Oleg Synyuk
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Oleg Synyuk has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Mykola Skyba2 shared publications
- Volodymyr Onofriichuk
Khmelnytskyi National University
2 shared publications - Борис Злотенко
Kyiv National University of Technologies and Design
2 shared publications - Dmytro Kovalenko
O.M. Beketov National University of Urban Economy in Kharkiv
1 shared publication Dmytro Prybeha
Khmelnytskyi National University, Department of Technology and Design of Garments, 11, Instytutska str., Khmelnytskyi, 29016, Ukraine
1 shared publicationH. Kapinos
Хмельницький національний університет
1 shared publication
Latest Publications
- Open Access
- 28 August 2026
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 4 (8 (142)) , 67-75
Determining the power distribution of photovoltaic modules in multitracker photovoltaic systems
The process that generates the output power of a photovoltaic system depending on the orientation of parallel strings has been considered in this work. The task addressed relates to the lack of simulation models for investigating multitracker photovoltaic stations that could make it possible to study their operation and compile recommendations to modernize photovoltaic stations and convert them into multitrackers for more efficient utilization of available area that is not facing south. This paper analyzes the influence of photovoltaic module characteristics when changing the level of illumination on the overall efficiency of the photovoltaic array in a solar multitracker station. The study was performed using the MATLAB software package (USA), which made it possible to quantitatively assess the level of mutual influence of the parameters of photovoltaic modules on the photovoltaic array power. By means of simulation modeling, it was established that multitracker photovoltaic systems have an advantage over monotracker ones during the morning and evening operation; specifically, the advantage is up to 32%. It is also shown that during the daytime, the multitracker system is on average 12–15% inferior to the monotracker system in terms of power. The results are attributed to the more efficient use of photovoltaic modules in the system, which are distributed at optimal angles. A feature of the photovoltaic system modeling in this study is the exclusion of the DC converter, so the findings give a more accurate idea about the position of the system’s operating point. The results make it possible to compile recommendations for multitracker photovoltaic stations for more efficient utilization of the available area that is not facing south and the use of the full power of station’s MPPT (Maximum Power Point Tracking) controllers
- 28 August 2026
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 4 (8 (142)) , 67-75
Open AccessDetermining the power distribution of photovoltaic modules in multitracker photovoltaic systems
The process that generates the output power of a photovoltaic system depending on the orientation of parallel strings has been considered in this work. The task addressed relates to the lack of simulation models for investigating multitracker photovoltaic stations that could make it possible to study their operation and compile recommendations to modernize photovoltaic stations and convert them into multitrackers for more efficient utilization of available area that is not facing south. This paper analyzes the influence of photovoltaic module characteristics when changing the level of illumination on the overall efficiency of the photovoltaic array in a solar multitracker station. The study was performed using the MATLAB software package (USA), which made it possible to quantitatively assess the level of mutual influence of the parameters of photovoltaic modules on the photovoltaic array power. By means of simulation modeling, it was established that multitracker photovoltaic systems have an advantage over monotracker ones during the morning and evening operation; specifically, the advantage is up to 32%. It is also shown that during the daytime, the multitracker system is on average 12–15% inferior to the monotracker system in terms of power. The results are attributed to the more efficient use of photovoltaic modules in the system, which are distributed at optimal angles. A feature of the photovoltaic system modeling in this study is the exclusion of the DC converter, so the findings give a more accurate idea about the position of the system’s operating point. The results make it possible to compile recommendations for multitracker photovoltaic stations for more efficient utilization of the available area that is not facing south and the use of the full power of station’s MPPT (Maximum Power Point Tracking) controllers
- Open Access
- 26 May 2026
- Published by Ternopil Ivan Puluj National Technical University in Scientific journal of the Ternopil national technical university
- Vol. 122 (2) , 130-140
Experimental study of the cavitation impregnation process of textile materials
