Sunnam Kim
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Sunnam Kim has a total of 57 co-authors. Here are the top co-authors by number of shared publications:
Seiji Kurihara
Division of Materials Science and Chemistry, Faculty of Advanced Science and Technology
9 shared publications- Seiji Kurihara
Department of Applied Chemistry and Biochemistry, Graduate School of Science and Technology, Kumamoto University, Kumamoto, Japan
9 shared publications Tomonari Ogata
Department of Materials Science and Applied Chemistry, Kumamoto University, 2-39-1 Kurokami, Chuo-ku, Kumamoto 860-8555, Japan
7 shared publications- Tuyoshi Fukaminato
Faculty of Advanced Science and Technology, Kumamoto University, Kumamoto 860-8555, Japan
6 shared publications - Takamasa Nonaka
Department of Applied Chemistry and Biochemistry, Faculty of Engineering, Kumamoto University, Kurokami 2‐39‐1, Kumamoto 860‐8555, Japan
3 shared publications - Tomonari Ogata
Department of Applied Chemistry and Biochemistry , Graduate School of Science and Technology, Kumamoto University , Kumamoto, Japan
3 shared publications
Latest Publications
- 1 October 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (40) , 27455-27460
pH-Responsive Morphological Transitions of Azobenzene-Phospholipid Vesicles
PH-responsive vesicles are promising candidates for passive cancer targeting. These vesicles were constructed from two push-pull azobenzene-containing phospholipids with different substituents, one of which incorporates a pH-sensitive piperazine linker. The amphiphilic molecules self-assemble into spherical bilayer vesicles via π-π stacking, with their morphologies governed by the orientational order of the azobenzene moieties. Mixing the two components facilitates spherical vesicle formation by introducing orientational defects that promote curvature. Under mildly acidic conditions (pH ∼6), protonation of the piperazine group enhances the hydrophilicity of the responsive component, leading to its depletion from the membrane and a consequent shift in composition. This compositional change induces a morphological transition toward a planar bilayer, thermodynamically stabilized by the increased orientational order of the remaining azobenzene units. Such a distinct shape change in response to slight pH variation highlights the potential of these vesicles as smart drug delivery carriers.
- 1 October 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (40) , 27455-27460
pH-Responsive Morphological Transitions of Azobenzene-Phospholipid Vesicles
PH-responsive vesicles are promising candidates for passive cancer targeting. These vesicles were constructed from two push-pull azobenzene-containing phospholipids with different substituents, one of which incorporates a pH-sensitive piperazine linker. The amphiphilic molecules self-assemble into spherical bilayer vesicles via π-π stacking, with their morphologies governed by the orientational order of the azobenzene moieties. Mixing the two components facilitates spherical vesicle formation by introducing orientational defects that promote curvature. Under mildly acidic conditions (pH ∼6), protonation of the piperazine group enhances the hydrophilicity of the responsive component, leading to its depletion from the membrane and a consequent shift in composition. This compositional change induces a morphological transition toward a planar bilayer, thermodynamically stabilized by the increased orientational order of the remaining azobenzene units. Such a distinct shape change in response to slight pH variation highlights the potential of these vesicles as smart drug delivery carriers.
- 4 June 2024
- Published by American Chemical Society (ACS) in ACS Applied Optical Materials
- Vol. 2 (6) , 1172-1179
Multicolor Display Constructed by Combining Structural and Dye Colors
- 4 June 2024
- Published by American Chemical Society (ACS) in ACS Applied Optical Materials
- Vol. 2 (6) , 1172-1179
Multicolor Display Constructed by Combining Structural and Dye Colors
- 23 March 2024
- Published by American Chemical Society (ACS) in ACS Applied Engineering Materials
- Vol. 2 (4) , 1122-1130
Design and Synthesis of a Black Photochromic Diarylethene for Bioinspired Display Applications
- 23 March 2024
- Published by American Chemical Society (ACS) in ACS Applied Engineering Materials
- Vol. 2 (4) , 1122-1130
Design and Synthesis of a Black Photochromic Diarylethene for Bioinspired Display Applications
- 20 December 2023
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 128 (1) , 273-279
Internal Heavy-Atom Effect on Visible-Light-Induced Cyclization Reaction in Diarylethene–Perylenebisimide Dyads
All-visible-light switchable diarylethene-perylenebisimide (DAE-PBI) dyads having bromine heavy atoms in the molecule were designed and synthesized. Very recently, we found a unique visible-light-induced cyclization reaction in a DAE-PBI dyad. The dyad exhibited reversible cyclization and cycloreversion reactions upon alternate irradiation with green (500-550 nm) and red (>600 nm) light. From the experimental results, it was suggested that the triplet state of DAE unit was generated via multiplicity conversion based on intramolecular energy transfer from the singlet excited state of PBI unit and that the cyclization reaction of DAE unit proceeded from the triplet state. In addition, it was revealed that the reactivity remarkably increased in a solvent containing heavy atoms such as carbon tetrachloride and iodoethane (i.e., external heavy-atom effect). Based on such results, in this study, we attempted to design and synthesize novel DAE-PBI dyads introducing bromine heavy atoms at different positions in the molecule. The synthesized dyads exhibited higher quantum yields of photocyclization reaction under visible-light irradiation even in a heavy-atom-free solvent compared to the previous dyad having no heavy atoms. The magnitude of enhancement well correlated to the contribution ratio of atomic orbital of bromine to the molecular orbital in LUMOs. These results indicated that the internal heavy atom effectively contributed to the visible-light-induced cyclization reaction in DAE-PBI dyads. Such an internal heavy-atom effect will pave the way for new molecular design to develop all-visible-light-activatable molecular switches.
