VNViktor Aleksandrovich Nesterov

Viktor Aleksandrovich Nesterov

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Viktor Aleksandrovich Nesterov has a total of 87 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Increasing the efficiency of coagulation of fine particles in cross ultrasonic fields

    by Sergey N. Tsyganok, Viktor A. Nesterov, Andrey V. Shalunov, Vladimir N. Khmelev

    The article is devoted to the study of the process of particle agglomeration in cross ultrasonic fields. It has been established that to achieve high efficiency of particle agglomeration, it is most effective to carry out comprehensive ultrasonic exposure using a tubular emitter and two longitudinally oscillating emitters installed at the ends. At the same time, to control the structure of the generated acoustic field and change the centers of coagulation of particles, it is proposed to carry out periodic exposure to a tubular emitter in two modes of vibration (bending-radial and radial). To retain particles during switching of oscillation modes, ultrasonic exposure is carried out with a longitudinally oscillating emitter. This ensures a degree of coarsening of 15 at a concentration of 1.8 g/m3.

  • Open Access

    Innovative Ultrasonic Spray Methods for Indoor Disinfection

    by Andrey Shalunov, Olga Kudryashova, Vladimir Khmelev, Dmitry Genne, Sergey Terentiev, Viktor Nesterov

    This study explores the challenges associated with dispersing disinfectant liquids for sanitizing individuals, indoor spaces, vehicles, and outdoor areas. Among the various approaches, fine aerosol sprays with a high particle surface area emerge as a particularly promising solution. Ultrasonic spraying, which leverages diverse mechanisms of ultrasound interaction with liquids, offers several distinct advantages. Notably, it enables the production of fine aerosols from liquids with a broad range of physical and chemical properties, including variations in purity, viscosity, and surface tension. This capability is especially critical for disinfectant liquids and suspensions, which often exhibit low surface tension and/or high viscosity. The article provides a comprehensive review of ultrasonic spraying methods and technologies developed by the authors’ team in recent years. It highlights innovative ultrasonic sprayers, including the latest designs, which are capable of generating aerosols with precise dispersion characteristics and high productivity from disinfectant liquids.


  • Open Access

    Innovative Ultrasonic Spray Methods for Indoor Disinfection

    by Andrey Shalunov, Olga Kudryashova, Vladimir Khmelev, Dmitry Genne, Sergey Terentiev, Viktor Nesterov

    This study addresses the challenge of dispersing disinfectant liquids for sanitizing people, indoor spaces, vehicles, and outdoor areas. Fine aerosol sprays with a large surface area of particles are considered the most promising solution for such tasks. The study identifies shortcomings in current spraying methods and highlights the potential of ultrasonic liquid atomization for improving disinfection processes. Innovative specialized ultrasonic atomizers are introduced, capable of producing aerosols with the required droplet size and efficiency from disinfectant liquids of varying viscosities, including those containing silver nanoparticles.


  • Open Access

    Identification of conditions for ultrasonic effect on gas-dispersed medium and creation of radiators to increase the efficiency of coagulation in devices with swirling flow