The paper investigates the efficiency of the cavitation method for impregnating textile materials and compares it with the conventional immersion method. The relevance of the study is обусловлена by the need to improve the efficiency of textile impregnation processes using special substances while preserving the structural and mechanical properties of the materials. Particular attention is paid to the influence of ultrasonic cavitation on the intensification of mass transfer processes within the porous-capillary structure of textile materials. The research employed an experimental comparative method involving the determination of the weight characteristics of samples before impregnation, after impregnation, and after excess liquid drainage. The process efficiency was evaluated using the impregnation coefficient, percentage weight gain, liquid retention index, and impregnation rate. Experimental studies were carried out using an ultrasonic cavitation unit operating at a frequency of 40 kHz. The results of the study showed that the cavitation method increases the impregnation coefficient by an average of 6.9% compared to the conventional immersion method. An increase in the penetration rate of impregnating substances into the material structure and an improvement in the material’s ability to retain the working liquid were also observed. Experimental results confirmed that, under rationally selected ultrasonic treatment conditions, no significant damage to the fiber structure of the textile material occurs. The scientific novelty of the work lies in the development of a comprehensive approach to the quantitative evaluation of the efficiency of cavitation impregnation of textile materials using integral indicators of impregnation and liquid retention. In addition, the regularities of the influence of ultrasonic cavitation on the intensification of mass transfer processes in the structure of textile materials were established. The practical significance of the obtained results lies in the possibility of applying cavitation impregnation to hard-to-impregnate textile materials, particularly in the production of flame-resistant products, protective workwear, and technical textiles. The proposed approach makes it possible to reduce the duration of the technological process and improve impregnation efficiency without deteriorating the operational characteristics of the material.
- 26 May 2026
- Published by Ternopil Ivan Puluj National Technical University in Scientific journal of the Ternopil national technical university
- Vol. 122 (2) , 130-140
Open AccessExperimental study of the cavitation impregnation process of textile materials
The paper investigates the efficiency of the cavitation method for impregnating textile materials and compares it with the conventional immersion method. The relevance of the study is обусловлена by the need to improve the efficiency of textile impregnation processes using special substances while preserving the structural and mechanical properties of the materials. Particular attention is paid to the influence of ultrasonic cavitation on the intensification of mass transfer processes within the porous-capillary structure of textile materials. The research employed an experimental comparative method involving the determination of the weight characteristics of samples before impregnation, after impregnation, and after excess liquid drainage. The process efficiency was evaluated using the impregnation coefficient, percentage weight gain, liquid retention index, and impregnation rate. Experimental studies were carried out using an ultrasonic cavitation unit operating at a frequency of 40 kHz. The results of the study showed that the cavitation method increases the impregnation coefficient by an average of 6.9% compared to the conventional immersion method. An increase in the penetration rate of impregnating substances into the material structure and an improvement in the material’s ability to retain the working liquid were also observed. Experimental results confirmed that, under rationally selected ultrasonic treatment conditions, no significant damage to the fiber structure of the textile material occurs. The scientific novelty of the work lies in the development of a comprehensive approach to the quantitative evaluation of the efficiency of cavitation impregnation of textile materials using integral indicators of impregnation and liquid retention. In addition, the regularities of the influence of ultrasonic cavitation on the intensification of mass transfer processes in the structure of textile materials were established. The practical significance of the obtained results lies in the possibility of applying cavitation impregnation to hard-to-impregnate textile materials, particularly in the production of flame-resistant products, protective workwear, and technical textiles. The proposed approach makes it possible to reduce the duration of the technological process and improve impregnation efficiency without deteriorating the operational characteristics of the material.
- Open Access
- 1 January 2023
- Published by Technical University of Liberec in Fibres and Textiles
- Vol. 30 (3) , 19-30
INVESTIGATION OF THE RESISTANCE OF DIFFERENT TEXTILE PRINTS TO WASHING AND ABRASION
The article presents the next stage of experimental studies applying images to textile materials. The method of calculating the cost of manufacturing thermal transfer according to the proposed technologies, which were obtained as a result of the practical activity of the authors of the article in production conditions, was tested. The operational, and functional properties of thermal transfers have been studied. Durability of printed fabrics to rubbing and washing has been established. The images were applied to synthetic and natural fabrics. The methods of printing were as follows: DTF printing, offset and screen printing. The application of the results of this study will allow to carry out a qualitative and effective assessment of methods of printing images on textile materials depending on the production conditions for each type of product. A practical test of the proposed method of printing images on the products of the author's collection of women's clothing was carried out.
