STSergey Terentiev

Sergey Terentiev

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Sergey Terentiev has a total of 26 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Ensuring the specified productivity of liquid media ultrasonic atomization

    by Vladimir N. Khmelev, Andrey V. Shalunov, Sergey A. Terentiev, Dmitry V. Genne

    Relevance. Ultrasonic atomization is widely used in many areas of industry for processing liquid media and melts into particles of a given size, safe disposal of gas waste, and spray drying. The feasibility of using ultrasonic atomization is due to the possibility of obtaining fine particles of a monodisperse composition with minimal energy costs compared to other atomization methods. Since atomization is carried out by feeding a liquid medium onto a surface oscillating at an ultrasonic frequency, it is necessary to form on this surface the maximum amount of liquid placed in a layer of the optimal thickness for atomization. To ensure maximum productivity, it is not enough to feed the sprayed liquid onto the surface through one channel, and increasing its diameter does not solve the problem due to the impossibility of distributing a large amount of liquid on the surface around one feed channel with the optimal thickness. Aim is due to the need to ensure the supply of liquid onto the oscillating surface through multiple channels on this surface in order to ensure the highest possible atomization performance without increasing the size of the resulting droplets. Methods. The paper proposes a method for calculating the shape of the spray surface and the distance between the holes through which liquid is supplied to the oscillating surface to ensure a given spray performance. Results and Conclusions. The work resulted in an experimental determination of the dependence of the liquid spreading radius R0 on viscosity and surface tension. It was found that with an increase in viscosity, the liquid spreading radius decreases and an increase in the oscillation amplitude is required for spraying. With a decrease in the surface tension coefficient, the liquid spreading radius R0 increases, and the oscillation amplitude for spraying can decrease. The proposed and developed method, as well as certain numerical values of the R0 parameter, made it possible to design an ultrasonic atomizer of liquid media with the formation of sprayed droplets with an average diameter of no more than 65 μm, with a productivity of more than 15 ml / s at a total power consumption of less than 150 VA. For citation: Khmelev V.N., Shalunov A.V., Terentiev S.A., Genne D.V. Ensuring the specified productivity of liquid media ultrasonic atomization. Bulletin of the Tomsk Polytechnic University. Geo Assets Engineering, 2026, vol. 337, no. 7, pp. 16-24. https://doi.org/10.18799/24131830/2026/7/5223

  • Open Access

    Dual-frequency ultrasonic emitter system for dust and smoke coagulation

    by Vladimir N. Khmelev, Андрей Викторович Шалунов, Sergey N. Tsyganok, Sergey A. Terentiev, Владислав Анатольевич Шакура, Сергей Николаевич Цыганок, Сергей Александрович Терентьев

    Relevance. The lack of effective, safe and environmentally friendly methods for settling suspended solid particles and smoke in processes related to the extraction, transportation and processing of minerals, and fire extinguishing. Aim. Development and research of a dual-frequency ultrasonic emitter system to improve the efficiency of settling hazardous dust and smoke suspensions. Methods. Experimental studies aimed at obtaining data for constructing radiation patterns, calculating the linear attenuation and acoustic power of ultrasonic emitters. Results and conclusions. The authors have developed the ultrasonic disk emitters, consisting of a piezoelectric modernized transducer, made according to the Langevin design scheme and a bending-oscillating emitter, equipped with reflectors, phase-aligning cones and horns. They developed the experimental stand, consisting of two simultaneously operating ultrasonic disk emitters with close natural resonant frequencies and a sound pressure meter. It was shown that the use of reflectors increased the total sound pressure of two ultrasonic emitters by 3–3.5 dB. The angle of the main lobe of the directivity pattern was ±7.5 degrees. The use of phase-aligning cones ensured the formation of acoustic oscillations in one phase from oscillating surfaces in different phases and increased the sound pressure of the system by 8–9 dB. When two ultrasonic emitters simultaneously act on the air environment, a zone of occurrence of beats at a low frequency of acoustic oscillations (300 Hz) is formed, while the sound pressure reaches 97.6 dB at a distance of 1 m and 77.1 dB at a distance of 20 m. It was established that the sedimentation of cement dust occurs at least 300 times faster than with natural sedimentation, and less than 50 times faster than with the implementation of the effect of one disk emitter of the same area. The time of action required for the sedimentation of smoke arising from the combustion of pine sawdust did not exceed 10 seconds to establish a visibility range of at least 10 m.

