RCRaghu Vamsi Krishna Chavali

Raghu Vamsi Krishna Chavali

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Raghu Vamsi Krishna Chavali has a total of 39 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Real‐time monitoring and diagnosis of photovoltaic system degradation only using maximum power point—the Suns‐Vmp method

    by Xingshu Sun, Raghu Vamsi Krishna Chavali, Muhammad Ashraful Alam

    The uncertainties associated with technology‐specific and geography‐specific degradation rates make it difficult to calculate the levelized cost of energy, and thus the economic viability of solar energy. In this regard, millions of fielded photovoltaic modules may serve as a global testbed, where we can interpret the routinely collected time series maximum power point (MPP) data to assess the time‐dependent “health” of solar modules. The existing characterization methods, however, cannot effectively mine/decode these datasets to identify various degradation pathways. In this paper, we propose a new methodology called the Suns‐Vmp method, which offers a simple yet powerful approach to monitoring and diagnosing time‐dependent degradation of solar modules by using the MPP data. The algorithm reconstructs “IV” curves by using the natural illumination‐dependent and temperature‐dependent daily MPP characteristics as constraints to fit physics‐based circuit models. These synthetic IV characteristics are then used to determine the time‐dependent evolution of circuit parameters (eg, series resistance), which in turn allows one to deduce the dominant degradation modes (eg, solder bond failure) of solar modules. The proposed method has been applied to a test facility at the National Renewable Energy Laboratory. Our analysis indicates that the solar modules degraded at a rate of ~0.7%/year because of discoloration and weakened solder bonds. These conclusions are validated by independent outdoor IV measurements and on‐site imaging characterization. Integrated with physics‐based degradation models or machine learning algorithms, the method can also serve to predict the lifetime of photovoltaic systems.


  • Device physics underlying silicon heterojunction and passivating‐contact solar cells: A topical review

    by Raghu V. K. Chavali, Stefaan De Wolf, Muhammad A. Alam

    The device physics of commercially dominant diffused‐junction silicon solar cells is well understood, allowing sophisticated optimization of this class of devices. Recently, so‐called passivating‐contact solar cell technologies have become prominent, with Kaneka setting the world's silicon solar cell efficiency record of 26.63% using silicon heterojunction contacts in an interdigitated configuration. Although passivating‐contact solar cells are remarkably efficient, their underlying device physics is not yet completely understood, not in the least because they are constructed from diverse materials that may introduce electronic barriers in the current flow. To bridge this gap in understanding, we explore the device physics of passivating contact silicon heterojunction (SHJ) solar cells. Here, we identify the key properties of heterojunctions that affect cell efficiency, analyze the dependence of key heterojunction properties on carrier transport under light and dark conditions, provide a self‐consistent multiprobe approach to extract heterojunction parameters using several characterization techniques (including dark J‐V, light J‐V, C‐V, admittance spectroscopy, and Suns‐Voc), propose design guidelines to address bottlenecks in energy production in SHJ cells, and develop a process‐to‐module modeling framework to establish the module's performance limits. We expect that our proposed guidelines resulting from this multiscale and self‐consistent framework will improve the performance of future SHJ cells as well as other passivating contact‐based solar cells.


  • Real-time Monitoring of Photo Voltaic Reliability Only Using Maximum Power Point - the Suns-Vmp Method

    by Xingshu Sun, Haejun Chung, Raghu Vamsi Krishna Chavali, Peter Bermel, Muhammad Ashraful Alam

    Millions of solar panels have been deployed around the world for electricity production. Meanwhile, these solar panels are routinely generating a massive amount of streaming data of current and voltage as they operate at the maximum power point (MPP). The existing characterization methods, however, cannot effectively mine and decode these datasets to provide useful insights of the degradation for solar panels. In this paper, we propose the new Suns-Vmp methodology, which offers a degradation-agnostic approach to monitoring and diagnosing the reliability of solar panel in real time by physically interpreting the MPP data. The physics-based method reconstructs “IV” curves based on MPP characteristics under varying illumination and temperature, from which time-series circuit parameters can be extracted using equivalent circuits. The proposed method has been applied to analyze the data obtained from an NREL test facility. Our Suns-Vmp based analysis indicates that the solar panels have failed within nine years with a rate of ~3 %/year, mostly likely due to yellowing/delamination of EVA and contact corrosion. Integrated with degradation models or machine learning, the method can also serve to predict the lifetime of PV systems.