- 20 December 2023
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 128 (1) , 273-279
Internal Heavy-Atom Effect on Visible-Light-Induced Cyclization Reaction in Diarylethene–Perylenebisimide Dyads
All-visible-light switchable diarylethene-perylenebisimide (DAE-PBI) dyads having bromine heavy atoms in the molecule were designed and synthesized. Very recently, we found a unique visible-light-induced cyclization reaction in a DAE-PBI dyad. The dyad exhibited reversible cyclization and cycloreversion reactions upon alternate irradiation with green (500-550 nm) and red (>600 nm) light. From the experimental results, it was suggested that the triplet state of DAE unit was generated via multiplicity conversion based on intramolecular energy transfer from the singlet excited state of PBI unit and that the cyclization reaction of DAE unit proceeded from the triplet state. In addition, it was revealed that the reactivity remarkably increased in a solvent containing heavy atoms such as carbon tetrachloride and iodoethane (i.e., external heavy-atom effect). Based on such results, in this study, we attempted to design and synthesize novel DAE-PBI dyads introducing bromine heavy atoms at different positions in the molecule. The synthesized dyads exhibited higher quantum yields of photocyclization reaction under visible-light irradiation even in a heavy-atom-free solvent compared to the previous dyad having no heavy atoms. The magnitude of enhancement well correlated to the contribution ratio of atomic orbital of bromine to the molecular orbital in LUMOs. These results indicated that the internal heavy atom effectively contributed to the visible-light-induced cyclization reaction in DAE-PBI dyads. Such an internal heavy-atom effect will pave the way for new molecular design to develop all-visible-light-activatable molecular switches.
- 6 September 2023
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 140 (46)
Water‐soluble hyperbranched polymer with high curcumin content
Curcumin is one of the promising anticancer drugs but has the problems of poor water solubility and rapid degradation in aqueous solution. In this study, a hyperbranched curcumin polymer having many carboxylic end groups is synthesized. The polymer is highly water‐soluble and contains a high amount of curcumins. Remarkable improvement of stability toward degradation and aggregation in aqueous solution is achieved. Its cellular uptake and cytotoxicity are also confirmed.
- 6 September 2023
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 140 (46)
Water‐soluble hyperbranched polymer with high curcumin content
Curcumin is one of the promising anticancer drugs but has the problems of poor water solubility and rapid degradation in aqueous solution. In this study, a hyperbranched curcumin polymer having many carboxylic end groups is synthesized. The polymer is highly water‐soluble and contains a high amount of curcumins. Remarkable improvement of stability toward degradation and aggregation in aqueous solution is achieved. Its cellular uptake and cytotoxicity are also confirmed.
- 5 August 2022
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 13 (32) , 7429-7436
All-Visible (>500 nm)-Light-Induced Diarylethene Photochromism Based on Multiplicity Conversion via Intramolecular Energy Transfer
Photoswitching molecules that reversibly switch upon visible-light irradiation are some of the most attractive targets for biological and imaging applications. In this study, we found a diarylethene (DAE) derivative having a covalently attached perylenebisimide (PBI) unit (DAE-PBI dyad) underwent an unexpected cyclization reaction upon irradiation with green (500-550 nm) light, where the DAE unit has no absorbance. The photoreactivity was enhanced in solvents containing heavy atoms and in the presence of oxygen. As inferred from the solvent dependence and the calculated excited-state energies of DAE and PBI units, it was suggested that the probable mechanism for this unique visible-light-induced cyclization reaction is multiplicity conversion based on intramolecular energy transfer from the excited singlet state of the PBI unit to the triplet state of DAE units (i.e., DAE-1[PBI]* → 3[DAE]*-PBI). Such a unique photoreaction mechanism with the assistance of oxygen will pave the way for new molecular design for the development of visible-light switching molecules.
