Sudip Dey
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sudip Dey has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Subrata Barman
National Institute of Technology
4 shared publications - Kritesh Kumar Gupta
Amrita School of Artificial Intelligence, Amrita Vishwa Vidyapeetham, Coimbatore, India
2 shared publications - Tanmoy Mukhopadhyay
School of Engineering, University of Southampton, Southampton, UK
2 shared publications - Biswajit Roy
Department of Mechanical Engineering, National Institute of Technology, Silchar 788010, India
1 shared publication - Braion B. de Moura
University of Braslia,Dept. of Mechanical Engineering,Braslia,Brazil
1 shared publication - Divya Zindani
Department of Mechanical Engineering, Sri Sivasubramaniya Nadar College of Engineering, Rajiv Gandhi Salai, OMR, Kalavakkam, Chennai 603110, India
1 shared publication
Latest Publications
- 1 June 2026
- Published by Springer Nature
- p. 309-322
Modulation of Auxeticity of Kirigami-Inspired Programmable Metamaterials
- 1 June 2026
- Published by Springer Nature
- p. 309-322
Modulation of Auxeticity of Kirigami-Inspired Programmable Metamaterials
- 1 June 2026
- Published by Springer Nature
- p. 257-267
Impact of Nanovoid on Mechanical Behavior and Deformation Evolution of AlCoCrFeNi High-Entropy Alloy
- 1 June 2026
- Published by Springer Nature
- p. 257-267
Impact of Nanovoid on Mechanical Behavior and Deformation Evolution of AlCoCrFeNi High-Entropy Alloy
- 1 May 2026
- Published by Springer Nature
- p. 235-248
Tanimoto Pythagorean Fuzzy TODIM Approach for Supplier Selection Problems: A Business Intelligence Perspective
- 1 May 2026
- Published by Springer Nature
- p. 235-248
Tanimoto Pythagorean Fuzzy TODIM Approach for Supplier Selection Problems: A Business Intelligence Perspective
- 23 September 2025
- Published by World Scientific Pub Co Pte Ltd in Journal of Advanced Manufacturing Systems
- p. 1-23
Exploring Stochastic Surface and Structural Characteristics in 3D-Printed Polymer Parts Using a Digital Twin Approach
This study presents a digital twin-based framework that integrates computational modeling, stochastic optimization, and experimental validation to enhance both the surface quality and structural performance of 3D-printed polymer components. A MATLAB-CAD interface was developed for automated geometry generation and STL export, enabling parameterized modeling of sinusoidal surface profiles and internal lattice structures. Surface optimization was achieved using a genetic algorithm (GA), which reduced arithmetic mean roughness (Ra) by nearly 40–60% compared to baseline designs, with profilometric scans validating the uniformity of the GA-tuned surfaces. In parallel, fused filament fabrication (FFF) was employed to fabricate lattice specimens with different infill patterns, and finite element analysis (FEA) was conducted to capture stochastic variations in dimensional accuracy and mechanical behavior. Results confirmed that hexagonal infills consistently achieved higher stiffness-to-weight ratios and more uniform stress distributions compared to rectangular counterparts. The DT model further predicted surface Ra with a mean error below 5% and achieved high accuracy in structural performance with [ ] > 0.95, while optimized printing conditions reduced stochastic variability by nearly 20%. Overall, the findings highlight the effectiveness of combining GA-driven surface optimization, infill design strategies, and DT modeling to improve the reliability, defect prediction, and lightweight potential of polymer additive manufacturing parts.
- 23 September 2025
- Published by World Scientific Pub Co Pte Ltd in Journal of Advanced Manufacturing Systems
- p. 1-23
Exploring Stochastic Surface and Structural Characteristics in 3D-Printed Polymer Parts Using a Digital Twin Approach
This study presents a digital twin-based framework that integrates computational modeling, stochastic optimization, and experimental validation to enhance both the surface quality and structural performance of 3D-printed polymer components. A MATLAB-CAD interface was developed for automated geometry generation and STL export, enabling parameterized modeling of sinusoidal surface profiles and internal lattice structures. Surface optimization was achieved using a genetic algorithm (GA), which reduced arithmetic mean roughness (Ra) by nearly 40–60% compared to baseline designs, with profilometric scans validating the uniformity of the GA-tuned surfaces. In parallel, fused filament fabrication (FFF) was employed to fabricate lattice specimens with different infill patterns, and finite element analysis (FEA) was conducted to capture stochastic variations in dimensional accuracy and mechanical behavior. Results confirmed that hexagonal infills consistently achieved higher stiffness-to-weight ratios and more uniform stress distributions compared to rectangular counterparts. The DT model further predicted surface Ra with a mean error below 5% and achieved high accuracy in structural performance with [ ] > 0.95, while optimized printing conditions reduced stochastic variability by nearly 20%. Overall, the findings highlight the effectiveness of combining GA-driven surface optimization, infill design strategies, and DT modeling to improve the reliability, defect prediction, and lightweight potential of polymer additive manufacturing parts.