  • Open Access

    A Generalized Theory Explains the Anomalous Suns– $V_{{\rm{oc}}}$ Response of Si Heterojunction Solar Cells

    by Raghu Vamsi Krishna Chavali, Jian V. Li, Corsin Battaglia, Stefaan De Wolf, Jeffery Lynn Gray, Muhammad Ashraful Alam

    Suns-V oc measurements exclude parasitic series resistance effects and are, therefore, frequently used to study the intrinsic potential of a given photovoltaic technology. However, when applied to a-Si/c-Si heterojunction (SHJ) solar cells, the Suns-V oc curves often feature a peculiar turnaround at high illumination intensities. Generally, this turn-around is attributed to extrinsic Schottky contacts that should disappear with process improvement. In this paper, we demonstrate that this voltage turnaround may be an intrinsic feature of SHJ solar cells, arising from the heterojunction (HJ), as well as its associated carrier-transport barriers, inherent to SHJ devices. We use numerical simulations to explore the full current-voltage (J-V) characteristics under different illumination and ambient temperature conditions. Using these characteristics, we establish the voltage and illumination-intensity bias, as well as temperature conditions necessary to observe the voltage turnaround in these cells. We validate our turnaround hypothesis using an extensive set of experiments on a high-efficiency SHJ solar cell and a molybdenum oxide (MoO x ) based hole collector HJ solar cell. Our work consolidates Suns-V oc as a powerful characterization tool for extracting the cell parameters that limit efficiency in HJ devices.


  • Physics-Based computational modeling of moisture ingress in solar modules: Location-specific corrosion and delamination

    by Reza Asadpour, Raghu Vamsi Krishna Chavali, Muhammad Ashraful Alam

    The long term reliability of solar modules is an important criterion to drive down the levelized costs of PV systems. However, the on-site degradation due to moisture ingress in solar modules still plagues majority of current solar modules and ultimately results in loss of power output or complete failure of modules. Understanding the physics of failure mechanism and predicting the module lifetime under operating conditions is crucial to developing strategies to mitigate such degradation. Towards that goal, we developed a detailed physics-based computational modeling framework to predict the module lifetime based on real-time environmental and test conditions. Specifically, this versatile framework is used to address two degradation mechanisms associated to moisture ingress, namely, corrosion and delamination. Our use of the model to predict performance degradation in Arizona and Florida are in general agreement with field data.


  • A novel approach to thermal design of solar modules: Selective-spectral and radiative cooling

    by Xingshu Sun, Rajiv Dubey, Shashwata Chattopadhyay, Mohammad Ryyan Khan, Raghu Vamsi Chavali, Timothy J. Silverman, Anil Kottantharayil, Juzer Vasi, Muhammad Ashraful Alam

    For commercial solar modules, up to 80% of the incoming sunlight may be dissipated as heat, potentially raising the temperature 20–30°C higher than the ambient. In the long run, extreme self-heating may erode efficiency and shorten lifetime, thereby, dramatically reducing the total energy output by almost ∼10% Therefore, it is critically important to develop effective and practical cooling methods to combat PV self-heating. In this paper, we explore two fundamental sources of PV self-heating, namely, sub-bandgap absorption and imperfect thermal radiation. The analysis suggests that we redesign the optical and thermal properties of the solar module to eliminate the parasitic absorption (selective-spectral cooling) and enhance the thermal emission to the cold cosmos (radiative cooling). The proposed technique should cool the module by ∼10°C, to be reflected in significant long-term energy gain (∼ 3% to 8% over 25 years) for PV systems under different climatic conditions.