- 5 August 2022
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 13 (32) , 7429-7436
All-Visible (>500 nm)-Light-Induced Diarylethene Photochromism Based on Multiplicity Conversion via Intramolecular Energy Transfer
Photoswitching molecules that reversibly switch upon visible-light irradiation are some of the most attractive targets for biological and imaging applications. In this study, we found a diarylethene (DAE) derivative having a covalently attached perylenebisimide (PBI) unit (DAE-PBI dyad) underwent an unexpected cyclization reaction upon irradiation with green (500-550 nm) light, where the DAE unit has no absorbance. The photoreactivity was enhanced in solvents containing heavy atoms and in the presence of oxygen. As inferred from the solvent dependence and the calculated excited-state energies of DAE and PBI units, it was suggested that the probable mechanism for this unique visible-light-induced cyclization reaction is multiplicity conversion based on intramolecular energy transfer from the excited singlet state of the PBI unit to the triplet state of DAE units (i.e., DAE-1[PBI]* → 3[DAE]*-PBI). Such a unique photoreaction mechanism with the assistance of oxygen will pave the way for new molecular design for the development of visible-light switching molecules.
- Open Access
- 11 February 2022
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 7 (7) , 6093-6098
Photochemical OFF/ON Cytotoxicity Switching by Using a Photochromic Surfactant with Visible Light Irradiation
Photochemical switching of cytotoxicity by using spiropyran compounds with pyridinium and alkyl groups was investigated. The spiropyran compound, SP6, with a hexyl group as the alkyl group displayed negative photochromism, in which the hydrophilic open merocyanine form (MC form) was stable and isomerized to the hydrophobic closed spiro form (SP form) by visible light irradiation. Both MC and SP forms exhibited amphiphilicity because of the hydrophobic hexyl and hydrophilic pyridinium groups introduced. Cytotoxicity toward HeLa cells was observed for both MC and SP forms of SP6 at concentrations higher than the critical aggregation concentration of the isomers CACMC and CACSP (CACMC > CACSP), respectively. In contrast, cytotoxicity by SP6 was activated by visible light irradiation at concentrations between CACMC and CACSP; thus, photochemical switching of cytotoxicity from the OFF to ON state was achieved. Cytotoxicity was revealed to be caused by disruption of the cell membrane. The results provide an important step in developing novel next-generation photochemotherapy drugs.
- 11 February 2022
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 7 (7) , 6093-6098
Open AccessPhotochemical OFF/ON Cytotoxicity Switching by Using a Photochromic Surfactant with Visible Light Irradiation
Photochemical switching of cytotoxicity by using spiropyran compounds with pyridinium and alkyl groups was investigated. The spiropyran compound, SP6, with a hexyl group as the alkyl group displayed negative photochromism, in which the hydrophilic open merocyanine form (MC form) was stable and isomerized to the hydrophobic closed spiro form (SP form) by visible light irradiation. Both MC and SP forms exhibited amphiphilicity because of the hydrophobic hexyl and hydrophilic pyridinium groups introduced. Cytotoxicity toward HeLa cells was observed for both MC and SP forms of SP6 at concentrations higher than the critical aggregation concentration of the isomers CACMC and CACSP (CACMC > CACSP), respectively. In contrast, cytotoxicity by SP6 was activated by visible light irradiation at concentrations between CACMC and CACSP; thus, photochemical switching of cytotoxicity from the OFF to ON state was achieved. Cytotoxicity was revealed to be caused by disruption of the cell membrane. The results provide an important step in developing novel next-generation photochemotherapy drugs.
- Open Access
- 26 May 2021
- Published by The Royal Society in Royal Society Open Science
- Vol. 8 (5)
Adsorption and release on three-dimensional graphene oxide network structures
In this study, three-dimensional network architectures are constructed using nano-sized graphene oxide (nGO) as the building block. The cross-linking reaction of nGO is conducted in sub-micrometre water droplets in an emulsion system to control the size of the networks by restricting the reaction space. Two types of three-dimensional GO networks with different cross-linking lengths were constructed, and their methyl orange adsorption and release behaviours were investigated under external stimuli, such as thermal treatment, ultrasonic wave treatment and near-infrared light irradiation.