- 22 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 25-29
Investigation of Synthetic Inductance for Resonant Shunt Circuit Applied to Vibration Control
Resistive-inductive shunt circuits, also called resonant shunt circuits, are commonly used in conjunction with piezoelectric materials to promote passive vibration control. These circuits work similarly to a band-pass filter, tuning a certain frequency range and dissipating the piezoelectric energy relevant to the tuning. However, there is a problem when there is a need for low-frequency tuning. This problem is caused by the inductive element of the circuit, as there is an inversely proportional relationship between the inductive value and frequency tuning. In other words, to choose to tune a low frequency we will have to use a high-value inductor, which denotes the generation of an electromagnetic field due to the coil which in this aspect is also volumetrically unfeasible for storage in small areas. That said, the present study aims to analyze and compare the use of three synthetic inductance circuits for low-frequency tuning, they are: the Antoniou circuit; the Riodan circuit; and the Gyrator circuit. These inductances were compared in four cases where different resistive values selected the same tuning zone. The results demonstrate that both synthetic inductances showed similar dissipation effects, but in the Gyrator inductance, there was slightly less dissipation for both cases analyzed.
- 22 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 25-29
Investigation of Synthetic Inductance for Resonant Shunt Circuit Applied to Vibration Control
Resistive-inductive shunt circuits, also called resonant shunt circuits, are commonly used in conjunction with piezoelectric materials to promote passive vibration control. These circuits work similarly to a band-pass filter, tuning a certain frequency range and dissipating the piezoelectric energy relevant to the tuning. However, there is a problem when there is a need for low-frequency tuning. This problem is caused by the inductive element of the circuit, as there is an inversely proportional relationship between the inductive value and frequency tuning. In other words, to choose to tune a low frequency we will have to use a high-value inductor, which denotes the generation of an electromagnetic field due to the coil which in this aspect is also volumetrically unfeasible for storage in small areas. That said, the present study aims to analyze and compare the use of three synthetic inductance circuits for low-frequency tuning, they are: the Antoniou circuit; the Riodan circuit; and the Gyrator circuit. These inductances were compared in four cases where different resistive values selected the same tuning zone. The results demonstrate that both synthetic inductances showed similar dissipation effects, but in the Gyrator inductance, there was slightly less dissipation for both cases analyzed.
- 29 February 2024
- Published by World Scientific Pub Co Pte Ltd in Journal of Micromechanics and Molecular Physics
- Vol. 09 (01) , 1-14
Probing atomistic deformation behavior of graphene-coated Al0.3CoCrFeNi high-entropy alloy under nanoindentation
This study employs a series of molecular dynamics (MD) simulations to investigate the atomistic deformation mechanism of graphene (Gr)-coated Al[ ]CoCrFeNi high-entropy alloy (HEA) during nanoindentation. In the elastic region, both substrates exhibit similar indentation performance. However, at greater indentation depths, the Gr-coated HEA offered higher resistance against indentation, leading to a remarkable 78% increase in hardness compared to pristine HEA. The graphene-coated HEA also shows extended unloading time (52.3[ ]ps) compared to the pristine HEA (44.7[ ]ps), indicating improved structural recovery. Importantly, graphene coating raises the critical indentation depth for the emergence of the initial embryonic plastic deformation loop (PDL) from 0.628[ ]nm in pristine HEA to 0.86[ ]nm in the Gr-coated HEA, signifying its hindrance to the elastoplastic transition. Gr coating suppresses dislocation nucleation at first, but eventually stimulates dislocation formation at greater depths, resulting in a higher dislocation density in Gr-coated HEA, which contributes to increased material strength. Additionally, the post-indentation surface morphology of the Gr-coated HEA substrate displays reduced pile-up formation due to the restraining action of the Gr coating. The findings of this study provide a comprehensive understanding of the deformation mechanism in the Gr-coated Al[ ]CoCrFeNi HEA and its potential implications for surface engineering.
