3 mA cm−2. When coupled with a LiFePO4 cathode, the obtained full cell shows a high capacity retention of 96% after 600 cycles.

  • Efficient ammonia decomposition for hydrogen production using a highly active CoNi-based catalyst by exsolution of Sr-promoted perovskite

    by Kewei Ma, Mengyao Zhao, Yue Yu, Xinyi Liang, Qi Xia, Zihan Lin, Jianwei Nai, Weiya Jin, Chen Chen

    Utilizing renewable energy is essential for reducing carbon emissions.

  • Mechanistic insights into enhanced Li + transport driven by Hf–O orbital hybridization in Hf-based oxychloride solid electrolytes

    by Rongkai Huang, Ziang Ren, Shihui Zou, Peng Shi, Huadong Yuan, Jianmin Luo, Yujing Liu, Jianwei Nai, Yao Wang, Xinyong Tao

    O 2− incorporation increases Li + concentration, strengthens Hf–O orbital hybridization, induces favorable local structural evolution, and thereby enhances ionic conductivity.

  • Polymerization‐Initiator Engineering Enables High‐Voltage‐Stable Gel Polymer Electrolytes for Lithium Metal Batteries

    by Junxiao Ye, Ke Wang, Luoting Zhou, Yiming Zhou, Baiheng Li, Wei Li, Xiaoyu Wang, Ying Xu, Jiaao Wang, Zihao Zhang, et al.

    In situ polymerized gel polymer electrolytes (GPEs) have attracted much attention due to their high ionic conductivity and excellent interfacial contact. Among this type of GPEs, poly(1,3‐dioxane) (PDOX)‐based composite GPEs have emerged as a promising candidate for high‐energy‐density lithium metal batteries (LMBs) owing to their superior oxidative stability. However, uncontrolled lithium dendrite growth at the PDOX electrolyte/anode interface compromises interfacial stability and long‐term cycling durability. Here, indium trifluoromethanesulfonate (In(OTf) 3 ) is introduced as a bifunctional initiator to trigger the in situ polymerization of 1,3‐dioxane (DOX) to form a GPE. Meanwhile, it also yields a robust solid electrolyte interphase (SEI) enriched with Li x In alloy and LiF, generating a stable lithophilic and highly Li + ‐conductive interfacial layer that effectively suppresses lithium dendrite growth. As a result, the obtained PDOX electrolyte exhibits excellent stability, maintaining stable operation for over 1600 h at 1.0 mA cm −2 in a Li||Li symmetric cell. When paired with high‐voltage cathodes, the Li||NCM523 cells deliver a remarkable capacity retention of 82.5% after 500 cycles at 1 C. Importantly, an Ah‐level Li||NCM712 pouch cell delivers 402 Wh kg −1 energy density and demonstrates 99.3% capacity retention over 100 cycles, showcasing the potential of this GPE for practical applications.


  • Open Access

    Synergistic Cation–Anion Engineering Enables Yttrium Chlorobromide Superionic Conductors for High‐Performance All‐Solid‐State Lithium Metal Batteries

    by Chenglong Li, Shaowei Li, Zihao Zhang, Qibin Xie, Yile Ding, Yiqun Wu, Yao Wang, Peng Shi, Shihui Zou, Yujing Liu, et al.