- 26 May 2021
- Published by The Royal Society in Royal Society Open Science
- Vol. 8 (5)
Open AccessAdsorption and release on three-dimensional graphene oxide network structures
In this study, three-dimensional network architectures are constructed using nano-sized graphene oxide (nGO) as the building block. The cross-linking reaction of nGO is conducted in sub-micrometre water droplets in an emulsion system to control the size of the networks by restricting the reaction space. Two types of three-dimensional GO networks with different cross-linking lengths were constructed, and their methyl orange adsorption and release behaviours were investigated under external stimuli, such as thermal treatment, ultrasonic wave treatment and near-infrared light irradiation.
- Open Access
- 4 September 2020
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 10 (54) , 32984-32991
Self-assembly of photoresponsive azo-containing phospholipids with a polar group as the tail
Vesicles or micelles prepared from amphiphiles with azobenzene (Az) moieties and long alkyl chains have attracted much attention in drug delivery systems. To induce release behavior from smart carriers via trans–cis photoisomerization of the Az groups, UV light exposure is typically used, but it can damage DNA and hardly penetrates cells. In this paper, Az-containing phospholipids without long alkyl tails were designed and synthesized; in these compounds, the end group of the Az moiety was substituted with a –NO2 and –OCH3 group (abbreviated N6 and M6, respectively). N6 self-assembled into H-aggregates with an interdigitated bilayered structure in water through the antiparallel orientation due to π–π interactions of the Az group, the attractive van der Waals forces, and the interactions and bending behavior of the phosphocholine groups. Vesicles showing visible light stimuli-responsive behavior were obtained by mixing N6 and M6, and the release of encapsulated calcein was triggered by visible light.
- 4 September 2020
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 10 (54) , 32984-32991
Open AccessSelf-assembly of photoresponsive azo-containing phospholipids with a polar group as the tail
Vesicles or micelles prepared from amphiphiles with azobenzene (Az) moieties and long alkyl chains have attracted much attention in drug delivery systems. To induce release behavior from smart carriers via trans–cis photoisomerization of the Az groups, UV light exposure is typically used, but it can damage DNA and hardly penetrates cells. In this paper, Az-containing phospholipids without long alkyl tails were designed and synthesized; in these compounds, the end group of the Az moiety was substituted with a –NO2 and –OCH3 group (abbreviated N6 and M6, respectively). N6 self-assembled into H-aggregates with an interdigitated bilayered structure in water through the antiparallel orientation due to π–π interactions of the Az group, the attractive van der Waals forces, and the interactions and bending behavior of the phosphocholine groups. Vesicles showing visible light stimuli-responsive behavior were obtained by mixing N6 and M6, and the release of encapsulated calcein was triggered by visible light.
- Open Access
Photochemical On–Off Switching of One-Dimensional Photonic Crystals Consisting of Azo-Functionalized Liquid Crystal Polymer and Polyvinyl Alcohol
One-dimensional (1D) photonic crystals (PCs) are prepared from multi-bilayered films stacked with alternating azo-functionalized liquid crystal polymer (PAz) films and polyvinyl alcohol (PVA) films. Reflection with a wavelength that depends on the thickness of the films is observed, and the reflection can be turned on and off by switching between the two states, based on whether there is a difference in the refractive index between the two films. The refractive index change of PAz can be photochemically caused by a phase transition, based on the alignment states of the liquid crystal (LC). In this review, we focused on an effective photo-induced on–off switching approach in 1D PCs using LC properties and described the basic optical and chemical principles, the experimental results, and further optimizations.
Open AccessPhotochemical On–Off Switching of One-Dimensional Photonic Crystals Consisting of Azo-Functionalized Liquid Crystal Polymer and Polyvinyl Alcohol
One-dimensional (1D) photonic crystals (PCs) are prepared from multi-bilayered films stacked with alternating azo-functionalized liquid crystal polymer (PAz) films and polyvinyl alcohol (PVA) films. Reflection with a wavelength that depends on the thickness of the films is observed, and the reflection can be turned on and off by switching between the two states, based on whether there is a difference in the refractive index between the two films. The refractive index change of PAz can be photochemically caused by a phase transition, based on the alignment states of the liquid crystal (LC). In this review, we focused on an effective photo-induced on–off switching approach in 1D PCs using LC properties and described the basic optical and chemical principles, the experimental results, and further optimizations.