  • Open Access

    Cavitation-induced droplet fragmentation in focused ultrasonic fields

    by Olga Kudryashova, Andrey Shalunov, Vladimir Khmelev, Sergey Terentiev, Alexander Sinkin


  • Open Access

    Calculation of the surface shape of an ultrasonic atomizer to form a spray torch of the required shape

    by Andrey Shalunov, Sergey Terentiev, Sergey Titov, Natalia Titova

    The article presents a calculation method for the shape of the ultrasonic atomizer surface. The parameters influencing the shape of the spray torch and its performance are considered. Ultrasonic emitters are manufactured according to the obtained calculation formulas and their main technical characteristics are obtained. The developed calculation method allows creating multifunctional ultrasonic atomizers capable of solving various technological problems.

  • Open Access

    Innovative Ultrasonic Spray Methods for Indoor Disinfection

    by Andrey Shalunov, Olga Kudryashova, Vladimir Khmelev, Dmitry Genne, Sergey Terentiev, Viktor Nesterov

    This study explores the challenges associated with dispersing disinfectant liquids for sanitizing individuals, indoor spaces, vehicles, and outdoor areas. Among the various approaches, fine aerosol sprays with a high particle surface area emerge as a particularly promising solution. Ultrasonic spraying, which leverages diverse mechanisms of ultrasound interaction with liquids, offers several distinct advantages. Notably, it enables the production of fine aerosols from liquids with a broad range of physical and chemical properties, including variations in purity, viscosity, and surface tension. This capability is especially critical for disinfectant liquids and suspensions, which often exhibit low surface tension and/or high viscosity. The article provides a comprehensive review of ultrasonic spraying methods and technologies developed by the authors’ team in recent years. It highlights innovative ultrasonic sprayers, including the latest designs, which are capable of generating aerosols with precise dispersion characteristics and high productivity from disinfectant liquids.


  • Open Access

    Innovative Ultrasonic Spray Methods for Indoor Disinfection

    by Andrey Shalunov, Olga Kudryashova, Vladimir Khmelev, Dmitry Genne, Sergey Terentiev, Viktor Nesterov

    This study addresses the challenge of dispersing disinfectant liquids for sanitizing people, indoor spaces, vehicles, and outdoor areas. Fine aerosol sprays with a large surface area of particles are considered the most promising solution for such tasks. The study identifies shortcomings in current spraying methods and highlights the potential of ultrasonic liquid atomization for improving disinfection processes. Innovative specialized ultrasonic atomizers are introduced, capable of producing aerosols with the required droplet size and efficiency from disinfectant liquids of varying viscosities, including those containing silver nanoparticles.


  • Open Access

    Identification of conditions for ultrasonic effect on gas-dispersed medium and creation of radiators to increase the efficiency of coagulation in devices with swirling flow

    by Vladimir Khmelev, Viktor Nesterov, Andrey Shalunov, Sergey Terentyev

    Relevance. The presence and uncontrolled distribution of aerosols of various substances in the air, which have a negative impact on humans, flora and fauna. This problem is especially acute in the extraction, processing and combustion of georesources. The most effective way to solve the problem is the use of high-intensity ultrasonic vibrations, the effect of which on aerosols causes convergence and agglomeration of small particles into large ones. However, at low concentrations, the particle coagulation efficiency is not sufficient to increase the recovery rate of gas treatment equipment. Therefore, there is a need to find new ways to optimize ultrasonic equipment for coagulation of fine particles in order to increase its efficiency. Aim. To determine the optimal conditions for ultrasonic influence on a swirling gas-dispersed flow, ensuring maximum efficiency of agglomeration of highly dispersed particles. Carrying out comparative studies of coagulation of particles when exposed to ultrasonic fields generated by different types of radiators and their combined effects will make it possible to determine the effectiveness of ultrasonic coagulation and the optimal design scheme of ultrasonic exposure. Objects. Coagulation of particles under ultrasonic impact, formed by various types of radiators. Methods. Computer modeling of the generated ultrasonic field using the finite element method using harmonic acoustic analysis. Finite element modeling and design of disk radiators using modal analysis. To determine the characteristics of the aerosol, a Malvern Spraytec Particle Analyzer was used. Results. The results of calculations and experiments have shown that the use of an extended ultrasonic tubular radiator operating on a bending-diametric mode of vibration and forming a ring standing wave with a sound pressure level of 162–165 dB as the main source of ultrasonic impact for devices with swirling flows may be the most energy efficient. Further increase in the efficiency of coagulation can only be achieved by the combined action of a tubular radiator and a longitudinally oscillating radiator. This significantly modifies the field structure and provides not only an increase in the sound pressure level (up to 167 dB), but also in the number of formed nodal surfaces (up to 44).