- 29 February 2024
- Published by World Scientific Pub Co Pte Ltd in Journal of Micromechanics and Molecular Physics
- Vol. 09 (01) , 1-14
Probing atomistic deformation behavior of graphene-coated Al0.3CoCrFeNi high-entropy alloy under nanoindentation
This study employs a series of molecular dynamics (MD) simulations to investigate the atomistic deformation mechanism of graphene (Gr)-coated Al[ ]CoCrFeNi high-entropy alloy (HEA) during nanoindentation. In the elastic region, both substrates exhibit similar indentation performance. However, at greater indentation depths, the Gr-coated HEA offered higher resistance against indentation, leading to a remarkable 78% increase in hardness compared to pristine HEA. The graphene-coated HEA also shows extended unloading time (52.3[ ]ps) compared to the pristine HEA (44.7[ ]ps), indicating improved structural recovery. Importantly, graphene coating raises the critical indentation depth for the emergence of the initial embryonic plastic deformation loop (PDL) from 0.628[ ]nm in pristine HEA to 0.86[ ]nm in the Gr-coated HEA, signifying its hindrance to the elastoplastic transition. Gr coating suppresses dislocation nucleation at first, but eventually stimulates dislocation formation at greater depths, resulting in a higher dislocation density in Gr-coated HEA, which contributes to increased material strength. Additionally, the post-indentation surface morphology of the Gr-coated HEA substrate displays reduced pile-up formation due to the restraining action of the Gr coating. The findings of this study provide a comprehensive understanding of the deformation mechanism in the Gr-coated Al[ ]CoCrFeNi HEA and its potential implications for surface engineering.
- 20 September 2021
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 143 (10)
Effect of Eccentricity and Surface Roughness on Probabilistic Performance of Two Axial Groove Bearing
This paper presents the effect of eccentricity and surface roughness on the probabilistic performance of two axial groove hydrodynamic journal bearing. In general, it is difficult to quantify experimentally the variabilities involved in dynamic responses of the hydrodynamic bearing due to the randomness involved in surface asperity and eccentricity ratio. The deterministic models available for the analysis of the bearings are not capable to include such uncertainties. Thus, the focus of the study is to quantify such uncertainties on the performance of a two axial grooved journal bearing. To simulate the variabilities of the stochastic variables, Monte Carlo simulation (MCS) is carried out. The steady-state and dynamic coefficients are obtained by solving the Reynolds equation using a surrogate-based finite difference method. The moving least square (MLS) method is used as the surrogate model to increase the computational efficiency of MCS.
- 20 September 2021
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 143 (10)
Effect of Eccentricity and Surface Roughness on Probabilistic Performance of Two Axial Groove Bearing
This paper presents the effect of eccentricity and surface roughness on the probabilistic performance of two axial groove hydrodynamic journal bearing. In general, it is difficult to quantify experimentally the variabilities involved in dynamic responses of the hydrodynamic bearing due to the randomness involved in surface asperity and eccentricity ratio. The deterministic models available for the analysis of the bearings are not capable to include such uncertainties. Thus, the focus of the study is to quantify such uncertainties on the performance of a two axial grooved journal bearing. To simulate the variabilities of the stochastic variables, Monte Carlo simulation (MCS) is carried out. The steady-state and dynamic coefficients are obtained by solving the Reynolds equation using a surrogate-based finite difference method. The moving least square (MLS) method is used as the surrogate model to increase the computational efficiency of MCS.
- Open Access
- 1 February 2020
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1455 (1) , 012026
A Review on Property Reforms for Fiber Matrix Composites through Various Surface Treatment of Fibers
The primary factor that defines the final performance of any composite material is the fiber-matrix interface. Hence, efficient amount of adhesion is needed for full-fledged performance of composite materials. When fibers are used without surface modification, they tend to produce composites with low strength. This in turn leads to weak adhesion and poor bonding between the fiber and matrix. Hence, there is a massive apprehension to alter the surface of fibers through various procedures, in order to overcome their intrinsic downsides and effectively employ these materials in countless applications. This paper deals with a review of prevailing research studies fixated on the surface treatment of fibers.
- 1 February 2020
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1455 (1) , 012026
Open AccessA Review on Property Reforms for Fiber Matrix Composites through Various Surface Treatment of Fibers
The primary factor that defines the final performance of any composite material is the fiber-matrix interface. Hence, efficient amount of adhesion is needed for full-fledged performance of composite materials. When fibers are used without surface modification, they tend to produce composites with low strength. This in turn leads to weak adhesion and poor bonding between the fiber and matrix. Hence, there is a massive apprehension to alter the surface of fibers through various procedures, in order to overcome their intrinsic downsides and effectively employ these materials in countless applications. This paper deals with a review of prevailing research studies fixated on the surface treatment of fibers.
- 18 October 2019
- Published by Springer Nature
- p. 1045-1058
Stochastic Longitudinal Vibration of Single Walled Carbon Nanorods—A Non Local Elasticity Approach
- 18 October 2019
- Published by Springer Nature
- p. 1045-1058
Stochastic Longitudinal Vibration of Single Walled Carbon Nanorods—A Non Local Elasticity Approach
- 13 June 2019
- Published by Springer Nature
- p. 41-53
A Stochastic Investigation of Effect of Temperature on Natural Frequencies of Functionally Graded Plates
- 13 June 2019
- Published by Springer Nature
- p. 41-53
A Stochastic Investigation of Effect of Temperature on Natural Frequencies of Functionally Graded Plates