- 1 January 2023
- Published by Technical University of Liberec in Fibres and Textiles
- Vol. 30 (3) , 19-30
Open AccessINVESTIGATION OF THE RESISTANCE OF DIFFERENT TEXTILE PRINTS TO WASHING AND ABRASION
The article presents the next stage of experimental studies applying images to textile materials. The method of calculating the cost of manufacturing thermal transfer according to the proposed technologies, which were obtained as a result of the practical activity of the authors of the article in production conditions, was tested. The operational, and functional properties of thermal transfers have been studied. Durability of printed fabrics to rubbing and washing has been established. The images were applied to synthetic and natural fabrics. The methods of printing were as follows: DTF printing, offset and screen printing. The application of the results of this study will allow to carry out a qualitative and effective assessment of methods of printing images on textile materials depending on the production conditions for each type of product. A practical test of the proposed method of printing images on the products of the author's collection of women's clothing was carried out.
- 29 December 2022
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 315 (6(1))
USE OF ENERGY-SAVING TECHNOLOGIES IN HIGHER EDUCATION INSTITUTIONS
The article examines the requirements for the creation of an autonomous university, considers alternative measures to solve energy saving problems, shows the effectiveness and necessity of conducting an energy audit of the institution, indicates the actions performed by Khmelnytskyi National University in the framework of energy saving. The methodology for evaluating the effectiveness of measures is similar to the calculation of current energy consumption and energy consumption for the previous representative period. The difference is that when evaluating energy-saving measures, it is necessary to predict how the situation will change after their implementation. This entails a change in many coefficients, such as the rate of energy consumption, the power utilization coefficient, the duration of equipment operation during the year. To save energy, Khmelnytskyi National University built its own boiler house with a capacity of 3,900 kW, which made it possible to disconnect several buildings from the city-wide heat supply network. Solar power plants were put into operation, solar panels were placed on the roofs of the buildings of the educational institution, educational and production bases, sports complex The implementation of the latest technologies for the production and consumption of energy resources, as well as technologies involving the use of alternative energy sources, is possible on the basis of a previously conducted comprehensive energy audit. The feasibility of building an autonomous heating system, which made it possible to disconnect the main buildings from the city-wide heat supply network, has been proven. Taking measures to insulate walls, replace the water supply system, and use heating points increases the energy efficiency of resource use. In addition, the introduction of alternative energy systems, the creation of own solar power plants and modern control systems for them allows you to optimize lighting costs per hectare, reduce costs for electricity needs, and even make money from sales using the “green tariff”. In this way, any higher educational institution can organize and conduct its own measures to increase the energy-efficient consumption of energy resources, conduct information campaigns, involving students and teachers. This will not only improve the energy situation at the university, but will also help save energy at home.
- 29 December 2022
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 315 (6(1))
USE OF ENERGY-SAVING TECHNOLOGIES IN HIGHER EDUCATION INSTITUTIONS
The article examines the requirements for the creation of an autonomous university, considers alternative measures to solve energy saving problems, shows the effectiveness and necessity of conducting an energy audit of the institution, indicates the actions performed by Khmelnytskyi National University in the framework of energy saving. The methodology for evaluating the effectiveness of measures is similar to the calculation of current energy consumption and energy consumption for the previous representative period. The difference is that when evaluating energy-saving measures, it is necessary to predict how the situation will change after their implementation. This entails a change in many coefficients, such as the rate of energy consumption, the power utilization coefficient, the duration of equipment operation during the year. To save energy, Khmelnytskyi National University built its own boiler house with a capacity of 3,900 kW, which made it possible to disconnect several buildings from the city-wide heat supply network. Solar power plants were put into operation, solar panels were placed on the roofs of the buildings of the educational institution, educational and production bases, sports complex The implementation of the latest technologies for the production and consumption of energy resources, as well as technologies involving the use of alternative energy sources, is possible on the basis of a previously conducted comprehensive energy audit. The feasibility of building an autonomous heating system, which made it possible to disconnect the main buildings from the city-wide heat supply network, has been proven. Taking measures to insulate walls, replace the water supply system, and use heating points increases the energy efficiency of resource use. In addition, the introduction of alternative energy systems, the creation of own solar power plants and modern control systems for them allows you to optimize lighting costs per hectare, reduce costs for electricity needs, and even make money from sales using the “green tariff”. In this way, any higher educational institution can organize and conduct its own measures to increase the energy-efficient consumption of energy resources, conduct information campaigns, involving students and teachers. This will not only improve the energy situation at the university, but will also help save energy at home.