  • A Framework for Process-to-Module Modeling of a-Si/c-Si (HIT) Heterojunction Solar Cells to Investigate the Cell-to-Module Efficiency Gap

    by Raghu Vamsi Krishna Chavali, Eric C. Johlin, Jeffery Lynn Gray, Tonio Buonassisi, Muhammad Ashraful Alam

    The cell-to-module efficiency gap observed in a-Si/c-Si heterojunction solar cells is a key challenge to the broad adoption of this technology. To systematically address this issue, we describe an end-to-end modeling framework to explore the implications of process and device variations at the module level. First, a process model is developed to connect the a-Si deposition parameters to the material properties. Next, a physics-based device model is presented; the model uses the thermionic emission/diffusion theory to capture the essential features of photocurrent and diode injection current. Using the process and device models, the effects of process conditions on cell performance are explored. Finally, the performance of the module, as a function of device and process parameters, is explored to establish the cell-to-module efficiency gap. The insights developed through this process-to-module modeling framework will help close the cell-to-module efficiency gap of this commercially promising technology.


  • Bifacial Si heterojunction-perovskite organic-inorganic tandem to produce highly efficient (ηT* ∼ 33%) solar cell

    by Reza Asadpour, Raghu V. K. Chavali, M. Ryyan Khan, Muhammad A. Alam

    As single junction photovoltaic (PV) technologies, both Si heterojunction (HIT) and perovskite based solar cells promise high efficiencies at low cost. Intuitively, a traditional tandem cell design with these cells connected in series is expected to improve the efficiency further. Using a self-consistent numerical modeling of optical and transport characteristics, however, we find that a traditional series connected tandem design suffers from low JSC due to band-gap mismatch and current matching constraints. Specifically, a traditional tandem cell with state-of-the-art HIT (η=24%) and perovskite (η=20%) sub-cells provides only a modest tandem efficiency of ηT∼ 25%. Instead, we demonstrate that a bifacial HIT/perovskite tandem design decouples the optoelectronic constraints and provides an innovative path for extraordinary efficiencies. In the bifacial configuration, the same state-of-the-art sub-cells achieve a normalized output of ηT* = 33%, exceeding the bifacial HIT performance at practical albedo reflections. Unlike the traditional design, this bifacial design is relatively insensitive to perovskite thickness variations, which may translate to simpler manufacture and higher yield.


  • Open Access

    Process-to-panel modeling of a-Si/c-Si heterojunction solar cells

    by Raghu V. K. Chavali, Eric C. Johlin, Jeffery L. Gray, Tonio Buonassisi, Muhammad A. Alam

    The cell-to-panel efficiency gap observed in a-Si/c-Si heterojunction solar cells is one of the key challenges of this technology. To systematically address this issue, we describe an end-to-end modeling framework to explore the implications of process and device variation at the module level. First, a process model is developed to connect the a-Si deposition parameters to the device parameters. Next, a physics based device model is presented which captures the essential features of photo-current and diode injection current using the thermionic-diffusion theory. Using the process and device models, the effects of process conditions on cell performance are explored. Finally, the performance of the panel as a function of device and process parameters is explored to establish panel limits. The insights developed through this process-to-panel modeling framework will improve the understanding of the cell-to-panel efficiency gap of this commercially promising cell technology.

  • The Frozen Potential Approach to Separate the Photocurrent and Diode Injection Current in Solar Cells

    by Raghu Vamsi Krishna Chavali, James E. Moore, Xufeng Wang, Muhammad Ashraful Alam, Mark S. Lundstrom, Jeffery Lynn Gray

    The principle of superposition is commonly utilized in the analysis of current transport under dark and light conditions for several different types of solar cells. However, this principle assumes that the photocurrent is voltage independent and that the diode injection current is generation independent, which restricts its validity. Indeed, the superposition principle cannot be applied to most thin-film solar cells because the above mentioned assumptions are not generally valid. In order to address this issue, a novel numerical modeling approach is described that allows independent computation of the photocurrent and of the diode injection current as components of the total current under illumination. Then, using several test cases, where the principle of superposition breaks down, the usefulness of this modeling approach is demonstrated.