    by Vladimir Khmelev, Viktor Nesterov, Andrey Shalunov, Sergey Terentyev

    Relevance. The presence and uncontrolled distribution of aerosols of various substances in the air, which have a negative impact on humans, flora and fauna. This problem is especially acute in the extraction, processing and combustion of georesources. The most effective way to solve the problem is the use of high-intensity ultrasonic vibrations, the effect of which on aerosols causes convergence and agglomeration of small particles into large ones. However, at low concentrations, the particle coagulation efficiency is not sufficient to increase the recovery rate of gas treatment equipment. Therefore, there is a need to find new ways to optimize ultrasonic equipment for coagulation of fine particles in order to increase its efficiency. Aim. To determine the optimal conditions for ultrasonic influence on a swirling gas-dispersed flow, ensuring maximum efficiency of agglomeration of highly dispersed particles. Carrying out comparative studies of coagulation of particles when exposed to ultrasonic fields generated by different types of radiators and their combined effects will make it possible to determine the effectiveness of ultrasonic coagulation and the optimal design scheme of ultrasonic exposure. Objects. Coagulation of particles under ultrasonic impact, formed by various types of radiators. Methods. Computer modeling of the generated ultrasonic field using the finite element method using harmonic acoustic analysis. Finite element modeling and design of disk radiators using modal analysis. To determine the characteristics of the aerosol, a Malvern Spraytec Particle Analyzer was used. Results. The results of calculations and experiments have shown that the use of an extended ultrasonic tubular radiator operating on a bending-diametric mode of vibration and forming a ring standing wave with a sound pressure level of 162–165 dB as the main source of ultrasonic impact for devices with swirling flows may be the most energy efficient. Further increase in the efficiency of coagulation can only be achieved by the combined action of a tubular radiator and a longitudinally oscillating radiator. This significantly modifies the field structure and provides not only an increase in the sound pressure level (up to 167 dB), but also in the number of formed nodal surfaces (up to 44).

  • Open Access

    Increasing the efficiency of coagulation in resonant gaps due to acoustic flow formation

    by Vladimir Khmelev, Viktor Nesterov, Andrey Shalunov, Sergey Terentyev

    Relevance. The urgent need to eliminate environmental pollution from industrial emissions of various solid particles. At the same time, maximum attention is paid to cleaning exhaust gases from particles of 2.5 microns in size or less. One of the most promising ways to increase the efficiency of existing gas purification equipment in capturing such particles is their coagulation by exposing the gas flow to high-intensity acoustic vibrations of ultrasonic frequency. However, at low concentrations, even at the maximum permissible sound pressure level, the coagulation efficiency of particles smaller than 2.5 microns is insufficient to increase the recovery rate of gas cleaning equipment. Therefore, there is an urgent need to find new ways to further improve the efficiency of ultrasonic coagulation of particles smaller than 2.5 μm. Aim. To determine the conditions for the formation of vortex flows in ultrasonic fields with the maximum ultrasonic influence in terms of sound pressure level. Conducting comparative studies of the coagulation of particles with a size of 2.5 microns with and without vortex flows. This will make it possible to determine the real values of increasing the efficiency of ultrasonic coagulation during turbulization of a gas-dispersed flow by acoustic flows in comparison with coagulation in a uniform ultrasonic field and without it. Objects. Coagulation of particles under the influence of homogeneous and inhomogeneous ultrasonic fields. Methods. Computer modeling of the formed ultrasonic field by the finite element method using harmonic acoustic analysis. The paper considers the experimental method for studying the process of combining particles under the influence of ultrasonic vibrations. To determine the characteristics of an aerosol during experimental studies, a TIPAS-1 meter based on the small-angle scattering method and the spectral transparency method was used. Results. The paper introduces the results of studies of coagulation of particles with a size of 2.5 microns or less in an ultrasonic field formed in resonant gaps by oscillating disk emitters. The authors proposed to increase the efficiency of coagulation in resonant gaps through the use of ultrasonic disk emitters capable of forming alternating zones of maximum and minimum amplitude oscillations in the resonant gaps. The creation of such zones ensured the formation of vortex-type acoustic flows capable of moving particles within the nodal regions of a standing wave and between them. The involvement of small particles in the formed flows made it possible to increase the probability of their collision. It was established that more effective ultrasonic coagulation provides an increase in the degree of inertial capture for particles of 2.5 microns in size by 6% – from 89 to 95%, for particles of 1.5 microns in size by 7% – from 85 to 92%, and for particles of 0.5 microns by 9% – from 76 to 85%.