- 30 April 2022
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Science and innovation
- Vol. 18 (2) , 30-43
УПРАВЛІННЯ ІННОВАЦІЙНИМ РОЗВИТКОМ ПІДПРИЄМСТВА НА ОСНОВІ ОЦІНКИ РЕСТРУКТУРИЗАЦІЙНОГО ПОТЕНЦІАЛУ
Вступ. Реалізація інноваційної реструктуризації підприємств дозволить досягти позитивних результатів у фінансово-економічному становищі, зростанні питомої ваги наукомісткої конкурентоспроможної інноваційної продукції та інтелектуальних послуг промисловості, що має посилити конкурентоспроможність продукції. Розробка нових механізмів інноваційної реструктуризації підприємств набуває особливої актуальності.Проблематика. Практично не дослідженими залишаються питання визначення та встановлення ролі, складу та основних критеріїв об’єктивної комплексної оцінки реструктуризаційного потенціалу для обґрунтування доцільності проведення інноваційної реструктуризації на підприємстві.Мета. Розробити методичний підхід до оцінки реструктуризаційного потенціалу підприємства, використання якого дозволить комплексно узагальнити отримані результати та прийняти оптимальні управлінські рішення.Матеріали й методи. Застосовано методичний підхід для розрахунку інтегрального показника за допомогою індексного та експертного методів оцінки та інтерпретації його величини лінгвістичними характеристиками шкали рівнів реструктуризаційного потенціалу.Результати. Удосконалено науково-методичний інструментарій оцінки реструктуризаційного потенціалу промислового підприємства, який ґрунтується на обчисленні системи локальних показників, сформованої з урахуванням функціональних складових реструктуризаційного потенціалу. Впровадження системи спостереження за локальними, комплексними показниками і загальним рівнем реструктуризаційного потенціалу дозволило розробити єдинийдля кожної групи підприємств алгоритм вибору відповідного виду реструктуризації та обрати відповідну стратегію розвитку.Висновки. Сформовано систему індикаторів і здійснено моделювання розроблених інтегральних показників реструктуризаційного потенціалу підприємства. Запропоновано методичний підхід щодо вибору стратегії розвитку підприємства для впровадження інноваційної реструктуризації залежно від рівня реструктуризаційного потенціалу.
- 30 April 2022
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Science and innovation
- Vol. 18 (2) , 30-43
УПРАВЛІННЯ ІННОВАЦІЙНИМ РОЗВИТКОМ ПІДПРИЄМСТВА НА ОСНОВІ ОЦІНКИ РЕСТРУКТУРИЗАЦІЙНОГО ПОТЕНЦІАЛУ
Вступ. Реалізація інноваційної реструктуризації підприємств дозволить досягти позитивних результатів у фінансово-економічному становищі, зростанні питомої ваги наукомісткої конкурентоспроможної інноваційної продукції та інтелектуальних послуг промисловості, що має посилити конкурентоспроможність продукції. Розробка нових механізмів інноваційної реструктуризації підприємств набуває особливої актуальності.Проблематика. Практично не дослідженими залишаються питання визначення та встановлення ролі, складу та основних критеріїв об’єктивної комплексної оцінки реструктуризаційного потенціалу для обґрунтування доцільності проведення інноваційної реструктуризації на підприємстві.Мета. Розробити методичний підхід до оцінки реструктуризаційного потенціалу підприємства, використання якого дозволить комплексно узагальнити отримані результати та прийняти оптимальні управлінські рішення.Матеріали й методи. Застосовано методичний підхід для розрахунку інтегрального показника за допомогою індексного та експертного методів оцінки та інтерпретації його величини лінгвістичними характеристиками шкали рівнів реструктуризаційного потенціалу.Результати. Удосконалено науково-методичний інструментарій оцінки реструктуризаційного потенціалу промислового підприємства, який ґрунтується на обчисленні системи локальних показників, сформованої з урахуванням функціональних складових реструктуризаційного потенціалу. Впровадження системи спостереження за локальними, комплексними показниками і загальним рівнем реструктуризаційного потенціалу дозволило розробити єдинийдля кожної групи підприємств алгоритм вибору відповідного виду реструктуризації та обрати відповідну стратегію розвитку.Висновки. Сформовано систему індикаторів і здійснено моделювання розроблених інтегральних показників реструктуризаційного потенціалу підприємства. Запропоновано методичний підхід щодо вибору стратегії розвитку підприємства для впровадження інноваційної реструктуризації залежно від рівня реструктуризаційного потенціалу.