  • Open Access

    Increasing the efficiency of coagulation in resonant gaps due to acoustic flow formation

    by Vladimir Khmelev, Viktor Nesterov, Andrey Shalunov, Sergey Terentyev

    Relevance. The urgent need to eliminate environmental pollution from industrial emissions of various solid particles. At the same time, maximum attention is paid to cleaning exhaust gases from particles of 2.5 microns in size or less. One of the most promising ways to increase the efficiency of existing gas purification equipment in capturing such particles is their coagulation by exposing the gas flow to high-intensity acoustic vibrations of ultrasonic frequency. However, at low concentrations, even at the maximum permissible sound pressure level, the coagulation efficiency of particles smaller than 2.5 microns is insufficient to increase the recovery rate of gas cleaning equipment. Therefore, there is an urgent need to find new ways to further improve the efficiency of ultrasonic coagulation of particles smaller than 2.5 μm. Aim. To determine the conditions for the formation of vortex flows in ultrasonic fields with the maximum ultrasonic influence in terms of sound pressure level. Conducting comparative studies of the coagulation of particles with a size of 2.5 microns with and without vortex flows. This will make it possible to determine the real values of increasing the efficiency of ultrasonic coagulation during turbulization of a gas-dispersed flow by acoustic flows in comparison with coagulation in a uniform ultrasonic field and without it. Objects. Coagulation of particles under the influence of homogeneous and inhomogeneous ultrasonic fields. Methods. Computer modeling of the formed ultrasonic field by the finite element method using harmonic acoustic analysis. The paper considers the experimental method for studying the process of combining particles under the influence of ultrasonic vibrations. To determine the characteristics of an aerosol during experimental studies, a TIPAS-1 meter based on the small-angle scattering method and the spectral transparency method was used. Results. The paper introduces the results of studies of coagulation of particles with a size of 2.5 microns or less in an ultrasonic field formed in resonant gaps by oscillating disk emitters. The authors proposed to increase the efficiency of coagulation in resonant gaps through the use of ultrasonic disk emitters capable of forming alternating zones of maximum and minimum amplitude oscillations in the resonant gaps. The creation of such zones ensured the formation of vortex-type acoustic flows capable of moving particles within the nodal regions of a standing wave and between them. The involvement of small particles in the formed flows made it possible to increase the probability of their collision. It was established that more effective ultrasonic coagulation provides an increase in the degree of inertial capture for particles of 2.5 microns in size by 6% – from 89 to 95%, for particles of 1.5 microns in size by 7% – from 85 to 92%, and for particles of 0.5 microns by 9% – from 76 to 85%.

  • Open Access

    Experimental study of the efficiency of heat and mass transfer during ultrasonic drying of textile materials

    by Vladimir Khmelev, Andrey Shalunov, Ivan Manyakhin, Sergey Terentiev, Viktor Nesterov

    The article presents the results of experimental studies of the process of ultrasonic drying of textile wool. It was found that additional ultrasonic exposure makes it possible to accelerate convective drying up to 7.5 times under constant initial experimental conditions. When cotton wool is exposed to ultrasound, thermal diffusion occurs. Water molecules move from the more heated center of the drying object to the less heated surface.

  • Open Access

    Influence of ultrasonic vibrations on the temperature of the dried material

    by Vladimir Khmelev, Andrey Shalunov, Sergey Terentiev, Viktor Nesterov, Ivan Manyakhin, Natalya Titova

    The article presents studies on ultrasonic drying of agglomerated cork plug samples. It was revealed that the ultrasonic standing wave mode provides an increase in the drying speed compared to the traveling wave mode. It has also been shown that the energy of ultrasonic vibrations is absorbed in the cork material. In this case, the temperature inside the sample is 10 °C higher than on its surface. This helps to increase the rate of moisture release from the internal layers to the surface of the sample due to thermal diffusion.