  • Open Access

    ИНТЕНСИФИКАЦИЯ ПРОЦЕССА СУШКИ ВАТЫ ПРИ ПОМОЩИ УЛЬТРАЗВУКА

    by Владимир Николаевич Хмелёв, Андрей Викторович Шалунов, Мария Константиновна Кошелева, Иван Александрович Маняхин, Сергей Александрович Терентьев, Виктор Александрович Нестеров, Николай Александрович Азаров

    В статье приведены результаты экспериментальных исследований процесса ультразвуковой сушки текстильной ваты. Воздействие ультразвуковыми колебаниями осуществлялось в бесконтактном режиме, а для увеличения уровня звукового давления в сушильной камере создавалась стоячая звуковая волна. Выявлено, что длительность процесса ультразвуковой сушки ваты при различных температурах и скоростях потока сушильного агента значительно (до 7,5 раз) сокращается по сравнению с конвективной сушкой при одинаковых условиях проведения экспериментов. Также проведены исследования энергетической эффективности ультразвуковой сушки ваты, в результате которых выявлено, что при низких скоростях потока сушильного агента (1 м/с) происходит экономия электрической энергии до 75 % по сравнению с конвективной сушкой при тех же условиях проведения экспериментов.

  • Improving agglomeration efficiency of aerosols with sizes less than 2.5 µm by generation of vortex streams in inhomogeneous ultrasonic field

    by Vladimir N. Khmelev, Andrey V. Shalunov, Viktor A. Nesterov, Sergey A. Terentiev, Roman N. Golykh


  • Open Access

    Experimental and computer study of the mechanism and identification of conditions for energy-efficient removal of moisture from materials under ultrasonic exposure

    by Vladimir Khmelev, Andrey Shalunov, Sergey Terentiev, Roman Golykh, Viktor Nesterov

    The article is devoted to investigation of energy-efficient moisture removal from capillary-porous materials. Moisture is removed by dispersion at collapse of cylindrical cavitation bubbles, formed by ultrasonic vibrations in the capillaries of the material. Mathematical model, which allowed to investigate the mechanism of moisture dispersion, has been developed. Necessity of realization of cavitation bubble full life cycle in capillary (slow growth, rapid expansion with deformation, collapse) was found. An optimal range of sound pressure levels from 150 dB (“critical level” at which dispersion of water from capillary starts) up to 170 dB (dispersion productivity growth stops due to cavitation bubbles reaching maximum size equal to diameter of capillary) was determined. It is shown that the size of the dewatered sample for maximum drying efficiency should correspond to the ultrasonic wavelength in air. Ultrasonic dispersion of liquid during drying was confirmed experimentally. It is found that for significant reduction of drying time (up to 50% and more) it is necessary to affect in the range of 165–170 dB. And the materials to be dried must be placed as particles or layers having dimensions or thicknesses corresponding to the length of the ultrasonic wave in air. The implementation of ultrasonic drying, on the example of food products (beets) provided a reduction in drying time of 1.9 times, while reducing energy costs by 1.7 times in comparison with convective drying.


  • Ultrasonic dehydration of materials without liquid-vapor transition

    by Vladimir Khmelev, Andrey Shalunov, Sergey Terentiev, Roman Golykh, Viktor Nesterov


  • Open Access

    The Development and Analysis of a Multistage Spraying Method for Liquids in an Ultrasonic Field

    by Andrey Shalunov, Vladimir Khmelev, Sergey Terentiev, Viktor Nesterov, Dmitry Genne

    Spraying various liquids (primarily aqueous solutions of various substances) is widely used in various technological processes. For most of them, high dispersibility and a narrow droplet size distribution are essential. Ultrasonic spraying allows these parameters to be achieved. However, the higher the dispersity of droplets produced by ultrasonic spraying, the lower the spray productivity. To solve this problem, we propose a method of multistage spraying, consisting of the generation of a large number of particles of large initial size (to ensure high productivity) and their subsequent destruction by propagation in a periodic ultrasonic field (to ensure small droplet sizes at high productivity). To experimentally determine the capabilities of this technique, a tubular emitter in the shape of a cylinder with a stepped-variable cross-section was designed. The configuration of the ultrasonic field inside the emitter (22.2 kHz; 182 dB) implements three-stage spraying (the number of sputtering stages corresponds to the number of anti-nodes along the emitter axis). The effectiveness of the proposed and developed technique, suitable for the generation of droplets smaller than 40 µm, with performance exceeding the known ultrasonic spray techniques by at least 10-fold, was confirmed in the course of the conducted research.