- Open Access
- 30 April 2021
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 2 (4 (110)) , 48-54
Improved algorithm for matched-pairs selection of informative features in the problems of recognition of complex system states
The problem of computer diagnostics of complex systems is one of the non-trivial tasks of modern information technology. Such systems are, for example, computer networks, automatic and/or automated control systems for complex technological objects, including related to complex problems of environmental protection, biology, etc. In pattern recognition, one of the major problems is forming subspaces of informative features, which only in the «ensemble» allow diagnosing the states of such systems with a high degree of reliability. An effective approach to solving this problem based on the principles of inductive modeling of complex systems is proposed. The quality criterion for recognizing classes of patterns is formulated, which also makes it possible to evaluate the quality of the constructed ensemble of informative features. As an example, the problem of constructing an ensemble of informative features represented by a binary code based on the data of an experiment to determine the hazard levels of some plant protection products is considered. Real primary data on plant protection products used in practice were applied to recognize the effect of certain characteristics on the so-called integrated «hazard indicator». Comparative numerical estimates of the effectiveness of the proposed approach are given. In this case, there can be a fivefold gain in the amount of computations for a relatively small number of input features equal to 5 compared to the known algorithms of the class considered in the paper. It is shown that, from a practical point of view, the described algorithm has advantages over the known algorithms with brute-force search of feature subspaces in pattern recognition problems.
- 30 April 2021
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 2 (4 (110)) , 48-54
Open AccessImproved algorithm for matched-pairs selection of informative features in the problems of recognition of complex system states
The problem of computer diagnostics of complex systems is one of the non-trivial tasks of modern information technology. Such systems are, for example, computer networks, automatic and/or automated control systems for complex technological objects, including related to complex problems of environmental protection, biology, etc. In pattern recognition, one of the major problems is forming subspaces of informative features, which only in the «ensemble» allow diagnosing the states of such systems with a high degree of reliability. An effective approach to solving this problem based on the principles of inductive modeling of complex systems is proposed. The quality criterion for recognizing classes of patterns is formulated, which also makes it possible to evaluate the quality of the constructed ensemble of informative features. As an example, the problem of constructing an ensemble of informative features represented by a binary code based on the data of an experiment to determine the hazard levels of some plant protection products is considered. Real primary data on plant protection products used in practice were applied to recognize the effect of certain characteristics on the so-called integrated «hazard indicator». Comparative numerical estimates of the effectiveness of the proposed approach are given. In this case, there can be a fivefold gain in the amount of computations for a relatively small number of input features equal to 5 compared to the known algorithms of the class considered in the paper. It is shown that, from a practical point of view, the described algorithm has advantages over the known algorithms with brute-force search of feature subspaces in pattern recognition problems.
- 1 February 2019
- Published by Dnipro University of Technology in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
- No. 1,p. 83-89
Model of changing the stressed-deformed state of a polymer sheet during stretching
Model of changing the stressed-deformed state of a polymer sheet during stretching
- 1 February 2019
- Published by Dnipro University of Technology in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
- No. 1,p. 83-89
Model of changing the stressed-deformed state of a polymer sheet during stretching
Model of changing the stressed-deformed state of a polymer sheet during stretching