    Halide solid‐state electrolytes (HSSEs) deliver greater chemical stability, a wider electrochemical stability window, but lower room‐temperature ionic conductivities than existing sulfide solid‐state electrolytes. Herein, we report a novel HSSE, Li 2.5 Y 0.75 W 0.25 Cl 3.5 Br 2.5 , featuring synergetic anion–cation chemistry that enhances ionic conductivity and interfacial stability. The substitution of Br − at halide sites within Li 3 YCl 6 framework induces a space group transformation that expands the Li‐ion transport channels. Concurrently, the incorporation of W 5+ effectively generates cation vacancies and induces a cationic polarization effect, thereby reducing the energy barrier for Li‐ion migration. The resulting Li 2.5 Y 0.75 W 0.25 Cl 3.5 Br 2.5 achieves a high room‐temperature ionic conductivity of 6.38 mS cm −1 with a low activation energy of 0.22 eV. More importantly, the reaction products of WO 3 at the LiNi 0.8 Mn 0.1 Co 0.1 O 2 /Li 2.5 Y 0.75 W 0.25 Cl 3.5 Br 2.5 interface not only reduce the total interface energy but also significantly suppress oxygen release and enhance interfacial stability during cycling. Consequently, all‐solid‐state full cells paired with a LiNi 0.8 Mn 0.1 Co 0.1 O 2 cathode demonstrate long‐term cycling stability, with a high initial discharge capacity of 169.40 mAh g −1 at 0.3 C and a retained capacity of 100.14 mAh g −1 after 500 cycles. This work provides new insights into overcoming the performance limitations of HSSEs and holds significant importance for developing highly stable all solid‐state Li metal batteries (ASSLMBs).

  • An Inorganic Layered Coordination Polymer as High‐Performance Solid‐State Electrolyte for Stable Lithium Metal Batteries

    by Shuangyu Song, Qimeng Sheng, Qiangqiang Qiao, Jiale Zheng, Shaowei Li, Zihao Zhang, Jiaao Wang, Binghui Yu, Yao Wang, Peng Shi, et al.

    Limited ionic conductivity, heterogeneous Lithium‐ion flux, and interfacial instability in solid‐state electrolytes (SSEs) hinder the development of high‐energy‐density solid‐state lithium metal batteries (SSLMBs). Herein, we report a new Li + conducting SSE derived from an inorganic coordination polymer, specifically a two‐dimensional Hofmann‐type framework material (HFM). By varying the solvent types used as interlayer guest molecules, we can modulate the interlayer spacing of the HFM. Specifically, when methoxymethane (DME) serves as the guest, it orchestrates highly selective Li + transport pathways within the structure, achieving a high ionic conductivity of 1.51 mS cm −1 . The coordination between metal centers and solvent molecules leads to the reconstruction of the local Li + solvation structure, effectively immobilizing solvent molecules and lowering the energy barriers for the desolvation process. More importantly, a Li 3 N‐rich solid electrolyte interphase forms on the lithium anode, stabilizing the Li–electrolyte interface. As a result, Li||Li symmetric cells demonstrate stable cycling for over 3000 h, while LiFePO 4 ||Li full cells show a capacity retention of 96.3% after 500 cycles at 1C. This work establishes a structurally nanoconfined electrolyte system that bridges ion‐selective nanochannels with a stabilized interphase, offering a promising platform for next‐generation high‐energy‐density SSBs.


  • Tailoring the Work Function of Oxyhalide Solid Electrolytes via Sulfur Doping to Boost High‐Performance All‐Solid‐State Lithium Batteries

    by Rongzeng Jin, Shaowei Li, Yile Ding, Jia‐Ao Wang, Zihao Zhang, Ke Yue, Chenglong Li, Yutong Wang, Yiqun Wu, Chengpu Diao, et al.

    Achieving high ionic conductivity alongside interfacial stability is essential yet challenging for solid‐state electrolytes. Here, we report a sulfur‐doped oxohalide solid‐state electrolyte, LiTaO 0.5 S 0.5 Cl 4 , synthesized via a facile high‐energy ball milling method. Confirmed by the experimental and theoretical simulation results, sulfur incorporation significantly elevates the work function and ionization energy to 4.54 and 8.0 eV, respectively, reducing electron availability for interfacial charge transfer and enhancing oxidative stability against high‐voltage cathodes. In addition, the coexistence of S 2− and O 2− promotes in‐situ formation of a Ta 2 O/TaS 2 composite protective layer, featuring high electronic insulation and low Li + migration barrier. Consequently, the all‐solid‐state Li battery delivers a high‐capacity retention of 75.5% after 500 cycles at 0.5 C using LiNi 0.8 Co 0.1 Mn 0.1 O 2 cathodes. This work demonstrates that anion doping is an effective strategy for concurrently improving ionic conductivity and cathode interfacial stability.